Comfort and wearability properties of custom-made and boil-and-bite mouthguards among basketball players: A randomized parallel arm clinical trial.

BACKGROUND/AIM: Thermoplastic mouthguards have been a reliable means of protection against impacts and shocks for a century. Although orofacial injuries are prevalent among basketball players, many athletes still avoid using mouthguards due to concerns regarding impaired breathing, speech interference, and nausea. This study aims to compare basketball players' subjective assessments of two different thicknesses of custom-made mouthguards (MGs) with boil-and-bite MGs (B&B MG). MATERIAL AND METHODS: A total of 60 systematically healthy male professional basketball players, without active orthodontic treatment, were enrolled and randomly assigned to three groups: Group 1 (received B&B MGs; n = 20), Group 2 (received custom-made MGs with a 3 mm thickness [ethyl vinyl asetat]; n = 20), and Group 3 (received custom-made MGs with a 5 mm thickness; n = 20). To evaluate MG comfort and usability, 12 key factors, including comfort, fit, stability, tiredness, thirsting, oral dryness, nausea, speaking, breathing, drinking, ease of wear and removal, and inclination to chew, were assessed. The athletes were made to rate these factors using a 10 cm-long Visual Analog Scale, measured at three-time intervals, and the values for both inter-group and intra-group were compared. RESULTS: Data from 48 basketball players were retrieved, and data analysis revealed that B&B MGs had the least favorable parameter values. Among the B&B MG group, stability was reported to be poorer during the initial measurement (p < .05). In the second measurement, B&B MGs showed significantly lower values for comfort, stability, tiredness, speaking, and inclination to chew (p < .05). During the third measurement, the B&B MG group exhibited significantly reduced values for comfort, breathing, drinking, and speaking (p < .05). In contrast, no statistically significant difference was observed between 3 and 5 mm thickness MGs in these measurements. CONCLUSIONS: Custom-made MGs with different thicknesses consistently outperformed B&B MGs in all measurements, indicating the potential to tailor MG thickness based on sport, age, professional level of athlete, and presence of other protective equipment. While custom-made mouthguards are considered the gold standard, dentists who provide B&B MGs can lead to cost savings while maintaining protection and encouraging athletes to use higher-quality custom-made mouthguards.

Effects of topically administered 0.6% hyaluronic acid on the healing of labial frenectomy in conventional and 940-nm indium gallium arsenide phosphide (InGaAsP) diode laser techniques in pediatric patients: a randomized, placebo-controlled clinical study.

This study aimed to investigate the effects of 0.6% hyaluronic acid (HA) gel on the healing process and postoperative pain levels after diode laser-assisted labial frenectomy in pediatric patients. Ninety-six pediatric patients (females, 50 and males, 46) aged 8-14 years were randomly divided into four groups as follows: (1) conventional frenectomy with 0.6% topically administered HA (CFH, n = 24); (2) conventional frenectomy with placebo gel (CFP, n = 24); (3) frenectomy performed by diode laser with 0.6% topically administered HA (DLH, n = 24); and (4) frenectomy performed by diode laser with placebo gel (DLP, n = 24). HA application was continued for 1 week thrice daily after the frenectomy. Visual analog scale forms were collected from patients 1 week after the operation. In addition, the plaque index, gingival index, periodontal probing depth, and keratinized tissue width and thickness were recorded. This process was repeated 1 and 3 months after the first visit. The DLH group revealed significant differences in the probing depth, bleeding on probing, keratinized gingiva width, and attached gingiva width according to dual comparisons of the initial, first, and third-month values (p = 0.010, p = 0.007, p<0.001, and p = 0.001, respectively). Significant differences were observed between the CFP and CFH groups according to the initial and initial third-month values with regard to the bleeding on probing (p=0.019 and p = 0.019, respectively). The attached gingival thickness revealed significant differences between the CFP and CFH groups for the initial and initial-third-month comparisons (p = 0.005 and p = 0.007, respectively). The mean values of the initial and initial-third-month differences were significantly higher in the CFH group than those in the CFP group. HA- and laser-assisted labial frenectomies revealed better outcomes in terms of the probing depth, attached gingiva width, keratinized gingiva width, healing process, and postoperative comfort.

Arm design of band and loop space maintainer affects its longevity: a patient-specific finite element study.

Fixed space maintainers (FSMs) are commonly utilized in pediatric dentistry to prevent space loss following premature tooth extraction. Although previous studies have examined the survival rates and causes of FSM failure, the impact of arm design on failure has not been investigated. This study aimed to investigate the tensile and compressive stresses related to FSMs with different arm designs and evaluate the effect of arm designs on FSM failure. Cone beam computed tomography images of a child who experienced premature loss of a primary mandibular left second molar tooth were retrieved from our database, then processed and simulated using the Rhinoceros software. Finite element analysis was performed to evaluate the stresses on four distinct FSM arm designs under simulated chewing forces. The results showed that the straight-arm FSM design exhibited the highest von Mises principal stress, while FSMs with curved arms and surrounding primary mandibular left first molar in the mesial area demonstrated the lowest von Mises stress accumulation. Intense stress accumulation on the distal surface of tooth 74 was observed in the test models due to the transmitted forces by the FSM. The maximum principal stresses accumulated at the base of the alveolar socket of the mesial root of tooth 36, while the minimum principal stresses were identified at the mesio-marginal area of the alveolar crest. The arm design played a crucial role in enabling the appliance to effectively withstand the stresses accumulating on the Space maintainer (SM) and orthodontic band. Bending the SM arms to match the surrounding profile with curvature increased the stress absorption capacity by increasing the arm length.

Protective potential of different mouthguard thicknesses against perianaesthetic dental trauma: a patient specific-finite element study.

Perianaesthetic dental trauma is a common anaesthesia-related complication. Theprevious studies have shown a lack of knowledge regarding mouthguard usage and controversial results related to perianaesthetic dental trauma prevention. This study aimed to conduct a finite element analysis of the compressive and tensile stresses on the tooth-periodontal ligament-bone complex using custom-made mouthguards of different thicknesses and glass fibre splints to prevent perianaesthetic dental trauma. Custom-fitted ethylene-vinyl acetate mouthguards of two different thicknesses (2 and 3 mm) and glass fibre splint were modelled. A linear static finite element analysis was performed by applying a rigid Macintosh laryngoscope to the palatal surface of the maxillary central incisors at 150 N. The model without a mouthguard and glass fibre splint showed the highest stress values at the palatinal root surfaces during the impact. Increasing the mouthguard thickness significantly decreased the stress-strain values regardless of the presence of the glass fibre splint. Maximum stresses in the group using the 3 mm mouthguard were the lowest compared with the other groups.

Comparative effects of riboflavin, nicotinamide and folic acid on alveolar bone loss: A morphometric and histopathologic study in rats.

Introduction: Periodontitis is a chronic inflammatory and osteolytic disease. Vitamin B complex is a class of water-soluble vitamins that play important roles in cell metabolism. Objective: The aim of this study was to evaluate the effects of riboflavin (RBF), nicotinamide (NA), and folic acid (FA) on alveolar bone loss in experimental periodontitis rat model. Methods: Sixty-four male Wistar rats were randomly divided into the following eight groups: Control, Ligated, RBF50 (RBF, 50 mg/kg daily), NA50 (NA, 50 mg/kg daily), FA50 (FA, 50 mg/kg daily), RBF100 (RBF, 100 mg/kg daily), NA100 (NA, 100 mg/kg daily), and FA100 (FA, 100 mg/kg daily). Periodontitis was induced using silk ligature around the right first mandibular molar. After 11 days the rats were sacrificed. Mandible and serum samples were collected. Changes in alveolar bone levels were measured clinically, and periodontal tissues were examined histopathologically. Serum IL-1ß (pg/ml) levels were analyzed by using ELISA. Results: Mean alveolar bone loss in the mandibular first molar tooth revealed to be significantly lower in RBF100 group than in the Control group. In the Ligated group, alveolar bone loss was significantly higher than in all other groups. The ratio of presence of inflammatory cell infiltration in the Ligated group was significantly higher than in the Control group. The differences in the serum IL-1ß levels between the groups were not statistically significant. Osteoclasts that were observed in the Ligated group were significantly higher than those of the Control and FA100 groups. The osteoblastic activity in the Ligated group, RBF100, and NA100 groups were shown to be significantly higher than those in the Control group. Conclusion: This study has demonstrated that systemic administration of RBF, NA, and FA in different dosages (50­100 mg/kg) reduced alveolar bone loss in periodontal disease in rats.