Evolution of local misorientations in the γ/γ'-microstructure of single crystal superalloys during creep studied with the rotation vector baseline (RVB) EBSD method.

The present work uses the rotation vector baseline electron back scatter orientation imaging method (RVB-EBSD) to study the evolution of small misorientations between the γ- and γ'-phase in Ni-base single crystal superalloys (SXs) during creep. For this purpose, two material states of the SX ERBO1 (CMSX4 type) were characterized after creep deformation at 850°C and 600 MPa to final strains of 1% and 2%. Obtaining reliable phase boundary misorientation (PBM), kernel average misorientation (KAM) and orientation spread (OS) data represents a challenge for electron backscatter diffraction (EBSD), not only because the method operates at its limits of lateral and angular resolution, but also because it is difficult to differentiate between the two phases merely based on Kikuchi diffraction. The two phases differ in chemical composition which gives rise to different EBSD background intensities. These can be exploited to differentiate between the two phases. In the present work, crystallographic and chemical information are combined to demonstrate that orientation imaging can be used to document the formation of dislocation networks at γ/γ'-interfaces and the filling of γ-channels by dislocations. These findings are in good agreement with reference results from diffraction contrast scanning transmission electron microscopy. It is also shown that misorientations evolve between small groups of equally oriented γ/γ'-neighborhoods, on a size scale above characteristic γ/γ'-dimensions (>0.5 µm) and below distances associated with dendritic mosaicity (<200 µm). The methodological aspects as well as the new material specific results are discussed in the light of previous work published in the literature. RESEARCH HIGHLIGHTS: Microstructure evolution during [001] tensile creep of Ni-based single-crystalline alloy. Application of RVB-EBSD technique, focused on angular misorientations between γ/γ' phases, with accuracy of 0.01°. Separation of γ/γ' phases using experimental post-processing of raw EBSD data.

NiTi Alloys Exposure Alters miR-124 Expression in Physiological and Osteoarthritic Osteoblasts.

PURPOSE OF THE STUDY Nitinol (NiTi) is a biomaterial widely used in medicine based on super-elastic and shape memory properties. miR-124 has a key role in inflammatory process, osteoblasts differentiation, and mineralization. The aim of study was evaluating the differences in gene expression of miR-124 of human physiological osteoblasts (HOB) and human osteoarthritic osteoblasts (OSBA) as a response to NiTi alloy in different heat treatments. MATERIAL AND METHODS The cells were cultivated with NiTi discs with/without addition of bacterial lipopolysaccharide (LPS) for 72 hours. MicroRNAs were isolated, underwent reverse transcription and were analyzed by RT-PCR. RESULTS As a response to LPS, HOB overexpressed miR-124, while in OSBA expression change did not occur. Overexpression was also observed in both cell lines as a response to hydrogen and helium treated NiTi discs. HOB expressed significantly higher amount of miR-124 than OSBA as a response to hydrogen treatment of NiTi discs. In addition, hydrogen treatment caused significantly higher expression in HOB than LPS. The combination of NiTi disc and LPS treatment in HOB didn't cause any expression changes. Comparing to LPS-only treatment, the expression in HOB with combination of LPS and alloy was significantly lower. In OSBA, the expression was increased by the combination of LPS and hydrogen disc, in case of helium disc, the expression was decreased. CONCLUSIONS In conclusion, human physiological and osteoarthritic osteoblasts respond to NiTi alloy with both surface (hydrogen and helium atmosphere) treatment by overexpression of miR-124. The effect of LPS as inflammatory modulator suggests the presence of an "anti-inflammatory preconditioning" in osteoarthritic osteoblasts, as physiological osteoblasts overexpression was significantly higher. Key words: nitinol, osteoblast, miR-124, lipopolysaccharide.

Benchmark dataset of the effect of grain size on strength in the single-phase FCC CrCoNi medium entropy alloy.

This data article presents the microstructural data as well as the mechanical properties of the CrCoNi medium-entropy alloy (MEA). The data presented in this article are related to the research article entitled "Analysis of strengthening due to grain boundaries and annealing twin boundaries in the CrCoNi medium-entropy alloy", see Ref. Schneider et al., 2019. This article can be referred to for the analysis and interpretation of the data, as well as their comparison to other datasets in literature. Microstructural data available in the present paper are backscattered electron micrographs for sixteen different grain sizes. Also available are pdf reports of grain size analysis (annealing twin boundaries were neglected) and crystallite sizes (including annealing twin boundaries) as well as data describing the number of annealing twin boundaries per grain (n), corresponding Taylor factors (M) and average annealing twin thicknesses (t). Additionally, raw data of stress-strain curves at five different temperatures [77 K, 293 K, 473 K, 673 K and 873 K] are given for all sixteen grain sizes, which may be used for further research, e.g. data mining, machine learning and other analytical methods. Mechanical data such as yield stresses (σ 0.2% ), Hall-Petch parameters (σ 0 and k y ) and critical boundary strengths (τ c ) are provided along with a 1D discrete dislocation dynamics (1-D DDD) simulation results concerning the different boundary strengths.

Advanced scanning transmission stereo electron microscopy of structural and functional engineering materials.

Stereo transmission electron microscopy (TEM) provides a 3D impression of the microstructure in a thin TEM foil. It allows to perform depth and TEM foil thickness measurements and to decide whether a microstructural feature lies inside of a thin foil or on its surface. It allows appreciating the true three-dimensional nature of dislocation configurations. In the present study we first review some basic elements of classical stereo TEM. We then show how the method can be extended by working in the scanning transmission electron microscope (STEM) mode of a modern analytical 200 kV TEM equipped with a field emission gun (FEG TEM) and a high angle annular dark field (HAADF) detector. We combine two micrographs of a stereo pair into one anaglyph. When viewed with special colored glasses the anaglyph provides a direct and realistic 3D impression of the microstructure. Three examples are provided which demonstrate the potential of this extended stereo TEM technique: a single crystal Ni-base superalloy, a 9% Chromium tempered martensite ferritic steel and a NiTi shape memory alloy. We consider the effect of camera length, show how foil thicknesses can be measured, and discuss the depth of focus and surface effects.