Can the use of an inclinometer improve the positioning of the acetabular component in total hip arthroplasty?

Aims: Accurate placement of the acetabular component is essential in total hip arthroplasty (THA). The purpose of this study was to determine if the ability to achieve inclination of the acetabular component within the 'safe-zone' of 30° to 50° could be improved with the use of an inclinometer. Patients and Methods: We reviewed 167 primary THAs performed by a single surgeon over a period of 14 months. Procedures were performed at two institutions: an inpatient hospital, where an inclinometer was used (inclinometer group); and an ambulatory centre, where an inclinometer was not used as it could not be adequately sterilized (control group). We excluded 47 patients with a body mass index (BMI) of > 40 kg/m2, age of > 68 years, or a surgical indication other than osteoarthritis whose treatment could not be undertaken in the ambulatory centre. There were thus 120 patients in the study, 68 in the inclinometer group and 52 in the control group. The inclination angles of the acetabular component were measured from de-identified plain radiographs by two blinded investigators who were not involved in the surgery. The effect of the use of the inclinometer on the inclination angle was determined using multivariate regression analysis. Results: The mean inclination angle for the THAs in the inclinometer group was 42.9° (95% confidence interval (CI) 41.7° to 44.0°; range 29.0° to 63.8°) and 46.5° (95% CI 45.2° to 47.7°; range 32.8° to 63.2°) in the control group (p < 0.001). Regression analysis identified a 9.1% difference in inclination due to the use of an inclinometer (p < 0.001), and THAs performed without the inclinometer were three times more likely to result in inclination angles of > 50° (odds ratio (OR) 2.8, p = 0.036). The correlation coefficient for the interobserver reliability of the measurement of the two investigators was 0.95 (95% CI 0.93 to 0.97). Conclusion: The use of a simple inclinometer resulted in a significant reduction in the number of outliers compared with a freehand technique. Cite this article: Bone Joint J 2018;100-B:862-6.

Outcomes of dual mobility components in total hip arthroplasty: a systematic review of the literature.

AIMS: Instability remains a challenging problem in both primary and revision total hip arthroplasty (THA). Dual mobility components confer increased stability, but there are concerns about the unique complications associated with these designs, as well as the long-term survivorship. MATERIALS AND METHODS: We performed a systematic review of all English language articles dealing with dual mobility THAs published between 2007 and 2016 in the MEDLINE and Embase electronic databases. A total of 54 articles met inclusion criteria for the final analysis of primary and revision dual mobility THAs and dual mobility THAs used in the treatment of fractures of the femoral neck. We analysed the survivorship and rates of aseptic loosening and of intraprosthetic and extra-articular dislocation. RESULTS: For the 10 783 primary dual mobility THAs, the incidence of aseptic loosening was 1.3% (142 hips); the rate of intraprosthetic dislocation was 1.1% (122 hips) and the incidence of extra-articular dislocation was 0.46% (41 hips). The overall survivorship of the acetabular component and the dual mobility components was 98.0%, with all-cause revision as the endpoint at a mean follow-up of 8.5 years (2 to 16.5). For the 3008 revision dual mobility THAs, the rate of aseptic acetabular loosening was 1.4% (29 hips); the rate of intraprosthetic dislocation was 0.3% (eight hips) and the rate of extra-articular dislocation was 2.2% (67 hips). The survivorship of the acatabular and dual mobility components was 96.6% at a mean of 5.4 years (2 to 8). For the 554 dual mobility THAs which were undertaken in patients with a fracture of the femoral neck, the rate of intraprosthetic dislocation was 0.18% (one hip), the rate of extra-articular dislocation was 2.3% (13 hips) and there was one aseptic loosening. The survivorship was 97.8% at a mean of 1.3 years (0.75 to 2). CONCLUSION: Dual mobility articulations are a viable alternative to traditional bearing surfaces, with low rates of instability and good overall survivorship in primary and revision THAs, and in those undertaken in patients with a fracture of the femoral neck. The incidence of intraprosthetic dislocation is low and limited mainly to earlier designs. High-quality, prospective, comparative studies are needed to evaluate further the use of dual mobility components in THA. Cite this article: Bone Joint J 2018;100-B:11-19.

Do higher-volume hospitals provide better value in revision hip and knee arthroplasty?

AIMS: The purpose of this study is to determine if higher volume hospitals have lower costs in revision hip and knee arthroplasty. MATERIALS AND METHODS: We questioned the Centres for Medicare and Medicaid Services (CMS) Inpatient Charge Data and identified 789 hospitals performing a total of 29 580 revision arthroplasties in 2014. Centres were dichotomised into high-volume (performing over 50 revision cases per year) and low-volume. Mean total hospital-specific charges and inpatient payments were obtained from the database and stratified based on Diagnosis Related Group (DRG) codes. Patient satisfaction scores were obtained from the multiyear CMS Hospital Compare database. RESULTS: High-volume hospitals comprised 178 (30%) of the total but performed 15 068 (51%) of all revision cases, including 509 of 522 (98%) of the most complex DRG 466 cases. While high-volume hospitals had higher Medicare inpatient payments for DRG 467 ($21 458 versus $20 632, p = 0.038) and DRG 468 ($17 003 versus $16 120, p = 0.011), there was no difference in hospital specific charges between the groups. Higher-volume facilities had a better CMS hospital star rating (3.63 versus 3.35, p < 0.001). When controlling for hospital geographic and demographic factors, high-volume revision hospitals are less likely to be in the upper quartile of inpatient Medicare costs for DRG 467 (odds ratio (OR) 0.593, 95% confidence intervals (CI) 0.374 to 0.941, p = 0.026) and DRG 468 (OR 0.451, 95% CI 0.297 to 0.687, p < 0.001). CONCLUSION: While a high-volume hospital is less likely to be a high cost outlier, the higher mean Medicare reimbursements at these facilities may be due to increased case complexity. Further study should focus on measures for cost savings in revision total joint arthroplasties. Cite this article: Bone Joint J 2017;99-B:1611-17.

The surgical approach for revision total knee arthroplasty.

A key to the success of revision total knee arthroplasty (TKA) is a safe surgical approach using an exposure that minimises complications. In most patients, a medial parapatellar arthrotomy with complete synovectomy is sufficient. If additional exposure is needed, a quadriceps snip performed through the quadriceps tendon often provides the additional exposure required. It is simple to perform and does not alter the post-operative rehabilitative protocol. In rare cases, in which additional exposure is needed, or when removal of a cemented long-stemmed tibial component is required, a tibial tubercle osteotomy (TTO) may be used. Given the risk of post-operative extensor lag, a V-Y quadricepsplasty is rarely indicated and usually considered only if TTO is not possible.

Large diameter femoral heads: is bigger always better?

Dislocation remains among the most common complications of, and reasons for, revision of both primary and revision total hip replacements (THR). Hence, there is great interest in maximising stability to prevent this complication. Head size has been recognised to have a strong influence on the risk of dislocation post-operatively. As femoral head size increases, stability is augmented, secondary to an increase in impingement-free range of movement. Larger head sizes also greatly increase the 'jump distance' required for the head to dislocate in an appropriately positioned cup. Level-one studies support the use of larger diameter heads as they decrease the risk of dislocation following primary and revision THR. Highly cross-linked polyethylene has allowed us to increase femoral head size, without a marked increase in wear. However, the thin polyethylene liners necessary to accommodate larger heads may increase the risk of liner fracture and larger heads have also been implicated in causing soft-tissue impingement resulting in groin pain. Larger diameter heads also impart larger forces on the femoral trunnion, which may contribute to corrosion, metal release, and adverse local tissue reactions. Alternative large bearings including large ceramic heads and dual mobility bearings may mitigate some of these risks, and several of these devices have been used with clinical success.

What do we know about taper corrosion in total hip arthroplasty?

Mechanically assisted crevice corrosion (MACC) at metal/metal modular junctions in which at least one of the components is fabricated from cobalt-chromium alloy, has reemerged as a potential clinically significant complication in total hip arthroplasty. The clinical manifestation of MACC may include the development of an adverse local tissue reaction (ALTR), similar to what has been described in association with metal-on-metal bearing total hip and resurfacing arthroplasty. The clinical presentation of MACC-associated ALTRs may include pain and possibly late recurrent dislocations. Abnormal metal artifact reduction sequence magnetic resonance images and elevated serum metal levels (cobalt elevations out of proportion to chromium elevations) can be helpful in the diagnosis of these MACC-associated ALTRs.

The two-stage standard in revision total hip replacement.

Two-stage exchange remains the gold standard for treatment of peri-prosthetic joint infection after total hip replacement (THR). In the first stage, all components and associated cement if present are removed, an aggressive debridement is undertaken including a complete synovectomy, and an antibiotic-loaded cement spacer is put in place. Patients are then treated with six weeks of parenteral antibiotics, followed by an 'antibiotic free period' to help ensure the infection has been eradicated. If the clinical evaluation and serum inflammatory markers suggest the infection has resolved, then the second stage can be completed, which involves removal of the cement spacer, repeat debridement, and placement of a new THR.

Intra-operative fractures during THA: see it before it sees us.

The purpose of this paper is to discuss the risk factors, prevention strategies, classification, and treatment of intra-operative femur fractures sustained during primary and revision total hip arthroplasty.

What would you do?: challenges in hip surgery.

A moderator and panel of five experts led an interactive session in discussing five challenging and interesting patient case presentations involving surgery of the hip. The hip pathologies reviewed included failed open reduction internal fixation of subcapital femoral neck fracture, bilateral hip disease, evaluation of pain after metal-on-metal hip arthroplasty, avascular necrosis, aseptic loosening secondary to osteolysis and polyethylene wear, and management of ceramic femoral head fracture.

Hip and knee arthroplasty 2011: what's new, what's true, does it matter? Evidence based issues.

This conversation represents an attempt by several arthroplasty surgeons to critique several abstracts presented over the last year as well as to use them as a jumping off point for trying to figure out where they fit in into our current understanding of multiple issues in modern hip and knee arthroplasty.

A novel technique for the removal of well-fixed, porous-coated acetabular components with spike fixation.

The removal of well-fixed, porous-coated acetabular components at the time of revision total hip arthroplasty can be challenging. The presence of spike fixation can increase the difficulty of removing an acetabular component because traditional methods of component removal, such as the use of curved gouges, may not be possible. We report a novel technique for the removal of well-fixed, porous-coated acetabular components with adjunctive spike fixation. This technique uses an overlay template that targets the spikes for removal with a high-speed, carbide-tipped bur.

Iliopsoas tendinitis after total hip arthroplasty.

Determination of the cause of groin pain after total hip arthroplasty can be difficult. The case of a patient with an unusual cause of groin pain after total hip arthroplasty, iliopsoas tendinitis, is presented. The patient failed nonoperative treatment and underwent surgical release of the iliopsoas tendon with complete resolution of symptoms.

The relationship of the factor V Leiden mutation or the deletion-deletion polymorphism of the angiotensin converting enzyme to postoperative thromboembolic events following total joint arthroplasty.

BACKGROUND: Although all patients undergoing total joint arthroplasty are subjected to similar risk factors that predispose to thromboembolism, only a subset of patients develop this complication. The objective of this study was to determine whether a specific genetic profile is associated with a higher risk of developing a postoperative thromboembolic complication. Specifically, we examined if the Factor V Leiden (FVL) mutation or the deletion polymorphism of the angiotensin-converting enzyme (ACE) gene increased a patient's risk for postoperative thromboembolic events. The FVL mutation has been associated with an increased risk of idiopathic thromboembolism and the deletion polymorphism of the ACE gene has been associated with increased vascular tone, attenuated fibrinolysis and increased platelet aggregation. METHODS: The presence of these genetic profiles was determined for 38 patients who had a postoperative symptomatic pulmonary embolus or proximal deep venous thrombosis and 241 control patients without thrombosis using molecular biological techniques. RESULTS: The Factor V Leiden mutation was present in none of the 38 experimental patients and in 3% or 8 of the 241 controls (p = 0.26). Similarly there was no difference detected in the distribution of polymorphisms for the ACE gene with the deletion-deletion genotype present in 36% or 13 of the 38 experimental patients and in 31% or 74 of the 241 controls (p = 0.32). CONCLUSIONS: Our results suggest that neither of these potentially hypercoaguable states are associated with an increased risk of symptomatic thromboembolic events following total hip or knee arthroplasty in patients receiving pharmacological thromboprophylaxis.

Spontaneous rib fracture during pregnancy. A case report and review of the literature.

No studies have demonstrated a direct relationship between pregnancy and rib fracture. A case of spontaneous rib fracture in the third trimester presents the opportunity to examine factors unique to pregnancy that may predispose the patient to stress fractures of the lower ribs. A 28-year old woman in week 31 of her pregnancy presented with the chief complaint of acute onset of right upper quadrant pain. A chest radiograph demonstrated a minimally displaced fracture of the right 10th rib. During pregnancy, the enlarging uterus causes certain opposing muscular forces to act on the ribs, making them more susceptible to fracture after minimal trauma or after repeated stresses such as a chronic cough.

Hip arthroplasty with a collared straight cobalt-chrome femoral stem using second-generation cementing technique: a 10-year-average follow-up study.

Clinical and radiographic results of 116 patients who had undergone 132 hip arthroplasties at our institution from 1983 to 1988 with a collared cemented straight cobalt-chrome femoral stem using second-generation cementing technique were reviewed. Twenty hips in 20 patients who were part of the original cohort were lost to follow-up. Mean age at the time of surgery was 68.2 years. Mean radiographic follow-up was 9.6 years with a minimum follow-up of 5 years. Ten-year survivorship of the component was 96.5% with revision considered as an endpoint and 94.2% with either revision or radiographic loosening considered the endpoint. Three implants (2.3%) were revised for aseptic loosening at a mean of 8.1 years after implantation. One implant (0.8%) was revised for septic loosening at 10.5 years after surgery. Of the implants not revised, 1 showed evidence of circumferential bone-cement radiolucencies, and 1 had radiolucencies at the implant-cement interface. Five of the surviving femoral components (5.0%) showed focal areas of cystic osteolysis, and proximal femoral bone resorption under the collar was seen in 32 patients (31.7%). There were no cases of cement fracture or stem subsidence. The biomechanical and material properties of this stem combined with second-generation cementing technique look promising for long-term survivorship.

Anticoagulant treatment of thromboembolism with intravenous heparin therapy in the early postoperative period following total joint arthroplasty.

BACKGROUND: Treatment of thromboembolism with intravenous heparin therapy in the early postoperative period after total joint arthroplasty has been associated with a high rate of complications. The purpose of the present study was to compare the rate of bleeding complications in a group of patients who required intravenous heparin therapy for the treatment of thromboembolism after total hip or knee arthroplasty with the rate in a control group of patients who received only prophylactic anticoagulation. METHODS: The postoperative courses of forty-four consecutive patients who were managed with intravenous administration of heparin and oral administration of warfarin for the treatment of a thromboembolic event following unilateral total hip or knee arthroplasty were compared with those of a control group of 376 consecutive patients who had these same procedures but did not have a thromboembolic complication. The patients in the control group were managed with prophylactic anticoagulation with use of enoxaparin. Sixty-eight percent (thirty) of the forty-four patients in the heparin group received the initial dose of heparin on or before the fourth postoperative day, and 82 percent (thirty-six) received an initial bolus of 5000 units of heparin at the initiation of therapy. RESULTS: The rate of bleeding complications was 9 percent (four of forty-four) in the heparin group, compared with 6 percent (twenty-three of 376) in the control group (p = 0.44). The mean transfusion requirement in the heparin group (1.8 units of packed red blood cells) was significantly greater than that in the control group (0.8 unit) (p < 0.0001). Three of the four patients who had a bleeding complication while receiving heparin and warfarin had coagulation parameters that were substantially higher than recommended levels. The mean duration of hospitalization in the heparin group (fifteen days) was significantly longer than that in the control group (seven days) (p < 0.0001). CONCLUSIONS: The results of the present study suggest that the use of intravenous heparin therapy for the treatment of thromboembolism in the early postoperative period after total joint arthroplasty is associated with a rate of bleeding complications that is similar to that associated with the use of prophylactic anticoagulation with use of enoxaparin alone. One should expect an increased transfusion requirement and a longer duration of hospitalization for patients who require intravenous heparin therapy for the treatment of a thromboembolic event.

Wear rates of ceramic-on-ceramic bearing surfaces in total hip implants: a 12-year follow-up study.

A retrospective clinical and radiographic analysis was performed on 58 patients (60 hips; mean age at time of surgery, 45.2 years) at a minimum of 10-year follow-up (mean, 12.7 years) after total hip replacement using a ceramic-on-ceramic hearing total hip implant (Autophor, Smith and Nephew, Memphis, TN). Mean wear rate at final follow-up was 0.21 mim, averaging 0.016 mm/y. There were no cases of periprosthetic osteolysis in the acetabuulum or femur. For the unrevised components, there were 3 (5%) cases of protrusio acetabuli and 4 (7%) cases of acetabular component loosening. On the femoral side, 78.3% had distal pedestal formation, and 83% had greater than 2 mm implant-bone radiolucencies in more than 5 Gruen zones as a result of gross motion of the stem. Despite radiographic evidence of implant loosening, this hard bearing articulation functioned well in vivo for more than 12 years with remarkably low wear--approximately one tenth the rate reported for metal-on-polyethylene total hip bearings.

The role of intraoperative Gram stain in revision total joint arthroplasty.

The ability to identify intraoperatively patients with an infected prosthesis at the time of a revision procedure assists the surgeon in selecting appropriate management. The results of 413 intraoperative Gram stains were compared with the results of operative cultures, permanent histology, and the surgeon's intraoperative assessment to determine the ability of Gram stains to identify periprosthetic infection. Gram staining correctly identified the presence of infection in 10 of the 68 cases that met study criteria for infection (sensitivity of 14.7%). Four false-positive Gram stains were encountered. Intraoperative Gram stains do not have adequate sensitivity to be helpful in identifying periprosthetic infection and should not be performed on a routine basis. They may be helpful, however, in cases in which gross purulence is encountered to assist in the selection of initial antibiotic therapy. The use of intraoperative Gram staining alone is inadequate for ruling out infection at the time of revision total joint arthroplasty.