Nondestructive Assessment of Quality Characteristics of As-Built Additive Manufacturing Aeronautical AlSi10Mg and Inspection of Offset.

AlSi10Mg is widely used in additively manufacturing aeronautical lattice and honeycomb structures. The unclear complex quality characteristics has been an obstacle of nondestructive testing of additive manufacturing (AM) AlSi10Mg, especially at its as-built state. This article attempts to reveal the quality characteristics of as-built AM aeronautical AlSi10Mg based on its conductivity characteristics. Experimental results show that the quality of manufacturing is nonuniform. The nonuniformity of each sample surface is systematically evaluated. Along the building direction, the quality is best in the initial few layers and decreases as the built height increases. On this basis, a reference curve is obtained and used to describe the quality characteristics of as-built AM component along the building direction. Based on the quality characteristics, the inspection of small offsets caused by accidental failures during the manufacturing process is carried out. The offsets not <37 µm are detected with the help of the reference curve, whereas they are not discovered by the radiography testing. It proves that the proposed method of offset inspection is highly sensitive.

Formation of Supernarrow Borophene Nanoribbons.

Borophenes have sparked considerable interest owing to their fascinating physical characteristics and diverse polymorphism. However, borophene nanoribbons (BNRs) with widths less than 2 nm have not been achieved. Herein, we report the experimental realization of supernarrow BNRs. Combining scanning tunneling microscopy imaging with density functional theory modeling and ab initio molecular dynamics simulations, we demonstrate that, under the applied growth conditions, boron atoms can penetrate the outermost layer of Au(111) and form BNRs composed of a pair of zigzag (2,2) boron rows. The BNRs have a width self-contained to ∼1 nm and dipoles at the edges to keep them separated. They are embedded in the outermost Au layer and shielded on top by the evacuated Au atoms, free of the need for post-passivation. Scanning tunneling spectroscopy reveals distinct edge states, primarily attributed to the localized spin at the BNRs' zigzag edges. This work adds a new member to the boron material family and introduces a new physical feature to borophenes.

Genome-wide identification, phylogeny and expression analysis of the R2R3-MYB gene family in quinoa (Chenopodium quinoa) under abiotic stress.

The MYB transcription factor (TF) are among the largest gene families of plants being responsible for several biological processes. The R2R3-MYB gene family are integral player regulating plant primary and secondary metabolism, growth and development, and responses to hormones and stresses. The phylogenetic analysis combined with gene structure analysis and motif determination resulted in division of R2R3-MYB gene family into 27 subgroups. Evidence generated from synteny analyses indicated that CqR2R3-MYBs gene family is featured by tandem and segmental duplication events. On the basis of RNA-Seq data, the expression patterns of different tissues under salt treatment were investigated resulting CqR2R3-MYB genes high expression both in roots and stem of quinoa (Chenopodium quinoa ) plants. More than half of CqR2R3-MYB genes showed expression under salt stress. Based on this result, CqR2R3-MYB s may regulate quinoa plant growth development and resistance to abiotic stresses. These findings provided comprehensive insights on role of CqR2R3-MYBs gene family members in quinoa and candidate MYB gene family members can be further studies on their role for abiotic stress tolerance in crop plants.

Nitrogen Application Can Optimize Form of Selenium in Soil in Selenium-Rich Areas to Affect Selenium Absorption and Accumulation in Black Wheat.

The composition and form of selenium in the soil have significant effects on the selenium content of crops. In this study, we investigated the selenium absorption pathway in plants by studying the interaction between nitrogen fertilizer and soil selenium. Our results showed that the selenium concentration enrichment factors (CEF) varied within the same region due to nitrogen fertilizer application, where they ranged from 1.33 to 5.02. The soil selenium flow coefficient (mobility factor, MF) increased with higher nitrogen application rates. The sum of the MF values for each soil layer treated with nitrogen application rates of 192 kg hm-2 and 240 kg hm-2 was 0.70, which was 64% higher than that for the control group with no nitrogen application. In the 0-20 cm soil layer, the highest summed water-soluble and exchangeable selenium and relative percentage of total selenium (12.45%) was observed at a nitrogen application rate of 240 kg hm-2. In the 20-40 cm soil layer, the highest relative percentage content of water-soluble and exchangeable selenium and total selenium (12.66%) was observed at a nitrogen application rate of 192 kg hm-2. Experimental treatment of black wheat with various concentrations of sodium selenite showed that selenium treatment at 50 µmol L-1 significantly increased the reduced glutathione (GSH) levels in the leaves and roots of seedlings, where the GSH contents increased by 155.4% in the leaves and by 91.5% in the roots. Further analysis of the soil-black wheat system showed that nitrogen application in selenium-rich areas affected the soil selenium flow coefficient and morphological composition, thereby changing the enrichment coefficient for leaves (0.823), transport capacity from leaves to grains (-0.530), and enrichment coefficient for roots (0.38). These changes ultimately affected the selenium concentration in the grains of black wheat.

Does F4TCNQ Adsorption on Cu(111) Form a 2D-MOF?

The results of a quantitative experimental structural investigation of the adsorption phases formed by 2,3,5,6-tetrafluoro-7,7',8,8'-tetracyanoquinodimethane (F4TCNQ) on Cu(111) are reported. A particular objective was to establish whether Cu adatoms are incorporated into the molecular overlayer. A combination of normal incidence X-ray standing waves, low-energy electron diffraction, scanning tunneling microscopy, and X-ray photoelectron spectroscopy measurements, complemented by dispersion-inclusive density functional theory calculations, demonstrates that F4TCNQ on Cu(111) does cause Cu adatoms to be incorporated into the overlayer to form a two-dimensional metal-organic framework (2D-MOF). This conclusion is shown to be consistent with the behavior of F4TCNQ adsorption on other coinage metal surfaces, despite an earlier report concluding that the adsorption structure on Cu(111) is consistent with the absence of any substrate reconstruction.

Extending on-surface synthesis from 2D to 3D by cycloaddition with C60.

As an efficient molecular engineering approach, on-surface synthesis (OSS) defines a special opportunity to investigate intermolecular coupling at the sub-molecular level and has delivered many appealing polymers. So far, all OSS is based on the lateral covalent bonding of molecular precursors within a single molecular layer; extending OSS from two to three dimensions is yet to be realized. Herein, we address this challenge by cycloaddition between C60 and an aromatic compound. The C60 layer is assembled on the well-defined molecular network, allowing appropriate molecular orbital hybridization. Upon thermal activation, covalent coupling perpendicular to the surface via [4 + 2] cycloaddition between C60 and the phenyl ring of the molecule is realized; the resultant adduct shows frozen orientation and distinct sub-molecular feature at room temperature and further enables lateral covalent bonding via [2 + 2] cycloaddition. This work unlocks an unconventional route for bottom-up precise synthesis of three-dimensional covalently-bonded organic architectures/devices on surfaces.

Nitrogen fertilization and precipitation affected Wheat (Triticum aestivum L.) in dryland the Loess Plateau of South Shanxi, China.

Wheat (Triticum aestivum L.) is a staple crop worldwide, and its yield has improved since the green revolution, which was attributed to chemical nitrogen (N) fertilizer application. An experiment was conducted to set seven nitrogen application levels of N0, N90, N120, N150, N180, N210 and N240 kg ha-1 before sowing. The results showed that grain yield under the nitrogen rate of N210 kg ha-1 was significantly increase the water intake during jointing to anthesis, Soil water storage of dryland wheat in fallow period was higher than water consumption in jointing stage and the leaf area index at anthesis, the tiller percentage rate, the jointing-anthesis, and nitrogen accumulation were closely related to yield and its components. Nitrogen fertiliser rate N150 kg ha-1 significantly increased dry matter buildup from jointing to flowering in dryland wheat compared to N fertiliser rate N210 kg ha-1. The rise of nitrogen application rate, there were no significant variance in nitrogen accumulation of Stem + leaf sheath and cob + glume at maturity, respectively. N fertiliser rate N210 kg ha-1 compared to N180 kg ha-1 significantly reduced grain gliadin content in dryland wheat, respectively. Wheat crops under N210 kg ha-1 could achieve both high NUE and grain yield simultaneously with only moderate N fertilizer in South Shanxi, China.

Long-Term Nutrient Cycle in Improved Grain Yield of Dryland Winter Wheat (Triticum aestivum L.) under Hydrological Process of Plant Ecosystem Distribution in the Loess Plateau of China.

Precipitation is the major cause of crop yield variation in rainfed agriculture production in the Loess Plateau. As over fertilization is economically and environmentally undesirable, and crop yield and the resulting returns for N input are uncertain when rainfall variability is high, optimizing N management according to precipitation during fallow season is vital for efficient crop water use and high yield in dryland rainfed farming systems. Results show that the nitrogen treatment rate of 180 treatment significantly increased the tiller percentage rate, and the leaf area index at anthesis, the jointing anthesis, anthesis maturity dry matter, and nitrogen accumulation was closely related to yield. N150 treatment compared to N180 treatment significantly increased the percentage of ear-bearing tiller by 7%, dry substance accretion from jointing to anthesis by 9%, and yield by 17% and 15%, respectively. Our study has important implications for the assessment of the effects of fallow precipitation, as well as for the sustainable development of dryland agriculture in the Loess Plateau. Our results indicate that adjusting N fertilizer inputs based on summer rainfall variation could enhance wheat yield in rainfed farming systems.

Large left paraduodenal hernia identified and repaired by laparoscopy: A case report.

Paraduodenal hernias (PDHs) are rare types of internal hernias that pose a significant diagnostic and therapeutic challenge because they can present with non-specific symptoms ranging from digestive disorders and chronic abdominal pain to symptoms of intestinal obstruction which may be life-threatening. We describe here a woman in her early 30's who presented to the emergency department with a three-hour history of generalized intermittent crampy abdominal pain. She had experienced multiple similar episodes of this pain over the past 20 years. Totally laparoscopic technique was used to complete the diagnosis and treatment of a large left PHD with accompanying acute intestinal obstruction. The operation was successful and the patient was discharged from hospital 10 days later. PDH should be considered if a patient complains of recurrent abdominal pain without any other obvious explanation; a laparoscopic approach can be used to identify and repair the hernia.

Progress on genomics and locus of important agronomic traits in Chenopodium quinoa.

Quinoa (Chenopodium quinoa, Willd.) as a new health food in the 20th century, its comprehensive nutritional composition, stress resistance and other characteristics have been paid much of attention, and enjoys the reputation of "nutritional gold", "vegetarian king" and "food in the future" in the world. In recent years, with the rapid development of genomics and high-throughput sequencing technology, the high-quality whole genome sequence of quinoa has been completed, and the omics analysis and functional research of a series of key genes have been gradually carried out. In this review, we summarize the research progress in quinoa genomics, gene family analysis of important transcription factors, genetic map construction, QTL mapping of important traits, and genes for important agronomic and yield traits. Moreover, according to the current status of quinoa breeding, this paper also put forward five key problems in quinoa breeding, and pointed out four important directions of genetic improvement and breeding of quinoa in the future, so as to provide reference for the realization of directional genetic improvement of quinoa in the future.

Stronger mutualistic interactions with arbuscular mycorrhizal fungi help Asteraceae invaders outcompete the phylogenetically related natives.

Mutualistic interactions with arbuscular mycorrhizal fungi (AMF) greatly affect the outcome of plant-plant competition, especially for invasive plants competing against native plants. We examined the effects of AMF on the competition between invasive Asteraceae plants and the phylogenetically related native plants. We compared the performance of seven invasive Asteraceae plants from different genera with that of their phylogenetically related native counterparts in response to AMF in monocultures and mixed cultures. We investigated how interactions with AMF impact the competition between Asteraceae relatives. Total biomass increased with AMF colonization in both invasive and native plants. Arbuscular mycorrhizal fungi improved the competitiveness of invasive plants, but decreased that of native plants. Competition increased the shoot nitrogen, phosphorus and root myristic acid concentrations and relative expression of fatty acid transporter genes (RiFAT1 and RiFAT2) in AMF-colonized invasive plants, but decreased those in AMF-colonized native plants. Structural equation models indicated that the presence of AMF increased the uptake of phosphorus, but not nitrogen, by invasive plants, which probably provided more myristic acids to symbiotic AMF in return. These results suggest that invasive Asteraceae plants have greater mutualistic interactions with AMF than their phylogenetically related native counterparts, potentially contributing to invasion success.

Super-Robust Xanthine-Sodium Complexes on Au(111).

A widely accepted theory is that life originated from the hydrothermal environment in the primordial ocean. Nevertheless, the low desorption temperature from inorganic substrates and the fragileness of hydrogen-bonded nucleobases do not support the required thermal stability in such an environment. Herein, we report the super-robust complexes of xanthine, one of the precursors for the primitive nucleic acids, with Na. We demonstrate that the well-defined xanthine-Na complexes can only form when the temperature is ≥430 K, and the complexes keep adsorbed even at ≈720 K, presenting as the most thermally stable organic polymer ever reported on Au(111). This work not only justifies the necessity of high-temperature, Na-rich environment for the prebiotic biosynthesis but also reveals the robustness of the xanthine-Na complexes upon the harsh environment. Moreover, the complexes can induce significant electron transfer with the metal as inert as Au and hence lift the Au atoms up.

Prevalence and Strain Composition of Potato virus Y Circulating in Potato Fields in China's North-Central Province of Shanxi.

Potato is an important crop in Shanxi province, located in north-central China. In 2019 to 2020, 319 potato leaf samples were collected from eight locations distributed in three major potato production areas in Shanxi. BioChip testing revealed the presence of several potato viruses, of which Potato virus Y (PVY) was the most common, reaching an incidence of 87.8% of all symptomatic samples. Immunocaptured multiplex reverse transcription (RT) PCR was used to identify strains for all 280 PVY-positive samples, unveiling 242 samples infected with a single strain of PVY (86.4%) and 38 (13.6%) with a mixed infection. Of samples with a single-strain infection, PVY-SYR-II accounted for 102 (42.1%), followed by PVYN-Wi (33, 13.6%), PVY-SYR-I (28, 11.6%), 261-4 (22, 9.1%), PVYNTNa (20, 8.3%), PVYNTNb (19, 7.9%), and PVY-SYR-III (18, 7.4%). Seven isolates representing different recombinants were selected for whole genome sequencing. Phylogenetic and recombination analyses confirmed the RT-PCR-based strain typing for all seven strains of PVY found in Shanxi. SXKL-12 is the first SYR-III strain from potato reported from China. However, unlike that in other known SYR-III isolates, the region positioned from 1,764 to 1,902 nt in SXKL-12 shared the highest sequence identity of 82.2% with an uncharacterized PVY isolate, JL-23, from China. Interestingly, PVYN-Wi isolate SXZY-40 also possessed a more divergent sequence for the region positioned from 6,156 to 6,276 nt than other N-Wi isolates known to date, sharing the highest identity of 86.6% with an uncharacterized Chinese PVY isolate, JL-11. Pathogenicity analysis of dominant strains PVY-SYR-II and PVYN-Wi in six local popular potato cultivars revealed that 'Kexin 13', 'Helan 15', and 'Jizhangshu 12' were susceptible to these two strains, with mild mottling or mosaic symptom expression, and three cultivars, 'Jinshu 16', 'Qingshu 9', and 'Xisen 6', were fully resistant.

Subsurface-Carbon-Induced Local Charge of Copper for an On-Surface Displacement Reaction.

Transition-metal carbides have sparked unprecedented enthusiasm as high-performance catalysts in recent years. Still, the catalytic properties of copper carbide remain unexplored. By introducing subsurface carbon to Cu(111), a displacement reaction of a proton in a carboxyl acid group with a single Cu atom is demonstrated at the atomic scale and room temperature. Its occurrence is attributed to the C-doping-induced local charge of surface Cu atoms (up to +0.30 e/atom), which accelerates the rate of on-surface deprotonation via reduction of the corresponding energy barrier, thus enabling the instant displacement of a proton with a Cu atom when the molecules adsorb on the surface. This well-defined and robust Cuδ+ surface based on subsurface-carbon doping offers a novel catalytic platform for on-surface synthesis.

On-Surface Decarboxylation Coupling Facilitated by Lock-to-Unlock Variation of Molecules upon the Reaction.

On-surface synthesis (OSS) involving relatively high energy barriers remains challenging due to a typical dilemma: firm molecular anchor is required to prevent molecular desorption upon the reaction, whereas sufficient lateral mobility is crucial for subsequent coupling and assembly. By locking the molecular precursors on the substrate then unlocking them during the reaction, we present a strategy to address this challenge. High-yield synthesis based on well-defined decarboxylation, intermediate transition, and hexamerization is demonstrated, resulting in an extended and ordered network exclusively composed of the newly synthesized macrocyclic compound. Thanks to the steric hindrance of its maleimide group, we attain a preferential selection of the coupling. This work unlocks a promising path to enrich the reaction types and improve the coupling selectivity hence the structual homogeneity of the final product for OSS.

Plasmonic Enhanced Reactive Oxygen Species Activation on Low-Work-Function Tungsten Nitride for Direct Near-Infrared Driven Photocatalysis.

Realizing near-infrared (NIR) driven photocatalytic reaction is one of the promising strategies to promote the solar energy utilization and photocatalytic efficiencies. However, effective reactive oxygen species (ROS) activation under NIR irradiation remains to be great challenge for nearly all previously reported photocatalysts. Herein, the cubic-phase tungsten nitride (WN) with strong plasmonic NIR absorption and low-work function (≈3.59 eV) is proved to be able to mediate direct ROS activation by both of experimental observation and theoretical simulation. The cubic WN nanocubes (NCs) are synthesized via the hydrothermal-ammonia nitridation process and its NIR-driven photocatalytic properties, including photocatalytic degradation, hydroxylation, and de-esterification, are reported for the first time in this work. The 3D finite element simulation results demonstrate the size dependent and wavelength tuned plasmonic NIR absorption of the WN NCs. The NIR-driven photocatalytic mechanism of WN NCs is proposed based on density functional theory (DFT) calculated electronic structure and facet dependent O2 (or H2 O) molecular activation, radicals scavenging test, spin trapped electron paramagnetic resonance measurements, and ultraviolet photoelectronic spectrum (UPS). Overall, the results in this work pave a way for the application of low-work-function materials as highly reactive NIR photocatalyst.

Long-range ordered and atomic-scale control of graphene hybridization by photocycloaddition.

Chemical reactions that convert sp2 to sp3 hybridization have been demonstrated to be a fascinating yet challenging route to functionalize graphene. So far it has not been possible to precisely control the reaction sites nor their lateral order at the atomic/molecular scale. The application prospects have been limited for reactions that require long soaking, heating, electric pulses or probe-tip press. Here we demonstrate a spatially selective photocycloaddition reaction of a two-dimensional molecular network with defect-free basal plane of single-layer graphene. Directly visualized at the submolecular level, the cycloaddition is triggered by ultraviolet irradiation in ultrahigh vacuum, requiring no aid of the graphene Moiré pattern. The reaction involves both [2+2] and [2+4] cycloadditions, with the reaction sites aligned into a two-dimensional extended and well-ordered array, inducing a bandgap for the reacted graphene layer. This work provides a solid base for designing and engineering graphene-based optoelectronic and microelectronic devices.

Wheat methionine sulfoxide reductase A4.1 interacts with heme oxygenase 1 to enhance seedling tolerance to salinity or drought stress.

KEY MESSAGE: Here, a functional characterization of a wheat MSR has been presented: this protein makes a contribution to the plant's tolerance of abiotic stress, acting through its catalytic capacity and its modulation of ROS and ABA pathways. The molecular mechanism and function of certain members of the methionine sulfoxide reductase (MSR) gene family have been defined, however, these analyses have not included the wheat equivalents. The wheat MSR gene TaMSRA4.1 is inducible by salinity and drought stress and in this study, we demonstrate that its activity is restricted to the Met-S-SO enantiomer, and its subcellular localization is in the chloroplast. Furthermore, constitutive expression of TaMSRA4.1 enhanced the salinity and drought tolerance of wheat and Arabidopsis thaliana. In these plants constitutively expressing TaMSRA4.1, the accumulation of reactive oxygen species (ROS) was found to be influenced through the modulation of genes encoding proteins involved in ROS signaling, generation and scavenging, while the level of endogenous abscisic acid (ABA), and the sensitivity of stomatal guard cells to exogenous ABA, was increased. A yeast two-hybrid screen, bimolecular fluorescence complementation and co-immunoprecipitation assays demonstrated that heme oxygenase 1 (HO1) interacted with TaMSRA4.1, and that this interaction depended on a TaHO1 C-terminal domain. In plants subjected to salinity or drought stress, TaMSRA4.1 reversed the oxidation of TaHO1, activating ROS and ABA signaling pathways, but not in the absence of HO1. The aforementioned properties advocate TaMSRA4.1 as a candidate for plant genetic enhancement.

Formation of Hypoxanthine Tetrad by Reaction with Sodium Chloride: From Planar to Stereo.

By reacting with NaCl on Au(111), the formation of hypoxanthine (HX) tetrads is demonstrated at the atomic scale in real space. These results directly demonstrate that alternative purine tetrads can be formed in both planar and non-planar configuration, and that ionic bonding plays a crucial role for the formation and planar-to-stereo transformation of the tetrads, providing deeper insight for constructing artificial DNA/RNA quadruplexes. Moreover, both the tilted HXs and Na show strong charge transfer with the substrate in the non-planar phase. The insights gained by this work also open up new routes to tune the electrostatic nature of metal-organic interfaces and design stereo-nanostructures on surfaces.

Xanthine Quartets on Au(111).

The quartet of xanthine (X), a purine base ubiquitously distributed in most human body tissues and fluids, has been for the first time fabricated and visualized, as the first alternative purine quartet besides the known guanine (G)-quartet. The X-quartet network is demonstrated to be the most stable phase on Au(111). Unlike guanine, the fabrication of the X-quartets is not dependent on the presence of metal atoms, which makes it the first metal-free purine quartet. The X-quartet holds great promise to potentially construct artificial new DNA quadruplexes for genetic regulation and antitumor therapy. Moreover, both the X-quartet itself and the quartet networks favor homochirality, suggesting homochiral xanthine oligomers and the networks may have been formed as the precursors of the pristine oligonucleotides on primitive Earth.