Comparison of intravenous coronary angiography using synchrotron radiation with selective coronary angiography.

Intravenous coronary angiography with synchrotron radiation is a novel and minimally invasive technique for coronary imaging. At the Hamburger Synchrotronstrahlungslabor HASYLAB at DESY, a dedicated angiography system has been developed, which has been shown to provide detailed images of coronary artery segments. For each scan, two monochromatic X-ray images below and above the K-edge of iodine were recorded simultaneously. The two images were subtracted logarithmically to produce a maximal contrast enhancement of the iodine. To date, the procedure has been carried out on 379 outpatients. No complications occurred during or after the angiographic procedure, and hospitalization was not required in any subject. The acceptance by patient is extremely high. Five outside reviewers, blinded as to the clinical data or prior angiographic interpretation, reviewed the images for the presence or absence of 70% or more occlusion of a vessel. They reached a sensitivity of 79% and a specificity of 99%. The study has demonstrated that the synchrotron method has satisfactory sensitivity and very high specificity for severe stenoses. The new method has several advantages over magnetic resonance imaging (MRI), electron beam computed tomography (EBCT), and multi-slice computed tomography (MSCT). Neither vascular calcification (CT) nor the presence of metal stents (MRI) impairs the evaluation of perfusion of segments of the coronary arteries. Furthermore, the spatial resolution is three or four times higher using synchrotron angiography, and problems due to respiratory motion are eliminated.

Intravenous coronary angiography using synchrotron radiation: technical description and preliminary results.

BACKGROUND: Standard coronary angiography requires an arterial access and catheters; intravenous coronary angiography may image coronary arteries noninvasively and without catheters. The aim of this study was the assessment of the diagnostic accuracy of intravenous coronary angiography validated by selective coronary angiography. METHODS: Seventy outpatients (80% males, mean age 62 +/- 8 years) underwent both standard and intravenous coronary angiography after a previous coronary intervention. Intravenous coronary angiography was performed within 6 weeks before or after selective coronary angiography. Two different projections were used to obtain 6-8 sequences per patient. Images were taken after injection of the contrast agent into the brachial vein or into the superior vena cava. During image acquisition, patients were moved through the scanning beam on a special chair. Thereafter, images were evaluated and compared to selective coronary angiograms for the following criteria: no stenosis, subsignificant stenosis (< 70%), significant stenosis (> or = 70%), and occlusion. RESULTS: One hundred eighty-seven target vessels were analyzed. In 50 target vessels one or more stents had been implanted. Seventeen target vessels were not analyzable due to inadequate image quality. The sensitivity of intravenous coronary angiography for the detection of lesions was 80% and the specificity was 95%. The sensitivity for the detection of significant lesions in the left anterior descending coronary artery was 84% (specificity 93%), in the left circumflex coronary artery 67% (specificity 90%), in the right coronary artery 85% (specificity 97%), and in bypass grafts 85% (specificity 97%). No complications were observed. CONCLUSIONS: Intravenous coronary angiography is efficacious and safe and allows quantification of lesions of the coronary arteries and of bypass vessels. Further advances in image processing are needed to improve sensitivity especially in the left circumflex coronary artery.

[Intravenous coronary angiography with synchrotron radiation]. / Intravenöse Koronarangiographie mit Synchrotronstrahlung.

INTRODUCTION: Coronary artery disease still remains the primary cause of death in the western industrialized world. Although the clinical value of selective coronary angiography (SCA) is beyond dispute, the associated risk of an invasive approach, the inherent costs and the necessary hospitalization have lead to the development and investigation of novel non-invasive techniques for coronary imaging. Intravenous coronary angiography (ICA) has been shown to permit non-invasive imaging of the coronary arteries. METHODS: In 66 pts (80% male, age 62 (+/- 8.5 yrs) after interventional therapy/CABG operation, ICA and a SCA were carried out within a time interval of < 6 weeks. After determination of the individual circulation time, contrast media (370 mg iodine/ml, 15 ml/s, 21 ml) was injected via a sheath in the cubital vein while the patient was sitting in an upright position in a specially designed scanning chair. In two different projections 6-8 images/patient were obtained for further image processing and evaluation. 182 target vessels had to be evaluated (LAD 55, Cfx 21, RCA 54, Grafts 52). In 50 target vessels one or more stents were implanted. RESULTS: 182 target vessels were evaluated according to the following criteria: no stenosis, < 70%, > = 70%, occlusion. Evaluation of the ICA and SCA images was performed by two independent investigators. Due to poor image quality, 17 vessels were not evaluated. The ICA findings were compared to that of SCA. For the LAD a sensitivity of 84% (specificity 93%), for the RCA a sensitivity of 85% (specificity 97%), for the Cfx a sensitivity of 67% (specificity 90%), and for grafts a sensitivity of 85% (specificity 97%) was calculated. CONCLUSION: ICA proved to be a feasible and safe technique for follow-up after coronary intervention/CABG operation on an outpatient basis. Evaluation of stents and severe calcification is possible. A good image quality provided, LAD RCA and grafts can be evaluated with an acceptable sensitivity and specificity. Due to superimpositioning the low sensitivity for the Cfx has to be compensated by further image processing.

Intravenous coronary angiography with dichromography using synchrotron radiation.

Dichromography represents a digital subtraction angiography mode based on energy substraction which allows imaging of fast moving subjects like the heart. For logarithmic subtraction 2 images with X-rays just below and above the iodine K-edge (33.17 keV) are simultaneously obtained in a line scan mode. Monochromatic X-rays of sufficient intensity to visualize coronary arteries of 1 mm diameter with extremely low iodine concentrations (1 mg/cm2) after venous injection is only provided by synchrotron radiation. The system NIKOS (non-invasive coronary arteriography with synchrotron radiation) at the Deutsches Elektronen Synchrotron (DESY) consists of 6 components: a wiggler, a monochromator, a safety system, a scanning device, a detector and a computer system. After experimental studies in dogs patients are imaged since 1990. Initial results demonstrate feasibility and safety of synchrotron radiation coronary angiography. Large scale studies are designed to further evaluate sensitivity and specificity. When compact synchrotron radiation sources become available, this technique could be used for follow-up studies and for evaluation of certain high coronary risk populations.

A fast low-noise line scan x-ray detector.

A fast, low-noise line scan detector (NIKOS) for digital radiography has been developed. It consists of an input x-ray phosphor screen that is coupled to a modified Reticon photodiode array by means of fiber optics with incorporated image intensifier. In its current version the detector can be operated with a maximum 500 Hz image acquisition rate for interlaced readout of two lines of 128 pixels each. Using a Gd2O2S:Tb x-ray input phosphor, an afterglow of 25% in the first subsequent readout was observed. We also conducted afterglow measurements on several other powder and single-crystal phosphors and the photodiode array. Using CdWO4, the afterglow of the detector is limited by the lag of the photodiode array of 4.5%. By modifying the readout electronics the noise of the photodiode array was reduced to below 1 Graylevel, corresponding to a signal-to-noise ratio of 5200. The detective quantum efficiency (DQE) of the detector ranged from 0.18 to 0.4 for typical signal levels. The sensitivity was 10% saturation per 1.9 mR entrance dose. The modular design of the NIKOS detector allows for individual selection of each component to optimize performance for a given application.