Fabrication of Heterostructural FeNi3-Loaded Perovskite Catalysts by Rapid Plasma for Highly Efficient Photothermal Reverse Water Gas Shift Reaction.

Metal-semiconductor heterostructured catalysts have attracted great attention because of their unique interfacial characteristics and superior catalytic performance. Exsolution of nanoparticles is one of the effective and simple ways for in-situ growth of metal nanoparticles embedded in oxide surfaces and their favorable dispersion and stability. However, both high-temperature and a reducing atmosphere are required simultaneously in conventional exsolution, which is time-consuming and costly, and particles often agglomerate during the process. In this work, Ca0.9Ti0.8Ni0.1Fe0.1O3-δ (CTNF) is exposed to dielectric blocking discharge (DBD) plasma at room temperature to fabricate alloying FeNi3 nanoparticles from CTNF perovskite. FeNi3-CTNF has outstanding catalytic activity for photothermal reverse water gas shift reaction (RWGS). At 350 °C under full-spectrum irradiation, the carbon monoxide (CO) yield of FeNi3-CTNF (10.78 mmol g-1 h-1) is 11 times that of pure CaTiO3(CTO), and the CO selectivity is 98.9%. This superior catalytic activity is attributed to the narrow band gap, photogenerated electron migration to alloy particles, and abundant surface oxygen vacancies. The carbene pathway reaction is also investigated through in-situ Raman spectroscopy. The present work presents a straightforward method for the exsolution of nanoalloys in metal-semiconductor heterostructures for photothermal CO2 reduction.

A Serine Protease Inhibitor, Camostat Mesilate, Suppresses Urinary Plasmin Activity and Alleviates Hypertension and Podocyte Injury in Dahl Salt-Sensitive Rats.

In proteinuric renal diseases, the serine protease (SP) plasmin activates the epithelial sodium channel (ENaC) by cleaving its γ subunit. We previously demonstrated that a high-salt (HS) diet provoked hypertension and proteinuria in Dahl salt-sensitive (DS) rats, accompanied by γENaC activation, which were attenuated by camostat mesilate (CM), an SP inhibitor. However, the effects of CM on plasmin activity in DS rats remain unclear. In this study, we investigated the effects of CM on plasmin activity, ENaC activation, and podocyte injury in DS rats. The DS rats were divided into the control diet, HS diet (8.0% NaCl), and HS+CM diet (0.1% CM) groups. After weekly blood pressure measurement and 24-h urine collection, the rats were sacrificed at 5 weeks. The HS group exhibited hypertension, massive proteinuria, increased urinary plasmin, and γENaC activation; CM treatment suppressed these changes. CM prevented plasmin(ogen) attachment to podocytes and mitigated podocyte injury by reducing the number of apoptotic glomerular cells, inhibiting protease-activated receptor-1 activation, and suppressing inflammatory and fibrotic cytokine expression. Our findings highlight the detrimental role of urinary plasmin in the pathogenesis of salt-sensitive hypertension and glomerular injury. Targeting plasmin with SP inhibitors, such as CM, may be a promising therapeutic approach for these conditions.

Interfacial electron transfer in heterojunction nanofibers for highly efficient oxygen evolution reaction.

Efficient catalysts for the oxygen evolution reaction (OER) are critical to the progress of electrochemical devices for clean energy conversion and storage. Although heterogeneous electrocatalysts have superior activity, it is a great challenge to elucidate electron transfer at surface catalytic sites and intrinsic mechanisms. Herein, we demonstrate a new type of heterostructure electrocatalyst in which Sr0.9Ce0.05Fe0.95Ru0.05O3 fibers are hybridized with in situ grown RuO2 nanoparticles (SCFR-RuO2). We investigate its unique structure, electron transfer mechanisms related to the highly OER activity by combining experimental and theoretical calculations. Remarkably, SCFR-RuO2 shows an optimized OER overpotential of 295 mV at 10 mA cm-2. The promoted electron transfer and OER kinetics are ascribed to the coupling of electronic effects at the SCFR-RuO2 heterostructure. A strong triangular relationship among overpotential-Tafel slope-work function is proposed to be a potential descriptor of OER activity in SCFR-RuO2. These insights provide guidelines for tuning the OER performance via modified work functions in perovskite electrocatalysts.

The serine protease plasmin plays detrimental roles in epithelial sodium channel activation and podocyte injury in Dahl salt-sensitive rats.

Salt-sensitive hypertension is associated with poor clinical outcomes. The epithelial sodium channel (ENaC) in the kidney plays pivotal roles in sodium reabsorption and blood pressure regulation, in which its γ subunit is activated by extracellular serine proteases. In proteinuric nephropathies, plasmin filtered through injured glomeruli reportedly activates γENaC in the distal nephron and causes podocyte injury. We previously reported that Dahl salt-sensitive (DS) rats fed a high-salt (HS) diet developed hypertension and proteinuria along with γENaC activation and that a synthetic serine protease inhibitor, camostat mesilate, mitigated these changes. However, the role of plasmin in DS rats remained unclear. In this study, we evaluated the relationship between plasmin and hypertension as well as podocyte injury and the effects of plasmin inhibitors in DS rats. Five-week-old DS rats were divided into normal-salt diet, HS diet, and HS+plasmin inhibitor (either tranexamic acid [TA] or synthetic plasmin inhibitor YO-2) groups. After blood pressure measurement and 24 h urine collection over 5 weeks, rats were sacrificed for biochemical analyses. The HS group displayed severe hypertension and proteinuria together with activation of plasmin in urine and γENaC in the kidney, which was significantly attenuated by YO-2 but not TA. YO-2 inhibited the attachment of plasmin(ogen) to podocytes and alleviated podocyte injury by inhibiting apoptosis and inflammatory/profibrotic cytokines. YO-2 also suppressed upregulation of protease-activated receptor-1 and phosphorylated ERK1/2. These results indicate an important role of plasmin in the development of salt-sensitive hypertension and related podocyte injury, suggesting plasmin inhibition as a potential therapeutic strategy.

Camostat mesilate, a serine protease inhibitor, exerts aquaretic effects and decreases urinary exosomal AQP2 levels.

Serine proteases (SPs) play physiological roles in the kidney. We previously reported that a synthetic SP inhibitor, camostat mesilate (CM), suppressed sodium reabsorption in the renal tubule and showed natriuretic effects in aldosterone-infused rats. Here, we aimed to explore novel physiological roles of SPs in the renal tubule and understand the mechanism of actions of SP inhibitors, by administering CM to healthy rats. Sprague-Dawley rats were classified into control and CM (subcutaneous sustained-release pellet) groups and sacrificed on day 7. CM significantly increased urine volumes by approximately two-fold in a urinary sodium- and osmolyte excretion-independent manner, indicating the occurrence of free water excretion. Serum vasopressin, potassium, and calcium levels and the osmolality in the renal medulla, which all affect free water reabsorption in the renal tubule, remained unchanged after CM administration. CM decreased urinary exosomal AQP2 excretion, suggesting suppression of AQP2 activity in the collecting duct. These changes were reversed by desmopressin infusion. Water diuresis caused by CM was independent of its action on prostasin or TMPRSS4. Our results revealed the association of SP inhibition with free water handling and demonstrated that CM administration exerted diuretic effects with AQP2 downregulation, suggesting SP inhibitors as a new class of aquaretic drugs.

Low-Cost In Vivo Full-Range Optical Coherence Tomography Using a Voice Coil Motor.

In this work, we demonstrated a novel and low-cost full-range optical coherence tomography (FROCT) method. In comparison with the off-pivot approach, which needs precise control of the deflecting distance and should be adjusted for different situations, our proposed method is more flexible without regulating the system itself. Different from the previous systems reported in the literature, which used a high-cost piezo-driven stage to introduce the phase modulation, our system utilizes a cost-effective voice coil motor for retrieving the complex-valued spectral signal. The complex-valued data, with a twofold increase in the accessible depth range, can be calculated using an algorithm based on the Hilbert transform and Dirac delta function. To confirm the effectivity of our method, both simulation and experiments were performed. In particular, for the in vivo experiment, we presented the FROCT result of a fingernail fold, demonstrating the availability of in vivo imaging. Since the key element of our system is a low-cost voice coil motor, which is flexible and more accessible for most of the clinics, we believe that it has great potential to be a clinical modality in the future.

Salt-Sensitive Hypertension of the Renal Tubular Cell-Specific NFAT5 (Nuclear Factor of Activated T-Cells 5) Knockout Mice.

[Figure: see text].

A serine protease inhibitor camostat mesilate prevents podocyte apoptosis and attenuates podocyte injury in metabolic syndrome model rats.

Metabolic syndrome (MetS) is associated with chronic kidney disease and proteinuria. Previously, we reported that a synthetic serine protease inhibitor, camostat mesilate (CM), mitigated hypertension and proteinuria in rodent disease models. The present study evaluated the anti-hypertensive and anti-proteinuric effects of CM in MetS model rats (SHR/ND mcr-cp). Rats were divided into normal salt-fed (NS), high salt-fed (HS), HS and CM-treated (CM), and HS and hydralazine-treated (Hyd) groups. Rats were sacrificed after four weeks of treatment. Severe hypertension and proteinuria were observed in the HS group. Although CM and Hyd equally alleviated hypertension, CM suppressed proteinuria and glomerular sclerosis more efficiently than Hyd. The HS group revealed a decrease in podocyte number and podocyte-specific molecules, together with an increase in glomerular apoptotic cells and apoptosis-related proteins in the kidney. These changes were significantly attenuated by CM, but not by Hyd. Furthermore, CM ameliorated the apoptotic signals in murine cultured podocytes stimulated with the high glucose and aldosterone medium. In conclusion, CM could exert renoprotective effects in MetS model rats, together with the inhibition of podocyte apoptosis. Our study suggests that serine protease inhibition may become a new therapeutic strategy against MetS-related hypertension and renal injuries.

Surface and thickness measurement of transparent thin-film layers utilizing modulation-based structured-illumination microscopy.

In this research, an approach called modulation-based structured-illumination microscopy (MSIM) is proposed to measure the surface and thickness profile of thin film layers. With this method, a sinusoidal fringe pattern generated by digital micro-mirror devices (DMD) is projected on the sample. The modulation estimation of the reflected patterns is implemented for characterizing the surface and thickness profile of the sample. The measurement system is relatively simple and only an ordinary objective is enough to achieve imaging of the sample. In addition, the reflected signals come from the back surface of the film create less disturbance to the front surface compared with white-light interferometry. Consequently, they can be easily distinguished and achieve a successful measurement precisely. Both simulation and experiments are carried out to demonstrate the availability of this MISM method. The results are in excellent agreement with commercial stage profiler and the relative uncertainty is less than 10 nm.

Characterization of micro structure through hybrid interference and phase determination in broadband light interferometry.

Broadband light interferometry, which is a well-developed method for surface profiling, has been applied with great success in the past years. Conventional multi-wavelength interferometric surface profilers mostly utilize the light irradiance to locate the zero fringe order, but the accuracy and stability can be negatively influenced by intensity fluctuations and external light disturbance, which is a serious problem. In this paper we discuss a hybrid technique combining light intensity and spectral modulation to determine zero optical path difference in which the light instability can be effectively suppressed. Additionally, the phase evaluation at each pixel will provide a high vertical resolution to obtain the characterization of the micro structure. The hybrid-interference method will not only improve the sensitivity of the measurement system but also level up the robustness and stability. Both simulation and experiment on a micro-dome structure have been presented to verify the effectiveness. Furthermore, the proposed method may be promising to replace the previously intensity-based method, especially in a complex application environment.

Fabrication of Micro-Optics Elements with Arbitrary Surface Profiles Based on One-Step Maskless Grayscale Lithography.

A maskless lithography method to realize the rapid and cost-effective fabrication of micro-optics elements with arbitrary surface profiles is reported. A digital micro-mirror device (DMD) is applied to flexibly modulate that the exposure dose according to the surface profile of the structure to be fabricated. Due to the fact that not only the relationship between the grayscale levels of the DMD and the exposure dose on the surface of the photoresist, but also the dependence of the exposure depth on the exposure dose, deviate from a linear relationship arising from the DMD and photoresist, respectively, and cannot be systemically eliminated, complicated fabrication art and large fabrication error will results. A method of compensating the two nonlinear effects is proposed that can be used to accurately design the digital grayscale mask and ensure a precise control of the surface profile of the structure to be fabricated. To testify to the reliability of this approach, several typical array elements with a spherical surface, aspherical surface, and conic surface have been fabricated and tested. The root-mean-square (RMS) between the test and design value of the surface height is about 0.1 µm. The proposed method of compensating the nonlinear effect in maskless lithography can be directly used to control the grayscale levels of the DMD for fabricating the structure with an arbitrary surface profile.