Metal-organic framework derived heterostructured phosphide bifunctional electrocatalyst for efficient overall water splitting.

Developing high active and stable cost-effective bifunctional electrocatalysts for overall water splitting to produce hydrogen is of vital significance in clean and sustainable energy development. This work has prepared a novel porous unreported MOF (Ni-DPT) as a precursor to successfully synthesize a non-noble bifunctional NiCoP/Ni12P5@NF electrocatalyst through doping strategy and interface engineering. This catalyst is constructed by layered self-supporting arrays with heterojunction interface and rich nitrogen-phosphorus doping. Structural characterizations and the density function theory (DFT) calculations confirm that the interface effect of NiCoP/Ni12P5 heterojunction can regulate the electronic structure of the catalyst to optimize the Gibbs free energy of hydrogen (ΔGH*); simultaneously, the defect-rich layered nanoarrays can expose more active sites, shorten mass transfer distance, and generate a self-supporting structure for in-situ reinforcing the structural stability. As a result, this NiCoP/Ni12P5@NF catalyst exhibits favorable electrocatalytic performance, which simply needs overpotentials of 100 mV for HER and 310 mV for OER, respectively, at a current density of 10 mA·cm-2. The anion exchange membrane electrolyzer assembled with this NiCoP/Ni12P5@NF as both anode and cathode catalysts can operate stably for 200 h at a current density of 100 mA·cm-2 with an insignificant voltage decrease. This work may provide some inspiration for the further rational design of inexpensive non-noble multifunctional electrocatalysts and electrode materials for water splitting to generate hydrogen.

Analysis of spike and accessory 3c genes mutations of less virulent and FIP-associated feline coronaviruses in Beijing, China.

Mutations in S and 3c genes of feline coronavirus (FCoV) have been associated with the development of feline infectious peritonitis (FIP). In the present study, FCoV S and 3c genes mutations were analyzed in healthy and FIP cats. M1058L mutation was found in 13.64% (3/22) feces from FIP cats, but not in feces from healthy cats (0/39). The intact 3c gene was found in feces from both healthy cats (19/19) and FIP cats (12/12). All parenteral samples from FIP cats carried one or more of the M1058L mutation, S1060A mutation and mutated 3c gene. FCoV reverse-transcriptase polymerase chain reaction (RT-PCR) of parenteral samples (including ascites, pleural effusions and tissue) is recommended as the gold standard for clinical diagnosis of FIP rather than detection of the M1058L mutation, but when cats have severe gastrointestinal symptoms and lesions, detection of the M1058L mutation in feces may be helpful in diagnosing FIP.

Metal-organic framework derived FeNi alloy nanoparticles embedded in N-doped porous carbon as high-performance bifunctional air-cathode catalysts for rechargeable zinc-air battery.

Developing efficient and durable bifunctional air-cathode catalysts for both oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) is one of the key efforts promoting the practical rechargeable zinc-air batteries (ZABs). In this paper, high-performance bifunctional air-cathode catalysts by a two-step strategy: atomically dispersed Ni on N-doped carbon is first derived from MOF to form uniformly dispersed NiNC, which are pyrolyzed together with Fe source at different high-temperatures to form FeNi@NC-T (T = 800, 900, and 1000 °C) catalysts. The as-synthesized non-noble metal FeNi@NC-900 catalyst exhibits a considerably small potential gap (ΔE) of 0.72 V between ORR and OER, which is as the same as commercial noble metal Pt/C + Ir black mixed catalyst. The performance of the ZABs using FeNi@NC-900 as the air-cathode catalyst displays a power density of 119 mW·cm-2 and a specific capacity of 830.1 mAh·g-1, which is superior to that of Pt/C + Ir black mixed catalyst. This work provides a guideline for designing alloy electrocatalysts with uniform size and nanoparticle distribution for metal-air batteries with bifunctional air-cathodes.

Covalent Cross-Linking of Metal-Organic Cages: Formation of an Amorphous Cationic Porous Extended Framework for the Uptake of Oxo-Anions from Water.

Invited for this month's cover are the collaborating groups of Sheng-Run Zheng and Wei-Guang Zhang from South China Normal University, China. The cover picture shows an amorphous cationic porous metal-organic material that constructed from the covalent linking of large cationic metal-organic cage for the removal of toxic oxo-anions from water with high capacities and rapid kinetics. Read the full text of the article at 10.1002/cplu.202000570.

Covalent Cross-Linking of Metal-Organic Cages: Formation of an Amorphous Cationic Porous Extended Framework for the Uptake of Oxo-Anions from Water.

Cationic amorphous metal-organic cage (MOC)-based materials capable of removing anionic pollutants from water are receiving increasing attention but they are still relatively less reported. Herein, for the first time, a cationic porous MOC-based extended framework, namely, CL-aMOC-1, was constructed by covalent linking of a cationic Pd12 L24 (L=3,5-di-pyridin-4-yl-benzaldehyde) cage with a 1,4-bis(4-aminophenyl)benzene (BAPB) linker. Interestingly, the reaction could be completed within 15 min using an amorphous MOC-based solid (aMOC-1) and BAPB as reactant via a low-temperature solid-state reaction. The CL-aMOC-1 showed improved stability, lower solubility and higher oxo-anion uptake in water compared with the original aMOC-1. The adsorption capacities for CrO4 2- , Cr2 O7 2- and ReO4 - on CL-aMOC-1 were 245.1, 311.5 and 452.5 mg/g, respectively, in which the uptake of Cr(VI)-containing oxo-anions was among the highest compared with those of other metal-organic materials. The CL-aMOC-1 can selectively capture oxo-anions in the presence of competitive anions. It exhibits good reusability as over 85 % of the uptake capacity is retained after 5 cycles. Finally, it shows the ability to remove Cr(VI) ions from electroplating wastewater.

Pretilachlor Releasable Polyurea Microcapsules Suspension Optimization and Its Paddy Field Weeding Investigation.

In this study, pretilachlor was encapsulated into polyurea microcapsules prepared by water-initiated polymerization of polyaryl polymethylene isocyanate and eventually made into pretilachlor microcapsules suspension (PMS). We used response surface methodology (RSM) combined with the Box-Behnken design (BBD) model to optimize the formulation of PMS. The encapsulation efficiency (EE) of PMS was investigated with respect to three independent variables including wall material dosage (X1), emulsifier dosage (X2), and polymerization stirring speed (X3). The results showed that the regression equation model had a satisfactory accuracy in predicting the EE of PMS. To achieve an optimal condition for PMS preparation, the dose of wall material was set to 5%, the dose of emulsifier was set to 3.5% and the polymerization stirring speed was set to 200 rpm. The EE of PMS was up to 95.68% under the optimized condition, and the spherical shape with smooth surface morphology was observed. PMS was also proven to have delayed release capability and in vivo herbicidal activity against barnyard grass [Echinochloa crusgalli (L.) Beauv.] with an LC50 value of 274 mg/L. Furthermore, PMS had efficient weed management compared to commercially available 30% pretilachlor emulsifier (PE), showing a promising potential application for weeding paddy fields.

A Mn(II)-MOF with inherent missing metal-ion defects based on an imidazole-tetrazole tripodal ligand and its application in supercapacitors.

A metal-organic framework (MOF), namely SCNU-Z3, based on an imidazole-tetrazole tripodal ligand and Mn(ii), has been constructed. It exhibits a porous 3D framework composed of truncated octahedron cage subunits. Unexpected ligand-induced missing metal-ion defects were observed in the framework. In addition, the application of SCNU-Z3 in a supercapacitor was performed.

An Anionic Nanotubular Metal-Organic Framework for High-Capacity Dye Adsorption and Dye Degradation in Darkness.

A metal-organic framework (MOF), named SCNU-Z2, based on a new heterotopic tripodal nitrogen-containing ligand, has been constructed. Due to the replacement of one imidazole group in the reported ligand with one tetrazole group, the charge of the framework is changed from cationic to anionic but retains the same framework structure. The framework consists of tubular channels with a diameter of 1.5 nm and exhibits satisfactory stability in water with a pH range of 3-11. The anionic nature of the framework allows the effective adsorption of the cationic dyes MLB, CV, and RhB with capacities of 455.6, 847.4, and 751.8 mg/g, respectively. Among them, the adsorption capacities for SCNU-Z2 on CV and RhB rank as the highest when compared with other reported MOFs. In contrast, SCNU-Z2 exhibits an extremely low capacity for anionic dyes MO and AO, making it useful for the separation of anionic and cationic dyes based on a charge-dependent mode. Interestingly, SCNU-Z2 can be used to degrade an anionic dye, MB, within 30 min under darkness at room temperature. The apparent activation energy of the dye degradation reaction is calculated to be approximately 18.96 kJ·mol-1, implying that the catalytic reaction of MB can be considered as a low-temperature thermocatalytic reaction in the dark/SCNU-Z2 system.

Homochiral Cu(I) Coordination Polymers Based on a Double-Stranded Helical Building Block from Achiral Ligands: Symmetry-Breaking Crystallization, Photophysical and Photocatalytic Properties.

A pair of homochiral coordination polymers, [Cu(DPT)]n (1M and 1P, HDPT = 3,5-di-4-pyridinyl-2H-tetrazole), were assembled from achiral precursors. Crystal structure analysis showed that they are chiral three-dimensional (3D) coordination polymers based on a new double-stranded helical building block that is composed of two different 1D helices. Interestingly, rare symmetry-breaking crystallization was observed, in which the possibility of obtaining enantio-enriched bulk product with excessive M enantiomers (1-A) was obviously higher than that for P enantiomers (1-B) as demonstrated in multiple, repeated experiments with single-crystal diffraction and vibrational circular dichroism (VCD) spectra. Moreover, compound [Cu(DPT)]n shows good chemical stability in water, with pH values ranging from 3 to 13, as well as in many common organic solvents. Photophysical properties, including thermochromic properties and two-photon excited luminescence, were studied, and the potential for applications in temperature sensing was exhibited. In addition, the photocatalytic degradation of methylene blue in water indicated that compound [Cu(DPT)]n can be used as a photocatalyst.

Hydrolytically Stable Nanotubular Cationic Metal-Organic Framework for Rapid and Efficient Removal of Toxic Oxo-Anions and Dyes from Water.

Cationic framework materials capable of removing anionic pollutants from wastewater are highly desirable but relatively rarely reported. Herein, a cationic MOF (SCNU-Z1-Cl) possessing tubular channels with diameter of 1.5 nm based on Ni(II) and a nitrogen-containing ligand has been synthesized and applied to capture hazardous anionic contaminants from water. The SCNU-Z1-Cl exhibits high BET surface area of 1636 m2/g, and shows high hydrolytically stability in pH range from 4 to 10. Owing to the large tubular channels and the uncoordinated anions in the framework, the aqueous-phase anion-exchange applications of SCNU-Z1-Cl were explored with environmentally toxic oxo-anions including CrO42-, Cr2O72-, MnO4-, and ReO4-, and organic dyes. The adsorption of oxoanions exhibits high uptake kinetics and the adsorption capacities of CrO42-, Cr2O72-, MnO4-, and ReO4- are 126, 241, 292, and 318 mg/g, respectively, which were some of the highest values in the field of MOF/COF. In additional, the selectively is high when other concurrent anions are exist. The anionic dyes with different sizes including methyl orange, acid orange A, congo red, as well as methyl blue can be adsorbed by SCNU-Z1-Cl in few minutes to about 1 h. The adsorption capacities for them are 285, 180, 585, and 262 mg/g, respectively. In contrast, the adsorption kinetics for catinionic dyes with different sizes is obviously lower and exhibit a size-selectively adsorption that only cationic dye with suitable size (rhodamine B) can be adsorbed by SCNU-Z1-Cl. Consequently, SCNU-Z1-Cl can sepearate organic dyes in three different modes: size-dependent, charge-dependent, and kinetics-dependent selective adsorption. The excellent adsorption and separation properties of SCNU-Z1-Cl is attribute to the cationic framework, large tubular channel, as well as the high positive Zeta potential.