Single-Crystal P2-Na0.67Mn0.67Ni0.33O2 Cathode Material with Improved Cycling Stability for Sodium-Ion Batteries.

Layered oxides constitute one of the most promising cathode materials classes for large-scale sodium-ion batteries because of their high specific capacity, scalable synthesis, and low cost. However, their practical use is limited by their low energy density, physicochemical instability, and poor cycling stability. Aiming to mitigate these shortcomings, in this work, we synthesized polycrystalline (PC) and single-crystal (SC) P2-type Na0.67-δMn0.67Ni0.33O2 (NMNO) cathode materials through a solid-state route and evaluated their physicochemical and electrochemical performance. The SC-NMNO cathode with a large mean primary particle size (D50) of 12.7 µm was found to exhibit high cycling stability leading to 47% higher capacity retention than PC-NMNO after 175 cycles at 1C rate in the potential window 4.2-1.5 V. This could be attributed to the effective mitigation of parasitic side reactions at the electrode-electrolyte interface and suppressed intergranular cracking induced by anisotropic volume changes. This is confirmed by the lower volume variation of SC-NMNO (ΔV ∼ 1.0%) compared to PC-NMNO (ΔV ∼ 1.4%) upon charging to 4.2 V. Additionally, the SC-NMNO cathode displayed slightly higher thermal stability compared to PC-NMNO. Both cathodes exhibited good chemical stability against air and water exposure, thus enabling material storage/handling in the ambient atmosphere as well as making them suitable for aqueous processing. In this regard, PC-NMNO was investigated with two low-cost aqueous binders, carboxymethyl cellulose, and sodium trimetaphosphate, which exhibited higher binding strength and displayed excellent electrochemical performance compared to PVDF, which could potentially lead to significant cost reduction in electrode manufacturing.

Improving rechargeable magnesium batteries through dual cation co-intercalation strategy.

The development of competitive rechargeable Mg batteries is hindered by the poor mobility of divalent Mg ions in cathode host materials. In this work, we explore the dual cation co-intercalation strategy to mitigate the sluggishness of Mg2+ in model TiS2 material. The strategy involves pairing Mg2+ with Li+ or Na+ in dual-salt electrolytes in order to exploit the faster mobility of the latter with the aim to reach better electrochemical performance. A combination of experiments and theoretical calculations details the charge storage and redox mechanism of co-intercalating cationic charge carriers. Comparative evaluation reveals that the redox activity of Mg2+ can be improved significantly with the help of the dual cation co-intercalation strategy, although the ionic radius of the accompanying monovalent ion plays a critical role on the viability of the strategy. More specifically, a significantly higher Mg2+ quantity intercalates with Li+ than with Na+ in TiS2. The reason being the absence of phase transition in the former case, which enables improved Mg2+ storage. Our results highlight dual cation co-intercalation strategy as an alternative approach to improve the electrochemical performance of rechargeable Mg batteries by opening the pathway to a rich playground of advanced cathode materials for multivalent battery applications.

Anion Storage Chemistry of Organic Cathodes for High-Energy and High-Power Density Divalent Metal Batteries.

Multivalent batteries show promising prospects for next-generation sustainable energy storage applications. Herein, we report a polytriphenylamine (PTPAn) composite cathode capable of highly reversible storage of tetrakis(hexafluoroisopropyloxy) borate [B(hfip)4 ] anions in both Magnesium (Mg) and calcium (Ca) battery systems. Spectroscopic and computational studies reveal the redox reaction mechanism of the PTPAn cathode material. The Mg and Ca cells exhibit a cell voltage >3 V, a high-power density of ∼∼3000 W kg-1 and a high-energy density of ∼∼300 Wh kg-1 , respectively. Moreover, the combination of the PTPAn cathode with a calcium-tin (Ca-Sn) alloy anode could enable a long battery-life of 3000 cycles with a capacity retention of 60 %. The anion storage chemistry associated with dual-ion electrochemical concept demonstrates a new feasible pathway towards high-performance divalent ion batteries.

Polarization induced control of optical trap potentials in binary liquids.

We illustrate control of a polarized laser optical trapping potential landscape through the nonideal mixing of binary liquids. The inherent trapping potential asymmetry (ITPA) present in the trapping region results from the asymmetric intensity distribution in focal volume due to the high numerical aperture objective lens. Experimentally, we show that this ITPA effect can be modified and/or removed by the use of binary liquid mixtures. From our femtosecond optical tweezers experiments, we determine the topograph of the trapping potential base on the fluctuation-dissipation theorem. Additionally, the Brownian motion of the trapped bead is sensitive to the frictional force (FF) of the surroundings that is exerted by clusters of water and alcohol binary mixture through extended hydrogen bonding. Thus, using these two effects, ITPA and FF of the medium, we have shown that one can indeed modify the effective trapping potential landscape. Water-alcohol binary mixtures display a nonlinear dependence on the microrheological properties of the solvent composition as a result of rigid cluster formation. Volumetrically, at about 30% methanol in water binary mixture, the trapping asymmetry is minimal. In this particular binary mixture composition, the hydrophobic part of the methanol molecule is surrounded by 'cages' of water molecules. Enhanced H-bonding network of water molecules results in higher viscosity, which contributes to the higher frictional force. Increased viscosity decreases the degree of anisotropy due to hindered dipolar rotation. However, at higher methanol concentrations, the methanol molecules are no longer contained within the water cages and are free to move, which decrease their overall bulk viscosity. Thus, for pure solvents, experimentally measured anisotropy matches quite well with the theoretical prediction, but this fails in case of the binary mixtures due to the increased frictional force exerted by binary mixtures that result from the formation of cage-like structures.

Measurement of pure optical nonlinearity in carbon disulfide with a high-repetition-rate femtosecond laser.

Using the close-aperture Z-scan technique, the pure nonlinear refractive index (n2) of carbon disulfide is measured with a 76 MHz repetition rate femtosecond laser. Strong interference of thermal effects exists with high-repetition-rate lasers that result in negative values of n2. We remove the thermal effect completely by continuously increasing the sample flow rate (F) in a sample cell as indicated by the change in sign of n2 from negative to positive. The positive value of n2 is due to Kerr-type nonlinearity. At sufficiently high values of F of >25 ml/min, all thermal effects are removed, resulting in an n2 value that matches low-repetition-rate experiments.

Unusual behavior of thermal lens in alcohols.

We use a femtosecond pump-probe Z-scan technique to measure the thermal lens (TL) signal in a homologous series of primary alcohols. The trend in these experimentally measured TL signals deviates in a counterintuitive manner from the ones calculated using theoretical models that are only based on the macroscopic parameters. Introspection shows that the present TL theories are based on heat conduction for low absorbing samples without considering any convective mode of heat transfer. Our studies on highly absorbing samples indicate the importance of convective mode of heat transfer in TL studies.