Cytotoxic potential of Curcuma caesia rhizome extract and derived gold nanoparticles in targeting breast cancer cell lines.

Among all types of cancer, breast cancer is the most aggressive, as it is responsible for most of the cancer related death of women. Though several medical therapies are available, the scenario of curing such disease is not favorable. Therefore, there is an urgent need to find alternatives to deal with it. The knowledge of ethnopharmacy might give some better solution to mitigate such deadly diseases. Here, we are using the rhizome of Curcuma caesia Roxb. (Black turmeric), as well as gold nanoparticles (GNPs) synthesized with it to check their specific cytotoxic potentiality against breast cancer cell lines. In our study, ethanolic extract was used to evaluate the cytotoxic effect of the rhizome. GNPs were synthesized by using the same extract and characterized by UV-Vis spectroscopy (UV-Vis), Transmission electron microscopy (TEM), X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), and Thermo gravimetric analysis (TGA). The TEM, XRD, FTIR and TGA results revealed the successful synthesis and capping of GNPs. The UV-Vis Spectrum showed a sharp and narrow absorption peak at 550 nm and HRTEM confirmed both the stability and successful synthesis of the nanoparticles. The MTT assay of the crude extract revealed strong cytotoxicity against breast cancer cell lines viz. MCF-7 (ER+) and MDA MB-231 (Triple Negative Breast Cancer, TNBC) by showing IC50 values as 15.70 ± 0.029 and 21.57 ± 0.031 µg/mL respectively. For extract mediated GNPs, the IC50 values were found to be 6.44 ± 0.045 and 5.87 ± 0.031µg/mL respectively in both breast cancer cell lines. As the IC50 value for GNPs was found to be much lower than that of crude extract, it indicates a higher efficiency of the GNP. However, both the rhizome extract and its mediated GNPs showed more toxicity towards MDA MB-231 (TNBC) cell lines. It was also observed that the GNPs showed more toxicity towards TNBC cell lines compared to the rhizome extract. No toxicity was found in case of other cell lines such as L 929 and HeLa for both crude extract as well as for GNPs. These observations suggests that both the crude rhizome extract and its derived GNPs exhibit selective cytotoxic potential against breast cancer cell lines, which might be exploited for target specific treatment. Moreover, with an understanding of the mechanism behind the GNPs therapeutic efficiency, it can be developed as a personalized therapy to treat such type of cancers.

Papaya latex mediated synthesis of prism shaped proteolytic gold nanozymes.

Beyond natural enzymes, the artificially synthesized nanozymes have attracted a significant interest as it can overcome the limitations of the former. Here, we report synthesis of shape controlled nanozymes showing proteolytic activity using Carica papaya L. (papaya) latex. The nanozymes synthesized under optimized reaction conditions exhibited sharp SPR peak around 550 nm with high abundance (45.85%) of prism shaped particles. FTIR analysis and coagulation test indicated the presence of papaya latex enzymes as capping agents over the gold nanoprisms. The milk clot assay and the inhibition test with egg white confirmed the proteolytic activity of the nanozymes and the presence of cysteine protease on it, respectively. The nanozymes were found to be biocompatible and did not elicit any toxic response in both in-vitro and in-vivo study. Based on our findings, we envisage that these biocompatible, shape-specific nanozymes can have potential theragnostic applications.

Genome Sequences of SARS-CoV-2 Sublineage B.1.617.2 Strains from 12 Children in Chattogram, Bangladesh.

We announce the complete genome sequences of 12 severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) sublineage B.1.617.2 strains (Delta variant) obtained from nasopharyngeal and oropharyngeal swab samples from 12 pediatric patients in Chittagong, Bangladesh, displaying COVID-19 symptoms. Oxford Nanopore MinION sequencing technology was used to generate the genomic sequences.

Management of neglected elbow dislocations in a setting with low clinical resources.

OBJECTIVE: To investigate the effect of open reduction operative treatment in neglected elbow dislocation. METHODS: Between January 2009 and October 2010, 13 patients (mean, 27 years, nine men and four women) with old unreduced posterior dislocation of the elbow were treated by open reduction and removal of fibrous tissue between distal humerus and ulna with Kirschner wire fixation with or without triceps lengthening in our hospital. RESULTS: The patients were followed up for a mean of 18 (range, 14-22) months. The mean operating time was 69.53 (range, 56-90) min. Mean operative blood loss 361.53 mL (range, 300-450 mL), mean tourniquet time 51.92 min (range, 46-70 min). According to the Mayo Elbow Performance Index at the final follow-up, 11 patients had satisfactory outcomes (six excellent, five good) and two patients had unsatisfactory outcomes (one fair and one poor). The mean score was 87. Nine patients had no pain, two had mild pain during repetitive elbow movements or weight lifting, and two had moderate pain. The mean pain score was 38 (range, 15-45). At the final follow-up, two patients had signs of instability; the mean score was 15. Seven achieved a flexion range of 105° to 130°, two achieved 100°, two achieved 95°, one achieved 80°, and one 60°. CONCLUSION: Operative treatment of late-presenting, unreduced elbow dislocation is effective in restoring the joint to a painless, stable and functional limb.

Effect of pullulan/poly(vinyl alcohol) blend system on the montmorillonite structure with property characterization of electrospun pullulan/poly(vinyl alcohol)/montmorillonite nanofibers.

Nanofibers of the composite of pullulan (PULL), poly(vinyl alcohol) (PVA), and montmorillonite clay (MMT) were prepared using electrospinning method in aqueous solutions. Pullulan is an interesting natural polymer for many of its merits and good properties. Because of biocompatibility and non-toxicity of PVA, it could be used in numerous fields. Scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared (FTIR), X-ray diffraction (XRD), and thermal gravimetric analysis (TGA) were done to characterize the PULL/PVA/MMT nanofibers morphology and properties. XRD patterns and FTIR data demonstrated that there were good interactions between PULL and PVA caused by possibly hydrogen bonds. Moreover, XRD data and TEM images indicated that intercalated and exfoliated MMT nanoplatelets can be obtained within the PULL/PVA/MMT nanofibers depending on the PULL/PVA blend ratios. Furthermore, the thermal stability and mechanical property (tensile strength) of PULL/PVA/MMT nanofibers could be enhanced more by exfoliated MMT nanoplatelets than intercalated structures of that nanoplatelets.

Synthesis of poly(vinyl acetate-methyl methacrylate) copolymer microspheres using suspension polymerization.

Poly(vinyl acetate-methyl methacrylate) (VAc-MMA) copolymer microspheres were prepared using suspension polymerization at low temperature initiated with 2,2'-azobis(2,4-dimethyl valeronitrile) (ADMVN). The poly(VAc-MMA) copolymer microspheres can be used over a large area where homopolymers, polyvinyl acetate (PVAc) and methyl methacrylate (PMMA) microspheres are capable of being put to use. The prepared microspheres were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), differential scanning calorimetry (DSC) and thermal gravimetric analysis (TGA). Obtained copolymer microspheres which have 200 µm average diameter and higher thermal stability than those of homopolymer.

Simultaneous determination of acetylsalicylic acid and caffeine in pharmaceutical formulation by first derivative synchronous fluorimetric method.

A sensitive, rapid, and specific assay has been developed for the simultaneous determination of acetylsalicylic acid and caffeine in commercial tablets based on their natural fluorescence. The mixture of these drugs was resolved by first derivative synchronous fluorimetric technique using two scans. At Deltalambda=106 nm, using first derivative synchronous scanning, only acetylsalicylic acid yields a detectable signal at 316 nm (peak to zero method) which is unaffected by caffeine. At Deltalambda=30 nm, the signal of caffeine at 288 nm (peak to zero method) is not affected by acetylsalicylic acid. The range of application is between 0.021 and 41.62 microg ml(-1) (correlation coefficient, R=0.9995) for acetylsalicylic acid and between 0.4486 and 44.86 microg ml(-1) (correlation coefficient, R=0.99786) for caffeine. The recovery range of 98.40-102% for acetylsalicylic acid and 90-100.5% for caffeine from their synthetic mixture was reported. Overall recovery of both compounds about 97-99% for acetylsalicylic acid and 97-98% for caffeine was obtained from real sample analysis. The detection limits are 0.0013 microg ml(-1) and 0.0306 microg ml(-1) for acetylsalicylic acid and caffeine, respectively. The relative standard deviation (n=10) for 20 microg ml(-1) of acetylsalicylic acid is 2.75% and for 2.2 microg ml(-1)of caffeine is 1.7%.

Treatment of colored effluent of the textile industry in Bangladesh using zinc chloride treated indigenous activated carbons.

The adsorption of colored compounds from the textile dyeing effluents of Bangladesh on granulated activated carbons produced from indigenous vegetable sources by chemical activation with zinc chloride was studied. The most important parameters in chemical activation were found be the chemical ratio of ZnCl2 to feed (3:1), carbonization temperature (450-465 degrees C) and activation time (80 min). The adsorbances at 511 nm (red effluent) and 615 nm (blue effluent) were used for color estimation. It is established that at optimum temperature (50 degrees C), time of contact (30-40 min) and adsorbent loading (2 g l(-1)), activated carbons developed from Segun saw-dust and water hyacinth showed substantial capability to remove coloring materials from the effluents. It is observed that adsorption of reactive dyes by all sorts of activated carbons is higher than disperse dyes. It is explained that activated carbon, because of its acidic nature, can better adsorb reactive dye particles containing large number of nitrogen sites and -SO3Na group in their structure. The use of carbons would be economical, as saw-dust and water hyacinth are waste products and abundant in Bangladesh.