Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 20 de 63
Filtrar
Mais filtros








Base de dados
Intervalo de ano de publicação
1.
ACS Appl Mater Interfaces ; 16(15): 19866-19876, 2024 Apr 17.
Artigo em Inglês | MEDLINE | ID: mdl-38587105

RESUMO

The concept of multiphysics, where materials respond to diverse external stimuli, such as magnetic fields, electric fields, light irradiation, stress, heat, and chemical reactions, plays a fundamental role in the development of innovative devices. Nanomanufacturing, especially in low-dimensional systems, enhances the synergistic interactions taking place on the nanoscale. Light-matter interaction, rather than electric fields, holds great promise for achieving low-power, wireless control over magnetism, solving two major technological problems: the feasibility of electrical contacts at smaller scales and the undesired heating of the devices. Here, we shed light on the remarkable reversible modulation of magnetism using visible light in epitaxial Fe3O4/BaTiO3 heterostructure. This achievement is underpinned by the convergence of two distinct mechanisms. First, the magnetoelastic effect, triggered by ferroelectric domain switching, induces a proportional change in coercivity and remanence upon laser illumination. Second, light-matter interaction induces charged ferroelectric domain walls' electrostatic decompensations, acting intimately on the magnetization of the epitaxial Fe3O4 film by magnetoelectric coupling. Crucially, our experimental results vividly illustrate the capability to manipulate magnetic properties using visible light. This concomitant mechanism provides a promising avenue for low-intensity visible-light manipulation of magnetism, offering potential applications in multiferroic devices.

2.
Nanoscale ; 16(9): 4900-4908, 2024 Feb 29.
Artigo em Inglês | MEDLINE | ID: mdl-38323494

RESUMO

Optical means instead of electric fields may offer a new pathway for low-power and wireless control of magnetism, holding great potential to design next-generation memory and spintronic devices. Artificial multiferroic materials have shown remarkable suitability as platforms towards the optical control of magnetic properties. However, the practical use of magnetic modulation should be both stable and reversible and, particularly, it should occur at room temperature. Here we show an unprecedented reversible modulation of magnetism using low-intensity visible-light in Fe75Al25/BaTiO3 heterostructures, at room temperature. This is enabled by the existence of highly oriented charged domain walls arranged in arrays of alternating in-plane and out-of-plane ferroelectric domains with stripe morphology. Light actuation yields a net anisotropic stress caused by ferroelectric domain switching, which leads to a 90-degree reorientation of the magnetic easy axis. Significant changes in the coercivity and squareness ratio of the hysteresis loops can be light-modulated, encouraging the development of novel low energy-consumption wireless magneto-optical devices.

3.
Phys Rev Lett ; 131(23): 230401, 2023 Dec 08.
Artigo em Inglês | MEDLINE | ID: mdl-38134787

RESUMO

The Kibble-Zurek mechanism (KZM) predicts that the average number of topological defects generated upon crossing a continuous or quantum phase transition obeys a universal scaling law with the quench time. Fluctuations in the defect number near equilibrium are approximately of Gaussian form, in agreement with the central limit theorem. Using large deviations theory, we characterize the universality of fluctuations beyond the KZM and report the exact form of the rate function in the transverse-field quantum Ising model. In addition, we characterize the scaling of large deviations in an arbitrary continuous phase transition, building on recent evidence establishing the universality of the defect number distribution.

4.
Phys Rev Lett ; 131(16): 160202, 2023 Oct 20.
Artigo em Inglês | MEDLINE | ID: mdl-37925720

RESUMO

Noise is ubiquitous in nature, so it is essential to characterize its effects. Considering a fluctuating Hamiltonian, we introduce an observable, the stochastic operator variance (SOV), which measures the spread of different stochastic trajectories in the space of operators. The SOV obeys an uncertainty relation and allows us to find the initial state that minimizes the spread of these trajectories. We show that the dynamics of the SOV is intimately linked to that of out-of-time-order correlators, which define the quantum Lyapunov exponent λ. Our findings are illustrated analytically and numerically in a stochastic Lipkin-Meshkov-Glick Hamiltonian undergoing energy dephasing.

5.
Phys Rev Lett ; 130(6): 060402, 2023 Feb 10.
Artigo em Inglês | MEDLINE | ID: mdl-36827553

RESUMO

The crossing of a continuous phase transition gives rise to the formation of topological defects described by the Kibble-Zurek mechanism (KZM) in the limit of slow quenches. The KZM predicts a universal power-law scaling of the defect density as a function of the quench time. We focus on the deviations from KZM experimentally observed in rapid quenches and establish their universality. While KZM scaling holds below a critical quench rate, for faster quenches the defect density and the freeze-out time become independent of the quench rate and exhibit a universal power-law scaling with the final value of the control parameter. These predictions are verified in several paradigmatic scenarios in both the classical and quantum domains.

6.
ACS Appl Mater Interfaces ; 15(2): 3507-3521, 2023 Jan 18.
Artigo em Inglês | MEDLINE | ID: mdl-36606586

RESUMO

Defective few-layered graphene mesostructures (DFLGMs) are produced from graphite flakes by high-energy milling processes. We obtain an accurate control of the generated mesostructures, as well as of the amount and classification of the structural defects formed, providing a functional material for microwave absorption purposes. Working under far-field conditions, competitive values of minimum reflection loss coefficient (RLmin) = -21.76 dB and EAB = 4.77 dB are achieved when DFLGMs are immersed in paints at a low volume fraction (1.95%). One step forward is developed by combining them with the excellent absorption behavior that offers amorphous Fe73.5Si13.5B9Cu1Nb microwires (MWs), varying their filling contents, which are below 3%. We obtain a RLmin improvement of 47% (-53.08 dB) and an EAB enhancement of 137% (4 dB) compared to those obtained by MW-based paints. Furthermore, a fmin tunability is demonstrated, maintaining similar RLmin and EAB values, irrespective of an ideal matching thickness. In this scenario, the Maxwell-Garnet standard model is valid, and dielectric losses mainly come from multiple reflections, interfacial and dielectric polarizations, which greatly boost the microwave attenuation of MWs. The present concept can remarkably enhance not only the MW attenuation but can also apply to other microwave absorption architectures of technological interest by adding low quantities of DFLGMs.

7.
Phys Rev Lett ; 129(15): 150601, 2022 Oct 07.
Artigo em Inglês | MEDLINE | ID: mdl-36269951

RESUMO

Exchange operator formalism describes many-body integrable systems using phase-space variables involving an exchange operator that acts on any pair of particles. We establish an equivalence between models described by exchange operator formalism and the complete infinite family of parent Hamiltonians describing quantum many-body models with ground states of Jastrow form. This makes it possible to identify the invariants of motion for any model in the family and establish its integrability, even in the presence of an external potential. Using this construction we establish the integrability of the long-range Lieb-Liniger model, describing bosons in a harmonic trap and subject to contact and Coulomb interactions in one dimension. We further identify a variety of models exemplifying the integrability of Hamiltonians in this family.

8.
J Phys Chem C Nanomater Interfaces ; 126(32): 13755-13761, 2022 Aug 18.
Artigo em Inglês | MEDLINE | ID: mdl-36017359

RESUMO

We have monitored the Verwey transition in micrometer-wide, nanometer-thick magnetite islands on epitaxial Ru films on Al2O3(0001) using Raman spectroscopy. The islands have been grown by high-temperature oxygen-assisted molecular beam epitaxy. Below 100 K and for thicknesses above 20 nm, the Raman spectra correspond to those observed in bulk crystals and high-quality thin films for the sub-Verwey magnetite structure. At room temperature, the width of the cubic phase modes is similar to the best reported for bulk crystals, indicating a similar strength of electron-phonon interaction. The evolution of the Raman spectra upon cooling suggests that for islands thicker than 20 nm, structural changes appear first at temperatures starting at 150 K while the Verwey transition itself takes place at around 115 K. However, islands thinner than 20 nm show very different Raman spectra, indicating that while a transition takes place, the charge order of the ultrathin islands differs markedly from their thicker counterparts.

9.
Soft Matter ; 18(32): 6105-6114, 2022 Aug 17.
Artigo em Inglês | MEDLINE | ID: mdl-35943033

RESUMO

We report on the preparation of micropatterned functional surfaces produced by inducing an out-of-plane deformation on elastic substrates and fixing these by creating a rigid oxidized top layer. Specifically, the elastic substrate used was Polydimethylsiloxane (PDMS) and the rigid layer on top was created by ozonation of this material. We evidenced that the surface pattern formed is directly dependent on the pressure applied, the mechanical properties of the elastic substrate and on the dimensions and shape of the mask employed to define the exposed and non-exposed areas. In addition to the pattern formed, another interesting aspect is related to the ozone diffusion within the material. Softer PDMS enables more efficient diffusion and produced a thicker oxidized layer in comparison to rigid PDMS. Finally, a simulation was carried out using the distribution of Von Misses stresses of a solid plate to understand the conditions in which the applied force resulted in the rupture of the rigid oxidized layer under a permanent deformation.

10.
Inorg Chem ; 61(30): 11886-11896, 2022 Aug 01.
Artigo em Inglês | MEDLINE | ID: mdl-35857923

RESUMO

Deep-UV (180-280 nm) phosphors have attracted tremendous interest in tri-band-based white light-emitting diode (LED) technology, bio- and photochemistry, as well as various medical fields. However, the application of many UV-emitting materials has been hindered due to their poor thermal or chemical stability, complex synthesis, and environmental harmfulness. A particular concern is posed by the utilization of rare earths affected by rising price and depletion of natural resources. As a consequence, the development of phosphors without rare-earth elements represents an important challenge. In this work, as a potential UV-C phosphor, undoped ZnAl2O4 fibers have been synthesized by a cost-efficient wet chemical route. The rare-earth-free ZnAl2O4 nanofibers exhibit a strong UV emission with two bands peaking at 5.4 eV (230 nm) and 4.75 eV (261 nm). The emission intensity can be controlled by tuning the Zn/Al ratio. A structure-property relationship has been thoroughly studied to understand the origin of the UV emission. For this reason, ZnAl2O4 nanofibers have been analyzed by X-ray absorption near-edge structure (XANES), extended X-ray absorption fine structure (EXAFS), X-ray diffraction (XRD), and Raman spectroscopy techniques showing that a normal spinel structure of the synthesized material is preserved within a wide range of Zn/Al ratios. The experimental evidence of a strong and narrow band at 7.04 eV in the excitation spectrum of the 5.4 eV emission suggests its excitonic nature. Moreover, the 4.75 eV emission is shown to be related to excitons perturbed by lattice defects, presumably oxygen or cation vacancies. These findings shed light on the design of UV-C emission devices for sterilization based on a rare-earth-free phosphor, providing a feasible alternative to the conventional phosphors doped with rare-earth elements.

11.
Phys Rev Lett ; 128(19): 190402, 2022 May 13.
Artigo em Inglês | MEDLINE | ID: mdl-35622025

RESUMO

The dynamical signatures of quantum chaos in an isolated system are captured by the spectral form factor, which exhibits as a function of time a dip, a ramp, and a plateau, with the ramp being governed by the correlations in the level spacing distribution. While decoherence generally suppresses these dynamical signatures, the nonlinear non-Hermitian evolution with balanced gain and loss (BGL) in an energy-dephasing scenario can enhance manifestations of quantum chaos. In the Sachdev-Ye-Kitaev model and random matrix Hamiltonians, BGL increases the span of the ramp, lowering the dip as well as the value of the plateau, providing an experimentally realizable physical mechanism for spectral filtering. The chaos enhancement due to BGL is optimal over a family of filter functions that can be engineered with fluctuating Hamiltonians.

12.
Phys Rev Lett ; 128(16): 160505, 2022 Apr 22.
Artigo em Inglês | MEDLINE | ID: mdl-35522510

RESUMO

We develop a variational principle to determine the quantum controls and initial state that optimizes the quantum Fisher information, the quantity characterizing the precision in quantum metrology. When the set of available controls is limited, the exact optimal initial state and the optimal controls are, in general, dependent on the probe time, a feature missing in the unrestricted case. Yet, for time-independent Hamiltonians with restricted controls, the problem can be approximately reduced to the unconstrained case via Floquet engineering. In particular, we find for magnetometry with a time-independent spin chain containing three-body interactions, even when the controls are restricted to one- and two-body interaction, that the Heisenberg scaling can still be approximately achieved. Our results open the door to investigate quantum metrology under a limited set of available controls, of relevance to many-body quantum metrology in realistic scenarios.

13.
Entropy (Basel) ; 23(11)2021 Nov 17.
Artigo em Inglês | MEDLINE | ID: mdl-34828225

RESUMO

We formulate limits to perception under continuous quantum measurements by comparing the quantum states assigned by agents that have partial access to measurement outcomes. To this end, we provide bounds on the trace distance and the relative entropy between the assigned state and the actual state of the system. These bounds are expressed solely in terms of the purity and von Neumann entropy of the state assigned by the agent, and are shown to characterize how an agent's perception of the system is altered by access to additional information. We apply our results to Gaussian states and to the dynamics of a system embedded in an environment illustrated on a quantum Ising chain.

14.
Phys Rev Lett ; 127(2): 028902, 2021 Jul 09.
Artigo em Inglês | MEDLINE | ID: mdl-34296920

RESUMO

We acknowledge that a derivation reported in Phys. Rev. Lett. 125, 040601 (2020)PRLTAO0031-900710.1103/PhysRevLett.125.040601 is incorrect as pointed out by Cusumano and Rudnicki. We respond by giving a correct proof of the claim "fluctuations in the free energy operator upper bound the charging power of a quantum battery" that we made in the Letter.

15.
Phys Rev Lett ; 126(18): 180603, 2021 May 07.
Artigo em Inglês | MEDLINE | ID: mdl-34018797

RESUMO

Quantum speed limits (QSLs) rule the minimum time for a quantum state to evolve into a distinguishable state in an arbitrary physical process. These fundamental results constrain a notion of distance traveled by the quantum state, known as the Bures angle, in terms of the speed of evolution set by nonadiabatic energy fluctuations. I theoretically propose how to measure QSLs in an ultracold quantum gas confined in a time-dependent harmonic trap. In this highly-dimensional system of continuous variables, quantum tomography is prohibited. Yet, QSLs can be probed whenever the dynamics is self-similar by measuring as a function of time the cloud size of the ultracold gas. This makes it possible to determine the Bures angle and energy fluctuations, as I discuss for various ultracold atomic systems.

16.
ACS Appl Mater Interfaces ; 13(17): 20858-20864, 2021 May 05.
Artigo em Inglês | MEDLINE | ID: mdl-33881295

RESUMO

The use of photonic concepts to achieve nanoactuation based on light triggering requires complex architectures to obtain the desired effect. In this context, the recent discovery of reversible optical control of the domain configuration in ferroelectrics offers a light-ferroic interplay that can be easily controlled. To date, however, the optical control of ferroelectric domains has been explored in single crystals, although polycrystals are technologically more desirable because they can be manufactured in a scalable and reproducible fashion. Here we report experimental evidence for a large photostrain response in polycrystalline BaTiO3 that is comparable to their electrostrain values. Domains engineering is performed through grain size control, thereby evidencing that charged domain walls appear to be the functional interfaces for the light-driven domain switching. The findings shed light on the design of high-performance photoactuators based on ferroelectric ceramics, providing a feasible alternative to conventional voltage-driven nanoactuators.

17.
Nanotechnology ; 32(24)2021 Mar 23.
Artigo em Inglês | MEDLINE | ID: mdl-33508809

RESUMO

The interaction of graphene with metal oxides is essential for understanding and controlling new devices' fabrication based on these materials. The growth of metal oxides on graphene/substrate systems constitutes a challenging task due to the graphene surface's hydrophobic nature. In general, different pre-treatments should be performed before deposition to ensure a homogenous growth depending on the deposition technique, the metal oxide, and the surface's specific nature. Among these factors, the initial state and interaction of graphene with its substrate is the most important. Therefore, it is imperative to study the initial local state of graphene and relate it to the early stages of metal oxides' growth characteristics. Taking as initial samples graphene grown by chemical vapor deposition on polycrystalline Cu sheets and then exposed to ambient conditions, this article presents a local study of the inhomogeneities of this air-exposed graphene and how they influence on the subsequent ZnO growth. Firstly, by spatially correlating Raman and x-ray photoemission spectroscopies at the micro and nanoscales, it is shown how chemical species present in air intercalate inhomogeneously between Graphene and Cu. The reason for this is precisely the polycrystalline nature of the Cu support. Moreover, these local inhomogeneities also affect the oxidation level of the uppermost layer of Cu and, consequently, the electronic coupling between graphene and the metallic substrate. In second place, through the same characterization techniques, it is shown how the initial state of graphene/Cu sheets influences the local inhomogeneities of the ZnO deposit during the early stages of growth in terms of both, stoichiometry and morphology. Finally, as a proof of concept, it is shown how altering the initial chemical state and interaction of Graphene with Cu can be used to control the properties of the ZnO deposits.

18.
Front Microbiol ; 11: 572104, 2020.
Artigo em Inglês | MEDLINE | ID: mdl-33324359

RESUMO

Despite being considered an extreme environment, several studies have shown that life in the deep subsurface is abundant and diverse. Microorganisms inhabiting these systems live within the rock pores and, therefore, the geochemical and geohydrological characteristics of this matrix may influence the distribution of underground biodiversity. In this study, correlative fluorescence and Raman microscopy (Raman-FISH) was used to analyze the mineralogy associated with the presence of members of the genus Acidovorax, an iron oxidizing microorganisms, in native rock samples of the Iberian Pyrite Belt subsurface. Our results suggest a strong correlation between the presence of Acidovorax genus and pyrite, suggesting that the mineral might greatly influence its subsurface distribution.

19.
Entropy (Basel) ; 22(5)2020 Apr 30.
Artigo em Inglês | MEDLINE | ID: mdl-33286287

RESUMO

We consider the nonadiabatic energy fluctuations of a many-body system in a time-dependent harmonic trap. In the presence of scale-invariance, the dynamics becomes self-similar and the nondiabatic energy fluctuations can be found in terms of the initial expectation values of the second moments of the Hamiltonian, square position, and squeezing operators. Nonadiabatic features are expressed in terms of the scaling factor governing the size of the atomic cloud, which can be extracted from time-of-flight images. We apply this exact relation to a number of examples: the single-particle harmonic oscillator, the one-dimensional Calogero-Sutherland model, describing bosons with inverse-square interactions that includes the non-interacting Bose gas and the Tonks-Girdardeau gas as limiting cases, and the unitary Fermi gas. We illustrate these results for various expansion protocols involving sudden quenches of the trap frequency, linear ramps and shortcuts to adiabaticity. Our results pave the way to the experimental study of nonadiabatic energy fluctuations in driven quantum fluids.

20.
Phys Rev Lett ; 125(4): 040601, 2020 Jul 24.
Artigo em Inglês | MEDLINE | ID: mdl-32794781

RESUMO

We study the connection between the charging power of quantum batteries and the fluctuations of the extractable work. We prove that in order to have a nonzero rate of change of the extractable work, the state ρ_{W} of the battery cannot be an eigenstate of a "free energy operator," defined by F≡H_{W}+ß^{-1}log(ρ_{W}), where H_{W} is the Hamiltonian of the battery and ß is the inverse temperature of a reference thermal bath with respect to which the extractable work is calculated. We do so by proving that fluctuations in the free energy operator upper bound the charging power of a quantum battery. Our findings also suggest that quantum coherence in the battery enhances the charging process, which we illustrate on a toy model of a heat engine.

SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA