Direct Laser Writing of Silica Nanoparticle Nanocomposites: Probing Mechanical Reinforcement and Understanding Structural Color from Design Parameters.

Nanocomposite materials have been thoroughly exploited in additive manufacturing, as a means to alter physical, chemical, and optical properties of resulting structures. Herein, nanocomposite materials suitable for direct laser writing (DLW) by two-photon polymerization are presented. These materials, comprising silica nanoparticles, bring significant added value to the technology through physical reinforcement and controllable photonic properties. Incorporation into acrylate photoresists, via a one-step fabrication process, enables the formation of complex structures with large overhangs. The inclusion of 150 nm silica nanoparticles in DLW photoresists at high concentrations, allows for the fabrication of composite microstructures that show reflected color, a product of the relative contributions from the quasi-ordering and random scattering. Using common DLW design parameters, such as slicing distance and structure dimension, a wide gamut of structural color, in solution, using a set concentration of nanoparticles is demonstrated. Numerical modeling is employed to predict the reflected wavelength of the pixel arrays, across the visible spectrum, and this information is used to encode reflected colors into different pixel arrays.

Liquid Crystalline Network Microstructures for Stimuli Responsive Labels with Multi-Level Encryption.

Two-photon direct laser writing enables the fabrication of shape-changing microstructures that can be exploited in stimuli responsive micro-robotics and photonics. The use of Liquid Crystalline Networks (LCN) allows to realize 3D micrometric objects that can contract along a specific direction in response to stimuli, such as temperature or light. In this paper, the fabrication of free-standing LCN microstructures is demonstrated as graphical units of a smart tag for simple physical and optical encryption. Using an array of identical pixels, information can be hidden to the observer and revealed only upon application of a specific stimulus. The reading mechanism is based on the shape-change of each pixel under stimuli and their color that combine together in a two-level encryption label. Once the stimulus is removed, the pixels recover their original shape and the message remains completely hidden. Therefore, an opto-mechanical equivalent of an "invisible ink" is realized. This new concept paves the way for introducing enhanced functionalities in smart micro-systems within a single lithography step, spanning from storage devices with physical encryption to complex motion actuators.

Controlled degradation of polycaprolactone-based micropillar arrays.

Herein we demonstrate the fabrication of arrays of micropillars, achieved through the combination of direct laser writing and nanoimprint lithography. By combining two diacrylate monomers, polycaprolactone dimethacrylate (PCLDMA) and 1,6-hexanediol diacrylate (HDDA), two copolymer formulations that, owing to the varying ratios of the hydrolysable ester functionalities present in the polycaprolactone moiety, can be degraded in the presence of base in a controllable manner. As such, the degradation of the micropillars can be tuned over several days as a function of PCLDMA concentration within the copolymer formulations, and the topography greatly varied over a short space of time, as visualised using scanning electron microscopy and atomic force microscopy. Crosslinked neat HDDA was used as a control material, demonstrating that the presence of the PCL was responsible for the ability of the microstructures to degrade in the controlled manner. In addition, the mass loss of the crosslinked materials was minimal, demonstrating the degradation of microstructured surfaces without loss of bulk properties was possible. Moreover, the compatibility of these crosslinked materials with mammalian cells was explored. The influence of both indirect and direct contact of the materials with A549 cells was assessed by profiling indices reflective of cytotoxicity such as morphology, adhesion, metabolic activity, oxidative balance, and release of injury markers. No significant changes in the aforementioned profile were observed in the cells cultured under these conditions for up to 72 h, with the cell-material interaction suggesting these materials may have potential in microfabrication contexts towards biomedical application purposes.

Direct laser writing of vapour-responsive photonic arrays.

Using direct laser writing, arrays of optically responsive ionogel structures were fabricated. To demonstrate their responsive nature, visible colour changes in the presence of different solvent vapours were investigated. This represents a new departure for photonic structural colouration, in which the fabricating structure shows a programmable, controllable, and dynamic stimuli response.

Direct Laser Writing of Four-Dimensional Structural Color Microactuators Using a Photonic Photoresist.

With the advent of direct laser writing using two-photon polymerization, the generation of high-resolution three-dimensional microstructures has increased dramatically. However, the development of stimuli-responsive photoresists to create four-dimensional (4D) microstructures remains a challenge. Herein, we present a supramolecular cholesteric liquid crystalline photonic photoresist for the fabrication of 4D photonic microactuators, such as pillars, flowers, and butterflies, with submicron resolution. These micron-sized features display structural color and shape changes triggered by a variation of humidity or temperature. These findings serve as a roadmap for the design and creation of high-resolution 4D photonic microactuators.

3D Printed Sugar-Sensing Hydrogels.

The ability of boronic acids (BAs) to reversibly bind diols, such as sugars, has been widely studied in recent years. In solution, through the incorporation of additional fluorophores, the BA-sugar interaction can be monitored by changes in fluorescence. Ultimately, a practical realization of this technology requires a transition from solution-based methodologies. Herein, the first example of 3D-printed sugar-sensing hydrogels, achieved through the incorporation of a BA-fluorophore pair in a gelatin methacrylamide-based matrix is presented. Through optimization of monomeric cocktails, it is possible to use extrusion printing to generate structured porous hydrogels which show a measurable and reproducible linear fluorescence response to glucose and fructose up to 100 mm.

The UCD nanosafety workshop (03 December 2018): towards developing a consensus on safe handling of nanomaterials within the Irish university labs and beyond - a report.

Careful handling of the nanomaterials (NMs) in research labs is crucial to ensure a safe working environment. As the largest university in Ireland, University College Dublin (UCD) has invested significant resources to update researchers working with NMs. Due to sizes often <100 nm, the NMs including nanoparticles, harbor unprecedented materialistic properties, for example, enhanced reactivity, conductivity, fluorescence, etc. which albeit conferring the NMs an edge over bulk materials regarding the applied aspects; depending on the dose, also render them to be toxic. Thus, a set of regulatory guidelines have emerged regarding safe handling of the NMs within occupational set-ups. Unfortunately, the current regulations based on the toxic chemicals and carcinogens are often confusing, lack clarity, and difficult to apply for the NMs. As a research-intensive university, a diverse range of research activities occur within the UCD labs, and it is difficult, at times impossible, for the UCD Safety, Insurance, Operational Risk & Compliance (SIRC) office to develop a set of common guidelines and cater throughout all its labs conducting research with the NMs. Hence, a necessity for dialog and exchange of ideas was felt across the UCD which encouraged the researchers including early stage researchers (e.g. PhDs, Postdocs) from multiple schools to participate in a workshop held on the 03 December 2018. The workshop tried to follow a pragmatic approach, where apart from discussing both the in vitro and in vivo scenarios, practical cases simulating situations faced frequently in the labs were discussed. This report summarizes the findings made during the workshop by this emerging critical mass in UCD.

Paper based electronic tongue - a low-cost solution for the distinction of sugar type and apple juice brand.

This work reports on a low cost microfluidic electronic tongue (e-tongue) made with carbon interdigitated electrodes, printed on paper, and coated with boronic acid-containing hydrogels. Using capacitance measurements, the e-tongue was capable of distinguishing between different types of sugars (e.g. glucose, fructose and sucrose), in addition to distinguishing between commercial brands of apple juice using a small volume of sample (6 µL). The channels of the microfluidic e-tongue were made using a wax printer, and were modified with hydrogels containing acrylamide copolymerized with 5 or 20 mol% 3-(acrylamido) phenyl boronic acid (Am-PBA), or a crosslinked homopolymeric hydrogel based on N-(2-boronobenzyl)-2-hydroxy-N,N-dimethylethan-1-aminium-3-sulfopropyl acrylate (DMA-PBA). Such hydrogels, containing a phenyl boronic acid (PBA) moiety, can bind saccharides. Combining various hydrogels of this nature in an e-tongue device enabled discrimination between apple juices, which are known to contain higher amounts of fructose compared to glucose or sucrose. Changes in capacitance were captured with impedance spectroscopy in the frequency range from 0.1 to 10 MHz for solutions with varying concentrations of glucose, fructose and sucrose (from 0 to 0.056 g mL-1). The capacitance data were treated with Principal Component Analysis (PCA) and Interactive Document Map (IDMAP), which then correlated overall sugar content from different brands of apple juice. This low-cost, easy-to-use, disposable e-tongue offers great potential in the routine analysis of food and beverages, while offering comparative performance to alternatives in the literature.

Fluorescent Probes for Sugar Detection.

Herein, a new class of polymerizable boronic acid (BA) monomers are presented, which are used to generate soft hydrogels capable of accurate determination of saccharide concentration. By exploiting the interaction of these cationic BAs with an anionic fluorophore, 8-hydroxypyrene-1,3,6-trisulfonic acid trisodium salt (pyranine), a two-component sugar-sensing system was realized. In the presence of such cationic BAs ( o-BA, m-BA, and p-BA), the fluorescence of pyranine becomes quenched because of the formation of a nonfluorescent BA-fluorophore complex. Upon addition of saccharides, formation of a cyclic boronate ester results in dissociation of the nonfluorescent complex and recovery of the pyranine fluorescence. The response of this system was examined in solution with common monosaccharides, such as glucose, fructose, and galactose. Subsequent polymerization of the BA monomers yielded cross-linked hydrogels which showed similar reversible recovery of fluorescence in the presence of glucose.

Chemistry of 4-[(4-bromophenyl)ethynyl]pyridine at metal surfaces studied by STM.

Molecular architectures (Kagome networks, coordinated/covalent dimers and branched coordination chains) via self-assembly, Ullmann reaction and pyridine coordination of 4-[(4-bromophenyl)ethynyl]pyridine are found to be sensitive to the underlying metallic surfaces. The molecular species were characterised on the surface by low-temperature scanning tunnelling microscopy (LT-STM) at sub-molecular level.

Micro-Capillary Coatings Based on Spiropyran Polymeric Brushes for Metal Ion Binding, Detection, and Release in Continuous Flow.

Micro-capillaries, capable of light-regulated binding and qualitative detection of divalent metal ions in continuous flow, have been realised through functionalisation with spiropyran photochromic brush-type coatings. Upon irradiation with UV light, the coating switches from the passive non-binding spiropyran form to the active merocyanine form, which binds different divalent metal ions (Zn2+, Co2+, Cu2+, Ni2+, Cd2+), as they pass through the micro-capillary. Furthermore, the merocyanine visible absorbance spectrum changes upon metal ion binding, enabling the ion uptake to be detected optically. Irradiation with white light causes reversion of the merocyanine to the passive spiropyran form, with simultaneous release of the bound metal ion from the micro-capillary coating.

Photoswitchable Layer-by-Layer Coatings Based on Photochromic Polynorbornenes Bearing Spiropyran Side Groups.

Herein, we present the synthesis of linear photochromic norbornene polymers bearing spiropyran side groups (poly(SP-R)) and their assembly into layer-by-layer (LbL) films on glass substrates when converted to poly(MC-R) under UV irradiation. The LbL films were composed of bilayers of poly(allylamine hydrochloride) (PAH) and poly(MC-R), forming (PAH/poly(MC-R)) n coatings. The merocyanine (MC) form presents a significant absorption band in the visible spectral region, which allowed tracking of the LbL deposition process by UV-vis spectroscopy, which showed a linear increase of the characteristic MC absorbance band with increasing number of bilayers. The thickness and morphology of the (PAH/poly(MC-R)) n films were characterized by ellipsometry and scanning electron microscopy, respectively, with a height of ∼27.5 nm for the first bilayer and an overall height of ∼165 nm for the (PAH/poly(MC-R))5 multilayer film. Prolonged white light irradiation (22 h) resulted in a gradual decrease of the MC band by 90.4 ± 2.9% relative to the baseline, indicating the potential application of these films as coatings for photocontrolled delivery systems.

Glucose Sensing for Diabetes Monitoring: Recent Developments.

This review highlights recent advances towards non-invasive and continuous glucose monitoring devices, with a particular focus placed on monitoring glucose concentrations in alternative physiological fluids to blood.

Precision control of flow rate in microfluidic channels using photoresponsive soft polymer actuators.

A novel approach that allows control of flow in microfluidic channels with unsurpassed performance using light is described. Valve structures have been created using photoresponsive hydrogels based on spiropyran-functionalised pNIPAAm hydrogels photopolymerised around pillar structures within the channels. Valve actuation is controlled from outside the fluidic system using externally located LEDs. Highly precise and accurate flow rates can be selected by passing real-time flow rate measurements into a PID algorithm. The optimised algorithm also minimises overshoot of the selected flow rate, eliminates flow rate drift, and improves the system response time. In addition to the dramatic improvements in flow rate control, the set up enables the polymer actuation behaviour to be rapidly characterised. The power supply to the LED also provides a useful system diagnostic for monitoring the performance of the valve over time. For example, degradation in the valve actuation due to photodegradation will manifest as an increasing power requirement over time, enabling predictive failure thresholds to be established for particular actuator designs and polymer compositions.

Highly Efficient Triplet Photosensitizers: A Systematic Approach to the Application of Ir(III) Complexes containing Extended Phenanthrolines.

A series of Ir(III) complexes, based on 1,10-phenanthroline featuring aryl acetylene chromophores, were prepared and investigated as triplet photosensitizers. The complexes were synthesized by Sonogashira cross-coupling reactions using a "chemistry-on-the-complex" method. The absorption properties and luminescence lifetimes were successfully tuned by controlling the number and type of light-harvesting group. Intense UV/Vis absorption was observed for the Ir(III) complexes with two light-harvesting groups at the 3- and 8-positions of the phenanthroline. The asymmetric Ir(III) complex (with a triphenylamine (TPA) and a pyrene moiety attached) exhibited the longest lifetime. Red emission was observed for all the complexes in deaerated solutions at room temperature. Their emission at low temperature (77 K) and nanosecond time-resolved transient difference absorption spectra revealed the origin of their triplet excited states. The singlet-oxygen ((1) O2 ) sensitization and triplet-triplet annihilation (TTA)-based upconversion were explored. Highly efficient TTA upconversion (ΦUC =28.1 %) and (1) O2 sensitization (ΦΔ =97.0 %) were achieved for the asymmetric Ir(III) complex, which showed intense absorption in the visible region (λabs =482 nm, ϵ=50900 m(-1) cm(-1) ) and had a long-lived triplet excited state (53.3 µs at RT).

One-Pot, High-Yielding, Oxidative Cyclodehydrogenation Route for N-Doped Nanographene Synthesis.

An intramolecular oxidative cyclodehydrogenation via a one-pot process is described, which induces selective C-C bond formation and bromine functionalization. The application of this new route gives rise to a novel family of partially fused, selectively brominated N-doped pyrimidine graphenes.

Intriguing Diels-Alder products: chiral centres with an added twist.

Two chiral fluoranthene-based polyaromatics were isolated from a Diels-Alder cycloaddition between two molecules of 7,9-diphenylcyclopenta[a]acenapthylene-8-one. The two highly coloured, novel compounds were characterized by a combination of spectroscopic techniques and single crystal X-ray diffraction. Structural differences between the unexpected products included the nature of their conjugated fluoranthene portions and the position, strain and handedness of their chiral centres.