RESUMO
BACKGROUND: This study aimed to compare the soft tissue effects of Herbst appliance in Class II malocclusion patients treated in three different craniofacial growth phases: prepubertal (PRE), circumpubertal (CIR), and postpubertal (POS). METHODS: In total, 95 patients with Class II Division 1 malocclusion previously treated with a Herbst appliance were analyzed. Through the cervical vertebral maturation stages method, patients were allocated into three groups depending on the growth craniofacial phase at the beginning of treatment: PRE, CIR, and POS. Seventeen cephalometric measures were evaluated from each lateral radiograph before and after Herbst therapy using the Radiocef 2 software (Radio Memory, Belo Horizonte). Intragroup and intergroup treatment changes were compared statistically using a paired t test and MANOVA test, respectively. RESULTS: Soft tissue thickness changes were related only to mandible; all three mandibular measurements (L1_LL, B_B', and Pog_Pog') showed thickening for the PRE group ranging from 0.92 mm (Pog_Pog') to 2.02 mm (B_B'), and only lower lip thickened overtime for the POS group (L1_LL = 0.99 mm). Soft and hard tissue pogonion displaced anteriorly, but only the soft tissue showed differences among groups; PRE group presented more anterior displacement than POS group (3.61 mm and 1.39 mm, respectively). Hard and soft tissue facial convexity decreased more in the PRE and CIR groups than in the POS group. Mentolabial sulcus depth reduced more in the PRE (1.07 mm) and CIR (1.29 mm) groups than in the POS (0.55 mm) group. Horizontal movement of the skeletal and soft pogonion presented a moderate-high positive correlation (r = 0.783), and hard and soft facial convexity showed a moderate-low positive correlation (r = 0.403). CONCLUSIONS: Herbst appliance therapy produces soft tissue improvements in the three phases of craniofacial growth, being greater in patients in the PRE and CIR phases.
Assuntos
Má Oclusão Classe II de Angle , Aparelhos Ortodônticos Funcionais , Humanos , Resultado do Tratamento , Face , Mandíbula/diagnóstico por imagem , Má Oclusão Classe II de Angle/diagnóstico por imagem , Má Oclusão Classe II de Angle/terapiaRESUMO
Objective: Individuals with syndromic craniosynostosis present alterations in the dental arches due to anomalies caused by the early fusion of the craniomaxillary sutures. This study aimed to compare intradental and interdental dimensions between individuals with Apert and Crouzon syndromes and nonsyndromic controls. Materials and Methods: Digital models were obtained from the archive of a public tertiary care hospital. The sample consisted of 34 patients (Apert n = 18, Crouzon n = 16) and 34 nonsyndromic controls matched for gender and age. Measurements of perimeter, length, intercanine and intermolar distances (upper and lower), overjet, and molar ratio were performed. Statistical comparisons were performed using ANOVA and Tukey tests (p < 0.05). Results: Patients with Apert and Crouzon syndromes have severely reduced maxillary transverse dimensions, perimeter, and length of the upper arch compared to the control group (p < 0.001). The lower arch is less impacted. Patients with Apert syndrome had an anterior crossbite (p < 0.001), while patients with Crouzon syndrome had an edge-to-edge bite (p < 0.011). Patients with Apert and Crouzon syndromes do not have serious transverse proportion problems when comparing the upper and lower arches. Conclusions: In this sample, both the Apert and Crouzon groups have severely compromised upper arches compared to the control group. Mild dentoalveolar expansion in the maxilla should be sufficient for the transverse adaptation of the dental arches before frontofacial advancement.
RESUMO
OBJECTIVES: To compare the time to close extraction spaces between en masse (ER) and two-step retraction (TSR). MATERIALS AND METHODS: Forty-eight patients with bimaxillary protrusion underwent treatment with extraction of four first premolars. All patients were randomly allocated to one of two groups: ER (n = 24) or TSR (n = 24). The main outcome was the time required to close spaces between ER and TSR; the closing time of spaces between females and males was a secondary outcome. The size of premolars was measured on the models and data were collected on clinical records at the following times: retraction start date (T1) and space closure completion date (T2). The total time to close the extraction spaces was calculated for each extracted premolar (T1 to T2). The Kaplan Meier method and the Log-Rank test were used to compare the groups. RESULTS: The time to close extraction spaces showed significant differences between the ER and TSR groups. While ER took between 12.1 and 13.8 months, TSR took between 24.7 and 26.8 months. The TSR group showed a significant difference between sexes; male patients took 5.5 months longer than female patients for the extraction spaces to close. CONCLUSIONS: TSR takes between 1.8 and 2.2 times longer than ER to close the extraction spaces and it took longer in males than females.
Assuntos
Procedimentos de Ancoragem Ortodôntica , Técnicas de Movimentação Dentária , Dente Pré-Molar , Cefalometria , Feminino , Humanos , Masculino , Estudos ProspectivosRESUMO
The objective of this research was to compare the effect single low-level laser therapy (LLLT) irradiation on pain perception in patients having fixed appliance treatment in the clinic of orthodontics. Sixty-two patients were recruited to participate in this randomized, double-blinded, placebo-controlled study. The patients were assigned to four groups: group I-laser on the right side; group II-placebo on the right side; group III-laser on the left side; group IV-placebo on the left. The laser or placebo was applied before separation, 24 and 48 h after separation of their first permanent molars in the lower arch. Just after the separation, the average of the pain for the placebo group was 1.6, significantly greater than the average of 1.1 registered for the laser group (p = 0.013). After 24 h and before the new irradiation, the values registered among the different groups did not show any differences. In relation to the gender, only after the first irradiation in placebo group, the female had a level of pain (0.1) significantly higher (p = 0.04) compared to male, and after 48 h, the group where the laser was applied had a difference (p = 0.04) among the gender with a value of lower pain for men (0.6) than for women (1.6).The laser irradiation to minimize the pain was only effective when applied immediately after treatment and separation. In general way, there were no differences between the genders, except after the first placebo group irradiation in which the female had a significantly higher level of pain compared to male and after 48 h. The pain cycle observed in this study had its peak in 24 h, both for laser's and placebo's group.
Assuntos
Terapia com Luz de Baixa Intensidade , Ortodontia , Dor/cirurgia , Método Duplo-Cego , Feminino , Humanos , Masculino , Aparelhos Ortodônticos Fixos , Medição da Dor , Percepção da Dor , Adulto JovemRESUMO
Surgical procedure for removal of impacted teeth is a challenge for clinicians as it involves accuracy in the diagnosis and localization of the dental elements. The cone-beam computed tomography (CBCT), compared to the conventional radiography, has a greater potential to provide complementary information because of its three-dimensional (3D) images, reducing the possibility of failures in surgical procedures. Two 10-year-old boys presented with aesthetic issues associated with the juxtaposition of ectopic teeth with the permanent ones. Both two-dimensional and 3D preoperative radiographic diagnostic sets were produced. The occlusal and panoramic radiographs were not enough for proper localization of impacted incisors. Thus, the CBCT was used as a surgical guide. After 2 years of longitudinal following, no lesion was recorded, and the orthodontic treatment has proven successful. In all cases, CBCT contributed to both diagnosis and correct localization of supernumerary teeth, aiding the professional in the treatment planning, and consequently in the clinical success. The surgeries were completely safe, avoiding damage in noble structures, and providing a better recovering of the patients.
RESUMO
INTRODUCTION: Lateral cephalometric radiographs are traditionally required for orthodontic treatment, yet rarely used to assess asymmetries. OBJECTIVE: The objective of the present study was to use lateral cephalometric radiographs to identify existing skeletal and dentoalveolar morphological alterations in Class II subdivision and to compare them with the existing morphology in Class I and II relationship. MATERIAL AND METHODS: Ninety initial lateral cephalometric radiographs of male and female Brazilian children aged between 12 to 15 years old were randomly and proportionally divided into three groups: Group 1 (Class I), Group 2 (Class II) and Group 3 (Class II subdivision). Analysis of lateral cephalometric radiographs included angular measurements, horizontal linear measurements and two indexes of asymmetry that were prepared for this study. RESULTS: In accordance with an Index of Dental Asymmetry (IDA), greater mandibular dental asymmetry was identified in Group 3. An Index of Mandibular Asymmetry (IMA) revealed less skeletal and dental mandibular asymmetry in Group 2, greater skeletal mandibular asymmetry in Group 1, and greater mandibular dental asymmetry in Group 3. CONCLUSION: Both IDA and IMA revealed greater mandibular dental asymmetry for Group 3 in comparison to Groups 1 and 2. These results are in accordance with those found by other diagnostic methods, showing that lateral cephalometric radiography is an acceptable method to identify existing skeletal and dentoalveolar morphological alterations in malocclusions.
Assuntos
Cefalometria/métodos , Assimetria Facial/diagnóstico por imagem , Má Oclusão Classe II de Angle/diagnóstico por imagem , Má Oclusão Classe I de Angle/diagnóstico por imagem , Adolescente , Processo Alveolar/diagnóstico por imagem , Criança , Queixo/diagnóstico por imagem , Arco Dental/diagnóstico por imagem , Assimetria Facial/classificação , Ossos Faciais/diagnóstico por imagem , Feminino , Humanos , Incisivo/diagnóstico por imagem , Masculino , Má Oclusão Classe II de Angle/classificação , Mandíbula/diagnóstico por imagem , Maxila/diagnóstico por imagem , Dente Molar/diagnóstico por imagem , Osso Nasal/diagnóstico por imagem , Palato/diagnóstico por imagem , Radiografia , Retrognatismo/classificação , Retrognatismo/diagnóstico por imagem , Sela Túrcica/diagnóstico por imagemRESUMO
INTRODUCTION: This study assessed the three-dimensional changes in the dental arch of patients submitted to orthodontic-surgical treatment for correction of Class II malocclusions at three different periods. METHODS: Landmarks previously identified on upper and lower dental casts were digitized on a three-dimensional digitizer MicroScribe-3DX and stored in Excel worksheets in order to assess the width, length and depth of patient's dental arches. RESULTS: During orthodontic preparation, the maxillary and mandibular transverse dimensions measured at the premolar regions were increased and maintained throughout the follow-up period. Intercanine width was increased only in the upper arch during orthodontic preparation. Maxillary arch length was reduced during orthodontic finalization, only. Upper and lower arch depths were stable in the study periods. Differences between changes in centroid and gingival points suggested that upper and lower premolars buccaly proclined during the pre-surgical period. CONCLUSIONS: Maxillary and mandibular dental arches presented transverse expansion at premolar regions during preoperative orthodontic preparation, with a tendency towards buccal tipping. The transverse dimensions were not altered after surgery. No sagittal or vertical changes were observed during the follow-up periods.
Assuntos
Arco Dental/patologia , Imageamento Tridimensional/métodos , Má Oclusão Classe II de Angle/terapia , Ortodontia Corretiva/métodos , Procedimentos Cirúrgicos Ortognáticos/métodos , Adolescente , Adulto , Pontos de Referência Anatômicos/patologia , Dente Pré-Molar/patologia , Cefalometria/métodos , Dente Canino/patologia , Arco Dental/cirurgia , Feminino , Seguimentos , Humanos , Processamento de Imagem Assistida por Computador/métodos , Masculino , Má Oclusão Classe II de Angle/cirurgia , Mandíbula/patologia , Mandíbula/cirurgia , Maxila/patologia , Maxila/cirurgia , Modelos Dentários , Dente Molar/patologia , Osteotomia de Le Fort/métodos , Osteotomia Sagital do Ramo Mandibular/métodos , Estudos Retrospectivos , Adulto JovemRESUMO
Extensive intraosseous lesions represent a clinical challenge for the periodontist. Sites with bone defects have been shown to be at higher risk of periodontitis progression in patients who had not received periodontal therapy. Thus, the aim of this case report was to describe a novel approach for the treatment of 1-walled intraosseous defect by combining nonsurgical periodontal therapy and orthodontic movement toward the bone defect, avoiding regenerative and surgical procedures. A 47-year-old woman underwent the proposed procedures for the treatment of her left central incisor with 9 mm probing depth and 1-walled intraosseous defect in its mesial aspect. Initially, basic periodontal therapy with scaling and root planning was accomplished. Two months later, an orthodontic treatment was planned to eliminate the intraosseous lesion and to improve the interproximal papillary area. Orthodontic root movement toward the osseous defect was performed for 13 months with light forces. After 6 years postoperative it was concluded that combined basic periodontal therapy and orthodontic movement was capable of eliminating the intraosseous defect and improve the esthetics in the interproximal papillary area between the central incisors.
RESUMO
INTRODUCTION: Due to the lack of studies that distinguish between dentoalveolar and basal changes caused by the Thurow appliance, this clinical study, carried out by the School of Dentistry--State University of São Paulo/Araraquara, aimed at assessing the dental and skeletal changes induced by modified Thurow appliance. METHODS: The sample included an experimental group comprising 13 subjects aged between 7 and 10 years old, with Class II malocclusion and anterior open bite, and a control group comprising 22 subjects similar in age, sex and mandibular plane angle. Maxillary/mandibular, horizontal/vertical, dental/skeletal movements (ANS, PNS, U1, U6, Co, Go, Pog, L1, L6) were assessed, based on 14 landmarks, 8 angles (S-N-ANS, SNA, PPA, S-N-Pog, SNB, MPA, PP/MPA, ANB) and 3 linear measures (N-Me, ANS-Me, S-Go). RESULTS: Treatment caused significantly greater angle decrease between the palatal and the mandibular plane on the experimental group, primarily due to an increase in the palatal plane angle. ANB, SNA and S-N-ANS angles significantly decreased more in patients from the experimental group. PNS was superiorly remodeled. Lower face height (ANS-Me) decreased in the experimental group and increased in the control group. CONCLUSIONS: The modified Thurow appliance controlled vertical and horizontal displacements of the maxilla, rotated the maxilla and improved open bite malocclusion, decreasing lower facial height.
Assuntos
Aparelhos de Tração Extrabucal , Má Oclusão Classe II de Angle/terapia , Mordida Aberta/terapia , Desenho de Aparelho Ortodôntico , Processo Alveolar/patologia , Pontos de Referência Anatômicos/patologia , Estudos de Casos e Controles , Cefalometria/métodos , Criança , Queixo/patologia , Feminino , Seguimentos , Humanos , Incisivo/patologia , Masculino , Má Oclusão Classe II de Angle/patologia , Mandíbula/patologia , Côndilo Mandibular/patologia , Maxila/patologia , Dente Molar/patologia , Osso Nasal/patologia , Mordida Aberta/patologia , Técnica de Expansão Palatina/instrumentação , Palato/patologia , Estudos Retrospectivos , Rotação , Sela Túrcica/patologia , Técnicas de Movimentação Dentária/instrumentação , Dimensão VerticalRESUMO
Dr. Peter Buschang is regent professor and director of orthodontic research. He has been at Texas A&M University Baylor College of Dentistry since 1988. Dr. Buschang received his PhD in 1980 from the University of Texas at Austin; he spent 3 years as a NIDR postdoctoral fellow at the University of Connecticut, and five years as a FRSQ scholar at the University of Montreal. Every year, Dr. Buschang teaches in 16 different courses, 7 of which he directs. In addition to more than 100 lecture hours per year, he spends hundreds of hours mentoring students. For his teaching efforts, Dr. Buschang was awarded the Robert E. Gaylord Award of Excellence in Orthodontic education in 1992, 1998, 2004, and 2010. He also gives 1-2 day evidence-based CE courses throughout the world. The residents he has taught recently honored him by pledging to fund the Peter H. Buschang Endowed Professorship of Orthodontics. His research interests pertain to craniofacial growth and assessment of treatment effects. Dr. Buschang has been funded regularly over the years by the Medical Research Council of Canada, Fonds de le Recherche en Santé du Québec, the NIH, and the American Association of Orthodontics Foundation. He has mentored over 140 Master's and PhD students, and 49 dental students. Dr. Buschang has published over 250 peer-reviewed articles, 15 book chapters and 198 abstracts. He has given over 150 invited talks and lectures in 14 different countries. For his work with the American Board of Orthodontics, Dr. Buschang was awarded the Earl E. and Wilma S. Shepard Award. Dr. Buschang is the only non-orthodontist ever to have been made an honorary member of both the American Association of Orthodontics (2005) and the Edward H. Angle Society of Orthodontics (2009), the two most prestigious orthodontic groups.
Assuntos
Técnicas de Movimentação Dentária/métodos , Aparelhos Ativadores , Adolescente , Força de Mordida , Criança , Restauração Dentária Permanente , Feminino , Cabeça/anatomia & histologia , Humanos , Masculino , Má Oclusão/terapia , Má Oclusão Classe II de Angle/terapia , Má Oclusão Classe III de Angle/etiologia , Má Oclusão Classe III de Angle/terapia , Mandíbula/anatomia & histologia , Desenvolvimento Maxilofacial/fisiologia , Procedimentos de Ancoragem Ortodôntica/instrumentação , Desenho de Aparelho Ortodôntico , Aparelhos Ortodônticos Funcionais , Contenções Ortodônticas , Recidiva , Rotação , Técnicas de Movimentação Dentária/instrumentaçãoRESUMO
Orthodontic therapy is known to be associated with the development of gingival recession. Several factors may be involved in the causal chain of this outcome, including anatomical and behavioral aspects. Among the anatomical aspects, the dimensions of the mandibular symphysis could play a predisposing role. This study evaluated the relationship between the mandibular symphysis dimensions prior to orthodontic therapy and the development of gingival recessions on the lower incisors and cuspids. Records from 189 orthodontically treated adolescents were evaluated, including radiographs, casts and intra-oral photographs. Symphysis dimensions were assessed by cephalograms. Gingival margin alterations were determined in photographs and cast models. Association between gingival margin alterations and symphysis dimensions was tested by chi-square (α=0.05). Occurrence of gingival recession increased after orthodontic therapy. No association was observed on average of symphysis dimensions and the occurrence of gingival recessions. It may be concluded that pretreatment symphysis dimensions may not be used as predictors of gingival recession after orthodontic therapy.
Assuntos
Processo Alveolar/patologia , Retração Gengival/etiologia , Mandíbula/patologia , Ortodontia Corretiva , Adolescente , Cefalometria/métodos , Criança , Dente Canino/patologia , Feminino , Humanos , Processamento de Imagem Assistida por Computador/métodos , Incisivo/patologia , Masculino , Má Oclusão Classe I de Angle/terapia , Má Oclusão Classe II de Angle/terapia , Modelos Dentários , Ortodontia Corretiva/efeitos adversos , Fotografia Dentária/métodos , Fatores de RiscoRESUMO
OBJECTIVE: The aim of this study was to identify the procedures adopted by Brazilian orthodontists in the following situations: extraction space closure, anchorage control in case of necessary anchorage for group A and frequency of skeletal anchorage use, especially in the upper jaw. METHODS: A questionnaire was sent to the e-mail address of all dentists registered in the Brazilian Federal Council of Dentistry. RESULTS: The results showed that most Brazilian orthodontists usually perform extraction space closure by means of sliding mechanics. The use of palatal bar, inclusion of second molars in the archwire and space closure performed in two phases are the most used techniques for anchorage control in the upper jaw. The skeletal anchorage is referenced by 36.5% of specialists as a routine practice for the upper arch anchorage. CONCLUSIONS: There is a wide variety of procedures adopted by Brazilian orthodontists for orthodontic space closure and anchorage control.
Assuntos
Procedimentos de Ancoragem Ortodôntica/métodos , Fechamento de Espaço Ortodôntico/métodos , Ortodontia , Padrões de Prática Odontológica , Brasil , Humanos , Incisivo/patologia , Maxila/patologia , Procedimentos de Ancoragem Ortodôntica/instrumentação , Desenho de Aparelho Ortodôntico , Fechamento de Espaço Ortodôntico/instrumentação , Fios Ortodônticos , Inquéritos e QuestionáriosRESUMO
OBJECTIVE: The purpose of the study was to evaluate the influence of the skeletal maturation in the mandibular and dentoalveolar growth and development during the Class II, division 1, malocclusion correction with Balters bionator. METHODS: Three groups of children with Class II, division 1, malocclusion were evaluated. Two of them were treated for one year with the bionator of Balters appliance in different skeletal ages (Group 1: 6 children, 7 to 8 years old and Group 2: 10 children, 9 to 10 years old) and the other one was followed without treatment ( CONTROL GROUP: 7 children, 8 to 9 years old). Lateral 45 degree cephalometric radiographs were used for the evaluation of the mandibular growth and dentoalveolar development. Tantalum metallic implants were used as fixed and stable references for radiograph superimposition and data acquisition. Student's t test was used in the statistical analysis of the displacement of the points in the condyle, ramus, mandibular base and dental points. One-fixed criteria analysis of variance was used to evaluate group differences (95% of level of significance). RESULTS: The intragroup evaluation showed that all groups present significant skeletal growth for all points analyzed (1.2 to 3.7 mm), but in an intergroup comparison, the increments of the mandibular growth in the condyle, ramus and mandibular base were not statically different. For the dentoalveolar modifications, the less mature children showed greater labial inclination of the lower incisors (1.86 mm) and the most mature children showed greater first permanent molar extrusion (4.8 mm).
Assuntos
Processo Alveolar/crescimento & desenvolvimento , Arco Dental/crescimento & desenvolvimento , Má Oclusão Classe II de Angle/terapia , Mandíbula/crescimento & desenvolvimento , Desenvolvimento Maxilofacial/fisiologia , Aparelhos Ortodônticos Funcionais , Ortodontia Corretiva/instrumentação , Determinação da Idade pelo Esqueleto , Processo Alveolar/diagnóstico por imagem , Análise de Variância , Cefalometria/métodos , Criança , Arco Dental/diagnóstico por imagem , Feminino , Humanos , Masculino , Má Oclusão Classe II de Angle/fisiopatologia , Mandíbula/diagnóstico por imagemRESUMO
OBJECTIVE: The purpose of this study was to evaluate the facial profile changes induced by Balters' bionator appliance in Class II division 1 patients, at mixed dentition stage. METHODS: The sample consisted of 28 pre-pubertal individuals at stages 1 and 2 of skeletal maturation (CVM), which were divided into two groups. The experimental group consisted of 14 individuals (7 boys and 7 girls, initial mean age of 8y12m) which were treated with Balters' bionator appliance for 14.7 months. The effects of treatment were compared to a control group of 14 subjects (7 boys and 7 girls, initial mean age of 8y5m) with Class II malocclusion, division 1, not orthodontically treated, which were followed up for 15.4 months. The statistical analysis was performed using Student's t test, at a significance level of 5%. RESULTS: The results showed that the Balters' bionator appliance promoted a significant increase on the mentolabial angle, in addition to demonstrating a tendency to reduce the facial skeletal convexity, to restrict the maxillary growth and to increase the nasolabial angle and the lower anterior facial height. CONCLUSIONS: It can be concluded that the Balters' bionator appliance improved the facial profile of children treated at mixed dentition stage.
Assuntos
Aparelhos Ativadores , Face/anatomia & histologia , Má Oclusão Classe II de Angle/terapia , Desenvolvimento Maxilofacial/fisiologia , Retrognatismo/terapia , Determinação da Idade pelo Esqueleto , Estudos de Casos e Controles , Cefalometria , Vértebras Cervicais/diagnóstico por imagem , Criança , Dentição Mista , Feminino , Humanos , Masculino , Fatores de TempoRESUMO
OBJECTIVE: To systematically review the scientific evidence regarding the effectiveness of high-pull headgear in growing Class II subjects. METHODS: A literature survey was performed by electronic database search. The survey covered the period from January 1966 to December 2008 and used Medical Subject Headings (MeSH). Articles were initially selected based on their titles and abstracts; the full articles were then retrieved. The inclusion criteria included growing subjects with 8 to 15 years of age, Class II malocclusion treatment with high-pull headgear, and a control group with Class II malocclusion. References from selected articles were hand-searched for additional publications. Selected studies were evaluated methodologically. RESULTS: Four articles were selected; none were randomized controlled trials. All of the articles clearly formulated their objectives and used appropriate measures. The studies showed that high-pull headgear treatment improves skeletal and dental relationship, distal displacement of the maxilla, vertical eruption control and upper molars distalization. One of the studies showed a slight clockwise rotation of the palatal plane; the others showed no significant treatment effect. The mandible was not affected by the treatment. CONCLUSIONS: While there is still a lack of strong evidence demonstrating the effects of high-pull headgear with a splint, other studies indicate that the anteroposterior relations improve due to distalization of the maxilla and upper molars, with little or no treatment effects in the mandible. Greater attention to the design should be given to improve the quality of such trials.
Assuntos
Aparelhos de Tração Extrabucal , Má Oclusão Classe II de Angle/terapia , Ortodontia Corretiva/instrumentação , Adolescente , Criança , Feminino , Humanos , Masculino , Ortodontia Corretiva/métodos , Resultado do TratamentoRESUMO
OBJECTIVE: The purpose of this study was to compare dental size measurements, their reproducibility and the application of Tanaka and Johnston regression equation in predicting the size of canines and premolars on plaster and digital dental casts. METHODS: Thirty plaster casts were scanned and digitized. Mesiodistal measurements of the teeth were then performed with a digital caliper on the plaster and digital casts using O3d software system (Widialabs©).The sum of the sizes of the lower incisors was used to obtain predictive values of the sizes of the premolars and canines using the regression equation, and these values were compared with the actual sizes of the teeth. The data were statistically analyzed by applying to the results Pearson's correlation test, Dahlberg's formula, paired t-test and analysis of variance (p < 0.05). RESULTS: Excellent intraexaminer agreement was observed in the measurements performed on both dental casts. No random error was present in the measurements obtained with the caliper and systematic error (bias) was more frequent in the digital casts. Space prediction obtained by applying the regression equation was greater than the sum of the canines and premolars on the plaster and digital casts. CONCLUSIONS: Despite an adequate reproducibility of the measurements performed on both casts, most measurements on the digital casts were higher than those on the plaster casts. The predicted space was overestimated in both models and significantly higher in the digital casts.
Assuntos
Dente Pré-Molar/anatomia & histologia , Dente Canino/anatomia & histologia , Técnica de Fundição Odontológica , Imageamento Tridimensional/métodos , Humanos , Variações Dependentes do Observador , Análise de Regressão , Reprodutibilidade dos Testes , SoftwareRESUMO
AIM: To evaluate the occurrence of external apical root resorption (EARR) in the incisors after anterior retraction in corrective orthodontic treatment with first premolar extractions and whether it was related with the type of root apex movement and its inclination. METHOD: The maxillary and mandibular incisors of 22 patients (12 to 25 years of age; 9 males and 13 females) were treated with fixed appliances and premolar extraction. EARR was defined as the difference in root length before and after incisal retraction on periapical radiographs. Distortion of radiographic images and changes due to incisal tipping were controlled for. Pre- and post-incisal retraction lateral cephalometric radiographs established the relationship between EARR and the tipping of the incisors, along with the vertical, horizontal, and total movement of the root apex. RESULTS: There was significant EARR (1.51 to 2.37 mm) during incisor retraction, but this was not related to the movement or the tipping of the root apex of almost all teeth. It was observed that after the retraction stage, EARR occurred in all evaluated incisors, but it was more significant (P < .05) in the mandibular right lateral incisor. CONCLUSION: The EARR that did occur was unrelated to movement or tipping of the root apex, except for the vertical root apex movement of the mandibular left central incisor and the inclination of the maxillary right lateral incisor.
Assuntos
Incisivo , Reabsorção da Raiz , Humanos , Maxila , Ortodontia Corretiva , Radiografia , Ápice Dentário/diagnóstico por imagemRESUMO
PURPOSE: This case-controlled study examined clinical and microbiological parameters in Brazilian children and adolescents receiving orthodontic treatment using fixed orthodontic appliances or removable orthodontic appliances. METHODS: The plaque index, gingival index, number of decayed, missing and filled teeth, and probing pocket depth was measured on each fully erupted tooth in 30 patients treated with fixed orthodontic appliances and an equal number of age and sex-matched control subjects. The same parameters were also measured in 18 patients treated with removable orthodontic appliances and an equal number of age and sex-matched control subjects. In the patients treated with fixed orthodontic appliances, subgingival plaque samples were collected from four teeth with orthodontic brackets and from four teeth with orthodontic bands. In the patients with removable appliances, subgingival plaque samples were collected from clasped maxillary permanent first molar teeth and from four unclasped permanent teeth. Samples of unstimulated whole saliva and samples from the dorsal surface of the tongue were also obtained from each subject. Each sample was analyzed for the presence of 19 target bacteria by dot blot. A subset of samples was examined by direct amplification of bacterial nucleic acids. RESULTS: Compared to their respective age and sex-matched controls, whole mouth means for plaque index and gingival index were significantly elevated in both the fixed and removable orthodontic groups. There was no difference in the DMFT. Subjects with fixed orthodontic appliances had a higher prevalence of each of the target species except for L. fermentum, Neisseriaceae and S. mutans. The prevalence of A. naeslundii and Streptococcus sp. was significantly higher on teeth with orthodontic brackets alone compared to teeth with both orthodontic bands and brackets. Subjects with removable orthodontic appliances had a higher prevalence of A. actinomycetemcomitans, C. rectus, E. corrodens, L. fermentum, Neisseriaceae, and spirochetes. The prevalence of Neisseriaceae was significantly higher on unclasped teeth compared to clasped teeth. There was no difference between sample sites for the target bacteria except for A. actinomycetemcomitans that was detected less frequently in saliva. Orthodontic patients demonstrated higher proportions of gram negative species by direct amplification of nucleic acids including species frequently associated with periodontal disease as well as rarely cultivable or non-cultivable species such as Abiotrophia defectiva, Gemella haemolysans, Granulicatella adiacens, Lautropia sp., Terrahaemophilus aromaticivorans, and TM7 bacterium.
Assuntos
Placa Dentária/microbiologia , Aparelhos Ortodônticos/efeitos adversos , Saliva/microbiologia , Adolescente , Bactérias Anaeróbias/genética , Proteínas de Bactérias/análise , Estudos de Casos e Controles , Criança , Índice CPO , Placa Dentária/etiologia , Índice de Placa Dentária , Feminino , Bactérias Gram-Negativas/genética , Humanos , Masculino , Aparelhos Ortodônticos Removíveis/efeitos adversos , Braquetes Ortodônticos/efeitos adversos , Fios Ortodônticos/efeitos adversos , Índice PeriodontalRESUMO
AIM: To evaluate the shear bond strength in vivo and in vitro of metallic brackets bonded to human teeth with light-curing bonding material, using two types of light-curing units. METHODS: Sixty human premolars were divided into six groups. In the GI and GII groups, the brackets were directly bonded to volunteers' maxillary and mandibular second premolars on the right and left sides, respectively, of their mouths. In the other groups, the brackets were bonded to extracted first premolars. The polymerization was performed in GI, GIII, and GV with an LED (light-emitting diode) device, while in GII, GIV, and GVI, a halogen light was used. In GI and GII, shear strength tests were conducted using a portable digital dynamometer placed directly in the patients' mouths. The teeth from GIII, GIV, GV, and GVI were stored in distilled water at 37 degrees C for 24 hours. Afterward, they were thermocycled between 5 degrees and 55 degrees C. Then, in GIII and GIV, a Universal Testing Machine was used; in GV and GVI, mechanical tests were performed with a digital dynamometer. The bracket/adhesive failure modes were evaluated with the Adhesive Remnant Index (ARI). RESULTS: The average values of the shear strengths in MPa were: GI = 3.65; GII = 4.39; GIII = 6.45; GIV = 7.11; GV = 4.67; and GVI = 4.21. CONCLUSIONS: The type of light-curing unit did not interfere with the results of the mechanical tests in vivo or in vitro. The tests performed with a portable digital device obtained average values that were significantly lower than those performed with the Universal Testing Machine.
Assuntos
Lâmpadas de Polimerização Dentária/classificação , Colagem Dentária , Esmalte Dentário/ultraestrutura , Braquetes Ortodônticos , Cimentos de Resina/efeitos da radiação , Adesividade , Adolescente , Dente Pré-Molar , Criança , Análise do Estresse Dentário/instrumentação , Humanos , Teste de Materiais/instrumentação , Cimentos de Resina/química , Resistência ao Cisalhamento , Estresse Mecânico , Propriedades de Superfície , Temperatura , Fatores de Tempo , Água/químicaRESUMO
OBJECTIVE: To compare the system of forces acting on curvature and preactivated V-bends in titanium T-loop springs (TTLSs) made of 0.017- x 0.025-inch TMA (titanium molibdenium alloy) wire. MATERIALS AND METHODS: Pictures of TTLSs preactivated by curvature and V-bends were inserted in the LOOP software program to design both TTLSs. Symmetry was assured using the program. Both TTLSs used the same amount (length) of wire and had the same angulation between their anterior and posterior extremities when passive. The loops were activated 7 mm, and forces and moments were registered after each 0.5 mm of deactivation. The brackets were at the same height, separated by 23 mm and angulated 0 degrees . RESULTS: The preactivated curvature TTLS delivered horizontal forces ranging from 34 gF to 456 gF, while the TTLS preactivated by V-bends delivered forces ranging from 54 gF to 517 gF. The forces decreased more (30 gF vs 33 gF) with every 0.5 mm of activation on the preactivated V-bend TTLS than on the preactivated curvature TTLS. Vertical forces were low and clinically insignificant for both TTLSs. The moment to force (MF) ratios were systematically higher on the preactivated curvature than on the preactivated V-bend TTLS (from 5.8 mm to 38.8 mm vs 4.7 mm to 28.3 mm). CONCLUSIONS: Although both loops show symmetrical moments in their anterior and posterior extremities and can be used for group B anchorage, the curvature preactivated TTLS delivers lower horizontal forces and higher MF ratios than the acute preactivated V-bend TTLS.