Morphology and thermal transitions of self-assembled NIPAM-DMA copolymers in aqueous media depend on copolymer composition profile.

HYPOTHESIS: There is a lack of understanding of the interplay between the copolymer composition profile and thermal transition observed in aqueous solutions of N-isopropyl acrylamide (NIPAM) copolymers, as well as the correlation between this transition and the formation and structure of copolymer self-assemblies. EXPERIMENTS: For this purpose, we investigated the response of five copolymers with the same molar mass and chemical composition, but with different composition profile in aqueous solution against temperature. Using complementary analytical techniques, we probed structural properties at different length scales, from the molecular scale with Nuclear Magnetic Resonance (NMR) to the colloidal scale with Dynamic Light Scattering (DLS) and Small Angle Neutron Scattering (SANS). FINDINGS: NMR and SANS investigations strengthen each other and allow a clear picture of the change of copolymer solubility and related copolymer self-assembly as a function of temperature. At the molecular scale, dehydrating NIPAM units drag N,N-dimethyl acrylamide (DMA) moieties with them in a gradual collapse of the copolymer chain; this induces a morphological transition of the self-assemblies from star-like nanostructures to crew-cut micelles. Interestingly, the transition spans a temperature range which depends on the monomer distribution profile in the copolymer chain, with the asymmetric triblock copolymer specimen revealing the broadest one. We show that the broad morphological transitions associated with gradient copolymers can be mimicked and even surpassed by the use of stepwise gradient (asymmetric) copolymers, which can be more easily and reproducibly synthesized than linear gradient copolymers.

1,1'- Thiocarbonyldiimidazole Radical Copolymerization for the Preparation of Degradable Vinyl Polymers.

1,1'-Thiocarbonyldiimidazole (TCDI) readily undergoes radical copolymerization with tert-butyl acrylate (tBA), N,N-dimethylacrylamide, and styrene. 1H NMR monitoring of the comonomer reactivity revealed a notable compatibility between TCDI and comonomers, resulting in similar consumption rates when TCDI was introduced at a 10% feed ratio. Furthermore, trithiocarbonate-mediated RAFT copolymerization of TCDI with tBA gave polymers that exhibited a linear increase of molar mass (Mnth = 2-10 kg mol-1) with conversion with relatively low dispersities (1.2-1.4). Importantly, this process enabled a successful chain extension of the produced P(TCDI-co-tBA) copolymer with styrene to form a diblock copolymer. The copolymers generated through this method contain TCDI-derived diimidazolyl thioether moieties, as established through 1H NMR spectroscopy. Additionally, degradation experiments using isopropylamine, benzoyl peroxide, sodium methoxide, and bleach have provided further confirmation of the presence of degradable TCDI moieties in the vinyl copolymer backbone.

Membrane-Active Thermoresponsive Block Copolymers Containing a Diacylglycerol-Based Segment: RAFT Synthesis, Doxorubicin Encapsulation, and Evaluation of Cytotoxicity against Breast Cancer Cells.

Herein, we report the formation of drug delivery systems from original thermoresponsive block copolymers containing lipid-based segments. Two acrylate monomers derived from palmitic- or oleic-acid-based diacylglycerols (DAGs) were synthesized and polymerized by the reversible addition-fragmentation chain transfer (RAFT) method. Well-defined DAG-based polymers with targeted molar masses and narrow molar mass distributions were next used as macro-chain transfer agents (macro-CTAs) for the polymerization of N-isopropylacrylamide (NIPAAm) or N-vinylcaprolactam (NVCL). The obtained amphiphilic block copolymers were formed into polymeric nanoparticles (PNPs) with and without encapsulated doxorubicin and characterized. Their biological assessment indicated appropriate cytocompatibility with the representatives of normal cells. Furthermore, compared to the free drug, increased cytotoxicity and apoptosis or necrosis induction in breast cancer cells was documented, including a highly aggressive and invasive triple-negative MDA-MB-231 cell line.

Exploring the Limits of High-Tg Epoxy Vitrimers Produced through Resin-Transfer Molding.

Over the past few years, scientists have developed new ways to overcome the recycling issues of conventional thermosets with the introduction of associative covalent adaptable networks (i.e., vitrimers) in polymer materials. Even though various end-use vitrimers have already been reported, just a few of them have targeted high-performance industrial applications. Herein, we develop a promising high-performance epoxy vitrimer based on a commercially available resin widely used in aeronautics with the highest glass transition temperature (Tg) of 233 °C ever reported for a vitrimer. A complete study of its physicochemical properties and cure kinetics was conducted, enabling the construction of the first time-temperature-transformation (TTT) diagram reported in the literature. This diagram allows a full determination of the processing and curing parameters leading to the manufacturing of vitrimer samples by the resin-transfer molding (RTM) process. The reshapability and limits therefrom of this high-Tg vitrimer were evaluated by three successful thermoforming cycles without degradation.

Diblock versus block-random copolymer architecture effect on physical properties of Gd3+-based hybrid polyionic complexes.

HYPOTHESIS: Random insertion of vinylphosphonic acid (VPA) units into a of PEG-PAA block copolymer improves the chemical stability and properties of hybrid nanoobjects obtained from the complexation of the copolymer with metal ions. EXPERIMENTS: Block polymers based on poly(acrylic acid) (PAA) and poly(ethylene glycol) (PEG) are modified by random insertion of 0 to 100 % of phosphonic acid functions in PAA block by a RAFT polymerization process. These polymers are then used to form hybrid polyionic complexes (HPICs) by complexation with gadolinium or europium ions. The properties of the obtained assemblies are evaluated by magnetic relaxivity, fluorescence and light scattering measurements. FINDINGS: The insertion of VPA units within the PAA block increases the chemical stability of the hybrid micelles by maintaining their integrity even at low pH. This insertion also minimizes the exchange of ions between HPICs and the surrounding medium thanks to a strengthening of interactions toward lanthanide ions. When such systems are used as MRI contrast agents or luminescent probe, 50/50 AA/VPA composition appears to be a good compromise to achieve optimal relaxivity or luminescent properties while ensuring a good chemical stability.

Vanillin-Based Epoxy Vitrimers: Looking at the Cystamine Hardener from a Different Perspective.

Epoxy vitrimers encompass many advantages compared to traditional epoxy materials such as recyclability, repairability, and reprocessability. These properties are induced by the incorporation of dynamic reversible covalent bonds. Recently, the incorporation of aromatic disulfide bridges that are dynamic has expanded the development of new eco-friendly epoxy materials. Herein, we studied a bio-based aliphatic disulfide based on cystamine as a hardener with a vanillin-derived bio-sourced epoxy to prepare fully bio-based epoxy vitrimers. This article provides a comparative study between cystamine and an aromatic disulfide benchmark hardener issued from petrol resources. This work demonstrated that the presence of this aliphatic hardener has a significant influence not only on the reactivity, but most importantly on the resulting dynamic properties. An interesting yet counterintuitive accelerating effect of the dynamic exchanges was clearly demonstrated with only 2 to 20% of molar fraction of cystamine added to the aromatic disulfide formulation. A similar glass transition was obtained compared to the purely aromatic analogue, but relaxation times were decreased by an order of magnitude.

Assemblies of poly(N-vinyl-2-pyrrolidone)-based double hydrophilic block copolymers triggered by lanthanide ions: characterization and evaluation of their properties as MRI contrast agents.

Because of the formation of specific antibodies to poly(ethylene glycol) (PEG) leading to life-threatening side effects, there is an increasing need to develop alternatives to treatments and diagnostic methods based on PEGylated copolymers. Block copolymers comprising a poly(N-vinyl-2-pyrrolidone) (PVP) segment can be used for the design of such vectors without any PEG block. As an example, a poly(acrylic acid)-block-poly(N-vinyl-2-pyrrolidone) (PAA-b-PVP) copolymer with controlled composition and molar mass is synthesized by reversible addition-fragmentation chain transfer (RAFT) polymerization. Mixing this copolymer with lanthanide cations (Gd3+, Eu3+, Y3+) leads to the formation of hybrid polyion complexes with increased stability, preventing the lanthanide cytotoxicity and in vitro cell penetration. These new nanocarriers exhibit enhanced T1 MRI contrast, when intravenously administered into mice. No leaching of gadolinium ions is detected from such hybrid complexes.

Tailor-Made Poly(vinylamine) via Purple LED-Activated RAFT Polymerization of N-vinylformamide.

Photo-iniferter reversible addition-fragmentation chain transfer (PI-RAFT) polymerization of N-vinylformamide (NVF) is demonstrated by using purple light. PNVFs with predetermined molar masses and narrow molar mass distributions are obtained. High RAFT chain-end fidelity is confirmed by matrix-assisted laser desorption ionization time-of-flight (MALDI-TOF) and electrospray-ionization time-of-flight mass spectrometry (ESI-TOF-MS), and chain extension experiment. To demonstrate the potential of this approach, an original poly(N-vinylpyrrolidone)-b-poly(N-vinylformamide) (PVP-b-PNVF) diblock copolymer is synthesized and characterized by aqueous size-exclusion chromatography (SEC), asymmetric flow field-flow fractionation (A4F), and 1 H diffusion-ordered spectroscopy nuclear magnetic resonance (1 H DOSY NMR). Finally, selective hydrolysis of PNVF block to corresponding pH-responsive poly(N-vinylpyrrolidone)-b-poly(N-vinylformamide) (PVP-b-PVAm) is performed.

Assembly of Poly(vinylphosphonic acid)-Based Double Hydrophilic Block Copolymers by Gadolinium Ions for the Formation of Highly Stable MRI Contrast Agents.

Mixing double-hydrophilic block copolymers containing a poly(vinylphosphonic acid) block with gadolinium ions in water leads to the spontaneous formation of polymeric nanoparticles. With an average diameter near 20 nm, the nanoparticles are stable after dilution or change of pH and ionic strength. High magnetic relaxivities were measured in vitro, and in vivo magnetic resonance imaging on rats demonstrates the high potential of such polymeric assemblies.

Versatile thiolactone-based conjugation strategies to polymer stabilizers for multifunctional upconverting nanoparticles aqueous dispersions.

We describe here a new methodology for the synthesis of well-defined phosphonic acid-terminated poly(ethylene glycol) (PEG) and RAFT-derived poly(N-vinylpyrrolidone) (PVP) and poly(N-vinylcaprolactam) (PVCL) by amine-thiol-ene and amine-thiol-thiosulfonate conjugation strategies using a phosphonated thiolactone and their use to prepare stable, water-dispersible multifunctional upconverting luminescent nanohybrids.

Azo-Derived Symmetrical Trithiocarbonate for Unprecedented RAFT Control.

Bis(2-cyanopropan-2-yl)trithiocarbonate (TTC-bCP) is a new symmetrical trithiocarbonate with the best leaving group ever reported for reversible addition-fragmentation chain transfer (RAFT) polymerization. We propose an elegant route to obtain TTC-bCP starting from 2,2'-azobis(2-methylpropionitrile) (AIBN) as a donor of the 2-cyanopropan-2-yl group. TTC-bCP allowed the preparation of a high-molar-mass (Mn ≈ 135 kg mol-1) methyl methacrylate-n-butyl acrylate-methyl methacrylate triblock copolymer with unprecedented control (D̵ = 1.04) in reversible-deactivation radical polymerization. Rheology measurements of this triblock copolymer showed a typical thermoplastic elastomer behavior with a steady rubbery plateau up to 120 °C.

Effect of Hydrophilic Monomer Distribution on Self-Assembly of a pH-Responsive Copolymer: Spheres, Worms and Vesicles from a Single Copolymer Composition.

A series of copolymers containing 50 mol % acrylic acid (AA) and 50 mol % butyl acrylate (BA) but with differing composition profiles ranging from an AA-BA diblock copolymer to a linear gradient poly(AA-grad-BA) copolymer were synthesized and their pH-responsive self-assembly behavior was investigated. While assemblies of the AA-BA diblock copolymer were kinetically frozen, the gradient-like compositions underwent reversible changes in size and morphology in response to changes in pH. In particular, a diblock copolymer consisting of two random copolymer segments of equal length (16 mol % and 84 mol % AA content, respectively) formed spherical micelles at pH >5, a mix of spherical and wormlike micelles at pH 5 and vesicles at pH 4. These assemblies were characterized by dynamic light scattering, cryo-transmission electron microscopy and small angle neutron scattering.

Evaluation of Cytotoxic Effect of Cholesterol End-Capped Poly(N-Isopropylacrylamide)s on Selected Normal and Neoplastic Cells.

PURPOSE: Efficient intracellular delivery of a therapeutic compound is an important feature of smart drug delivery systems (SDDS). Modification of a carrier structure with a cell-penetrating ligand, ie, cholesterol moiety, is a strategy to improve cellular uptake. Cholesterol end-capped poly(N-isopropylacrylamide)s offer a promising foundation for the design of efficient thermoresponsive drug delivery systems. METHODS: A series of cholesterol end-capped poly(N-isopropylacrylamide)s (PNIPAAm) with number-average molar masses ranging from 3200 to 11000 g·mol-1 were synthesized by reversible addition-fragmentation chain transfer (RAFT) polymerization from original xanthate-functionalized cholesterol and self-assembled into micelles. The physicochemical characteristics and cytotoxicity of cholesterol end-capped poly(N-isopropylacrylamide)s have been thoroughly investigated. RESULTS: Phase transition temperature dependence on the molecular weight and hydrophilic/hydrophobic ratio in the polymers were observed in water. Biological test results showed that the obtained materials, both in disordered and micellar form, are non-hemolytic, highly compatible with fibroblasts, and toxic to glioblastoma cells. It was found that the polymer termini dictates the mode of action of the system. CONCLUSION: The cholesteryl moiety acts as a cell-penetrating agent, which enables disruption of the plasma membrane and in effect leads to the restriction of the tumor growth. Cholesterol end-capped PNIPAAm showing in vitro anticancer efficacy can be developed not only as drug carriers but also as components of combined/synergistic therapy.

Effect of the microstructure of n-butyl acrylate/N-isopropylacrylamide copolymers on their thermo-responsiveness, self-organization and gel properties in water.

HYPOTHESIS: Polymer composition, microstructure, molar mass, architecture… critically affect the properties of thermoresponsive polymers in aqueous media. EXPERIMENTS: The behaviour of n-isopropylacrylamide and n-butyl acrylate-based copolymers of variable composition and structure (statistical, diblock or triblock) was studied in solution at different temperatures and concentrations with turbidimetry measurements, differential scanning calorimetry, electronic microscopy, rheology and scattering experiments. FINDINGS: This study illustrates how it is possible through chemical engineering of the microstructure of amphiphilic thermoresponsive polymers to modulate significantly the self-assembly, morphological and mechanical properties of these materials in aqueous media. Statistical structures induced a strong decrease of cloud point temperature compared to block structures with similar composition. Moreover, block structures lead below the transition temperature to the formation of colloidal structures. Above the transition temperature, the formation of colloidal aggregates is observed at low concentrations, and at higher concentrations the formation of gels. Neutron scattering and light scattering measurements show that for a given composition diblock structures lead to smaller colloids and mesoglobules than their triblock counterparts. Moreover, diblock structures, compared to triblock analogs, allow the formation of gels that do not demix with time (no synaeresis) but that are softer than triblock gels.

Synthesis of S-Alkyl Phosphinocarbodithioates with Switch between P(III) and P(V) Derivatives.

Simple and effective synthetic pathways are described to prepare compounds R2P(X)C(S)SCH(Me)Ph with the P atom either in the oxidation state V [R/X = t-Bu/O (6), Ph/S, (7), t-Bu/S (8), t-Bu/Se (9)] or III [R/X = Ph/BH3 (4), t-Bu/BH3 (5), t-Bu/lone pair (10)]. Compound 9 is the first example of carbodithioate ester with a P = Se group, and for the first time, a phosphinocarboditioate with a free phosphine function (compound 10) is described. Stabilization of the latter crucially depends on the steric protection by the t-Bu groups since an analogous derivative with R = Ph is observable but too unstable for isolation. Compound 10 can be reversibly protonated to yield the [t-Bu2PHC(S)SCH(Me)Ph]+ cation (10-H+), which was isolated as a BF4- salt. A few interconversion processes resulting in the facile addition/removal or exchange of the X group in this family of compounds are also described. The oxidation state of the phosphorus atom and the nature of an electron-withdrawing group have a significant impact on the spectral properties.

Asymmetric Copolymers: Synthesis, Properties, and Applications of Gradient and Other Partially Segregated Copolymers.

Asymmetric copolymers are a class of materials with intriguing properties. They can be defined by a distribution of monomers within the polymer chain that is neither strictly segregated, as in the case of block copolymers, nor evenly distributed throughout each chain, as in the case of statistical copolymers. This definition includes gradient copolymers as well as block copolymers that contain segments of statistical copolymer. In this review, different methods to synthesize asymmetric copolymers are first discussed. The properties of asymmetric copolymers are investigated in comparison to those of block and random counterparts of similar composition. Finally, some examples of applications of asymmetric copolymers, both academic and industrial, are demonstrated. The aim of this review is to provide a perspective on the design and synthesis of asymmetric copolymers with useful applications.

Quench ionic flash nano precipitation as a simple and tunable approach to decouple growth and functionalization for the one-step synthesis of functional LnPO4-based nanoparticles in water.

A novel, one-step method for the synthesis of functional, organic-inorganic hybrid nanoparticles is reported. The quench ionic Flash NanoPrecipitation (qiFNP) method enables the straightforward synthesis of nanoparticles by decoupling the formation of the inorganic core and surface functionalization. As a proof-of-concept, the qiFNP method was successfully applied for the tunable and highly controlled synthesis of various LnPO4-based nanomaterials for bioimaging applications.

Scope and Limitations of Xanthate-Mediated Synthesis of Functional γ-Thiolactones.

A modular platform based on free-radical xanthate addition to alkenes enables access to a large series of functional γ-thiolactones. This methodology includes two different pathways based on xanthate chemistry involving radical addition and Chugaev elimination steps. The first method uses the addition of an ester-functionalized xanthate to various commercially functional alkenes, whereas the second one is based on the addition of functional xanthates to an ester-functionalized alkene. In both cases, a series of xanthate/alkene monoadducts was obtained, and their thermolysis and subsequent cyclization led to a library of functional γ-thiolactones in moderate to good yield. For a few cases where it may not be possible to directly incorporate some targeted functional groups via the proposed process involving free radicals and high temperature, a bromo-functionalized thiolactone was used as a starting material for chemical transformations.

Alkyl Triarylstannanecarbodithioates: Synthesis, Crystal Structures, and Efficiency in RAFT Polymerization.

Eight alkyl triarylstannanecarbodithioates were synthesized starting from the corresponding triarylstannyl chlorides. They were fully characterized by IR and 1 H, 13 C, and 119 Sn NMR spectroscopy and mass spectrometry. Their solid-state structures and geometric parameters were determined and compared to those of other classes of thiocarbonylthio compounds. These new organotin derivatives are efficient reversible chain-transfer agents for reversible addition-fragmentation chain transfer (RAFT) polymerization of styrene (St) and n-butyl acrylate (BA), with controlled number-average molecular weights and narrow dispersities (Ð<1.3). In some cases, loss of control of the polymerization was evidenced and supported by the observation of side products by 119 Sn NMR spectroscopy. This phenomenon was attributed to the thermal instability of the Sn-RAFT terminal group.

Micellar RAFT/MADIX Polymerization.

We apply the RAFT/MADIX technique to the micellar copolymerization of acrylamide and 2-acrylamido-2-methylpropanesulfonic acid sodium salt with a hydrophobic monomer, 4-tert-butylstyrene. The resulting polymers have well-controlled molecular weight distributions. In the presence of sodium dodecyl sulfate, the polymerization is better controlled by an oligo-acrylamide chain transfer agent (PAm7-XA1) than by Rhodixan A1. The associative character of the polymer is maintained under RAFT polymerization conditions and chains can be extended to form block copolymers with associative segments.