High-Pressure Electro-Fenton Driving CH4 Conversion by O2 at Room Temperature.

Electrochemical conversion of CH4 to easily transportable and value-added liquid fuels is highly attractive for energy-efficient CH4 utilization, but it is challenging due to the low reactivity and solubility of CH4 in the electrolyte. Herein, we report a high-pressure electro-Fenton (HPEF) strategy to establish a hetero-homogeneous process for the electrocatalytic conversion of CH4 by O2 at room temperature. In combination with elevation of reactant pressure to accelerate reaction kinetics, it delivers an unprecedented HCOOH productivity of 11.5 mmol h-1 gFe-1 with 220 times enhancement compared to that under ambient pressure. Remarkably, an HCOOH Faradic efficiency of 81.4% can be achieved with an ultralow cathodic overpotential of 0.38 V. The elevated pressure not only promotes the electrocatalytic reduction of O2 to H2O2 but also increases the reaction collision probability between CH4 and •OH, which is in situ generated from the Fe2+-facilitated decomposition of H2O2.

Edge-rich molybdenum disulfide tailors carbon-chain growth for selective hydrogenation of carbon monoxide to higher alcohols.

Selective hydrogenation of carbon monoxide (CO) to higher alcohols (C2+OH) is a promising non-petroleum route for producing high-value chemicals, in which precise regulations of both C-O cleavage and C-C coupling are highly essential but remain great challenges. Herein, we report that highly selective CO hydrogenation to C2-4OH is achieved over a potassium-modified edge-rich molybdenum disulfide (MoS2) catalyst, which delivers a high CO conversion of 17% with a superior C2-4OH selectivity of 45.2% in hydrogenated products at 240 °C and 50 bar, outperforming previously reported non-noble metal-based catalysts under similar conditions. By regulating the relative abundance of edge to basal plane, C2-4OH to methanol selectivity ratio can be overturned from 0.4 to 2.2. Mechanistic studies reveal that sulfur vacancies at MoS2 edges boost carbon-chain growth by facilitating not only C-O cleavage but also C-C coupling, while potassium promotes the desorption of alcohols via electrostatic interaction with hydroxyls, thereby enabling preferential formation of C2-4OH.

Boosting CO2 Hydrogenation to Formate over Edge-Sulfur Vacancies of Molybdenum Disulfide.

Synthesis of formate from hydrogenation of carbon dioxide (CO2 ) is an atom-economic reaction but is confronted with challenges in developing high-performance non-precious metal catalysts for application of the process. Herein, we report a highly durable edge-rich molybdenum disulfide (MoS2 ) catalyst for CO2 hydrogenation to formate at 200 °C, which delivers a high selectivity of over 99 % with a superior turnover frequency of 780.7 h-1 surpassing those of previously reported non-precious metal catalysts. Multiple experimental characterization techniques combined with theoretical calculations reveal that sulfur vacancies at MoS2 edges are the active sites and the selective production of formate is enabled via a completely new water-mediated hydrogenation mechanism, in which surface OH* and H* species in dynamic equilibrium with water serve as moderate hydrogenating agents for CO2 with residual O* reduced by hydrogen. This study provides a new route for developing low-cost high-performance catalysts for CO2 hydrogenation to formate.

Membrane Electrode Assembly for Electrocatalytic CO2 Reduction: Principle and Application.

Electrocatalytic CO2 reduction reaction (CO2 RR) in membrane electrode assembly (MEA) systems is a promising technology. Gaseous CO2 can be directly transported to the cathode catalyst layer, leading to enhanced reaction rate. Meanwhile, there is no liquid electrolyte between the cathode and the anode, which can help to improve the energy efficiency of the whole system. The remarkable progress achieved recently points out the way to realize industrially relevant performance. In this review, we focus on the principles in MEA for CO2 RR, focusing on gas diffusion electrodes and ion exchange membranes. Furthermore, anode processes beyond the oxidation of water are considered. Besides, the voltage distribution is scrutinized to identify the specific losses related to the individual components. We also summarize the progress on the generation of different reduced products together with the corresponding catalysts. Finally, the challenges and opportunities are highlighted for future research.

Evolution of Stabilized 1T-MoS2 by Atomic-Interface Engineering of 2H-MoS2 /Fe-Nx towards Enhanced Sodium Ion Storage.

Metallic conductive 1T phase molybdenum sulfide (MoS2 ) has been identified as promising anode for sodium ion (Na+ ) batteries, but its metastable feature makes it difficult to obtain and its restacking during the charge/discharge processing result in part capacity reversibility. Herein, a synergetic effect of atomic-interface engineering is employed for constructing 2H-MoS2 layers assembled on single atomically dispersed Fe-N-C (SA Fe-N-C) anode material that boosts its reversible capacity. The work-function-driven-electron transfer occurs from SA Fe-N-C to 2H-MoS2 via the Fe-S bonds, which enhances the adsorption of Na+ by 2H-MoS2 , and lays the foundation for the sodiation process. A phase transfer from 2H to 1T/2H MoS2 with the ferromagnetic spin-polarization of SA Fe-N-C occurs during the sodiation/desodiation process, which significantly enhances the Na+ storage kinetics, and thus the 1T/2H MoS2 /SA Fe-N-C display a high electronic conductivity and a fast Na+ diffusion rate.

Surface-Preferred Crystal Plane Growth Enabled by Underpotential Deposited Monolayer toward Dendrite-Free Zinc Anode.

Aqueous Zn batteries with ideal energy density and absolute safety are deemed the most promising candidates for next-generation energy storage systems. Nevertheless, stubborn dendrite formation and notorious parasitic reactions on the Zn metal anode have significantly compromised the Coulombic efficiency (CE) and cycling stability, severely impeding the Zn metal batteries from being deployed in the proposed applications. Herein, instead of random growth of Zn dendrites, a guided preferential growth of planar Zn layers is accomplished via atomic-scale matching of the surface lattice between the hexagonal close-packed (hcp) Zn(002) and face-centered cubic (fcc) Cu(100) crystal planes, as well as underpotential deposition (UPD)-enabled zincophilicity. The underlying mechanism of uniform Zn plating/stripping on the Cu(100) surface is demonstrated by ab initio molecular dynamics simulations and density functional theory calculations. The results show that each Zn atom layer is driven to grow along the exposed closest packed plane (002) in hcp Zn metal with a low lattice mismatch with Cu(100), leading to compact and planar Zn deposition. In situ optical visualization inspection is adopted to monitor the dynamic morphology evolution of such planar Zn layers. With this surface texture, the Zn anode exhibits exceptional reversibility with an ultrahigh Coulombic efficiency (CE) of 99.9%. The MnO2//Zn@Cu(100) full battery delivers long cycling stability over 548 cycles and outstanding specific energy and power density (112.5 Wh kg-1 even at 9897.1 W kg-1). This work is expected to address the issues associated with Zn metal anodes and promote the development of high-energy rechargeable Zn metal batteries.

Direct conversion of N2 and O2: status, challenge and perspective.

As key components of air, nitrogen (N2) and oxygen (O2) are the vital constituents of lives. Synthesis of NO2, and C-N-O organics direct from N2 and O2, rather than from an intermediate NH3 (known as the Haber-Bosch process), is tantalizing. However, the extremely strong N≡N triple bond (945 kJ mol-1) and the nonpolar stable electron configuration of dinitrogen lead to its conversion being extensively energy demanding. The further selective synthesis of high-value C-N-O organics directly from N2, O2 and C-containing molecules is attractive yet greatly challenging from both scientific and engineering perspectives. Enormous efforts have been dedicated to the direct conversion of N2 and O2 via traditional and novel techniques, including thermochemical, plasma, electrochemical, ultrasonic and photochemical conversion. In this review, we aim to provide a thorough comprehension of the status and challenge of the direct conversion of N2, O2 and C-containing molecules (particularly N2 and O2). Moreover, we will propose some future perspectives to stimulate more inspiration from the scientific community to tackle the scientific and engineering challenges.

Highly efficient ethylene production via electrocatalytic hydrogenation of acetylene under mild conditions.

Renewable energy-based electrocatalytic hydrogenation of acetylene to ethylene (E-HAE) under mild conditions is an attractive substitution to the conventional energy-intensive industrial process, but is challenging due to its low Faradaic efficiency caused by competitive hydrogen evolution reaction. Herein, we report a highly efficient and selective E-HAE process at room temperature and ambient pressure over the Cu catalyst. A high Faradaic efficiency of 83.2% for ethylene with a current density of 29 mA cm-2 is reached at -0.6 V vs. the reversible hydrogen electrode. In-situ spectroscopic characterizations combined with first-principles calculations reveal that electron transfer from the Cu surface to adsorbed acetylene induces preferential adsorption and hydrogenation of the acetylene over hydrogen formation, thus enabling a highly selective E-HAE process through the electron-coupled proton transfer mechanism. This work presents a feasible route for high-efficiency ethylene production from E-HAE.

Electron penetration triggering interface activity of Pt-graphene for CO oxidation at room temperature.

Achieving CO oxidation at room temperature is significant for gas purification but still challenging nowadays. Pt promoted by 3d transition metals (TMs) is a promising candidate for this reaction, but TMs are prone to be deeply oxidized in an oxygen-rich atmosphere, leading to low activity. Herein we report a unique structure design of graphene-isolated Pt from CoNi nanoparticles (PtǀCoNi) for efficiently catalytic CO oxidation in an oxygen-rich atmosphere. CoNi alloy is protected by ultrathin graphene shell from oxidation and therefore modulates the electronic property of Pt-graphene interface via electron penetration effect. This catalyst can achieve near 100% CO conversion at room temperature, while there are limited conversions over Pt/C and Pt/CoNiOx catalysts. Experiments and theoretical calculations indicate that CO will saturate Pt sites, but O2 can adsorb at the Pt-graphene interface without competing with CO, which facilitate the O2 activation and the subsequent surface reaction. This graphene-isolated system is distinct from the classical metal-metal oxide interface for catalysis, and it provides a new thought for the design of heterogeneous catalysts.

Highly efficient conversion of surplus electricity to hydrogen energy via polysulfides redox.

Decoupled electrolysis of water is a promising strategy for peak load regulation of electricity. The key to developing this technology is to construct decoupled devices containing stable redox mediators and corresponding efficient catalysts, which remains a considerable challenge. Herein, we designed a high-performance device, using polysulfides as mediators and graphene-encapsulated CoNi as catalysts. It produced H2 with a low potential of 0.82 V at 100 mA/cm2, saving 60.2% more energy than direct water electrolysis. The capacity of H2 production reached 2.5×105 mAh/cm2, which is the highest capacity reported so far. This device exhibited excellent cyclability in 15-day recycle tests, without any decay of performance. The calculation results revealed that the electronic structure of the graphene shell was modulated by the electron transfer from N-dopant and metal core, which significantly facilitated recycle of polysulfides on graphene surfaces. This study provides a promising method for constructing a smart grid by developing efficient decoupled devices.

Inactivating SARS-CoV-2 by electrochemical oxidation.

Fully inactivating SARS-CoV-2, the virus causing coronavirus disease 2019, is of key importance for interrupting virus transmission but is currently performed by using biologically or environmentally hazardous disinfectants. Herein, we report an eco-friendly and efficient electrochemical strategy for inactivating the SARS-CoV-2 using in-situ formed nickel oxide hydroxide as anode catalyst and sodium carbonate as electrolyte. At a voltage of 5 V, the SARS-CoV-2 viruses can be rapidly inactivated with disinfection efficiency reaching 95% in only 30 s and 99.99% in 5 min. Mass spectrometry analysis and theoretical calculations indicate that the reactive oxygen species generated on the anode can oxidize the peptide chains and induce cleavage of the peptide backbone of the receptor binding domain of the SARS-CoV-2 spike glycoprotein, and thereby disables the virus. This strategy provides a sustainable and highly efficient approach for the disinfection of the SARS-CoV-2 viruliferous aerosols and wastewater.

Mortality prediction using a novel combination of biomarkers in the first day of sepsis in intensive care units.

Early identification of infection severity and organ dysfunction is crucial in improving outcomes of patients with sepsis. We aimed to develop a new combination of blood-based biomarkers that can early predict 28-day mortality in patients with sepsis or septic shock. We enrolled 66 patients with sepsis or septic shock and compared 14 blood-based biomarkers in the first 24 h after ICU admission. The serum levels of interleukin-6 (IL-6) (median 217.6 vs. 4809.0 pg/ml, P = 0.001), lactate (median 2.4 vs. 6.3 mmol/L, P = 0.014), N-terminal prohormone of brain natriuretic peptide (NT-proBNP) (median 1596.5 vs. 32,905.3 ng/ml, P < 0.001), prothrombin time (PT) (median 15.6 vs. 20.1 s, P = 0.030), activated partial thrombin time (APTT) (median 45.1 vs. 59.0 s, P = 0.026), and international normalized ratio (INR) (median 1.3 vs. 1.8, P < 0.001) were significantly lower in the survivor group. IL-6, NT-proBNP, and INR provided the best individual performance in predicting 28-day mortality of patients with sepsis or septic shock. Furthermore, the combination of these three biomarkers achieved better predictive performance (AUC 0.890, P < 0.001) than conventional scoring systems. In summary, the combination of IL-6, NT-proBNP, and INR may serve as a potential predictor of 28-day mortality in critically ill patients with sepsis or septic shock.

Nonuniform Electric Field-Enhanced In-Source Declustering in High-Pressure Photoionization/Photoionization-Induced Chemical Ionization Mass Spectrometry for Operando Catalytic Reaction Monitoring.

Photoionization mass spectrometry (PI-MS) is a powerful and highly sensitive analytical technique for online monitoring of volatile organic compounds (VOCs). However, due to the large difference of PI cross sections for different compounds and the limitation of photon energy, the ability of lamp-based PI-MS for detection of compounds with low PI cross sections and high ionization energies (IEs) is insufficient. Although the ion production rate can be improved by elevating the ion source pressure, the problem of generating plenty of cluster ions, such as [MH]+·(H2O)n (n = 1 and 2) and [M2]+, needs be solved. In this work, we developed a new nonuniform electric field high-pressure photoionization/photoionization-induced chemical ionization (NEF-HPPI/PICI) source with the abilities of both HPPI and PICI, which was accomplished through ion-molecule reactions with high-intensity H3O+ reactant ions generated by photoelectron ionization (PEI) of water molecules. By establishing a nonuniform electric field in a three-zone ionization region to enhance in-source declustering and using 99.999% helium as the carrier gas, not only the formation of cluster ions was significantly diminished, but the ion transmission efficiency was also improved. Consequently, the main characteristic ion for each analyte both in HPPI and PICI occupied more than 80%, especially [HCOOH·H]+ with a yield ratio of 99.2% for formic acid. The analytical capacity of this system was demonstrated by operando monitoring the hydrocarbons and oxygenated VOC products during the methanol-to-olefins and methane conversion catalytic reaction processes, exhibiting wide potential applications in process monitoring, reaction mechanism research, and online quality control.

Boosting hydrogen evolution on MoS2 via co-confining selenium in surface and cobalt in inner layer.

The lack of highly efficient, inexpensive catalysts severely hinders large-scale application of electrochemical hydrogen evolution reaction (HER) for producing hydrogen. MoS2 as a low-cost candidate suffers from low catalytic performance. Herein, taking advantage of its tri-layer structure, we report a MoS2 nanofoam catalyst co-confining selenium in surface and cobalt in inner layer, exhibiting an ultra-high large-current-density HER activity surpassing all previously reported heteroatom-doped MoS2. At a large current density of 1000 mA cm-2, a much lower overpotential of 382 mV than that of 671 mV over commercial Pt/C catalyst is achieved and stably maintained for 360 hours without decay. First-principles calculations demonstrate that inner layer-confined cobalt atoms stimulate neighbouring sulfur atoms while surface-confined selenium atoms stabilize the structure, which cooperatively enable the massive generation of both in-plane and edge active sites with optimized hydrogen adsorption activity. This strategy provides a viable route for developing MoS2-based catalysts for industrial HER applications.

Robust Interface Ru Centers for High-Performance Acidic Oxygen Evolution.

RuO2 is considered as the state-of-the-art electrocatalyst for the oxygen evolution reaction (OER) in acidic media. However, its practical application is largely hindered by both the high reaction overpotential and severe electrochemical corrosion of the active centers. To overcome these limitations, innovative design strategies are necessary, which remains a great challenge. Herein, robust interface Ru centers between RuO2 and graphene, via a controllable oxidation of graphene encapsulating Ru nanoparticles, are presented to efficiently enhance both the activity and stability of the acidic OER. Through precisely controlling the reaction interface, a much lower OER overpotential of only 227 mV at 10 mA cm-2 in acidic electrolyte, compared with that of 290 mV for commercial RuO2 , but a significantly higher durability than the commercial RuO2 , are achieved. Density functional theory (DFT) calculations reveal that the interface Ru centers between the RuO2 and the graphene can break the classic scaling relationships between the free energies of HOO* and HO* to reduce the limiting potential, rendering an enhancement in the intrinsic OER activity and the resistance to over-oxidation and corrosion for RuO2 .

Chain Mail for Catalysts.

Encapsulating transition-metal nanoparticles inside carbon nanotubes (CNTs) or spheres has emerged as a novel strategy for designing highly durable nonprecious-metal catalysts. The stable carbon layer protects the inner metal core from the destructive reaction environment and thus is described as chain mail for catalysts. Electron transfer from the active metal core to the carbon layer stimulates unique catalytic activity on the carbon surface, which has been utilized extensively in a variety of catalytic reaction systems. Here, we elaborate the underlying working principle of chain mail for catalysts as well as the key factors that determine their catalytic properties, and provide insights into the physicochemical nature of such catalyst architectures for further application of the strategy in rational catalyst design.

Tuning the activities of cuprous oxide nanostructures via the oxide-metal interaction.

Despite tremendous importance in catalysis, the design of oxide-metal interface has been hampered by the limited understanding of the nature of interfacial sites and the oxide-metal interaction (OMI). Through construction of well-defined Cu2O/Pt, Cu2O/Ag and Cu2O/Au interfaces, we find that Cu2O nanostructures (NSs) on Pt exhibit much lower thermal stability than on Ag and Au, although they show the same structure. The activities of these interfaces are compared for CO oxidation and follow the order of Cu2O/Pt > Cu2O/Au > Cu2O/Ag. OMI is found to determine the activity and stability of supported Cu2O NSs, which could be described by the formation energy of interfacial oxygen vacancy. Further, electronic interaction between Cu+ and metal substrates is found center to OMI, where the d band center could be used as a key descriptor. Our study provides insight for OMI and for the development of Cu-based catalysts for low temperature oxidation reactions.

Distance Synergy of MoS2 -Confined Rhodium Atoms for Highly Efficient Hydrogen Evolution.

Perturbing the electronic structure of the MoS2 basal plane by confining heteroatoms offers the opportunity to trigger in-plane activity for the hydrogen evolution reaction (HER). The key challenge consists of inducing the optimum HER activity by controlling the type and distribution of confined atoms. A distance synergy of MoS2 -confined single-atom rhodium is presented, leading to an ultra-high HER activity at the in-plane S sites adjacent to the rhodium. By optimizing the distance between the confined Rh atoms, an ultra-low overpotential of 67 mV is achieved at a current density of 10 mA cm-2 in acidic solution. Experiments and first-principles calculations demonstrate a unique distance synergy between the confined rhodium atoms in tuning the reactivity of neighboring in-plane S atoms, which presents a volcanic trend with the inter-rhodium distance. This study provides a new strategy to tailor the activity of MoS2 surface via modulating the distance between confined single atoms.

Direct Electrochemical Ammonia Synthesis from Nitric Oxide.

NO removal from exhausted gas is necessary owing to its damage to environment. Meanwhile, the electrochemical ammonia synthesis (EAS) from N2 suffers from low reaction rate and Faradaic efficiency (FE). Now, an alternative route for ammonia synthesis is proposed from exhaust NO via electrocatalysis. DFT calculations indicate electrochemical NO reduction (NORR) is more active than N2 reduction (NRR). Via a descriptor-based approach, Cu was screened out to be the most active transition metal catalyst for NORR to NH3 owing to its moderate reactivity. Kinetic barrier calculations reveal NH3 is the most preferred product relative to H2 , N2 O, and N2 on Cu. Experimentally, a record-high EAS rate of 517.1 µmol cm-2 h-1 and FE of 93.5 % were achieved at -0.9 V vs. RHE using a Cu foam electrode, exhibiting stable electrocatalytic performances with a 100 h run. This work provides an alternative strategy to EAS from exhaust NO, coupled with NO removal.

Direct transformation of dinitrogen: synthesis of N-containing organic compounds via N-C bond formation.

N-containing organic compounds are of vital importance to lives. Practical synthesis of valuable N-containing organic compounds directly from dinitrogen (N2), not through ammonia (NH3), is a holy-grail in chemistry and chemical industry. An essential step for this transformation is the functionalization of the activated N2 units/ligands to generate N-C bonds. Pioneering works of transition metal-mediated direct conversion of N2 into organic compounds via N-C bond formation at metal-dinitrogen [N2-M] complexes have generated diversified coordination modes and laid the foundation of understanding for the N-C bond formation mechanism. This review summarizes those major achievements and is organized by the coordination modes of the [N2-M] complexes (end-on, side-on, end-on-side-on, etc.) that are involved in the N-C bond formation steps, and each part is arranged in terms of reaction types (N-alkylation, N-acylation, cycloaddition, insertion, etc.) between [N2-M] complexes and carbon-based substrates. Additionally, earlier works on one-pot synthesis of organic compounds from N2 via ill-defined intermediates are also briefed. Although almost all of the syntheses of N-containing organic compounds via direct transformation of N2 so far in the literature are realized in homogeneous stoichiometric thermochemical reaction systems and are discussed here in detail, the sporadically reported syntheses involving photochemical, electrochemical, heterogeneous thermo-catalytic reactions, if any, are also mentioned. This review aims to provide readers with an in-depth understanding of the state-of-the-art and perspectives of future research particularly in direct catalytic and efficient conversion of N2 into N-containing organic compounds under mild conditions, and to stimulate more research efforts to tackle this long-standing and grand scientific challenge.