RESUMO
Visualization of the collisional merging formation process of field-reversed configuration (FRC) has been attempted. In the collisional merging formation process, two initial FRC-like plasmoids are accelerated toward each other by a magnetic pressure gradient. The relative speed of the collision reaches several times the typical ion sonic speed and Alfvénic speed. The magnetic structure of the initial-FRCs is disrupted in the collision process, but the FRC-like magnetic structure is reformed in â¼30 µs after the collision. Magnetic reconnection should occur in this process; however, general theoretical models in magnetohydrodynamics approximation cannot be applied to this process because of the high-beta nature of FRC and super-Alfvénic/sonic relative speed. In this work, the spectroscopic observation of the collisional merging FRC formation was conducted to evaluate the timescale and geometry of merging. A slight amount of tracer element (e.g., helium) was mixed into one of two initial-FRCs. Mixing of the tracer did not cause serious adverse effects on the performance of the initial-FRC in the collision and merging processes. The collision and merging processes were visualized successfully and observed using a fast-framing camera with a bandpass filter. The timescale of merging and the outflow speed in the collisional merging process of FRCs were optically evaluated for the first time.
RESUMO
In this study, a newly developed correction method with external magnetic measurements for the magnetohydrodynamics (MHD) simulation of the collisional merging formation of a field-reversed configuration (FRC) realized the estimation of the internal structure of the FRCs without invasive internal measurements. In the collisional merging formation of FRCs, an FRC is formed via merging of two initial FRC-like plasmoids at supersonic/Alfvénic velocity. An invasive diagnostic may also interfere with the collisional merging formation process. A two-dimensional resistive MHD simulation was conducted to evaluate the global behavior and internal structure of FRCs in the collisional merging formation process without invasive measurements. This code simulated the initial formation and collisional merging processes of FRCs including discharge circuits. However, the translation velocity and the pressure of initial FRCs did not simultaneously agree with the experimental values because the magnetic pressure gradient in each formation region could not be reproduced without the artificial adjustment of the initial condition. The experimentally measured current distribution was given as the initial condition of the circuit calculation in the developed correction method. The initial FRCs were successfully translated at the translation velocity and plasma pressure in the corrected simulation, both of which were equivalent to the experiments. The properties of the merged FRCs in the experiments such as volume, total temperature, and average electron density were reproduced in the corrected simulation. The detailed radial profile of the internal magnetic field of the FRC was also measured and found to agree very well with the simulation results.
RESUMO
In TAE Technologies' current experimental device, C-2W, neutral beam injection creates a large fast ion population that sustains a field-reversed configuration (FRC) plasma. Diagnosis of these fast ions is therefore critical for understanding the behavior of the FRC. Neutral Particle Analyzers (NPAs) are used to measure the energy spectrum of fast ions that charge exchange on background or beam neutrals and are lost from the plasma. To ensure correct diagnosis of the fast ion population, a calibration check of the NPAs was performed. A novel, generally applicable method for an in situ relative calibration of diagnostics on an unknown source with a small dataset was developed. The method utilizes a machine learning technique, Generalized Additive Models (GAMs), to reconstruct the diagnostic source distribution, and Stochastic Gradient Descent (SGD) to determine the NPA channel calibration factors. The results on both synthetic and experimental datasets are presented.
RESUMO
Field-reversed configuration (FRC) Amplification via Translation-Collisional Merging (FAT-CM) experiments have recently commenced to study physics phenomena of colliding and merged FRC plasma states. Two independently formed FRCs are translated into the confinement region of the FAT-CM device, collided near the mid-plane of the device with a relative speed of up to â¼400 km/s, and a final merged FRC plasma state is achieved. To measure internal magnetic field profiles of the translated and merged FRC plasmas as well as to understand its collisional-merging process, an internal magnetic probe array, developed by TAE Technologies, has been installed in the mid-plane of the FAT-CM device. Initial magnetic field measurements indicate that both the translated and the merged FRC plasma states exhibit a clear field-reversed structure, which is qualitatively in good agreement with 2D MHD simulation. It is found and verified that a sufficient mirror field in the confinement region is required for colliding FRCs to be fully merged into a single FRC plasma state.
RESUMO
Active control of field reversed configuration (FRC) devices requires a method to determine the flux surface geometry and dynamic properties of the plasma during both transient and steady-state conditions. The current tomography (CT) method uses Bayesian inference to determine the plasma current density distribution using both the information from magnetic measurements and a physics model in the prior. Here we show that, from the inferred current sources, the FRC topology and its axial stability properties are readily obtained. When Gaussian process priors are used and the forward model is linear, the CT solution involves non-iterative matrix operations and is then ideally suited for deterministic real-time applications. Because no equilibrium assumptions are used in this case, inference of plasma topology and dynamics up to Alfvenic frequencies then becomes possible. Inference results for the C-2U device exhibit self-consistency of motions and forces during Alfvenic transients, as well as good agreement with plasma imaging diagnostics.
RESUMO
An economic magnetic fusion reactor favours a high ratio of plasma kinetic pressure to magnetic pressure in a well-confined, hot plasma with low thermal losses across the confining magnetic field. Field-reversed configuration (FRC) plasmas are potentially attractive as a reactor concept, achieving high plasma pressure in a simple axisymmetric geometry. Here, we show that FRC plasmas have unique, beneficial microstability properties that differ from typical regimes in toroidal confinement devices. Ion-scale fluctuations are found to be absent or strongly suppressed in the plasma core, mainly due to the large FRC ion orbits, resulting in near-classical thermal ion confinement. In the surrounding boundary layer plasma, ion- and electron-scale turbulence is observed once a critical pressure gradient is exceeded. The critical gradient increases in the presence of sheared plasma flow induced via electrostatic biasing, opening the prospect of active boundary and transport control in view of reactor requirements.
RESUMO
The first measurements of fast-ion D-alpha (FIDA) radiation have been acquired on C-2U, Tri Alpha Energy's advanced, beam-driven field-reversed configuration (FRC). These measurements are also forward modeled by FIDASIM. This is the first measurement and simulation of FIDA carried out on an FRC topology. FIDA measurements are made of Doppler-shifted Balmer-alpha light from neutralized fast ions using a bandpass filter and photomultiplier tube. One adjustable line-of-sight measured signals at eight locations and eight times during the FRC lifetime over 26 discharges. Filtered signals include only the highest energy ions (>6 keV) and share some salient features with the FIDASIM result. Highly Doppler-shifted beam radiation is also measured with a high-speed camera and is spatially well-correlated with FIDASIM.
RESUMO
A neutral particle bolometer (NPB) has been designed and implemented on Tri Alpha Energy's C-2 device in order to spatially and temporally resolve the charge-exchange losses of fast-ion populations originating from neutral beam injection into field-reversed configuration plasmas. This instrument employs a silicon photodiode as the detection device with an integrated tungsten filter coating to reduce sensitivity to light radiation. Here we discuss the technical aspects and calibration of the NPB, and report typical NPB measurement results of wall recycling effects on fast-ion losses.
RESUMO
A diagnostic technique for measuring the fast-ion energy distribution in a field-reversed configuration plasma was developed and tested on the C-2 experiment. A deuterium neutral beam modulated at 22 kHz is injected into the plasma, producing a localized charge-exchange target for the confined fast protons. The escaping fast neutrals are detected by a neutral particle analyzer. The target beam transverse size (â¼15 cm) defines the spatial resolution of the method. The equivalent current density of the target beam is ≤0.15 A/cm(2), which corresponds to a neutral density (â¼6 × 10(9) cm(-3)) that highly exceeds the background neutral density in the core of C-2. The deuterium fast-ions due to the target beam (E â¼27 keV), are not confined in C-2 and thus make a negligible contribution to the measured signals.
RESUMO
Field reversed configurations (FRCs) with high confinement are obtained in the C-2 device by combining plasma gun edge biasing and neutral beam injection. The plasma gun creates an inward radial electric field that counters the usual FRC spin-up. The n = 2 rotational instability is stabilized without applying quadrupole magnetic fields. The FRCs are nearly axisymmetric, which enables fast ion confinement. The plasma gun also produces E × B shear in the FRC edge layer, which may explain the observed improved particle transport. The FRC confinement times are improved by factors 2 to 4, and the plasma lifetimes are extended from 1 to up to 4 ms.
RESUMO
A hot stable field-reversed configuration (FRC) has been produced in the C-2 experiment by colliding and merging two high-ß plasmoids preformed by the dynamic version of field-reversed θ-pinch technology. The merging process exhibits the highest poloidal flux amplification obtained in a magnetic confinement system (over tenfold increase). Most of the kinetic energy is converted into thermal energy with total temperature (T{i}+T{e}) exceeding 0.5 keV. The final FRC state exhibits a record FRC lifetime with flux confinement approaching classical values. These findings should have significant implications for fusion research and the physics of magnetic reconnection.