Synthesis of the large pore aluminophosphate STA-1 and its application as a catalyst for the Beckmann rearrangement of cyclohexanone oxime.

The preparation of stable large pore aluminophosphate (AlPO) zeotypes offers materials for applications in adsorption and catalysis. Here we report the synthesis of the pure AlPO with the SAO topology type (AlPO STA-1) using N,N'-diethylbicyclo[2.2.2]oct-7-ene-2,3:5,6-dipyrrolidine (DEBOP) as the organic structure directing agent in the presence of fluoride. The AlPO STA-1 can be rendered microporous (pore volume 0.36 cm3 g-1) via calcination and the calcined form remains stable in the presence of moisture. The structure of the dehydrated form has been established by Rietveld refinement (tetragonal P4̄n2, a = 13.74317(10) Å, c = 21.8131(5) Å, V = 4119.94(16) Å3). Multinuclear 27Al and 31P MAS NMR, together with 2D COSY and CASTEP NMR calculations, enables resolution and assignment of the signals from all crystallographically distinct Al and P framework sites. Structural elucidation of the as-prepared aluminophosphate-fluoride is more challenging, because of the presence of partially protonated OSDA molecules in the 3D-connected channel system and in particular because the fluoride ions coordinate with positional disorder to some of the Al atoms to give 5-fold as well as tetrahedrally-coordinated framework Al species. These are postulated to occupy Al-F-Al bridging sites, where they are responsible for distortion of the framework [P4̄n2, a = 13.3148(9) Å, c = 22.0655(20) Å, V = 3911.9(7) Å3]. Calcination and removal of fluoride ions and OSDAs allows the framework to expand to its relaxed configuration. The SAO topology type aluminophosphate can also be synthesised with small amounts of Si and Ge in the framework, and these SAPO and GeAPO STA-1 materials are also stable to template removal. IR spectroscopy with CO as a probe at 123 K indicates all have weak-to-mild acidity, increasing in the order AlPO < GeAPO < SAPO. These STA-1 materials have been investigated for their activity in the Beckmann rearrangement of cyclohexanone oxime to ε-caprolactam at 598 K: while all are active, the AlPO form is favoured due to its high selectivity and slow deactivation, both of which are a consequence of its very weak acid strength, which is nevertheless sufficient to catalyse the reaction.

An NMR crystallographic characterisation of solid (+)-usnic acid.

We use a combination of one- and two-dimensional solid-state nuclear magnetic resonance (NMR) spectroscopy and density functional theory (DFT) calculations to obtain a full assignment of the 1H and 13C signals for solid (+)-usnic acid, which contains two molecules in the asymmetric unit. By combining through-space 1H-1H correlation data with computation it is possible to assign signals not just to the same molecules (relative assignment) but to assign the signals to specific crystallographic molecules (absolute assignment). Variable-temperature measurements reveal that there is some variation in many of the 13C chemical shifts with temperature, likely arising from varying populations of different tautomeric forms of the molecule. The NMR spectrum of crystalline (+)-usnic acid is then compared with that of ground Usnea dasopoga lichen (the source material of the usnic acid). The abundance of usnic acid is so great in the lichen that this natural product can be observed directly in the NMR spectrum without further purification. This natural sample of usnic acid appears to have the same crystalline form as that in the pure commercial sample.

Site-directed cation ordering in chabazite-type AlxGa1-xPO4-34 frameworks revealed by NMR crystallography.

We report the first synthesis of the mixed-metal chabazite-type AlxGa1-xPO4-34(mim) solid solution, containing 1-methylimidazolium, mim, as structure directing agent (SDA), from the parent mixed-metal oxide solid solution, γ-(AlxGa1-x)2O3. This hitherto unreported family of materials exhibits complex disorder, arising from the possible distributions of cations over available sites, the orientation of the SDA and the presence of variable amounts of water, which provides a prototype for understanding structural subtleties in nanoporous materials. In the as-made forms of the phosphate frameworks, there are three crystallographically distinct metal sites: two tetrahedral MO4 and one octahedral MO4F2 (M = Al, Ga). A combination of solid-state NMR spectroscopy and periodic DFT calculations reveals that the octahedral site is preferentially occupied by Al and the tetrahedral sites by Ga, leading to a non-random distribution of cations within the framework. Upon calcination to the AlxGa1-xPO4-34 framework, all metal sites are tetrahedral and crystallographically equivalent in the average R3̄ symmetry. The cation distribution was explored by 31P solid-state NMR spectroscopy, and it is shown that the non-random distribution demonstrated to exist in the as-made materials would be expected to give remarkably similar patterns of peak intensities to a random distribution owing to the change in average symmetry in the calcined materials.

Organosolv Pretreatment of Cocoa Pod Husks: Isolation, Analysis, and Use of Lignin from an Abundant Waste Product.

Cocoa pod husks (CPHs) represent an underutilized component of the chocolate manufacturing process. While industry's current focus is understandably on the cocoa beans, the husks make up around 75 wt % of the fruit. Previous studies have been dominated by the carbohydrate polymers present in CPHs, but this work highlights the presence of the biopolymer lignin in this biomass. An optimized organosolv lignin isolation protocol was developed, delivering significant practical improvements. This new protocol may also prove to be useful for agricultural waste-derived biomasses in general. NMR analysis of the high quality lignin led to an improved structural understanding, with evidence provided to support deacetylation of the lignin occurring during the optimized pretreatment. Chemical transformation, using a tosylation, azidation, copper-catalyzed click protocol, delivered a modified lignin oligomer with an organophosphorus motif attached. Thermogravimetric analysis was used to demonstrate the oligomer's potential as a flame-retardant. Preliminary analysis of the other product streams isolated from the CPHs was also carried out.

Synthesis of FeAPO-34 Molecular Sieve under Ionothermal Condition.

FeAPO-34 with a chabazite (CHA) topology structure was successfully synthesized under ionothermal conditions using 1-ethyl-3-methylimidazoliumchloride (EMIMCl) ionic liquid in the presence of ethylenediamine (EDA). The material was characterized using powder X-ray diffraction (XRD), thermogravimetric analysis (TGA), elemental analyses, and solid-state NMR spectroscopy. Incorporation of iron within the covalent framework of the material was confirmed by the presence of broad signals between 1000 and 14,000 ppm in the 31P NMR spectrum, corresponding to the P(OFe)x(OAl)4-x species.

Origin of the temperature dependence of 13C pNMR shifts for copper paddlewheel MOFs.

An efficient protocol for the calculation of 13C pNMR shifts in metal-organic frameworks based on Cu(ii) paddlewheel dimers is proposed, which involves simplified structural models, optimised using GFN2-xTB for the high-spin state, and CAM-B3LYP-computed NMR and EPR parameters. Models for hydrated and activated HKUST-1 and hydrated STAM MOFs with one, two and three Cu dimers have been used. The electronic ground states are low-spin and diamagnetic, with pNMR shifts arising from thermal population of intermediate- and high-spin excited states. Treating individual spin configurations in a broken symmetry (BS) approach, and selecting two or more of these to describe individual excited states, the magnetic shieldings of these paramagnetic states are evaluated using the approach by Hrobárik and Kaupp. The total shielding is then evaluated from a Boltzmann distribution between the energy levels of the chosen configurations. The computed pNMR shifts are very sensitive to temperature and, therefore, to the relative energies of the BS spin states. In order to reproduce the temperature dependence of the pNMR shifts seen in experiment, some scaling of the calculated energy gaps is required. A single scaling factor was applied to all levels in any one system, by fitting to experimental results at several temperatures simultaneously. The resulting scaling factor decreases with an increasing number of dimer units in the model (e.g., from ∼1.7 for mono-dimer models to 1.2 for tri-dimer models). The approach of this scaling factor towards unity indicates that models with three dimers are approaching a size where they can be considered as reasonable models for the 13C shifts of infinite MOFs. The observed unusual temperature dependencies in the latter are indicated to arise both from the "normal" temperature dependence of the pNMR shifts of the paramagnetic states and the populations of these states in the thermal equilibrium.

Single-step synthesis and interface tuning of core-shell metal-organic framework nanoparticles.

Control over the spatial distribution of components in metal-organic frameworks has potential to unlock improved performance and new behaviour in separations, sensing and catalysis. We report an unprecedented single-step synthesis of multi-component metal-organic framework (MOF) nanoparticles based on the canonical ZIF-8 (Zn) system and its Cd analogue, which form with a core-shell structure whose internal interface can be systematically tuned. We use scanning transmission electron microscopy, X-ray energy dispersive spectroscopy and a new composition gradient model to fit high-resolution X-ray diffraction data to show how core-shell composition and interface characteristics are intricately controlled by synthesis temperature and reaction composition. Particle formation is investigated by in situ X-ray diffraction, which reveals that the spatial distribution of components evolves with time and is determined by the interplay of phase stability, crystallisation kinetics and diffusion. This work opens up new possibilities for the control and characterisation of functionality, component distribution and interfaces in MOF-based materials.

Exploring cation disorder in mixed-metal pyrochlore ceramics using 17 O NMR spectroscopy and first-principles calculations.

Characterising the local structures (e.g., the cation distribution) of mixed-metal ceramics by NMR spectroscopy is often challenging owing to the unfavourable properties (low γ, large quadrupole moment and/or low abundance) of many metal nuclei. 17 O is an attractive option owing to the prevalence of oxygen within ceramics. The moderate γ and small quadrupole moment of 17 O mean that the greatest barrier to accessing the information available from this nucleus is isotopic enrichment. We explore the challenges of ensuring uniform isotopic enrichment with 17 O2 (g) for the pyrochlore solid solutions, Y2 Snx Ti2-x O7 , La2 Snx Zr2-x O7 and La2 Snx Hf2-x O7 , demonstrating that high enrichment temperatures (900 °C for 12 hr) are required. In addition, for sites with very high symmetry (such as the tetrahedral OY4 and OLa4 sites with CQ ≈ 0 present here), we demonstrate that quantitative 17 O NMR spectra require correction for the differing contributions from the centreband of the satellite transitions, which can be as high as a factor of ~3.89. It is common to use first-principles calculations to aid in interpreting NMR spectra of disordered solids. Here, we use an ensemble modelling approach to ensure that all possible cation arrangements are modelled in the minimum possible number of calculations. By combining uniform isotopic enrichment, quantitative NMR spectroscopy and a comprehensive computational approach, we are able to show that the cation distribution in Y2 Snx Ti2-x O7 is essentially random, whereas in La2 Snx Zr2-x O7 and La2 Snx Hf2-x O7 , OLa2SnZr and OLa2SnHf sites are slightly energetically disfavoured, leading to a weak preference for clustering of like cations.

Application of NMR Crystallography to Highly Disordered Templated Materials: Extensive Local Structural Disorder in the Gallophosphate GaPO-34A.

We present an NMR crystallographic investigation of two as-made forms of the recently characterized gallophosphate GaPO-34A, which has an unusual framework composition with a Ga:P ratio of 7:6 and contains both hydroxide and fluoride anions and either 1-methylimidazolium or pyridinium as the structure-directing agent. We combine previously reported X-ray crystallographic data with solid-state NMR spectroscopy and periodic density functional theory (DFT) calculations to show that the structure contains at least three distinct types of disorder (occupational, compositional, and dynamic). The occupational disorder arises from the presence of six anion sites per unit cell, but a total occupancy of five of these, leading to full occupancy of four sites and partial occupancy of the fifth and sixth (which are related by symmetry). The mixture of OH and F present leads to compositional disorder on the occupied anion sites, although the occupancy of some sites by F is calculated to be energetically unfavorable and signals relating to F on these sites are not observed by NMR spectroscopy, confirming that the compositional disorder is not random. Finally, a combination of high-field 71Ga NMR spectroscopy and variable-temperature 13C and 31P NMR experiments shows that the structure directing agents are dynamic on the microsecond time scale, which can be supported by averaging the 31P chemical shifts calculated with the SDA in different orientations. This demonstrates the value of an NMR crystallographic approach, particularly in the case of highly disordered crystalline materials, where the growth of large single crystals for conventional structure determination may not be possible owing to the extent of disorder present.

Following the unusual breathing behaviour of 17O-enriched mixed-metal (Al,Ga)-MIL-53 using NMR crystallography.

The breathing behaviour of 17O-enriched (Al,Ga)-MIL-53, a terephthalate-based metal-organic framework, has been investigated using a combination of solid-state nuclear magnetic resonance (NMR) spectroscopy, powder X-ray diffraction (PXRD) and first-principles calculations. These reveal that the behaviour observed for as-made, calcined, hydrated and subsequently dehydrated mixed-metal MIL-53 materials differs with composition, but cannot be described as the compositionally weighted average of the breathing behaviour seen for the two end members. Although the form of MIL-53 adopted by the as-made material is independent of metal composition, upon calcination, materials with higher levels of Al adopt an open pore (OP) form, as found for the Al end member, but substitution of Ga results in mixed pore materials, with OP and narrow pore (NP) forms co-existing. Although the Ga end member is prone to decomposition under the calcination conditions used, a low level of Al in the starting synthesis (5%) leads to an OP mixed-metal MOF that is stable to calcination. Upon hydration, all materials almost exclusively adopt a closed pore (CP) structure, with strong hydrogen bonding interactions with water leading to two distinct resonances from the carboxylate oxygens in 17O NMR spectra. When dehydrated, different framework structures are found for the two end members, OP for Al-MIL-53 and NP for Ga-MIL-53, with the proportion of NP MOF seen to increase systematically with the Ga content in mixed-metal materials, in contrast to the forms seen upon initial calcination. 17O NMR spectra of mixed-metal MIL-53 materials show an increased preference for clustering of like cations as the Ga content increases. This is not a result of the small-scale dry gel conversion reactions used for enrichment, as a similar cation distribution and clustering is also observed for (Al0.5,Ga0.5)-MIL-53 synthesised hydrothermally and enriched with 17O via post-synthetic steaming.

Site-Specific Iron Substitution in STA-28, a Large Pore Aluminophosphate Zeotype Prepared by Using 1,10-Phenanthrolines as Framework-Bound Templates.

An AlPO4 zeotype has been prepared using the aromatic diamine 1,10-phenanthroline and some of its methylated analogues as templates. In each case the two template N atoms bind to a specific framework Al site to expand its coordination to the unusual octahedral AlO4 N2 environment. Furthermore, using this framework-bound template, Fe atoms can be included selectively at this site in the framework by direct synthesis, as confirmed by annular dark field scanning transmission electron microscopy and Rietveld refinement. Calcination removes the organic molecules to give large pore framework solids, with BET surface areas up to 540 m2 g-1 and two perpendicular sets of channels that intersect to give pore space connected by 12-ring openings along all crystallographic directions.

Synthesis of Chiral MOF-74 Frameworks by Post-Synthetic Modification by Using an Amino Acid.

The synthesis of chiral metal-organic frameworks (MOFs) is highly relevant for asymmetric heterogenous catalysis, yet very challenging. Chiral MOFs with MOF-74 topology were synthesised by using post-synthetic modification with proline. Vibrational circular dichroism studies demonstrate that proline is the source of chirality. The solvents used in the synthesis play a key role in tuning the loading of proline and its interaction with the MOF-74 framework. In N,N'-dimethylformamide, proline coordinates monodentate to the Zn2+ ions within the MOF-74 framework, whereas it is only weakly bound to the framework when using methanol as solvent. Introducing chirality within the MOF-74 framework also leads to the formation of defects, with both the organic linker and metal ions missing from the framework. The formation of defects combined with the coordination of DMF and proline within the framework leads to a pore blocking effect. This is confirmed by adsorption studies and testing of the chiral MOFs in the asymmetric aldol reaction between acetone and para-nitrobenzaldehyde.

Deoxyfluorination with CuF2 : Enabled by Using a Lewis Base Activating Group.

Deoxyfluorination is a primary method for the formation of C-F bonds. Bespoke reagents are commonly used because of issues associated with the low reactivity of metal fluorides. Reported here is the development of a simple strategy for deoxyfluorination, using first-row transition-metal fluorides, and it overcomes these limitations. Using CuF2 as an exemplar, activation of an O-alkylisourea adduct, formed in situ, allows effective nucleophilic fluoride transfer to a range of primary and secondary alcohols. Spectroscopic investigations have been used to probe the origin of the enhanced reactivity of CuF2 . The utility of the process in enabling 18 F-radiolabeling is also presented.

Synthesis and Polymorphism of Mixed Aluminum-Gallium Oxides.

The synthesis of a new solid solution of the oxyhydroxide Ga5-xAlxO7(OH) is investigated via solvothermal reaction between gallium acetylacetonate and aluminum isopropoxide in 1,4-butanediol at 240 °C. A limited compositional range of 0 ≤ x ≤ 1.5 is produced, with the hexagonal unit cell parameters refined from powder X-ray diffraction (XRD) showing a linear contraction in unit cell volume with an increase in Al content. Solid-state 27Al and 71Ga nuclear magnetic resonance (NMR) spectroscopies show a strong preference for Ga to occupy the tetrahedral sites and Al to occupy the octahedral sites. Using isopropanol as the solvent, γ-Ga2-xAlxO3 defect spinel solid solutions with x ≤ 1.8 can be prepared at 240 °C in 24 h. These materials are nanocrystalline, as evidenced by their broad diffraction profiles; however, the refined cubic lattice parameter shows a linear relationship with the Ga:Al content, and solid-state NMR spectroscopy again shows a preference for Al to occupy the octahedral sites. Thermal decomposition of Ga5-xAlxO7(OH) occurs via poorly ordered materials that resemble ε-Ga2-xAlxO3 and κ-Ga2-xAlxO3, but γ-Ga2-xAlxO3 transforms above 750 °C to monoclinic ß-Ga2-xAlxO3 for 0 ≤ x ≤ 1.3 and to hexagonal α-Ga2-xAlxO3 for x = 1.8, with intermediate compositions of 1.3 < x < 1.8 giving mixtures of the α- and ß-polymorphs. Solid-state NMR spectroscopy shows only the expected octahedral Al for α-Ga2-xAlxO3, and for ß-Ga2-xAlxO3, the ∼1:2 tetrahedral:octahedral Al ratio is in good agreement with the results of Rietveld analysis of the average structures against powder XRD data. Relative energies calculated by periodic density functional theory confirm that there is an ∼5.2 kJ mol-1 penalty for tetrahedral rather than octahedral Al in Ga5-xAlxO7(OH), whereas this penalty is much smaller (∼2.0 kJ mol-1) for ß-Ga2-xAlxO3, in good qualitative agreement with the experimental NMR spectra.

Continuous flow knitting of a triptycene hypercrosslinked polymer.

By replacing Lewis acids with Brønsted acids as catalysts, continuous flow synthesis of hypercrosslinked polymers is achieved within 10% of the time required for a typical batch reaction. Compared with batch-synthesised polymers, the flow-produced materials take up 24% more CO2, precluding the need for lengthy reaction protocols to yield high-performance hypercrosslinked polymers for carbon capture.

NMR chemical shifts of urea loaded copper benzoate. A joint solid-state NMR and DFT study.

We report solid-state 13C NMR spectra of urea-loaded copper benzoate, Cu2(C6H5CO2)4·2(urea), a simplified model for copper paddlewheel-based metal-organic frameworks (MOFs), along with first-principles density functional theory (DFT) computation of the paramagnetic NMR (pNMR) chemical shifts. Assuming a Boltzmann distribution between a diamagnetic open-shell singlet ground state (in a broken-symmetry Kohn-Sham DFT description) and an excited triplet state, the observed δ(13C) values are reproduced reasonably well at the PBE0-⅓/IGLO-II//PBE0-D3/AE1 level. Using the proposed assignments of the signals, the mean absolute deviation between computed and observed 13C chemical shifts is below 30 ppm over a range of more than 1100 ppm.

13C pNMR of "crumple zone" Cu(II) isophthalate metal-organic frameworks.

NMR spectroscopy of paramagnetic materials (pNMR) has the potential to provide great structural insight, but many challenges remain in interpreting the spectra in detail. This work presents a study of a series of structurally analogous metal-organic frameworks (MOFs) based on 5-substituted isophthalate linkers and Cu(II) paddlewheel dimers, of interest owing to their "crumple zone" structural rearrangement on dehydration/rehydration. 13C MAS NMR spectra reveal a wide variation in the observed resonance position for chemically similar C species in the different MOFs but, despite this, resonances are overlapped in several cases. However, by considering a combination of the integration of quantitative spectra, the resonance position as a function of temperature and T1 relaxation measurements, the spectra can be fully assigned. It is also demonstrated that the prototypical MOF in this series, STAM-1, displays a crumple zone rearrangement on dehydration, similar to the well-characterised 5-ethoxyisophthalate MOF (STAM-17-OEt) although, while the materials have similar local C environments, dehydrated STAM-1 exhibits less long-range order.

Sensitivity improvement in 5QMAS NMR experiments using FAM-N pulses.

The multiple-quantum magic-angle spinning (MQMAS) experiment is a popular choice for obtaining high-resolution solid-state NMR spectra of quadrupolar nuclei with half-integer spin quantum number. However, its inherently poor sensitivity limits its application in more challenging systems. In particular, the use of higher-order multiple-quantum coherences, which have the potential to provide higher resolution in the isotropic spectrum, results in a further decrease in sensitivity. Here we extend our recent work, which introduced an automated, high-throughput approach to generate amplitude-modulated composite pulses (termed FAM-N) to improve the efficiency of the conversion of three-quantum coherences, and explore the use of similar pulses in five-quantum MAS experiments. We consider three different approaches, and are able to demonstrate that all three provide good enhancements over single pulse conversion in all but the most extreme cases, and work well at a range of spinning rates. We show that FAM-N pulses are robust to variation in the quadrupolar coupling and rf nutation rate, demonstrating their applicability in multisite systems and systems where direct experimental optimisation of complex composite pulses is not feasible. This work will ease the implementation of higher-order MQMAS experiments and enable their application to materials and systems that were previously deemed too difficult to study.

A Picture of Disorder in Hydrous Wadsleyite-Under the Combined Microscope of Solid-State NMR Spectroscopy and Ab Initio Random Structure Searching.

The Earth's transition zone, at depths of 410-660 km, while being composed of nominally anhydrous magnesium silicate minerals, may be subject to significant hydration. Little is known about the mechanism of hydration, despite the vital role this plays in the physical and chemical properties of the mantle, leading to a need for improved structural characterization. Here we present an ab initio random structure searching (AIRSS) investigation of semihydrous (1.65 wt % H2O) and fully hydrous (3.3 wt % H2O) wadsleyite. Following the AIRSS process, k-means clustering was used to select sets of structures with duplicates removed, which were then subjected to further geometry optimization with tighter constraints prior to NMR calculations. Semihydrous models identify a ground-state structure (Mg3 vacancies, O1-H hydroxyls) that aligns with a number of previous experimental observations. However, predicted NMR parameters fail to reproduce low-intensity signals observed in solid-state NMR spectra. In contrast, the fully hydrous models produced by AIRSS, which enable both isolated and clustered defects, are able to explain observed NMR signals via just four low-enthalpy structures: (i) a ground state, with isolated Mg3 vacancies and O1-H hydroxyls; (ii/iii) edge-sharing Mg3 vacancies with O1-H and O3-H species; and (iv) edge-sharing Mg1 and Mg3 vacancies with O1-H, O3-H, and O4-H hydroxyls. Thus, the combination of advanced structure searching approaches and solid-state NMR spectroscopy is able to provide new and detailed insight into the structure of this important mantle mineral.

Is the 31 P chemical shift anisotropy of aluminophosphates a useful parameter for NMR crystallography?

The 31 P chemical shift anisotropy (CSA) offers a potential source of new information to help determine the structures of aluminophosphate (AlPO) framework materials. We investigate how to measure the CSAs, which are small (span of ~20-30 ppm) for AlPOs, demonstrating the need for CSA-amplification experiments (often in conjunction with 27 Al and/or 1 H decoupling) at high magnetic field (20.0 T) to obtain accurate values. We show that the most shielded component of the chemical shift tensor, δ33 , is related to the length of the shortest P─O bond, whereas the more deshielded components, δ11 and δ22 can be related more readily to the mean P─O bond lengths and P─O─Al angles. Using the case of Mg-doped STA-2 as an example, the CSA is shown to be much larger for P(OAl)4-n (OMg)n environments, primarily owing to a much shorter P─O(Mg) bond affecting δ33 , however, because the mean P─O bond lengths and P─O─T (T = Al, Mg) bond angles do not change significantly between P(OAl)4 and P(OAl)4-n (OMg)n sites, the isotropic chemical shifts for these species are similar, leading to overlapped spectral lines. When the CSA information is included, spectral assignment becomes unambiguous, therefore, although the specialist conditions required might preclude the routine measurement of 31 P CSAs in AlPOs, in some cases (particularly doped materials), the experiments can still provide valuable additional information for spectral assignment.