RESUMO
This paper introduces a hands-on laboratory exercise focused on assembling and testing a hybrid soft-rigid active finger prosthetic for biomechanical and biomedical engineering (BME) education. This hands-on laboratory activity focuses on the design of a myoelectric finger prosthesis, integrating mechanical, electrical, sensor (i.e., inertial measurement units (IMUs), electromyography (EMG)), pneumatics, and embedded software concepts. We expose students to a hybrid soft-rigid robotic system, offering a flexible, modifiable lab activity that can be tailored to instructors' needs and curriculum requirements. All necessary files are made available in an open-access format for implementation. Off-the-shelf components are all purchasable through global vendors (e.g., DigiKey Electronics, McMaster-Carr, Amazon), costing approximately USD 100 per kit, largely with reusable elements. We piloted this lab with 40 undergraduate engineering students in a neural and rehabilitation engineering upper year elective course, receiving excellent positive feedback. Rooted in real-world applications, the lab is an engaging pedagogical platform, as students are eager to learn about systems with tangible impacts. Extensions to the lab, such as follow-up clinical (e.g., prosthetist) and/or technical (e.g., user-device interface design) discussion, are a natural means to deepen and promote interdisciplinary hands-on learning experiences. In conclusion, the lab session provides an engaging journey through the lifecycle of the prosthetic finger research and design process, spanning conceptualization and creation to the final assembly and testing phases.
Assuntos
Membros Artificiais , Engenharia Biomédica , Humanos , Engenharia Biomédica/educação , Extremidade Superior , Mãos , CurrículoRESUMO
This study explored effects of using isometric versus isokinetic maximal voluntary contractions (MVCs) to normalize EMG data from supraspinatus and infraspinatus subregions during isokinetic tasks. Participants performed submaximal isokinetic external rotation (ER) and scaption tasks at two speeds. Three isometric MVCs were used: seated ER; side-lying scaption; side-lying abduction. Isokinetic MVCs were performed in the same position and speeds as the experimental tasks. Data were normalized using peak EMG from reference tasks: MVC which produced the greatest amplitude overall (MEA), isometric MVC with greatest amplitude (isometric best), isokinetic MVC with greatest amplitude (isokinetic best), and the greatest amplitude from the isokinetic MVC that matched the experimental task (isokinetic matched). Mean %MVC from each experimental task/ sub-region were compared by normalization method. The isokinetic matched method versus the MEA method was significantly different in all comparisons with isokinetic matched resulting in relative normalized task values up to 162% greater. The isometric best method resulted in significantly greater %MVC 37% of the time compared to the MEA method, whereas there were no differences when using isokinetic best compared to MEA. Isokinetic MVCs are less likely to overestimate %MVC than isometric and their use should be considered when normalizing data from dynamic tasks.
Assuntos
Contração Isométrica , Manguito Rotador , Humanos , Eletromiografia/métodos , Movimento , Terapia por ExercícioRESUMO
Computational musculoskeletal modeling represents a valuable approach to examining biological systems in physical anthropology. Probabilistic modeling builds on computational musculoskeletal models by associating mathematical distributions of specific musculoskeletal features within known ranges of biological variability with functional outcomes. The purpose of this study was to determine if overlap in rotator cuff muscle force predictions would occur between species during the performance of an evolutionarily relevant horizontal bimanual arm suspension task. This necessitated creating novel probabilistic models of the human and chimpanzee glenohumeral joint through augmentation of previously published deterministic models. Glenohumeral musculoskeletal features of anthropological interest were probabilistically modeled to produce distributions of predicted human and chimpanzee rotator cuff muscle force that were representative of the specific anatomical manipulations. Musculoskeletal features modeled probabilistically included rotator cuff origins and deltoid insertion, glenoid inclination, and joint stability. Predicted human rotator cuff muscle force distributions were mostly limited to alternating between infraspinatus and teres minor, with both 100% and 0% muscle force predicted for both muscles. The chimpanzee model predicted low-to-moderate muscle force across all rotator cuff muscles. Rotator cuff muscle force predictions were most sensitive to changes of muscle origins and insertions. Results indicate that functional rotator cuff overlap is unlikely between chimpanzees and humans without greater modifications of the glenohumeral musculoskeletal phenotypes. The results also highlight the low efficacy of the human upper extremity in overhead, weight-bearing tasks, and propensity for rotator cuff injury.
Assuntos
Lesões do Manguito Rotador , Articulação do Ombro , Humanos , Animais , Manguito Rotador/fisiologia , Pan troglodytes , Articulação do Ombro/fisiologia , Escápula , Fenômenos BiomecânicosRESUMO
The gold standard exercise for recruitment of the lower trapezius is the Y prone exercise which is performed above 90° of shoulder elevation. However, clinicians often prescribe exercises that avoid high elevation postures during early stages of rehabilitation. Comparatively little data exists on relative muscle recruitment during lower arm elevation exercises. This study examined the EMG activity of four shoulder girdle muscles during four exercises accomplished below 90° of shoulder elevation and compared them to the Y prone while considering sex effects. Variance across exercises of the ratio between upper trapezius and lower trapezius was also explored. 32 healthy participants completed standardized muscle-specific MVCs and two repetitions of each exercise. The side lying external rotation and the wall slide exercises produced the highest peak EMG for the lower trapezius, both 33 and 29% lower than the Y Prone. For the upper trapezius to lower trapezius ratio, the side lying external rotation elicited the lowest value, followed by the Y prone and wall slide (53 and 59% respectively higher). Sex influenced some EMG values, typically interacting with exercise type. Thus, side lying external rotation and the wall slide are recommended for targeting the lower trapezius muscle during early rehabilitation.
Assuntos
Músculos Superficiais do Dorso , Humanos , Estudos Transversais , Músculo Esquelético/fisiologia , Eletromiografia , Braço , Ombro/fisiologia , Terapia por Exercício , Escápula/fisiologiaRESUMO
Breast cancer affects one in 8 females with a 5-year survival rate of 89%. Up to 72% of breast cancer survivors have trouble with activities of daily living (ADL) following treatment. Increased time-from-treatment improves some measures of function, yet ADL limitations persist. Therefore, this study assessed the effect of time-from-treatment on upper extremity kinematics during ADLs in breast cancer survivors. Twenty-nine female breast cancer survivors were divided into 2 groups: <1 year (n = 12) and 1-2 years (n = 17) from treatment. Kinematics were collected during 6 ADL tasks, and humerothoracic joint angles were quantified. A 2-way mixed analysis of variance assessed the effects of time-from-treatment and arm on maximum angles for each ADL. Decreased maximum angle existed for breast cancer survivors with increased time-from-treatment during all ADLs. Breast cancer survivors in the 1-2 years group used â¼28° to 32° lower elevation, â¼14° to 28° lower axial rotation, and â¼10° to 14° lower plane of elevation range across tasks. Decreased ranges of arm movement during ADLs with increased time-from-treatment may reflect compensatory movement strategies. Recognizing this shift in strategies and accompanying underlying disease progression can help inform responses to functional performance limitations in breast cancer survivors as delayed effects are present posttreatment.
Assuntos
Neoplasias da Mama , Sobreviventes de Câncer , Humanos , Feminino , Atividades Cotidianas , Fenômenos Biomecânicos , Extremidade Superior , Amplitude de Movimento ArticularRESUMO
Occupations or activities where donning head-supported mass (HSM) is commonplace put operators at an elevated risk of chronic neck pain. Yet, there is no consensus about what features of HSM influence the relative contributions to neck loads. Therefore, we tested four hypotheses that could increase neck loads: (i) HSM increases gravitational moments; (ii) more muscle activation is required to stabilize the head with HSM; (iii) the position of the HSM centre of mass (COM) induces gravitational moments; and (iv) the added moment of inertia (MOI) from HSM increases neck loads during head repositioning tasks. We performed a sensitivity analysis on the C5-C6 compression evaluated from a 24-degree freedom cervical spine model in OpenSim for static and dynamic movement trials. For static trials, we varied the magnitude of HSM, the position of its COM, and developed a novel stability constraint for static optimization. In dynamic trials, we varied HSM and the three principle MOIs. HSM magnitude and compression were linearly related to one another for both static and dynamic trials, with amplification factors varying between 1.9 and 3.9. Similar relationships were found for the COM position, although the relationship between C5-C6 peak compression and MOI in dynamic trials was generally nonlinear. This sensitivity analysis uncovered evidence in favour of hypotheses (i), (ii) and (iii). However, the model's prediction of C5-C6 compression was not overly sensitive to the magnitude of MOI. Therefore, the HSM mass properties may be more influential on neck compression than MOI properties, even during dynamic tasks.
Assuntos
Vértebras Cervicais , Pescoço , Pescoço/fisiologia , Músculos , Simulação por Computador , Fenômenos BiomecânicosRESUMO
OBJECTIVE: The aim was to review the biomechanical origins of occupational shoulder damage, while considering the complexity of shoulder mechanics and musculoskeletal consequences of diverse task demands. BACKGROUND: Accessible measures of physical exposures are the primary focus of occupational shoulder assessments and analyses. This approach has led to guidelines and intervention strategies that are often inadequate for mitigating shoulder disorders amongst the complexity of modern workplace demands. Integration of complex shoulder mechanics into occupational assessments, analyses, and interventions is critical for reducing occupational shoulder injury risk. METHOD: This narrative review describes shoulder biomechanics in the context of common injury mechanisms and consequent injuries, with a particular focus on subacromial impingement syndrome. Several modulators of shoulder injury risk are reviewed, including fatigue, overhead work, office ergonomics considerations, and pushing and pulling task configurations. RESULTS: Relationships between work requirements, muscular demands, fatigue, and biomechanical tissue loads exist. This review highlights that consideration of specific workplace factors should be integrated with our knowledge of the intricate arrangement and interpersonal variability of the shoulder complex to proactively evaluate occupational shoulder demands and exposures. CONCLUSION: A standard method for evaluating shoulder muscle exposures during workplace tasks does not exist. An integrated approach is critical for improved work design and prevention of shoulder tissue damage and accompanying disability. APPLICATION: This review is particularly relevant for researchers and practitioners, providing guidance for work design and evaluation for shoulder injury prevention by understanding the importance of the unique and complex mechanics of the shoulder.
Assuntos
Doenças Musculoesqueléticas , Doenças Profissionais , Lesões do Ombro , Humanos , Ombro/fisiologia , Extremidade Superior , Doenças Musculoesqueléticas/prevenção & controle , Doenças Profissionais/prevenção & controle , Fadiga , Fenômenos BiomecânicosRESUMO
Evaluating exoskeleton actuation methods and designing an effective controller for these exoskeletons are both challenging and time-consuming tasks. This is largely due to the complicated human-robot interactions, the selection of sensors and actuators, electrical/command connection issues, and communication delays. In this research, a test framework for evaluating a new active-passive shoulder exoskeleton was developed, and a surface electromyography (sEMG)-based human-robot cooperative control method was created to execute the wearer's movement intentions. The hierarchical control used sEMG-based intention estimation, mid-level strength regulation, and low-level actuator control. It was then applied to shoulder joint elevation experiments to verify the exoskeleton controller's effectiveness. The active-passive assistance was compared with fully passive and fully active exoskeleton control using the following criteria: (1) post-test survey, (2) load tolerance duration, and (3) computed human torque, power, and metabolic energy expenditure using sEMG signals and inverse dynamic simulation. The experimental outcomes showed that active-passive exoskeletons required less muscular activation torque (50%) from the user and reduced fatigue duration indicators by a factor of 3, compared to fully passive ones.
RESUMO
Recently, robotic exoskeletons are gaining attention for assisting industrial workers. The exoskeleton power source ranges from fully passive (FP) to fully active (FA), or a mixture of both. The objective of this experimental study was to assess the efficiency of a new active-passive (AP) shoulder exoskeleton using statistical analyses of 11 quantitative measures from surface electromyography (sEMG) and kinematic data and a user survey for weight lifting tasks. Two groups of females and males lifted heavy kettlebells, while a shoulder exoskeleton helped them in modes of fully passive (FP), fully active (FA), and active-passive (AP). The AP exoskeleton outperformed the FP and FA exoskeletons because the participants could hold the weighted object for nearly twice as long before fatigue occurred. Future developments should concentrate on developing sex-specific controllers as well as on better-fitting wearable devices for women.
Assuntos
Exoesqueleto Energizado , Masculino , Humanos , Feminino , Remoção , Extremidade Superior , Fontes de Energia Elétrica , EletromiografiaRESUMO
A proof of concept of a novel air microfluidics-enabled soft robotic sleeve to enable lymphedema treatment is presented. Compression sleeves represent the current, suboptimal standard of care, and stationary pumps assist with lymph drainage; however, effective systems that are truly wearable while performing daily activities are very scarce. This problematic trade-off between performance and wearability requires a new solution, which is addressed by an innovative microfluidic device. Its novelty lies in the use of light, small, and inexpensive air microfluidic chips (35 × 20 × 5 mm3 in size) that bring three major advantages compared to their traditional counterparts. First, each chip is designed with 16 fluidic channels with a cross-sectional area varying from 0.04 to 1 mm2, providing sequential inflation and uniform deflation capability to eight air bladders, thereby producing intentional gradient compression to the arm to facilitate lymph fluid circulation. The design is derived from the fundamentals of microfluidics, in particular, hydraulic resistance and paths of least resistance. Second, the air microfluidic chip enables miniaturization of at least eight bulky energy-consuming valves to two miniature solenoid valves for control increasing wearability. Third, the air microfluidic chip has no moving parts, which reduces the noise and energy needed. The cost, simplicity, and scale-up potential of developing methods for making the system are also detailed. The sequential inflation, uniform deflation, and pressure gradient are demonstrated, and the resulted compression and internal air bladder pressure were evaluated. This air microfluidics-enabled sleeve presents tremendous potential toward future improvements in self-care lymphedema management.
RESUMO
BACKGROUND: There is a growing number of breast cancer survivors from improved cancer treatments. However, treatments often impair upper limb function, specifically range of motion and strength, reducing quality of life and function. The primary purpose of this study was to quantify differences in strength and range of motion following treatment. The secondary purpose aimed to measure the activation of each upper limb muscle in the completion of tasks. METHODS: 29 breast cancer survivors were categorized into two groups based on time-since-treatment: 1) up to 1-year post-treatment, and 2) 1 to 2 years post-treatment. Participants completed maximal strength and range of motion tasks. During trials eight muscles were monitored bilaterally. Maximal force output was taken during strength trials, and kinematics were monitored during range of motion trials. A 2 by 2 mixed ANOVA (limb (affected, unaffected) x time-since-treatment) examined interaction and main effects of these factors on task peak force, angle and mean activation. FINDINGS: Time-since-treatment influenced strength (flexion, extension, internal and external rotation) and range of motion (flexion, scapular abduction), wherein the group further from treatment had 11.5-15.5° less range of motion and 27.7-43.6 N less force production. A main effect of time-since-treatment influenced muscular behaviours during both tasks, where activation was higher in the group 1-2 years from treatment. INTERPRETATION: Effects of treatment may manifest in a delayed manner whereby strength and range of motion are reduced in breast cancer survivors to a greater extent in those who are past 1 year of treatment cessation.
Assuntos
Neoplasias da Mama , Sobreviventes de Câncer , Articulação do Ombro , Neoplasias da Mama/terapia , Feminino , Humanos , Qualidade de Vida , Amplitude de Movimento Articular/fisiologia , Extremidade SuperiorRESUMO
INTRODUCTION: Between 43 and 97% of helicopter pilots in the Canadian Armed Forces report neck pain. Potential contributing factors include the weight of their helmet, night vision goggles (NVG), and counterweight (CW) combined with deviated neck postures. Therefore, the purpose of this investigation was to quantify changes in neck loads associated with posture, helmet, NVG, and CW.METHODS: Eight male subjects volunteered. They undertook one of five deviated neck postures (flexion, extension, lateral bending, axial rotation) times four configurations (no helmet, helmet only, helmet and NVG, and helmet, NVG, and CW). 3D kinematics and EMG from 10 muscles (5 bilaterally) drove a 3D inverse dynamics, EMG-driven model of the cervical spine which calculated joint compression and shear at C5-C6.RESULTS: The compression in the neutral posture was 116.5 (5.7) N, which increased to 143.7 (11.4) N due to a 12.7 N helmet. NVGs, weighing 7.9 N, also generated this disproportionate increase, where the compression was 164.2 (3.7) N. In flexion or extension, the compression increased with increasing head-supported mass, with a maximum of 315.8 (67.5) N with the CW in flexion. Anteroposterior shear was highest in the lateral bending [34.0 (6.2) N] condition, but was generally low (< 30 N). Mediolateral shear was less than 5 N for all conditions.DISCUSSION: Repositioning the center of gravity of the helmet with either NVGs or CW resulted in posture-specific changes to loading. Posture demonstrated a greater potential to reposition the head segment's center of gravity compared to the helmet design. Therefore, helmet designs which consider repositioning the center of gravity may reduce loads in one posture, but likely exacerbate loading in other postures.Barrett JM, McKinnon CD, Dickerson CR, Laing AC, Callaghan JP. Posture and helmet configuration effects on joint reaction loads in the middle cervical spine. Aerosp Med Hum Perform. 2022; 93(5):458-466.
Assuntos
Dispositivos de Proteção da Cabeça , Músculos do Pescoço , Fenômenos Biomecânicos , Canadá , Vértebras Cervicais , Eletromiografia , Humanos , Masculino , Músculos do Pescoço/fisiologia , Postura/fisiologiaRESUMO
BACKGROUND: Breast cancer survivors may be at risk of experiencing rotator cuff disease after treatment. Biomechanical alterations following surgery potentially predispose survivors to develop this disorder. OBJECTIVE: To examine scapular kinematics in breast cancer survivors with and without impingement pain during an overhead reach task. DESIGN: A cross-sectional study. METHODS: Three surgery groups were included: non-cancer controls, mastectomy-only survivors and post-reconstruction survivors. Breast cancer survivor groups were also categorized by the presence of impingement pain. Scapular motion was tracked during an overhead reach task, performed separately by both arms. Maximum scapular internal rotation, upward rotation and tilt were calculated. Two-way analyses of variance with interactions (p < .05) were used to test the effects of group (control, mastectomy-only, reconstruction) and impingement pain (pain, no pain) on each variable within a (left/right) side. RESULTS: Scapular kinematics varied with the group by pain interaction. On the right side, the mastectomy-pain group had reduced upward rotation, while the reconstruction-pain group had higher upward rotation (mastectomy-only: 22.9° vs. reconstruction: 31.2°). On the left side, the mastectomy-pain group had higher internal rotation, while the reconstruction-pain group had reduced internal rotation (mastectomy-only: 45.1° vs. reconstruction: 39.3°). However, time since surgery was longer in the mastectomy-pain group than reconstruction-pain group, suggesting there may be a temporal component to kinematic compensations. CONCLUSIONS: There are kinematic alterations in breast cancer survivors that may promote future development of rotator cuff disease. Compensations may begin as protective and progress to more harmful alterations with time.KEY MESSAGESScapular kinematics varied with surgery and pain interaction: upward rotation was lower and internal rotation higher in mastectomy-pain group, while upward rotation was higher and internal rotation lower in reconstruction-pain group.Kinematics alterations may also be associated with time since surgery, as the mastectomy-pain group had longer time since surgery than the reconstruction-pain group.Kinematic alterations may transition from protective to harmful over time.In-depth analyses by reconstruction type are needed to determine surgery-specific effects on kinematics and their potential impact on the development of rotator cuff disease.
Assuntos
Neoplasias da Mama , Sobreviventes de Câncer , Fenômenos Biomecânicos , Neoplasias da Mama/cirurgia , Estudos Transversais , Feminino , Humanos , Mastectomia/efeitos adversos , Dor , Amplitude de Movimento Articular , Manguito Rotador/cirurgiaRESUMO
The bench press is a common activity found in many exercise regimens. Powerlifters often adopt non-standard techniques to potentially enhance maximal capability. The purpose of this research was to examine muscle activation and joint loading differences between the powerlifting (Arch) and standardised techniques. Twenty experienced male lifters completed lifts at an instructed cadence in the arch and the National Strength and Conditioning Association standard techniques at 25%, 50% and 75% of their self-reported one rep maximum. The arch technique increased latissimus dorsi mean and peak activation (p < 0.0001), generating activation of approximately 13% maximal voluntary contraction, regardless of percentage of the one rep maximum lifted. The standardised technique resulted in integrated shoulder moments that were 8% larger (p < 0.0001). This latissimus dorsi activation paired with decreased shoulder loading in the arch technique likely acts to minimise the amount of time spent in the "sticking region", where most lift efforts fail. It is possible to use this technique to increase latissimus dorsi activation, without increasing overall shoulder loading. The technique-specific differences can be used in performance or rehabilitation-based programmes to increase muscular output of some muscles without increasing overall loading.
Assuntos
Contração Isométrica , Músculos Superficiais do Dorso , Eletromiografia/métodos , Humanos , Contração Isométrica/fisiologia , Masculino , Músculo Esquelético/fisiologia , Músculos Superficiais do Dorso/fisiologia , Extremidade Superior/fisiologia , Levantamento de Peso/fisiologiaRESUMO
Pectoralis major activation enables the performance of several upper extremity movements. Its regional activation, however, is not documented in healthy females. This work used high-density surface electromyography to investigate regional pectoralis major activation in twenty-nine healthy young females across two independent experiments in several ramp and hold isometric tasks and force levels. Regional mean root mean square amplitudes (normalized to the task-specific maxima) were quantified for the clavicular, superior, and middle sternocostal regions. Two-way ANOVAs were used to determine if differences in normalized regional activation exist within each task and force level. The middle sternocostal region activated 12-108% more than the clavicular and the superior sternocostal region in extension, adduction with external rotation, and high elevation internal rotation. In high elevation adduction, the middle sternocostal region activated more (7-22%) than the superior sternocostal region. In low elevation, internal rotation (60°), the clavicular and middle sternocostal regions activated more (9-13%) than the superior sternocostal region, while in adduction 60°, the clavicular region activated 9-19% more than the superior sternocostal region. Lastly, in forward and horizontal flexion, all three regions activated similarly irrespective of the force level, except at 25% MVF in forward flexion, where the clavicular region activated 21% more than the superior sternocostal region. This work provides a first comprehensive evaluation of the normalized regional pectoralis major activation in healthy females. The present findings indicate that the performance of isometric tasks in different directions activates different pectoralis major regions in healthy females, suggesting regional specificity to functional actions.
Assuntos
Músculos Peitorais , Articulação do Ombro , Clavícula/fisiologia , Eletromiografia , Feminino , Humanos , Músculos Peitorais/fisiologia , Ombro/fisiologia , Articulação do Ombro/fisiologiaRESUMO
INTRODUCTION: The acromion marker cluster (AMC) is a non-invasive scapular motion tracking method. However, it lacks testing in clinical populations, where unique challenges may present. This investigation resolved the utility of the AMC approach in a compromised clinical population. METHODS: The upper body of breast cancer survivors (BCS) and controls were tracked via motion capture and scapular landmarks palpated and recorded using a digitizer at static neutral to maximum elevation postures. The AMC tracked the scapula during dynamic maximum arm abduction. Both single (SC) and double calibration (DC) methods were applied to calculate scapular angles. The influences of calibration method, elevation, and group on mean and absolute error with two-way fixed ANOVAs with interactions (pâ¯<â¯0.05). Root mean square errors (RMSE) were calculated and compared. RESULTS: DC improved AMC estimation of palpated scapular orientation over SC, especially at higher arm elevations; RMSE averaged 11° higher for SC than DC at maximum elevation, but the methods were only 2.2° different at 90° elevation. DC of the AMC yielded mean error values of â¼5-10°. These approximate errors reported for AMC with young, lean adults. CONCLUSIONS: The AMC with DC is a non-invasive method with acceptable error for measuring scapular motion of BCS and age-matched controls.
Assuntos
Acrômio , Articulação do Ombro , Adulto , Fenômenos Biomecânicos , Humanos , Músculo Esquelético , Amplitude de Movimento Articular , EscápulaRESUMO
Growing evidence supports the existence of distinct anatomical sub-regions within supraspinatus and infraspinatus, but only recently has attention turned to exploring their potential functional differences. Using indwelling fine-wire electromyography, muscle activity was investigated from these sub-regions in 15 participants (mean 34â¯yr, 170â¯cm, 71.9â¯kg) during dynamic external rotation (ER), abduction, flexion, and scaption tasks with and without free weights corresponding to 50% and 75% of the participant's five repetition maximum. Electromyography data were normalized to isometric and isokinetic maximal voluntary contractions and activation ratios for each sub-region compared. Differences in mean regional activation ratios for supraspinatus and infraspinatus varied by arm posture, but were not influenced by load. Relative activation of posterior supraspinatus was greater during an ER task performed in side lying compared to an ER task performed with 90° of humeral elevation in seated and prone postures. Relative activation of superior infraspinatus was greater during an ER task in prone and side lying postures compared to flexion and scaption. Similar results were found when comparing regional muscle activation ratios for infraspinatus between tasks regardless of normalization method employed. These findings may impact exercise selection in the non-operative management of rotator cuff tears.
Assuntos
Músculo Esquelético , Manguito Rotador , Eletromiografia , Humanos , Úmero , Amplitude de Movimento ArticularRESUMO
Surface electromyography (sEMG) is commonly used to estimate muscle demands in occupational tasks. To allow for comparisons, sEMG amplitude is normalized to muscle specific maximum voluntary contractions (MVCs) performed in a standardized set of postures. However, maximal sEMG amplitude in shoulder muscles is highly dependent on arm posture and therefore, normalizing task related muscular activity to standard MVCs may lead to misinterpretation of task specific muscular demands. Therefore, the purpose of this study was to investigate differences in commonly monitored shoulder muscles using normalized sEMG amplitude between maximal exertions at different hand locations and across force exertion directions relative to standard MVCs. sEMG was recorded from the middle deltoid, pectoralis major sternal head, infraspinatus, latissimus dorsi, and upper trapezius. Participants completed standardized muscle-specific MVCs and two maximal exertions in 5 hand locations (low left, low right, high left, high right, and central) in each of the four force directions (push, pull, up, and down). Peak sEMG was analyzed in the direction(s) that elicited the highest signal for each muscle. All muscles differed by location (pâ¯<â¯0.05). Latissimus dorsi had the greatest activation during pulls (32-135% MVC); upper trapezius and middle deltoid while exerting upwards (73-103% and 42-78% MVC, respectively); infraspinatus while pushing (38-79% MVC); and pectoralis major activation was the highest during downwards exertions (48-84% MVC). Normalization of location specific maximal exertions to standard muscle specific MVCs underestimated maximal activity across 90% of the tasks in all shoulder muscles tested, except for latissimus dorsi where amplitudes were overestimated in low right hand location. Normalization of location specific muscle activity to standard muscle specific MVCs often underestimates muscle activity in task performance and is cautioned against if the goal is to accurately estimate muscle demands.
Assuntos
Ombro , Músculos Superficiais do Dorso , Eletromiografia , Feminino , Humanos , Contração Isométrica , Contração Muscular , Músculo Esquelético , PosturaRESUMO
Background. Many of the approaches available for modifying manual materials handling (MMH) exertion emphasize lower back protection but often do not consider how interventions affect other body regions. This study focused on the influence of lift training on resultant joint moments and muscular demand trade-offs between the lower back and shoulders during MMH tasks. Methods. Three recommended lifting techniques (straddle lift, pivot technique and tripod lift) were compared to a priori (untrained) self-selected lifting techniques. Results. Mean and cumulative resultant moments indicated that using the lifting techniques evaluated in this investigation protected the shoulders more than the lower back. Mean and peak shoulder muscle activity also decreased following training (p < 0.05). Although there were no peak and mean changes to lower back muscle activity (p>0.05), there was a significant decrease in cumulative lower back muscle activity (p < 0.05). Reported perceived exertion values decreased following training across the lifting techniques for all evaluated body regions (p < 0.05). Conclusion. Overall, the recommended MMH techniques protected both the lower back and the shoulders, and no exposure trade-offs between them were identified.
Assuntos
Remoção , Ombro , Dorso , Fenômenos Biomecânicos , Humanos , Músculo Esquelético , Ombro/fisiologiaRESUMO
Despite growing literature, limited research details the influence of passive upper limb exoskeletons on upper limb kinematics. Two bolting tasks and a tracing task were completed at two heights (overhead and between waist and overhead height) for four exoskeleton conditions (no exoskeleton, and 3 levels of exoskeleton assistance) by female participants. Motion capture data, ratings of perceived exertion and discomfort, and task duration were recorded. Exoskeleton condition increased minimum shoulder elevation by 35-36% (Δ10.5-10.7°) at 1.81 kg and 2.72 kg of support, mean shoulder external rotation by 316% (Δ24.6°) at 0.91 kg of support and mean forearm pronation by 30.9% (Δ14.6°) at 0.91 kg of support. Exoskeleton condition reduced ratings of perceived exertion and discomfort, but not significantly. Task duration was unaffected. Exoskeleton use at any of three different settings modestly affected some joint kinematics for the tasks examined, which may merit consideration when deciding on occupational exoskeleton implementation.