Underwater ghost imaging with detection distance up to 9.3 attenuation lengths.

Underwater ghost imaging LiDAR is an effective method of underwater detection. In this research, theoretical and experimental investigations were conducted on underwater ghost imaging, combining the underwater optical field transmission model with the inherent optical parameters of a water body. In addition, the Wells model and the approximate Sahu-Shanmugam scattering phase function were used to create a model for underwater optical transmission. The second-order Glauber function of the optical field was then employed to analyze the scattering field degradation during the transmission process. The simulation and experimental results verified that the proposed underwater model could better reveal the degrading effect of a water body on ghost imaging. A further series of experiments comparing underwater ghost imaging at different detection distances was also conducted. In the experimental system, gated photomultiplier tube (PMT) was used to filter out the peak of backscattering, allowing a larger gain to be set for longer-range detection of the target. The laser with a central wavelength of 532 nm was operated at a frequency of 2 KHz, with a single pulse energy of 2 mJ, a pulse width of 10 ns. High-reflective targets were imaged up to 65.2 m (9.3 attenuation lengths (ALs), attenuation coefficient c = 0.1426 m-1, and scattering coefficient b = 0.052 m-1) and diffuse-reflection targets up to 41.2 m (6.4 ALs, c = 0.1569 m-1, and b = 0.081 m-1). For the Jerlov-I (c = 0.048 m-1 and b = 0.002 m-1) water body, the experimentally obtained maximum detection distance of 9.3 ALs can be equivalent to 193.7 m under the same optical system conditions.

Experimental investigation of chirped amplitude modulation heterodyne ghost imaging.

We have constructed a chirped amplitude modulation heterodyne ghost imaging (CAM-HGI) experimental system that demonstrates a robust ability against background light in experiments. In the experiments, the background light is simulated by irradiating a spatiotemporal random modulated light field onto the target. The effects of background light, modulation depth and modulation duration of the signal light source on CAM-HGI are investigated experimentally. The results show that the quality of CAM-HGI can be improved by increasing the modulation depth and the modulation duration of the signal light source, and more importantly, an image with a good signal-to-noise ratio (SNR) can be achieved even when the irradiation SNR is lower than -30 dB. This technique of CAM-HGI has an important application prospect for laser imaging in strong background light environments.

Pulse-compression ghost imaging lidar via coherent detection.

Ghost imaging (GI) lidar, as a novel remote sensing technique, has been receiving increasing interest in recent years. By combining pulse-compression technique and coherent detection with GI, we propose a new lidar system called pulse-compression GI lidar. Our analytical results, which are backed up by numerical simulations, demonstrate that pulse-compression GI lidar can obtain the target's spatial intensity distribution, range and moving velocity. Compared with conventional pulsed GI lidar system, pulse-compression GI lidar, without decreasing the range resolution, is easy to obtain high single pulse energy with the use of a long pulse, and the mechanism of coherent detection can eliminate the influence of the stray light, which is helpful to improve the detection sensitivity and detection range.