A simple isocratic LC method for quantification of trace-level inorganic degradation impurities (ferricyanide, ferrocyanide, nitrite, and nitrate) in sodium nitroprusside injection and robustness by quality using design approach.

This study developed and validated a trace-level quantification inorganic impurities method using reversed-phase HPLC and performed the robustness check using quality-by-design approach by varying the multiple factors simultaneously. This method is economical and simple and exhibits its stability-indicating nature [for the determination of ferrocyanide ([Fe(CN)6]4- ), ferricyanide ([Fe(CN)6 ]3- ), nitrate (NO3 - ), and nitrite (NO2 - )] in sodium nitroprusside (SNP) drug substance and liquid dosage form. Chromatographic separation was achieved using a USP L43 column (ACE PFP, 150 × 4.6 mm, 3 µm) with a simple isocratic elution. The buffer consists of potassium dihydrogen phosphate (50 mM), tetrabutylammonium hydrogen sulfate (9 mM), and tetrabutylammonium hydroxide (25 mM). The buffer pH was adjusted to 7.2 with tetrabutylammonium hydroxide. The mobile phase was mixed with the buffer and acetonitrile (68:32 v/v). The flow rate was 0.8 mL/min, column temperature was maintained at 30°C, and injection volume was 5.0 µL. The SNP impurities were monitored at 225 nm using a UV detector. Further, the method was validated per the International Council for Harmonisation (ICH) guidelines, and forced degradation studies were carried out under different stress conditions. The detector responses were plotted against concentrations, and correlation was linear (r > 0.999) over the range of 0.8-7.5 µg/mL for ferricyanide; 1.0-37.5 µg/mL for SNP; and 0.2-7.5 µg/mL for ferrocyanide, nitrite, and nitrate. The method repeatability was established for all the impurities with relative standard deviation (%), and the results were found to be less than 2.0.

A validated stability-indicating reversed-phase-HPLC method for dipyridamole in the presence of degradation products and its process-related impurities in pharmaceutical dosage forms.

In this study, we developed and validated a method to determine dipyridamole-related impurities in pharmaceutical dosage forms using the reversed-phase-HPLC technique. All impurities were separated on a YMC pack C8 (150 mm × 4.6 mm, 3.0 µm) analytical column using a suitable mobile phase. Mobile phase A was 10 mM concentration of phosphate buffer (pH adjusted to 4.7 by adding diluted orthophosphoric acid) and mobile phase B was buffer:acetonitrile:methanol (at the ratio of 30:40:30 v/v). The optimized chromatographic conditions used in the experiment were as follows: flow rate, 1.0 mL/min; injection volume, 10 µL and column temperature, 35°C. Chromatographic detection was performed at 295 nm. The stressed samples were analyzed for degradation under acidic, basic, peroxide, water hydrolysis, and physical degradation conditions. The proposed method was validated according to International Conference on Harmonization (ICH) guidelines, and found to be specific, linear, accurate and have a robust stability-indicating nature. The method showed excellent linearity from limit of quantification (LOQ) to 150% level of concentrations for all impurities. The correlation coefficient (r2 ) for all impurities was between 0.995 and 0.999. The recovery study was performed from LOQ to 150% level concentrations, with mean recovery values between 92.9% and 103.2%, respectively. The developed method can be used to determine dipyridamole and its relative impurities. The degradation and validated study results indicate its stability-indicating nature. Therefore, the method can be used in pharmaceutical research and development and quality control departments.

Stability-indicating reversed-phase-HPLC method development and validation for sacubitril/valsartan complex in the presence of impurities and degradation products: Robustness by quality-by-design approach.

According to current regulatory guidelines, a stability-indicating method has been developed to determine the impurities in sacubitril (SCB) and valsartan (VLS) tablet dosage forms and perform robustness studies using the design of experiments approach. The present study was initiated to understand quality target product profile, analytical target profile, and risk assessment for method variables that affect the method response. A reversed-phase-HPLC system was equipped with a Phenomenex Gemini-NX C18 column (150 × 4.6 mm, 3 µm) and a photo diode array detector. A gradient mobile phase was used in this research work. The detection was performed at 254 nm; the flow rate was 1.5 mL/min, and the column temperature was maintained at 30°C. The proposed method was validated per the International Council for Harmonisation Q2 (R1) guidelines. The coefficient of correlation was >0.999 for all impurities. The limits of detection and quantification were evaluated for SCB, VLS, and all impurities. The precision and accuracy were obtained for SCB, VLS, and their related impurities. Intra- and inter-day relative standard deviation values were less than 10.0%, and the recoveries of impurities varied between 90.0 and 115.0%. Based on the validation results, the proposed DoE method can estimate SCB and VLS impurities in the finished dosage form.

Development and validation of a RP-UPLC method for the determination of betamethasone dipropionate impurities in topical formulations using a multivariate central composite design.

The current study presents a specific, accurate, simple, and rapid UPLC method for the determination of impurities present in cream and ointment formulations of betamethasone dipropionate (BMD). The analytical method was optimized using central composite design (CCD) prior to the method validation. Critical Process Parameters (CPPs) and Critical Quality Attributes (CQAs) were identified for the analytical method. A total of 17 experiments were carried out and verified the individual and interaction effects of CPPs. The CPPs were optimized using a numerical method by keeping the CQAs within the desired range (R1-R2: minimize & R3-R5: maximize) as an optimization goal. Optimized chromatographic separation was achieved using a Waters Acquity UPLC BEH C18, 100 mm × 2.1 mm, 1.7 µm column with a gradient mode of elution comprising 20 mM phosphate buffer: ACN 70 : 30, v/v as mobile phase-A and 20 mM phosphate buffer: ACN 30 : 70, v/v as mobile phase-B. The developed method was validated in accordance with ICH guidelines. The validation data conclude that the developed method is specific, accurate, linear, precise, rugged, and robust for the quantification of impurities in BMD topical formulations.

A simple and rapid HPLC method for determination of parabens and their degradation products in pharmaceutical dosage forms.

A stability-indicating HPLC method was developed for the simultaneous determination of paraben mixture and its degradation products in effervescent potassium chloride tablets. The chromatographic separation was achieved on a Waters Cortecs C18 column (2.7 µm, 4.6 × 150 mm) using gradient elution. The optimized mobile phase consisted of 0.1% orthophosphoric acid in purified water as solvent A and purified water, acetonitrile, and orthophosphoric acid (100:900:1, v/v) as solvent B. The flow rate was 0.8 mL/min, and column temperature was maintained at 35°C. The injection volume was 10 µL, and UV detection was carried out at 254 nm. The selectively developed method has optimal separation among p-hydroxybenzoic acid, methylparaben, ethylparaben, propylparaben, and butylparaben peaks in the presence of specified and unspecified degradation products in the determination of drug product. The mass balance obtained from forced degradation studies was ≥95% and thus proves the stability-indicating property of the developed method. The developed reversed-phase HPLC method has been validated according to the International Conference on Harmonization guidelines. The correlation coefficients for all the peaks were >0.9999. The results of the other validation parameters were found within the limits. Finally, the optimized method was used in the quality control lab for stability analysis.

Low-level determination of 4-chlorobutyl-(S)-[4-chloro-2-(4-cyclopropyl-1,1,1-trifluoro-2-hydroxy-but-3yn-2-yl)phenyl] carbamate (4-CTHC) in efavirenz drug substance by LC-MS.

A rapid, simple, sensitive, and selective liquid chromatography-tandem mass spectrometry (LC-MS) test method was developed and validated for the trace level determination of 4-chlorobutyl-(S)-[4-chloro-2-(4-cyclopropyl-1,1,1-trifluoro-2-hydroxy-but-3yn-2-yl)phenyl] carbamate (4-CTHC). 4-CTHC is a potential genotoxic impurity in efavirenz drug substance and the acceptable level is 2.5 µg ml-1 with respect to analyte concentration according to ICH M7(R1) Multidisciplinary Guidelines M7(R1). The LC-MS/MS analysis of 4-CTHC impurity was carried out on a Kinetex C18 (150 × 4.6 mm, 5.0 µm) column. In this test procedure, the mobile phase was prepared with buffer (0.1% formic acid in water) and acetonitrile in the ratio of 1:3 (v/v). The method set flow rate was 0.4 ml min-1 . The method was developed with a short run time of <10 min. Selective ion monitoring acquisition mode and negative polarity electrospray ionization mode were used as an MS method to quantify genotoxic impurities at 422.25 Da. The method showed linearity in a range of 0.64-3.71 µg ml-1 with a correlation coefficient of 0.9992. The RSD for intra-day and inter-day precision was found to be <5%. The method's accuracy was in the range of 106.5-112.4% for the genotoxic impurity of 4-CTHC. The procedure was validated as per the current ICH Q2 (R1) guidelines and proved suitable for stability testing in the quality control laboratory for pharmaceutical preparations.

Quality by design with design of experiments approach for development of a stability-indicating LC method for enzalutamide and its impurities in soft gel dosage formulation.

A novel ultra-performance liquid chromatographic (UPLC) method has been developed and approved for the quantitative determination of enzalutamide (ENZ) and its impurities in drug product dosage form by applying the quality by design with design of experiments approach. An efficient chromatographic separation was achieved on a Waters ACQUITY CSH C18 (100 × 2.1 mm × 1.7 µm) column in gradient elution mode. A mixture of potassium phosphate monobasic buffer and acetonitrile (10 mm, adjusted to pH 4.0 with 1% orthophosphoric acid) at a flow rate of 0.2 mL min-1 (column temperature at 40°C) under ultraviolet detection at 270 nm was used for quantitation. The peak resolution among ENZ and its impurities (Impurity-1, Impurity-2, Impurity-3, Impurity-4, Impurity-5, Impurity-6 and Impurity-7) was greater than 2.5. Regression analysis confers an R2 value (correlation coefficient) higher than 0.999 for the active substance and impurities. The detection level for ENZ impurities was at a level below 0.015% (0.12 µg/mL). The accuracy levels for different compounds were close to 100%. The inter- and intra-day precisions for ENZ and impurities were evaluated and their relative standard deviation (%) values were less than 3.5. Our results show that the UPLC-UV stability-indicating method will be an essential tool that could determine the drug product's impurities and be useful in regular quality control and stability studies of the ENZ drug product dosage form.

Stability Indicating LC Method Development for Hydroxychloroquine Sulfate Impurities as Available for Treatment of COVID-19 and Evaluation of Risk Assessment Prior to Method Validation by Quality by Design Approach.

A quality by design-based stability indicating HPLC method has been developed for hydroxychloroquine sulfate impurities. The optimized HPLC method can detect and quantify the hydroxychloroquine sulfate and related organic impurities in pharmaceutical solid oral dosage forms. Nowadays, for the quantification of impurities in drug products demands more comprehensive way of analytical method development. The quality by design approach allows the assessment of different analytical parameters and their effects with minimum number of experiments. A highly sensitive and stability indicating RP-HPLC method was developed and evaluated the risk assessment prior to method validation. The chromatographic separation was achieved with X-terra phenyl column (250 × 4.6 mm, 5 µm) using phosphate buffer (0.3 M and pH 2.5). The gradient method flow rate was 1.5 mL min-1 and UV detection was made at 220 nm. The calibration curve of hydroxychloroquine sulfate and related impurities were linear from LOQ to 150% and correlation coefficient was found more than 0.999. The precision and intermediate precision % RSD values were found less than 2.0. In all forced degradation conditions, the purity angle of HCQ was found less than purity threshold. The optimized method found to be specific, accurate, rugged, and robust for determination of hydroxychloroquine sulfate impurities in the solid oral dosage forms. Finally, the method was applied successfully in quality control lab for stability analysis.

A Novel RP-HPLC-DAD Method Development for Anti-Malarial and COVID-19 Hydroxy Chloroquine Sulfate Tablets and Profiling of In-Vitro Dissolution in Multimedia.

Hydroxychloroquine sulfate is one of a large series of 4-aminoquinolines with antimalarial activity. Moreover, it is used for the treatment of rheumatoid arthritis. Sometimes Hydroxychloroquine sulfate is very effective for the treatment of autoimmune diseases. Based on the recent clinical experiments it is exploiting for the treatment of COVID-19, corona virus across the globe. A Reverse phase RP-HPLC method have been developed and validated as per the current ICH guidelines for estimation of Hydroxychloroquine sulfate tablets. As part of method validation specificity, linearity, precision and recovery parameters were verified. The concentration and area relationships were linear (R2 > 0.999), over the concentration range of 25 to 300 µg mL-1 for HCQ. The relative standard deviations for precision and intermediate precision were less than 1.5%. The proposed RP-HPLC generic method was applied successfully for evaluation of invitro dissolution profile with different pH conditions like 0.1N HCl, pH 4.5 Acetate buffer and pH 6.8 Phosphate buffers of US marketed reference product.

QbD based development of HPLC method for simultaneous quantification of Telmisartan and Hydrochlorothiazide impurities in tablets dosage form.

A simple reverse phase liquid chromatographic gradient method has been developed and validated for the simultaneous determination of specified & un-specified impurities of Telmisartan and Hydrochlorothiazide in combination oral solid dosage forms. The developed method is effective to separate a total of sixteen (16) peaks and quantify eleven (11) specified impurities of Telmisartan and three (3) specified impurities of Hydrochlorothiazide with a minimum chromatographic resolution of 2.5. The separation was acquired with Inertsil ODS-3V, 150 â€‹× â€‹4.6 â€‹mm, 3.5 â€‹µm column at a flow rate of 1.0 mL min-1 with the mobile phase-A consists of 0.02 â€‹M potassium dihydrogen phosphate (pH of 3.5) and mobile phase-B consists of a mixture of Milli-Q water and acetonitrile (100: 900 v/v) respectively. The detection of impurities was carried out at 230 â€‹nm and column temperature was maintained at 40 â€‹°C. Further optimized chromatographic conditions were applied to design of experiments to find out the critical quality attributes and established the design space. The binary combination of drug product was subjected to the different stress conditions such as acid, base, oxidation, heat and photolysis as per the recommendations of international conference on harmonization (Q2). The degradation Product found in stress patterns are well separated among main analyte compounds. The method was validated to be specific, robust and rugged in terms of change of chromatographic, instrumental and technical variables.

A novel RP-HPLC refractive index detector method development and validation for determination of trace-level alcohols (un-sulfated) in sodium lauryl sulfate raw material.

The main aim of the study is to develop and validate a simple and rapid liquid chromatographic analytical method for simultaneous determination of trace level of un-sulfated alcohol impurities in sodium lauryl sulfate using high-performance liquid chromatography with a refractive index detector. The chromatographic separation was achieved using flow rate of 3.0 ml/min with a Waters Symmetry C18 (150 × 4.6 mm, 5 µm) column and 50°C as a column temperature. The mobile phase comprised milliQ water and acetonitrile in the ratio of 30:70 v/v respectively. The detection was performed using a refractive index detector at a sensitivity of 64. The resolutions among n-decanol, n-dodecanol, n-tetradecanol, n-hexadecanol, and n-heptadecanol were found to be >4. Regression analysis showed a correlation coefficient for the stated compounds of >0.999. The validated HPLC method was utilized effectively for the estimation of un-sulfated alcohols in quality control labs for commercial release of sodium lauryl sulfate.

In vitro Dissolution Profile at Different Biological pH Conditions of Hydroxychloroquine Sulfate Tablets Is Available for the Treatment of COVID-19.

Hydroxychloroquine sulfate is one of an extensive series of 4-aminoquinolines with antimalarial activity. Moreover, it is used for the treatment of rheumatoid arthritis. Sometimes, hydroxychloroquine sulfate is beneficial for the treatment of autoimmune diseases. Based on recent clinical experiments, it is exploited for the treatment of COVID-19, coronavirus across the globe. The chromatogram separation was achieved by using Agilent, Zorbax C8, 250 mm × 4.6 mm i.d., column. The buffer consists of 0.01 M of 1-pentane sulfonic acid and 0.02% of orthophosphoric acid in purified water. Mixed buffer, acetonitrile, and methanol (800:100:100 v/v). The flow rate was 1.0 ml min-1, and injection volume was 10 µl. Detection was made at 254 nm by using a dual absorbance detector (DAD). The reversed-phase high-performance liquid chromatography (RP-HPLC) method has been developed and validated as per the current International Conference on Harmonization (ICH) guidelines to estimate hydroxychloroquine sulfate tablets. As part of method validation, specificity, linearity, precision, and recovery parameters were verified. The concentration and area relationships were linear (R 2 > 0.999) over the concentration range of 25-300 µg ml-1 for hydroxychloroquine (HCQ). The relative standard deviations for precision and intermediate precision were <1.5%. The proposed RP-HPLC generic method was applied successfully to evaluate the in vitro dissolution profile with different pH conditions such as 0.1 N HCl, pH 4.5 acetate buffer, and pH 6.8 phosphate buffers as US-marketed reference products.

Stability-indicating RP-HPLC method development and validation for determination of nine impurities in apixaban tablet dosage forms. Robustness study by quality by design approach.

A quality by design (QbD) based high-resolution HPLC method is described for determination of impurities in apixaban (APX) in the tablet dosage form. Employing a simple and stability-indicating HPLC method, nine known impurities were quantified with good peak resolution. Mobile phase A (MP-A) was prepared with buffer and acetonitrile 90:10 v/v, while mobile phase B (MP-B) contained water and acetonitrile 10:90 v/v. The gradient program was 0 min, MP-A 75%, B 25%; 20 min, MP-A 65%, B 35%; 30 min, MP-A 40%, B 60%; 40min, MP-A 40%, B 60%; 42 min, MP-A 75%, B 25%; and 50 min, MP-A 75%, B 25%. The chromatographic separation was achieved using a Zorbax RX C18 250 × 4.6 mm column, 5 µm (1.0 ml min-1 , 280 nm, 50 µl) and a column temperature of 40°C. Several separation studies were carried out using design of experiments to optimize the method. Validation results confirm the applicability of the developed method for quality analysis and stability studies of the regular product on the manufacturing stream.

QbD-based development of an extraction procedure for simultaneous quantification of telmisartan, amlodipine besylate and chlorthalidone in combination complex matrix formulation.

The main objective of this study was to establish an efficient extraction procedure for the estimation of telmisartan, amlodipine and chlorthalidone from their combination in sample matrix using an analytical quality by design approach. Initial screening studies were performed for optimization of a suitable diluent to extract active components from sample matrix. Further, the same study was extended for the identification of critical method attributes and the factors affecting the analytical target profile. This study also explains the rugged and robust quantitative determination of combinations drugs with a shorter run time. The design of experimental studies confirms that the current center point parameters are well suited to recoveries. The chromatographic separation was achieved with an X-Terra RP8, 150 × 4.6 mm, 3.5 µm column with an isocratic mobile phase (mixture of 20 mm aqueous ammonium acetate and acetonitrile). To demonstrate the stability-indicating nature of the optimized method, forced degradation studies were conducted and proved. The optimized method was validated according to International Conference on Harmonization guidelines.

Development and validation of a generic RP-HPLC PDA method for the simultaneous separation and quantification of active ingredients in cold and cough medicines.

A novel generic reverse phase high performance liquid chromatography (RP-HPLC) method is developed and validated for simultaneous determination of seven pharmaceutically active ingredients, namely, acetaminophen, dextromethorphan, doxylamine, phenylephrine, guaifenesin, caffeine and aspirin. All seven ingredients were quantified in soft gel, syrup and tablet formulations of the over-the-counter US-marketed products, as per the guidelines of the International Conference on Harmonization. The separation was achieved in a 16 min run time on an Agilent Zorbax Phenyl column using a gradient method with two mobile phases. Mobile phase A was 0.15% trifluoro acetic acid in purified water and while mobile phase B was a mixture of acetonitrile and methanol (750:250 v/v) with 0.02% trifluoro acetic acid. The flow rate was 1.0 mL min-1 and injection volume was 10 µL. Detection was performed at 280 nm using a photodiode array detector. As part of the method validation, specificity, linearity, precision and recovery parameters were verified. The concentration and area relationships were linear (R2 > 0.999), over the concentration ranges 20-120 µg mL-1 for acetaminophen, 75-450 µg mL-1 for dextromethorphan, 31.25-187.5 µg mL-1 for doxylamine, 25-150 µg mL-1 for phenylephrine, 25-150 µg mL-1 for aspirin, 6.5-39 µg mL-1 for caffeine and 12-72 µg mL-1 for guaifenesin. The relative standard deviations for precision and intermediate precision were <1.5%. The proposed RP-HPLC generic method is applicable for routine analysis of cold and cough over-the-counter products.

Stability-indicating HPLC method for simultaneous quantification of 14 impurities in excedrin tablet formulations and identification of new impurity by LC-MS in accelerated stability studies.

We developed novel stability-indicating HPLC method for simultaneous estimation of 14 impurities in excedrin tablet, a formulation with a combination of acetaminophen, aspirin, and caffeine. In addition, a new impurity that was generated through degradation of aspirin at high temperatures during the accelerated stability conditions was positively identified and confirmed, using liquid chromatography-mass spectrometry technique. The HPLC method was optimized using the Inertsustain C18 , 250 × 4.6 mm, 5.0 µm column, employing simple gradient method. Forced degradation studies were performed under acidic, basic, oxidative and thermal conditions to prove the scope and stability-indicating the nature of the method. The optimized method was validated as per the International Conference on Harmonization guidelines. The HPLC method showed linearity from LOQ concentration to 21 µg mL-1 . Precision and intermediate precision values were <5% RSD. The validated HPLC method is currently applied for the routine testing of excedrin tablet formulations in quality control laboratories.