Blinded by the light: does heat or light enhance wild mosquito (Diptera: Culicidae) attraction to CO2-baited traps in the Great Salt Lake area?

The New Jersey Light Trap has been among the earliest trap models used for mosquito surveillance in the United States. This trap was modernized in the 1950s to the miniature CDC light trap, with the addition of CO2 following soon after. The incandescent light has the tendency to attract nontarget insects, as well as losing a substantial portion of their energy as heat. Few studies have delineated whether heat or light in isolation make a difference in field collections using the former traps within the United States. Our study focused on isolating heat and light variables by using incandescent bulbs, light emitting diode (LED) bulbs, and electric heating patches affixed to a base model CO2 trap as designed at the Salt Lake City Mosquito Abatement District. Sites were selected in the urban and suburban foothills and canyons of the Wasatch Mountain front, industrial areas near the Salt Lake City International Airport, and rural wetlands in the marshes outlying the Great Salt Lake. Five traps were replicated within each sector during the summer and fall summer seasons. Collections were composed of Aedes dorsalis (Meigen), Culex pipiens L., Culex tarsalis Coquillett, and Culiseta inornata (Williston). Composition changes were a result of seasonal, rather than spatial, shifts. The results showed that LED light traps depressed collections of key species. Otherwise, there were negligible differences in collections among incandescent, heat film, and base model traps. In the Intermountain West, the miniature CDC trap is reliable enough to make programmatic decisions even if light usage varies by district.

Do it yourself: 3D-printed miniature CDC trap for adult mosquito (Diptera: Culicidae) surveillance.

The central component of mosquito and vector surveillance programs globally is the adult mosquito trap, which is intended to collect host-seeking mosquitoes. The miniature CDC trap is a widely distributed trap style in part due to its relative affordability and compact nature. Despite already being a simple trap, in-house production methods, such as 3D printing, could improve the accessibility of the CDC trap by eliminating some of the supply chain variables. We present here several trials with the Salt Lake City (SLC) trap, a three-dimensional (3D) printed trap design. Functional assessments were made on secondary components and found no statistically significant differences when comparing CO2 line height (above vs. below fan), battery types (sealed lead acid vs. USB battery pack), and trap body collection shape (funnel body vs. simple/straight body). The SLC trap was compared directly to a commercial equivalent, the ABC trap, with comparative assessment on species diversity and evenness in collections and found to be statistically equivalent on all metrics. Methods also detail an accompanying optional transport system for a pressurized CO2/regulator set-up, should a practitioner elect not to use dry ice. Our final design is presented here with the publicly published stereolithography (STL) files and a detailed outline of the transport container system. Alternative models are available for in-house manufacture of mosquito traps, and we contribute these designs in an effort to stimulate further growth in vector surveillance.

Dancing in the purple rain: color affinity and oviposition choices in Aedes sierrensis (Diptera: Culicidae).

The western tree hole mosquito, Aedes sierrensis (Ludlow) (Diptera: Clucidae), is a pestiferous mosquito with a range extending over the entire pacific seaboard and into portions of the intermountain west. As a peridomestic heartworm vector, it demands at least some level of surveillance to understand its abundance. However, the species is refractory to a majority of conventional vector surveillance approaches for tracking mosquitoes. To find more options for Aedes sierrensis surveillance, a variety of oviposition attractants were evaluated in arena-style choice assays using colony reared adults. A range of infusion treatments (e.g., alfalfa, oak, and beetroot) were examined and then combined with investigations of liquid color as well as ovicup color and entryway position. These studies revealed that Ae. sierrensis have an affinity for purple coloration, plain water, and larger entryway sizes for oviposition cups. A prototype ovicup was 3D-printed using purple filament and multiple types of entryways, and used to re-test infusion waters. No particular attraction differences were detected after normalizing for purple color. Comparisons to black 3D-printed cups yielded surprising observations that male mosquitoes also aggregated on purple cups while females sheltered, but not necessarily oviposited, in black cups. Although this was only a laboratory-based assessment, these studies provide useful information for future field trials of potential oviposition traps for surveillance of Ae. sierrensis.

Do It Yourself: A Modernized Gravid Trap Design for Mosquito Surveillance.

Gravid traps have become a common and frequently essential surveillance tool for parous Culex spp. vectors of West Nile virus and other encephalitis-causing pathogens. The recent closing of BioQuip Products Inc., an entomological supply company, has jeopardized the commercial availability of gravid traps. The Salt Lake City Mosquito Abatement District presents herein a template for making your own gravid trap, but with some modernizations for quieter fans and longer lasting, light weight, lithium battery packs. At the time of writing, the materials cost for the fan ($14 USD), toolbox ($13), cables ($9), ABS pipe ($2.50), aluminum brackets ($10), catch container with lid ($9), trap net ($10), USB battery pack ($35) and the negligible amount of 3D-printed filament ($2), is approximately half the cost (not including labor) of the formerly available commercial model. Additionally, performance validation in the laboratory (t4,9 = 0.1191, P < 0.9109) and within two field sites (χ2 = 0.107, P < 0.744) demonstrated no significant differences in collections of gravid Culex pipiens. We do not present an overhaul of the previous gravid trap blueprint, but the quality-of-life updates to the trap design, the feasibility of in-house manufacture, and the mirrored collection efficacy to the commercial model can allow improved maintenance of gravid trap surveillance networks without a commercial supplier.

Evaluation of An Aerial Application of Duet Hd® Against Aedes Dorsalis and Culex Tarsalis in Rural Habitats of the Great Salt Lake, Utah.

The Salt Lake City Mosquito Abatement District (SLCMAD) has been conducting aerial applications using an organophosphate insecticide against adult mosquitoes for several decades. In order to evaluate a potential rotation product, aerial applications of Duet HD™, a pyrethroid, were conducted under operational conditions against wild populations of Aedes dorsalis and Culex tarsalis and against colony strains of Cx. pipiens and Cx. quinquefasciatus. The erratic wind patterns of the greater Salt Lake area did not prevent sufficient droplet deposition flux at 9 monitoring locations spread across a 5,120-acre (2,072 ha) spray block within rural habitats. Three separate aerial application trials showed great efficacy against Ae. dorsalis. In contrast, Cx. tarsalis exhibited inconsistent treatment-associated mortalities, suggesting the presence of less susceptible or resistant field populations as a result of spillover from agricultural or residential pyrethroid usage. Bottle bioassays to diagnose pyrethroid resistance using field-collected Cx. tarsalis indicated that some populations of this species, especially those closest to urban edges, failed to show adequate mortality in resistance assays. Despite challenging weather conditions, Duet HD worked reasonably well against susceptible mosquito species, and it may provide a crucial role as an alternative for organophosphate applications within specific and sensitive areas. However, its area-wide adoption into control applications by the SLCMAD could be problematic due to reduced impacts on the most important arboviral vector species, Cx. tarsalis, in this area. This study demonstrates the importance of testing mosquito control products under different operational environments and against potentially resistant mosquito populations by municipal mosquito control districts.

Do it yourself: fabricating and evaluating a mosquito (Diptera: Culicidae) blood-feeding device to replace a commercial option.

Tools for rearing hematophagous insects, such as mosquitoes (Diptera: Culicidae), in an insectary are essential for research and operational evaluations in vector biology and control. There is an abundance of low-cost options for practitioners without conventional infrastructure. However, few midrange options exist that provide a balance of efficiency and low material waste. We present here a reproducible design for an electrically powered blood-feeding device that offers long-term reusability, low material waste, and customizability for different species or experiments. The limitation is the requirement for electricity, but the gain is a simple, low-skill device that can be modified as needed. To validate the design, assessments of feeding angle and blood-feeding success were compared between the Salt Lake City Mosquito Abatement District artificial membrane feeder (SLAM) and a commercial system (Hemotek). Engorgement in Aedes aegypti (80-90%), Culex pipiens (50-80%), and Culex tarsalis (30-75%) was similar between the 2 units, resulting in nearly identical fecundity outcomes between devices. Additionally, 45° angles were more successful, generally, than presenting the feeders flat or vertical to the mosquitoes (df3,48, P = 1.014 × 10-15). This angle is simple to present with the SLAM device. Materials for in-house reproduction of the SLAM system are now widely available in regions with access to e-commerce and shipped goods. This results in a device schematic that should fit well into a relatively modular, do-it-yourself paradigm where the practitioner needs only to assemble some materials without complex engineering. This article provides schematics, cost comparison, and validation of the in-house-made SLAM system.