RESUMO
To improve the heat resistance of titanium alloys, the effects of Y content on the precipitation behavior, oxidation resistance and high-temperature mechanical properties of as-cast Ti-5Al-2.75Sn-3Zr-1.5Mo-0.45Si-1W-2Nb-xY (x = 0.1, 0.2, 0.4) alloys were systematically investigated. The microstructures, phase evolution and oxidation scales were characterized by XRD, Laser Raman, XPS, SEM and TEM. The properties were studied by cyclic oxidation as well as room- and high-temperature tensile testing. The results show that the microstructures of the alloys are of the widmanstätten structure with typical basket weave features, and the prior ß grain size and α lamellar spacing are refined with the increase of Y content. The precipitates in the alloys mainly include Y2O3 and (TiZr)6Si3 silicide phases. The Y2O3 phase has specific orientation relationships with the α-Ti phase: (002)Y2O3 // (1¯1¯20)α-Ti, [110]Y2O3 // [4¯401]α-Ti. (TiZr)6Si3 has an orientation relationship with the ß-Ti phase: (022¯1¯)(TiZr)6Si3 // (011)ß-Ti, [1¯21¯6](TiZr)6Si3 // [044¯]ß-Ti. The 0.1 wt.% Y composition alloy has the best high-temperature oxidation resistance at different temperatures. The oxidation behaviors of the alloys follow the linear-parabolic law, and the oxidation products of the alloys are composed of rutile-TiO2, anatase-TiO2, Y2O3 and Al2O3. The room-temperature and 700 °C UTS of the alloys decreases first and then increases with the increase of Y content; the 0.1 wt.% Y composition alloy has the best room-temperature mechanical properties with a UTS of 1012 MPa and elongation of 1.0%. The 700 °C UTS and elongation of the alloy with 0.1 wt.% Y is 694 MPa and 9.8%, showing an optimal comprehensive performance. The UTS and elongation of the alloys at 750 °C increase first and then decrease with the increase of Y content. The optimal UTS and elongation of the alloy is 556 MPa and 10.1% obtained in 0.2 wt.% Y composition alloy. The cleavage and dimples fractures are the primary fracture mode for the room- and high-temperature tensile fracture, respectively.
RESUMO
X2CrNi12 ferritic stainless steel has a wide range of application prospects in the railway transportation, construction, and automobile fields due to its excellent properties. The properties of X2CrNi12 ferritic stainless steel can be further improved by cold-rolling and subsequent annealing treatment. The purpose of this work is to investigate the effect of cold-rolling reduction on the microstructure, texture and corrosion properties of the recrystallized X2CrNi12 ferritic stainless steel by using SEM, TEM, EBSD and electrochemical testing technology. The results show that the crystal orientation characteristics of the cold-rolled sheet could be inherited into the annealed sheet. The higher cold-rolling reduction could promote the deformed grains rotating into the {111}
RESUMO
Ti-Cu alloys have broad application prospects in the biomedical field due to their excellent properties. The properties of Ti-Cu alloys are strongly dependent on Cu content, microstructures, its Ti2Cu phase and its preparation process. The aim of this work is to investigate the effect of Cu content on the precipitation behaviors, mechanical and corrosion properties of the as-cast Ti-Cu alloys. The microstructures and phase evolution were characterized by SEM and TEM, and the properties were studied by tensile and electrochemical test. The results show that the volume fraction of Ti2Cu phase increases with the increase of Cu content. The Ti2Cu phase presents a variety of microscopic morphologies with different Cu content, such as rod, granular, lath and block shaped. The crystal orientation relationships between the Ti2Cu and α-Ti matrix in Ti-4Cu and Ti-10Cu alloys are (103)Ti2Cu//(0[11¯11)α-Ti, [3¯01]Ti2Cu//[21¯1¯0]α-Ti, and (103)Ti2Cu//(0002)α-Ti, [3¯31]Ti2Cu//[12¯10]α-Ti, respectively. The tensile strength, Vickers hardness and Young's modulus of the Ti-Cu alloys increase with the increase of Cu content, whereas the elongation decreases. The fracture morphologies of these alloys reveal ductile, ductile-brittle hybrid, and cleavage brittle mode, respectively. The corrosion resistance of the Ti-Cu alloys in SBF solution can be described as: Ti-4Cu alloy > Ti-10Cu alloy > Ti-7Cu alloy. The volume fraction of Ti2Cu phases and the "protective barrier" provided by the fine lath Ti2Cu phases strongly affected the electrochemical performances of the alloys.
RESUMO
The cyclic oxidation behaviors of the as-cast Ti-1100-xNb (x = 0.5, 1.0, 1.5, 2.0) alloys exposed at 650 °C for up to 100 h were systematically investigated. The aim of this work is to explore the in-depth oxidation mechanism by using the oxidation kinetics and the structure of the oxide products. The oxidation kinetics were determined by thermogravimetrically, and the microstructure and composition of the oxidation scale were studied by using XRD and SEM. The results demonstrate that Nb can significantly improve the oxidation resistance. However, the average weight gains of the alloys decrease firstly and then increase with the increase of Nb content. The oxidation kinetics obeys a parabolic model. The Ti-1100-1.0Nb alloy has the lowest kp value, which is 5.7 10-13 g2cm-4s-1. The surface oxidation products are mainly composed of massive or acicular rutile-TiO2, TixO (x = 3, 6), NbO2 and Al2O3. Besides, Al2(MoO4)3 oxide is also presented on the oxidation surface of the Ti-1100-1.5Nb alloys. Ti-1100-1.0Nb alloy shows the best oxidation resistance property revealed by combining weight gains and EDS-SEM element content profiles analysis. The interaction of Nb, O, Ti, and other elements retarded the diffusion of O atoms into the alloys, which improves the oxidation resistance.