RESUMO
An ultra-thin quasi-solid electrolyte (QSE) with dendrite-inhibiting properties is a requirement for achieving high energy density quasi-solid lithium metal batteries (LMBs). Here, a 5.1 µm rigid QSE layer is directly designed on the cathode, in which Kevlar (poly(p-phenylene terephthalate)) nanofibers (KANFs) with negatively charged groups bridging metal-organic framework (MOF) particles are served as a rigid skeleton, and non-flammable deep eutectic solvent is selected to be encapsulated into the MOF channels, combined with in situ polymerization to complete safe electrolyte system with high rigidness and stability. The QSE with constructed topological network demonstrates high rigidity (5.4 GPa), high ionic conductivity (0.73 mS cm-1 at room temperature), good ion-regulated properties, and improved structural stability, contributing to homogenized Li-ion flux, excellent dendrite suppression, and prolonged cyclic performance for LMB. Additionally, ion regulation influences the Li deposition behavior, exhibiting a uniform morphology on the Li-metal surface after cycling. According to density-functional theory, KANFs bridging MOFs as hosts play a vital function in the free-state and fast diffusion dynamics of Li-ions. This work provides an effective strategy for constructing ultrathin robust electrolytes with a novel ionic conduction mode.
RESUMO
Renewable photo-/electrocatalytic coreduction of CO2 and nitrate to urea is a promising method for high-value utilization of CO2 . However, because of the low yields of the urea synthesis by photo-/electrocatalysis process, the accurate quantification of low concentration urea is challenging. The traditional diacetylmonoxime-thiosemicarbazide (DAMO-TSC) method for urea detection has a high limit of quantification and accuracy, but it is easily affected by NO2 - in the solution, which limits its application scope. Thus, the DAMO-TSC method urgently requires a more rigorous design to eliminate the effects of NO2 - and accurately quantify urea in nitrate systems. Herein, a modified DAMO-TSC method is reported, which consumes NO2 - in solution through a nitrogen release reaction; hence, the remaining products do not affect the accuracy of urea detection. The results of detecting urea solutions with different NO2 - concentrations (within 30 ppm) show that the improved method can effectively control the error of urea detection within 3%.
RESUMO
Redox flow batteries have been discussed as scalable and simple stationary energy storage devices. However, currently developed systems encounter less competitive energy density and high costs, restricting their wider application. There is a lack of appropriate redox chemistry, preferably based on active materials that are abundant in nature and show high solubility in aqueous electrolytes. A nitrogen-centered redox cycle operating between the limiting species ammonia and nitrate via an eight-electron redox reaction stayed practically unnoticed, albeit its ubiquity in biological processes. Ammonia or nitrate are world-scale chemicals with high aqueous solubility, and are then comparably safe. We demonstrate here the successful implementation of such a nitrogen-based redox cycle between ammonia and nitrate with eight-electron transfer as a catholyte for Zn-based flow batteries, which continuously worked for 12.9â days with 930 charging-discharging cycles. A very competitive energy density of 577â Wh L-1 can be reached, which is well above most reported flow batteries (e.g. 8â times the standard Zn-bromide battery), demonstrating that the nitrogen cycle with eight-electron transfer can offer promising cathodic redox chemistry for safe, affordable, and scalable high-energy-density storage devices.
RESUMO
Electrocatalytic N2 reduction reaction (NRR) is recognized as a zero-carbon emission method for NH3 synthesis. However, to date, this technology still suffers from low yield and low selectivity associated with the catalyst. Herein, inspired by the activation of N2 by lithium metal, a highly reactive defective black phosphorene (D-BPene ) is proposed as a lithium-like catalyst for boosting electrochemical N2 activation. Correspondingly, we also report a strategy for producing environmentally stable D-BPene by simultaneously constructing defects and fluorination protection based on topochemical reactions. Reliable performance evaluations show that the fluorine-stabilized D-BPene can induce a high NH3 yield rate of ≈70â µg h-1 mgcat. -1 and a high Faradaic efficiency of ≈26 % at -0.5â V vs. RHE in an aqueous electrolyte. This work not only exemplifies the first stable preparation and practical application of D-BPene , but also brings a new design idea for NRR catalysts.
RESUMO
The aqueous electrocatalytic reduction of NO3 - into NH3 (NitrRR) presents a sustainable route applicable to NH3 production and potentially energy storage. However, the NitrRR involves a directly eight-electron transfer process generally required a large overpotential (<-0.2â V versus reversible hydrogen electrode (vs. RHE)) to reach optimal efficiency. Here, inspired by biological nitrate respiration, the NitrRR was separated into two stages along a [2+6]-electron pathway to alleviate the kinetic barrier. The system employed a Cu nanowire catalyst produces NO2 - and NH3 with current efficiencies of 91.5 % and 100 %, respectively at lower overpotentials (>+0.1 vs. RHE). The high efficiency for such a reduction process was further explored in a zinc-nitrate battery. This battery could be specified by a high output voltage of 0.70â V, an average energy density of 566.7â Wh L-1 at 10â mA cm-2 and a power density of 14.1â mW cm-2 , which is well beyond all previously reported similar concepts.
RESUMO
Correction for 'Super-large dendrites composed of trigonal PbO2 nanoplates with enhanced performances for electrochemical devices' by Liang-Xin Ding et al., Chem. Commun., 2012, 1275-1277, DOI: 10.1039/C2CC15271A.
RESUMO
Correction for 'Cu2O template synthesis of high-performance PtCu alloy yolk-shell cube catalysts for direct methanol fuel cells' by Sheng-Hua Ye et al., Chem. Commun., 2014, 50, 12337-12340, DOI: 10.1039/C4CC04108A.
RESUMO
We demonstrate a simple and effective chemical equilibrium regulation strategy to improve the efficiency of electrochemical ammonia synthesis by constructing electrochemical reaction system that works at significantly lower pressure than the Haber-Bosch process. Transferring the nitrogen reduction reaction from ambient conditions to a lightly pressurized environment not only accelerates the activation of the N≡N triple bond but also inhibits the competing reaction of hydrogen evolution while promoting the dissolution and diffusion of nitrogen. The verification experiment of using well-designed Fe3 Mo3 C/C composite nanosheets as the nitrogen reduction catalyst shows that the lower pressure reaction system can improve the Faradaic current efficiency by one order of magnitude. Moreover, the comparatively low-pressure reaction system can greatly reduce the cell voltage of the ammonia synthesis reaction (up to 33 %) even at the relatively low pressure of 0.7â MPa, which is of significance for decreasing the energy consumption of electrochemical ammonia synthesis under mild conditions.
RESUMO
The electrochemical reduction of nitrogen into ammonia under ambient conditions is a potential strategy for sustainable ammonia production. At present, one of the main research directions in the field of electrochemical nitrogen fixation is to improve the current efficiency and ammonia yield by developing efficient nitrogen reduction catalysts. To optimise the selectivity and catalytic activity of nitrogen reduction catalysts more efficiently, herein, we systematically summarise the progress of research on nitrogen reduction catalysts in recent years and present some general catalyst design strategies. Considering that it is difficult for metal-based catalysts to balance the competitive reactions of nitrogen activation and hydrogen evolution, we discuss in detail the advantages and application prospects of non-metallic catalysts in electrochemical nitrogen fixation. Moreover, both the design strategy of surface or interface defects, and how this atomic-level control of functionalisation helps to promote selectivity and catalytic activity are also discussed by theoretical and experimental electrochemistry. On this basis, we also discussed the future development direction, opportunities and challenges of nitrogen reduction electrocatalysts.
RESUMO
Constructing efficient catalysts for the N2 reduction reaction (NRR) is a major challenge for artificial nitrogen fixation under ambient conditions. Herein, inspired by the principle of "like dissolves like", it is demonstrated that a member of the nitrogen family, well-exfoliated few-layer black phosphorus nanosheets (FL-BP NSs), can be used as an efficient nonmetallic catalyst for electrochemical nitrogen reduction. The catalyst can achieve a high ammonia yield of 31.37â µg h-1 mg-1 cat. under ambient conditions. Density functional theory calculations reveal that the active orbital and electrons of zigzag and diff-zigzag type edges of FL-BP NSs enable selective electrocatalysis of N2 to NH3 via an alternating hydrogenation pathway. This work proves the feasibility of using a nonmetallic simple substance as a nitrogen-fixing catalyst and thus opening a new avenue towards the development of more efficient metal-free catalysts.
RESUMO
Metal-organic framework (MOF) membranes show great promise for propene/propane separation, yet a sharp molecular sieving has not been achieved due to their inherent linker mobility. Here, zeolitic imidazolate framework ZIF-8-type membranes with suppressed linker mobility are prepared by a fast current-driven synthesis (FCDS) strategy within 20 min, showing sharpened molecular sieving for propene/propane separation with a separation factor above 300. During membrane synthesis, the direct current promotes the metal ions and ligands to assemble into inborn-distorted and stiffer frameworks with ZIF-8_Cm (a newly discovered polymorph of ZIF-8) accounting for 60 to 70% of the membrane composition. Molecular dynamics simulations further verify that ZIF-8_Cm is superior to ZIF-8_I 4 ¯ 3 m (the common cubic phase) for propene/propane separation. FCDS holds great potential to produce high-quality, ultrathin MOF membranes on a large scale.
RESUMO
Electrocatalytic nitrogen fixation is considered a promising approach to achieve NH3 production. However, due to the chemical inertness of nitrogen, it is necessary to develop efficient catalysts to facilitate the process of nitrogen reduction. Here, molybdenum carbide nanodots embedded in ultrathin carbon nanosheets (Mo2 C/C) are developed to serve as a catalyst candidate for highly efficient and robust N2 fixation through an electrocatalytic nitrogen reduction reaction (NRR). The as-synthesized Mo2 C/C nanosheets show excellent catalytic performance with a high NH3 yield rate (11.3 µg h-1 mg-1 Mo2C ) and Faradic efficiency (7.8%) for NRR under ambient conditions. More importantly, the isotopic experiments using 15 N2 as a nitrogen source confirm that the synthesized ammonia is derived from the direct supply of nitrogen. This result also demonstrates the possibility of high-efficiency nitrogen reduction even though accompanied with vigorous hydrogen evolution.
RESUMO
Separator modification has been proved to be an effective approach for overcoming lithium polysulfide (LiPS) shuttling in lithium-sulfur (Li-S) cells. However, the weight and stability of the modified layer also affect the cycling properties and the energy density of Li-S cells. Here, we initially construct an ultrathin and lightweight MnO2 layer (380 nm, 0.014 mg cm-2) on a commercial polyethylene (PE) separator (MnO2@PE) through a chemical self-assembly method. This MnO2 layer is tightly anchored onto the PE substrate because of the presence of oxygen-containing groups that form a relatively strong chemical force between the MnO2 nanoparticles and the PE substrate. In addition, the mechanical strength of the separator is not affected by this modification procedure. Moreover, because of the catalytic effect and compactness of the MnO2 layer, the MnO2@PE separator can greatly suppress LiPS shuttling. As a result, the application of this MnO2@PE separator in Li-S batteries leads to high reversible capacity and superior cycling stability. This strategy provides a novel approach to separator surface modification.
RESUMO
Molecular sieving membranes with sufficient and uniform nanochannels that break the permeability-selectivity trade-off are desirable for energy-efficient gas separation, and the arising two-dimensional (2D) materials provide new routes for membrane development. However, for 2D lamellar membranes, disordered interlayer nanochannels for mass transport are usually formed between randomly stacked neighboring nanosheets, which is obstructive for highly efficient separation. Therefore, manufacturing lamellar membranes with highly ordered nanochannel structures for fast and precise molecular sieving is still challenging. Here, we report on lamellar stacked MXene membranes with aligned and regular subnanometer channels, taking advantage of the abundant surface-terminating groups on the MXene nanosheets, which exhibit excellent gas separation performance with H2 permeability >2200 Barrer and H2/CO2 selectivity >160, superior to the state-of-the-art membranes. The results of molecular dynamics simulations quantitatively support the experiments, confirming the subnanometer interlayer spacing between the neighboring MXene nanosheets as molecular sieving channels for gas separation.
RESUMO
We report the discovery of a dramatically enhanced N2 electroreduction reaction (NRR) selectivity under ambient conditions via the Li+ incorporation into poly(N-ethyl-benzene-1,2,4,5-tetracarboxylic diimide) (PEBCD) as a catalyst. The detailed electrochemical evaluation and density functional theory calculations showed that Li+ association with the O atoms in the PEBCD matrix can retard the HER process and can facilitate the adsorption of N2 to afford a high potential scope for the NRR process to proceed in the "[O-Li+]·N2-Hx" alternating hydrogenation mode. This atomic-scale incorporation strategy provides new insight into the rational design of NRR catalysts with higher selectivity.
RESUMO
Freestanding three-dimensional nitrogen-doped carbon foam with large pores is proposed as a promising electrode configuration for elastic electronics. Although it exhibits excellent mechanical performance, the capacitive performances (especially its rate capability) are still unsatisfactory. By using KMnO4, we demonstrate a smart etching and catalytic process to form highly graphitized and etched nitrogen-doped carbon foam (ENCF) with an exfoliated carbon-shell architecture. These compositional and structural features endow the ENCF electrodes with excellent electron conductivity as well as more ion-accessible electrochemical active sites. Significantly, all-solid-state symmetric supercapacitor devices based on the ENCF electrodes exhibit enhanced specific capacitance and marked high-rate capability. Furthermore, the integrated device has no significant capacity loss under 60% compressive strain.
RESUMO
Inhibiting CO formation can more directly address the problem of CO poisoning during methanol electro-oxidation. In this study, 1D self-supported porous PtAuP alloy nanotube arrays (ANTAs) are synthesized via a facile electro-codeposition approach and present enhanced activity and improved resistance to CO poisoning through inhibiting CO formation (non-CO pathway) during the methanol oxidation reaction in acidic medium. This well-controlled Pt-/transition metal-/nonmetal ternary nanostructure exhibits a specific electroactivity twice as great as that of PtAu alloy nanotube arrays and Pt/C. At the same time, PtAuP ANTAs show a higher ratio of forward peak current density (If ) to backward peak current density (Ib ) (2.34) than PtAu ANTAs (1.27) and Pt/C (0.78). The prominent If /Ib value of PtAuP ANTAs indicates that most of the intermediate species are electro-oxidized to carbon dioxide in the forward scan, which highlights the high electroactivity for methanol electro-oxidation.
RESUMO
Freestanding and highly compressible nitrogen-doped carbon foam (NCF) with excellent hydrophilicity and good electrochemical properties is prepared. Based on NCF electrodes, a high-performance all solid-state symmetric supercapacitor device is fabricated with native, full compressibility, and excellent mechanical stability, addressing two major problems in the current technology.
RESUMO
Hybrid electrocatalysts with excellent electrocatalytic activity for hydrogen reduction are fabricated using an efficient and facile electrochemical route. The electronic and synergistic effects between Co(OH)2 and polyaniline (PANI) in the composite structure are the key factors that generate the high electrocatalytic activity and excellent stability. A highly efficient, non-precious metal-based flexible electrocatalyst for high-performance electrocatalysts is shown, which reveals a novel route for the design and synthesis of electrocatalysts.