Meta-analysis towards FSHD reveals misregulation of neuromuscular junction, nuclear envelope, and spliceosome.

Facioscapulohumeral muscular dystrophy (FSHD) is one of the most common autosomal dominant muscle disorders, yet no cure or amelioration exists. The clinical presentation is diverse, making it difficult to identify the actual driving pathomechanism among many downstream events. To unravel this complexity, we performed a meta-analysis of 13 original omics datasets (in total 171 FSHD and 129 control samples). Our approach confirmed previous findings about the disease pathology and specified them further. We confirmed increased expression of former proposed DUX4 biomarkers, and furthermore impairment of the respiratory chain. Notably, the meta-analysis provides insights about so far not reported pathways, including misregulation of neuromuscular junction protein encoding genes, downregulation of the spliceosome, and extensive alterations of nuclear envelope protein expression. Finally, we developed a publicly available shiny app to provide a platform for researchers who want to search our analysis for genes of interest in the future.

Measurement of the reaction enthalpy of CO2 in aqueous solutions with thermographic and gravimetric methods.

In this work, a new concept for the approximate determination of the reaction enthalpy of the reaction between CO2 and monoethanolamine (MEA) in aqueous solution was developed. For this purpose, a CO2 gas stream was flowed into aqueous MEA solutions with different concentrations of 1 wt%, 2.5 wt% and 7.5 wt%. The weight difference ∆T, which is based on the increase in CO2 bound by the MEA over time, was documented using a thermographic camera. The mass difference ∆m, which is also based on the increase in CO2 bound by the MEA over time, was determined using a balance. By determining ∆T and ∆m, an approximate calculation of the reaction enthalpy is possible. The deviation from the values from the data known from the literature was less than 5% in all experiments.

Rapid Phenotypic Antibiotics Susceptibility Analysis by a 3D Printed Prototype.

One of the most important public health concerns is the increase in antibiotic-resistant pathogens and corresponding treatment of associated infections. Addressing this challenge requires more efficient use of antibiotics, achievable by the use of evidence-based, effective antibiotics identified by antibiotic susceptibility testing (AST). However, the current standard method of phenotypic AST used for this purpose requires 48 h or more from sample collection to result. Until results are available, broad-spectrum antibiotics are used to avoid delaying treatment. The turnaround time must therefore be shortened in order for the results to be available before the second administration of antibiotics. The phenotypic electrochemical AST method presented here identifies effective antibiotics within 5-10 h after sampling. Spiked serum samples, including polymicrobial samples, with clinically relevant pathogens and respective concentrations commonly found in bloodstream infections (Escherichia coli, Staphylococcus aureus, Klebsiella pneumoniae, and Pseudomonas aeruginosa) are used. Direct loading of the test with diluted serum eliminates the need for a pre-culture, as required by existing methods. Furthermore, by combining several electrochemical measurement procedures with computational analysis, allowing the method to be used both online and offline, the AST achieves a sensitivity of 94.44% and a specificity of 95.83% considering each replicate individually.

Ready-to-use nanopore platform for label-free small molecule quantification: Ethanolamine as first example.

In recent decades, nanopores have become a promising diagnostic tool. Protein and solid-state nanopores are increasingly used for both RNA/DNA sequencing and small molecule detection. The latter is of great importance, as their detection is difficult or expensive using available methods such as HPLC or LC-MS. DNA aptamers are an excellent detection element for sensitive and specific detection of small molecules. Herein, a method for quantifying small molecules using a ready-to-use sequencing platform is described. Taking ethanolamine as an example, a strand displacement assay is developed in which the target-binding aptamer is displaced from the surface of magnetic particles by ethanolamine. Non-displaced aptamer and thus the ethanolamine concentration are detected by the nanopore system and can be quantified in the micromolar range using our in-house developed analysis software. This method is thus the first to describe a label-free approach for the detection of small molecules in a protein nanopore system.

Highly efficient ß-lactamase assay applying poly-dimethylacrylamide-based surface functionalization with ß-lactam antibiotics and ß-lactamase inhibitors.

In recent decades, the rise of ß-lactamases has substantially led to the emergence and wide spread of antibiotic resistance posing a serious global health threat. There is growing need for the development of rapid, cost-effective and user-friendly diagnostic assays for the accurate detection of ß-lactamases to optimize patient outcomes and prevent the spread of multidrug-resistances. In this article, we present a poly-dimethylacrylamide (PDMA)-based surface functionalization to immobilize ß-lactam antibiotics and ß-lactamase inhibitors of different subclasses. Immobilization was induced via UV-crosslinking through C,H-insertion reactions. The functional coatings were successfully applied in a highly efficient assay for the determination of recombinant ß-lactamases as well as ß-lactamases isolated from clinically relevant bacterial strains. Thus, this method describes an innovative approach with several significant benefits for diagnostic applications: the creation of specific detection platforms tailored for ß-lactamase activity, the development of high-throughput diagnostic assays and benefits regarding stability and shelf-life. Furthermore, this method is highly adaptable to other surfaces, antibiotics, and analytes, offering far-reaching implications for various biomedical, environmental, and antimicrobial applications.

3D Bioprinting tissue analogs: Current development and translational implications.

Three-dimensional (3D) bioprinting is a promising and rapidly evolving technology in the field of additive manufacturing. It enables the fabrication of living cellular constructs with complex architectures that are suitable for various biomedical applications, such as tissue engineering, disease modeling, drug screening, and precision regenerative medicine. The ultimate goal of bioprinting is to produce stable, anatomically-shaped, human-scale functional organs or tissue substitutes that can be implanted. Although various bioprinting techniques have emerged to develop customized tissue-engineering substitutes over the past decade, several challenges remain in fabricating volumetric tissue constructs with complex shapes and sizes and translating the printed products into clinical practice. Thus, it is crucial to develop a successful strategy for translating research outputs into clinical practice to address the current organ and tissue crises and improve patients' quality of life. This review article discusses the challenges of the existing bioprinting processes in preparing clinically relevant tissue substitutes. It further reviews various strategies and technical feasibility to overcome the challenges that limit the fabrication of volumetric biological constructs and their translational implications. Additionally, the article highlights exciting technological advances in the 3D bioprinting of anatomically shaped tissue substitutes and suggests future research and development directions. This review aims to provide readers with insight into the state-of-the-art 3D bioprinting techniques as powerful tools in engineering functional tissues and organs.

Impact of nanotechnology on conventional and artificial intelligence-based biosensing strategies for the detection of viruses.

Recent years have witnessed the emergence of several viruses and other pathogens. Some of these infectious diseases have spread globally, resulting in pandemics. Although biosensors of various types have been utilized for virus detection, their limited sensitivity remains an issue. Therefore, the development of better diagnostic tools that facilitate the more efficient detection of viruses and other pathogens has become important. Nanotechnology has been recognized as a powerful tool for the detection of viruses, and it is expected to change the landscape of virus detection and analysis. Recently, nanomaterials have gained enormous attention for their value in improving biosensor performance owing to their high surface-to-volume ratio and quantum size effects. This article reviews the impact of nanotechnology on the design, development, and performance of sensors for the detection of viruses. Special attention has been paid to nanoscale materials, various types of nanobiosensors, the internet of medical things, and artificial intelligence-based viral diagnostic techniques.

Synthesis and bioassay of 3-Aryl -1-(pyridin-4-yl)benzo[4,5]imidazo[1,2-d][1,2,4]- triazin-4(3H)-ones as anti-cancer agents.

Four novel 3-Aryl -1-(pyridin-4-yl)benzo[4,5]imidazo[1,2-d][1,2,4]- triazin-4(3H)-ones derivatives (C1 to C4) have been designed, synthesized, and evaluated for their anticancer activity. The structure of compounds was characterized by IR,1H NMR, 13C NMR and high-resolution mass (HRMS). The crystal structures of C1, C2 and C4 were previously determined by single-crystal X-ray analysis.The results from docking experiments with EGFR suggested the binding of the compounds at the active site of EGFR. The new compounds exhibited different levels of cytotoxicity against HCC1937 and MCF7 breast cancer cells. Results of the MTT assay identified C3 as the most cytotoxic of the series against both MCF7 and HCC1937 breast cancer cell lines with IC50 values of 36.4 and 48.2 µM, respectively. In addition to its ability to inhibit cell growth and colony formation ability, C3 also inhibited breast cancer cell migration. Western blotting results showed that C3 treatment inhibited EGFR signaling and induced cell cycle arrest and apoptosis as indicated by the low level of p-EGFR and p-AKT and the increasing levels of p53, p21 and cleaved PARP. Our work represents a promising starting point for the development of a new series of compounds targeting cancer cells.

Converting bile acids into mitocans.

Cholic acid (1, CD), deoxycholic (3, DCA), chenodeoxycholic acid (5, CDCA), ursodeoxycholic acid (7, UDCA), and lithocholic acid (9, LCA) were acetylated and converted into their piperazinyl spacered rhodamine B conjugates 16-20. While the parent bile acids showed almost no cytotoxic effects for several human tumor cell lines, the piperazinyl amides were cytostatic but an even superior effect was observed for the rhodamine B conjugates. Extra staining experiments showed these compounds as mitocans; they led to a cell arrest in the G1 phase.

Direct 3D printed biocompatible microfluidics: assessment of human mesenchymal stem cell differentiation and cytotoxic drug screening in a dynamic culture system.

BACKGROUND: In vivo-mimicking conditions are critical in in vitro cell analysis to obtain clinically relevant results. The required conditions, comparable to those prevalent in nature, can be provided by microfluidic dynamic cell cultures. Microfluidics can be used to fabricate and test the functionality and biocompatibility of newly developed nanosystems or to apply micro- and nanoelectromechanical systems embedded in a microfluidic system. However, the use of microfluidic systems is often hampered by their accessibility, acquisition cost, or customization, especially for scientists whose primary research focus is not microfluidics. RESULTS: Here we present a method for 3D printing that can be applied without special prior knowledge and sophisticated equipment to produce various ready-to-use microfluidic components with a size of 100 µm. Compared to other available methods, 3D printing using fused deposition modeling (FDM) offers several advantages, such as time-reduction and avoidance of sophisticated equipment (e.g., photolithography), as well as excellent biocompatibility and avoidance of toxic, leaching chemicals or post-processing (e.g., stereolithography). We further demonstrate the ease of use of the method for two relevant applications: a cytotoxicity screening system and an osteoblastic differentiation assay. To our knowledge, this is the first time an application including treatment, long-term cell culture and analysis on one chip has been demonstrated in a directly 3D-printed microfluidic chip. CONCLUSION: The direct 3D printing method is tested and validated for various microfluidic components that can be combined on a chip depending on the specific requirements of the experiment. The ease of use and production opens up the potential of microfluidics to a wide range of users, especially in biomedical research. Our demonstration of its use as a cytotoxicity screening system and as an assay for osteoblastic differentiation shows the methods potential in the development of novel biomedical applications. With the presented method, we aim to disseminate microfluidics as a standard method in biomedical research, thus improving the reproducibility and transferability of results to clinical applications.

Synergy of R-(-)carvone and cyclohexenone-based carbasugar precursors with antibiotics to enhance antibiotic potency and inhibit biofilm formation.

The widespread use of antibiotics in recent decades has been a major factor in the emergence of antibiotic resistances. Antibiotic-resistant pathogens pose increasing challenges to healthcare systems in both developing and developed countries. To counteract this, the development of new antibiotics or adjuvants to combat existing resistance to antibiotics is crucial. Glycomimetics, for example carbasugars, offer high potential as adjuvants, as they can inhibit metabolic pathways or biofilm formation due to their similarity to natural substrates. Here, we demonstrate the synthesis of carbasugar precursors (CSPs) and their application as biofilm inhibitors for E. coli and MRSA, as well as their synergistic effect in combination with antibiotics to circumvent biofilm-induced antibiotic resistances. This results in a biofilm reduction of up to 70% for the CSP rac-7 and a reduction in bacterial viability of MRSA by approximately 45% when combined with the otherwise ineffective antibiotic mixture of penicillin and streptomycin.

A Fluorescence-Based Competitive Antibody Binding Assay for Kynurenine, a Potential Biomarker of Kidney Transplant Failure.

Kynurenine is a tryptophan metabolite linked to several inflammatory processes including transplant failure, a significant challenge in transplant medicine. The detection of small molecules such as kynurenine, however, is often complex and time consuming. Herein, we report the successful synthesis of a fluorescently labelled kynurenine derivative, showing proper fluorescence and anti-kynurenine antibody binding behavior in a magnetic bead immunoassay (MIA). The fluorescent kynurenine-rhodamine B conjugate shows a KD-value of 5.9 µM as well as IC50 values of 4.0 µM in PBS and 10.2 µM in saliva. We thus introduce a rapid test for kynurenine as a potential biomarker for kidney transplant failure.

Synthesis and cytotoxicity of betulin and betulinic acid derived 30-oxo-amides.

Betulin and betulinic acid derived 30-oxo-amides were prepared by hydroboration, subsequent oxidation and amidation; these novel compounds were screened for their cytotoxic activity by SRB assays. All of the compounds showed significant cytotoxic activity for different human tumor cell lines. Small changes in the structure, however, resulted in significant changes in the cytotoxicity of the compounds. Of special interest were compounds 11 and 12, each holding an extra ethylenediamine moiety. These C-30 amides which showed low EC50 values, and both of them acted mainly by apoptosis.

Open-Source, Adaptable, All-in-One Smartphone-Based System for Quantitative Analysis of Point-of-Care Diagnostics.

Point-of-care (POC) diagnostics, in particular lateral flow assays (LFA), represent a great opportunity for rapid, precise, low-cost and accessible diagnosis of disease. Especially with the ongoing coronavirus disease 2019 (COVID-19) pandemic, rapid point-of-care tests are becoming everyday tools for identification and prevention. Using smartphones as biosensors can enhance POC devices as portable, low-cost platforms for healthcare and medicine, food and environmental monitoring, improving diagnosis and documentation in remote, low-resource locations. We present an open-source, all-in-one smartphone-based system for quantitative analysis of LFAs. It consists of a 3D-printed photo box, a smartphone for image acquisition, and an R Shiny software package with modular, customizable analysis workflow for image editing, analysis, data extraction, calibration and quantification of the assays. This system is less expensive than commonly used hardware and software, so it could prove very beneficial for diagnostic testing in the context of pandemics, as well as in low-resource countries.

Current Synthetic Approaches to the Synthesis of Carbasugars from Non-Carbohydrate Sources.

Carbasugars are a group of carbohydrate derivatives in which the ring oxygen is replaced by a methylene group, producing a molecule with a nearly identical structure but highly different behavior. Over time, this definition has been extended to include other unsaturated cyclohexenols and carba-, di-, and polysaccharides. Such molecules can be found in bacterial strains and the human body, acting as neurotransmitters (e.g., inositol trisphosphate). In science, there are a wide range of research areas that are affected by, and involve, carbasugars, such as studies on enzyme inhibition, lectin-binding, and even HIV and cancer treatment. In this review article, different methods for synthesizing carbasugars, their derivatives, and similar cyclohexanes presenting comparable characteristics are summarized and evaluated, utilizing diverse starting materials and synthetic procedures.

Drug triggered pruritus, rash, papules, and blisters - is AGEP a clash of an altered sphingolipid-metabolism and lysosomotropism of drugs accumulating in the skin?

Rash, photosensitivity, erythema multiforme, and the acute generalized exanthematous pustulosis (AGEP) are relatively uncommon adverse reactions of drugs. To date, the etiology is not well understood and individual susceptibility still remains unknown. Amiodarone, chlorpromazine, amitriptyline, and trimipramine are classified lysosomotropic as well as photosensitizing, however, they fail to trigger rash and pruritic papules in all individuals. Lysosomotropism is a common charcteristic of various drugs, but independent of individuals. There is evidence that the individual ability to respond to external oxidative stress is crosslinked with the elongation of long-chain fatty acids to very long-chain fatty acids by ELOVLs. ELOVL6 and ELOVL7 are sensitive to ROS induced depletion of cellular NADPH and insufficient regeneration via the pentose phosphate pathway and mitochondrial fatty acid oxidation. Deficiency of NADPH in presence of lysosomotropic drugs promotes the synthesis of C16-ceramide in lysosomes and may contribute to emerging pruritic papules of AGEP. However, independently from a lysosomomotropic drug, severe depletion of ATP and NAD(P)H, e.g., by UV radiation or a potent photosensitizer can trigger likewise the collapse of the lysosomal transmembrane proton gradient resulting in lysosomal C16-ceramide synthesis and pruritic papules. This kind of papules are equally present in polymorphous light eruption (PMLE/PLE) and acne aestivalis (Mallorca acne). The suggested model of a compartmentalized ceramide metabolism provides a more sophisticated explanation of cutaneous drug adverse effects and the individual sensitivity to UV radiation. Parameters such as pKa and ClogP of the triggering drug, cutaneous fatty acid profile, and ceramide profile enables new concepts in risk assessment and scoring of AGEP as well as prophylaxis outcome.

Methacryloyl-GlcNAc Derivatives Copolymerized with Dimethacrylamide as a Novel Antibacterial and Biocompatible Coating.

Improving medical implants with functional polymer coatings is an effective way to further improve the level of medical care. Antibacterial and biofilm-preventing properties are particularly desirable in the area of wound healing, since there is a generally high risk of infection, often with a chronic course in the case of biofilm formation. To prevent this we here report a polymeric design of polymer-bound N-acetyl-glucosamine-oligoethylene glycol residues that mimic a cationic, antibacterial, and biocompatible chitosan surface. The combination of easy to use, crosslinkable, thin, potentially 3D-printable polymethacrylate layering with antibacterial and biocompatible functional components will be particularly advantageous in the medical field to support a wide range of implants as well as wound dressings. Different polymers containing a N-acetylglucosamine-methacryloyl residue with oligoethylene glycol linkers and a methacryloyl benzophenone crosslinker were synthesized by free radical polymerization. The functional monomers and corresponding polymers were characterized by 1H, 13C NMR, and infrared (IR) spectroscopy. The polymers showed no cytotoxic or antiadhesive effects on fibroblasts as demonstrated by extract and direct contact cell culture methods. Biofilm formation was reduced by up to 70% and antibacterial growth by 1.2 log, particularly for the 5% GlcNAc-4EG polymer, as observed for Escherichia coli and Staphylococcus aureus as clinically relevant Gram-negative and Gram-positive model pathogens.

Biosynthesis of iron oxide magnetic nanoparticles using clinically isolated Pseudomonas aeruginosa.

Magnetotactic bacteria are microscale complex natural systems that synthesize magnetic nanoparticles through biologically controlled mineralization. Nanoparticles produced by this process are biocompatible due to the presence of surrounding membranes. The mechanism controlling synthesis is cost-effective and is executed by complex genomes (operons). The results are monodispersed magnetic nanoparticles displaying advantages over polydispersed ones synthesized by physical and chemical methods. In this work, we isolated Pseudomonas aeruginosa from clinical samples and demonstrated its ability to biosynthesize magnetic nanoparticles. P. aeruginosa was thrived in a carbon-minimal medium supplemented with iron at low pH. The cells aligned parallel to a magnetic field, confirming their magnetic properties. The magnetic nanoparticles were extracted, purified, and characterized using electron microscopy, magnetometry, dynamic light scattering, and X-ray diffraction. This work represents the first isolation of a magnetotactic bacterium from clinical samples. The aerobic nature of these bacteria allows them to be easily cultured under laboratory conditions, unlike their well-known microaerophilic counterparts. The biosynthesized magnetic nanoparticles can be used in many applications, including magnetic resonance imaging, diagnostics, and therapeutics (i.e., magnetic hyperthermia).

Lineage-Selective Disturbance of Early Human Hematopoietic Progenitor Cell Differentiation by the Commonly Used Plasticizer Di-2-ethylhexyl Phthalate via Reactive Oxygen Species: Fatty Acid Oxidation Makes the Difference.

Exposure to ubiquitous endocrine-disrupting chemicals (EDCs) is a major public health concern. We analyzed the physiological impact of the EDC, di-2-ethylhexyl phthalate (DEHP), and found that its metabolite, mono-2-ethylhexyl phthalate (MEHP), had significant adverse effects on myeloid hematopoiesis at environmentally relevant concentrations. An analysis of the underlying mechanism revealed that MEHP promotes increases in reactive oxygen species (ROS) by reducing the activity of superoxide dismutase in all lineages, possibly via its actions at the aryl hydrocarbon receptor. This leads to a metabolic shift away from glycolysis toward the pentose phosphate pathway and ultimately results in the death of hematopoietic cells that rely on glycolysis for energy production. By contrast, cells that utilize fatty acid oxidation for energy production are not susceptible to this outcome due to their capacity to uncouple ATP production. These responses were also detected in non-hematopoietic cells exposed to alternate inducers of ROS.