Improved antioxidant activity of a starch and gelatin-based biodegradable coating containing Tetradenia riparia extract.

The incorporation of plant-based extracts into polymer-based coatings is an efficient alternative to increase the shelf-life of stored fruit and to decrease or even prevent bacterial growth. Considering strawberries, it is also important to preserve their high antioxidant activity. Hence, this work evaluated the efficiency of a coating based on native cassava starch (NCS), gelatin, and sorbitol, containing different concentrations of Tetradenia riparia extract, in delaying the ripening process of strawberries stored under refrigerated conditions, and in preventing bacterial growth and antioxidant activity losses. Both concentrations of extract (500 or 1000 µg mL-1) increased the thickness, opacity, and water vapor transmission rate (WVTR) of the films when compared to the film without extract, but decreased the solubility. Even though the film without extract was expected to create a more efficient barrier to the coated fruits, the films containing the extract led to similar results of soluble solids (SS), titratable acidity (TA), and vitamin C. Nevertheless, the extract incorporation improved the control over bacterial growth, and preserved the high antioxidant activity of the strawberries within ten days of storage.

Iron Or Zinc Bioaccumulated In Mycelial Biomass Of Edible Basidiomycetes.

Iron and zinc bioaccumulation in mycelial biomass of different medicinal basidiomycetes was evaluated in order to produce metal-enriched mycelial biomass as an alternative functional food from non-animal sources and based on biotechnology processes. Pleurotus ostreatus strain U2-9, U2-11, U6-8, and U6-9, Pleurotus eryngii strain U8-11, Schizophyllum commune strain U6-7, and Lentinula edodes strain U6-11 and U6-12 were grown in malt extract agar with or without addition of 50 mg/L iron or 7.5 mg/L zinc. The mycelial biomass was separated and iron and zinc concentrations were determined in a flame atomic absorption spectrophotometer. Basidiomycete strains presented different growth rates with the presence of iron and zinc; there was no dependence between the metal bioaccumulation and the fungal growth. The fungi presented greater capacity to bioaccumulate iron than zinc. P. ostreatus (U2-9) has greater iron bioaccumulation (3197.7 mg/kg) while P. ostreatus (U6-8) greater zinc bioaccumulation (440.4 mg/kg) in mycelial biomass. P. ostreatus (U2-9), P. ostreatus (U2-11), and S. commune (U6-7) had the highest metal translocation rates from the culture medium to mycelial biomass. The mycelial biomass enriched with iron or zinc is an alternative to a new functional food from non-animal sources.

Shelf-life of guavas coated with biodegradable starch and cellulose-based films.

Guava is a perishable fruit susceptible to post-harvest losses. So, the development of biodegradable films based on acetylated cassava starch (ACS) and hydroxyethyl cellulose (HEC) could be an alternative to increase guavas (Psidium guajava L.) shelf life. Films were characterized by solubility, opacity, water vapor transport, and thickness. Mass loss, texture, titratable acidity, soluble solids, vitamin C, and skin color of the fruits were analyzed. The films with higher HEC concentration were more transparent and hygroscopic. Guava coated with 75% HEC and 25% ACS or 100% HEC films increased firmness, maintained green skin color and reduced ripeness, lasting for 13 days, ensuring that the ACS and HEC based films can increase guavas shelf life, besides decrease environmental impacts of non-biodegradable packages.

Effect of gelatin and casein additions on starch edible biodegradable films for fruit surface coating.

Coating fruits surface with biodegradable films obtained from starch is an alternative to delay the fruit ripening process. This study aimed to develop a biodegradable film from a polymer blend consisting of natural cassava starch, casein, and gelatin, and using sorbitol as the plasticizer. Among all the prepared biodegradable films (BFs), the one with desirable results in thickness, opacity, solubility, and water vapor transmission rate (WVTR) analyzes was based on a high concentration of starch, and casein, and low concentration of gelatin. Also, this film had the lowest solubility among all of them. Guava fruit coated with this film showed a two-day increase in shelf-life when compared to non-coated guavas. The increase in shelf-life was due to the extremely low water vapor transmission rate of the films, decreasing the fruits' mass loss, and, consequently, retarding their senescence. These results indicate that the biodegradable film is a promising material for fruit coating.

Synthesis and characterization of a low solubility edible film based on native cassava starch.

Films based on cassava starch have been widely used for fruit coating; however, it is necessary to incorporate other polymers in order to improve mechanical properties, once starch only leads to highly hydrophilic films, compromising their application. In this way, a polymeric blend based on cassava starch, chitosan and gelatin was combined with a plasticizer to produce biodegradable films with satisfactory mechanical and barrier properties, in order to be used as fruit coating. The films were prepared by casting method and a statistical design of 23 was used to evaluate the effect of each polymer and what their combinations would influence over the final product. The formation of a physical blend was confirmed by FTIR. It showed low solubility, varying (10 ±â€¯2) % a (23 ±â€¯4) %, Opacity ranging from (1.06 ±â€¯0.04) to (1.55 ±â€¯0.13) AU x nm/mm, thickness from (0.20 ±â€¯0.01) mm to (0.44 ±â€¯0.03) mm and water vapor transmission rate ranging from 25 ±â€¯0.2 to 30 ±â€¯1.4 g s-1 m-2. Lower amounts of starch led to more flexible, less opaque and soluble films, while the combination of higher levels of starch and chitosan was responsible for lowering films water vapor transmission rate. Thus, the films showed interesting properties for fruit surface coating.

Iron bioaccumulation in mycelium of Pleurotus ostreatus.

Pleurotus ostreatus is able to bioaccumulate several metals in its cell structures; however, there are no reports on its capacity to bioaccumulate iron. The objective of this study was to evaluate cultivation variables to increase iron bioaccumulation in P. ostreatus mycelium. A full factorial design and a central composite design were utilized to evaluate the effect of the following variables: nitrogen and carbon sources, pH and iron concentration in the solid culture medium to produce iron bioaccumulated in mycelial biomass. The maximum production of P. ostreatus mycelial biomass was obtained with yeast extract at 2.96 g of nitrogen L (-1) and glucose at 28.45 g L (-1) . The most important variable to bioaccumulation was the iron concentration in the cultivation medium. Iron concentration at 175 mg L (-1) or higher in the culture medium strongly inhibits the mycelial growth. The highest iron concentration in the mycelium was 3500 mg kg (-1) produced with iron addition of 300 mg L (-1) . The highest iron bioaccumulation in the mycelium was obtained in culture medium with 150 mg L (-1) of iron. Iron bioaccumulation in P. ostreatus mycelium is a potential alternative to produce non-animal food sources of iron.

Iron bioaccumulation in mycelium of Pleurotus ostreatus

Pleurotus ostreatus is able to bioaccumulate several metals in its cell structures; however, there are no reports on its capacity to bioaccumulate iron. The objective of this study was to evaluate cultivation variables to increase iron bioaccumulation in P. ostreatus mycelium. A full factorial design and a central composite design were utilized to evaluate the effect of the following variables: nitrogen and carbon sources, pH and iron concentration in the solid culture medium to produce iron bioaccumulated in mycelial biomass. The maximum production of P. ostreatus mycelial biomass was obtained with yeast extract at 2.96 g of nitrogen L−1 and glucose at 28.45 g L−1. The most important variable to bioaccumulation was the iron concentration in the cultivation medium. Iron concentration at 175 mg L−1 or higher in the culture medium strongly inhibits the mycelial growth. The highest iron concentration in the mycelium was 3500 mg kg−1 produced with iron addition of 300 mg L−1. The highest iron bioaccumulation in the mycelium was obtained in culture medium with 150 mg L−1 of iron. Iron bioaccumulation in P. ostreatus mycelium is a potential alternative to produce non-animal food sources of iron.