Modelling and experimental validation of Textile Pockets based active inflatable device.

This paper aims with the mathematical modelling of an active inflatable device. This device is composed of a compressor, an Electro-pneumatic Pressure Converter (EPC) and an Inflatable Textile fabric Pocket (ITP). The later has interesting mechanical properties and is fabricated using Jacquard knitting technique which allows automatic production of unlimited varieties of pattern weaving without any mould. Thanks to these features, these ITPs have provided a better alternative to the classical airbags made by stretchable polymer material. The proposed mathematical model is obtained by combining sub-models of two main parts of the whole system. In this way, a generalised and flexible model is obtained which can easily take into consideration the ITPs of different shapes. The pressure dynamics inside the ITP are considered by taking into account the air flow rate, variation of the volume of ITP and the length of pneumatic lines joining ITP with compressed air source. The parameters of the whole mathematical model are obtained via identification techniques. The effectiveness of the model is assessed through several experimental tests with the help of a servo hydraulic fatigue testing machine.

Study of water absorption in Raffia vinifera fibres from Bandjoun, Cameroon.

The study is focused on the water diffusion phenomenon through the Raffia vinifera fibre from the stem. The knowledge on the behavior of those fibres in presence of liquid during the realization of biocomposite, is necessary. The parameters like percentage of water gain at the point of saturation, modelling of the kinetic of water absorption, and the effective diffusion coefficient were the main objectives. Along a stem of raffia, twelve zones of sampling were defined. From Fick's 2nd law of diffusion, a new model was proposed and evaluated compared to four other models at a constant temperature of 23°C. From the proposed model, the effective diffusion coefficient was deduced. The percentage of water gain was in the range of 303-662%. The proposed model fitted better to the experimental data. The estimated diffusion coefficient was evaluated during the initial phase and at the final phase. In any cross section located along the stem of Raffia vinifera, it was found that the effective diffusion coefficient increases from the periphery to the centre during the initial and final phases.