Designing 1-nm-Thick MOF Nanosheets with Donor-Acceptor Complexes for Photosynthesis of H2O2 Using Water and Dioxygen Only.

Artificial photosynthesis of hydrogen peroxide (H2O2) presents a promising environmentally friendly alternative to the industrial anthraquinone process. This work designed ultrathin metal-organic framework (MOF) nanosheets on which porphyrin ligand as an electron donor (D) and anthraquinone (AQ) as an electron acceptor (A) are integrated as the D-A complexes. The porphyrin component allows the MOF nanosheets to absorb full-spectrum solar light while the acceptor AQ motif promotes central aluminum ion coordination, hindering layer stacking to achieve a thickness of 1.0 nm. The ultrathin D-A design facilitates the separation of electrons from the MOF skeleton to the AQ motif, which induces the direct two-electron oxygen reduction reaction (ORR) mediated by the reversible redox couple of AQ-AQH2 and multielectron water oxidation reaction (WOR) driven by holes remaining on the porphyrin part. In O2-saturated water, the ultrathin MOF nanosheets outperformed the AQ-free bulk and multilayered counterparts by 2.9 and 2.6 times in H2O2 production, respectively, achieving the apparent quantum yield of 4.8% at 420 nm. It also surpasses other benchmark photocatalysts, including the typical MOF photocatalyst, MIL-125-NH2, and organic polymeric photocatalysts. The ultrathin D-A MOF photocatalyst generated H2O2 via both two-electron ORR as a major path and two-electron WOR as a minor path. This approach presents a promising strategy for the rational design of efficient nanostructured photocatalysts for solar fuels and chemicals.

Simultaneous Oxidation of Bromide and Dissolution of Manganese Oxide Induced by Freezing.

This study demonstrates that the oxidation of bromide by birnessite (δ-MnO2) results in the concurrent production of soluble manganese (Mn(II)) and reactive bromine (RBr) species in frozen solutions, a process not observed in aqueous solutions. This enhanced oxidation in ice is attributed to the concentration of protons, birnessite, or bromide in the ice grain boundary region. Furthermore, different types of commercial manganese oxides can also oxidize bromide to RBr and release Mn(II) in ice. The presence of fulvic acid (FA) further increases the simultaneous production of RBr and Mn(II) in ice, accompanying the formation of organobromine compounds (OBCs). In frozen δ-MnO2/Br-/FA system, a significant increase in OBCs, mainly highly unsaturated and phenolic compounds, was detected using Fourier transform ion cyclotron resonance mass spectrometry. A marked contrast was observed in the number of OBCs formed in frozen solutions (853 and 415 OBCs at initial pH 3.0 and 5.8, respectively) compared to their aqueous counterparts (11 and 23 OBCs). These findings introduce a new pathway for the formation of RBr, Mn(II), and OBCs in ice, highlighting the need for further research on the environmental fate of bromide and manganese.

Carbon chain elongation characterizations of electrode-biofilm microbes in electro-fermentation.

The higher efficiency of electro-fermentation in synthesizing medium-chain fatty acids (MCFAs) compared to traditional fermentation has been acknowledged. However, the functional mechanisms of electrode-biofilm enhancing MCFAs synthesis remain research gaps. To address this, this study proposed a continuous flow electrode-biofilm reactor for chain elongation (CE). After 225 days of operation, stable electrode-biofilms formed and notably improved caproate yield by more than 38 %. The electrode-biofilm was enriched with more CE microorganisms and electroactive bacteria compared to the suspended sludge microorganisms, including Caproicibacterium, Oscillibacter and Pseudoramibacter. Besides, the upregulated CE pathways were evaluated by metagenomic analysis, and the results indicated that the pathways such as acetyl-CoA and malonyl-[acp] formation, reverse beta-oxidation, and fatty acid biosynthesis pathway were all markedly enhanced in cathodic biofilm, more than anodic biofilm and suspended microorganisms. Moreover, microbial community regulated processes like bacterial chemotaxis, flagellar assembly and quorum sensing, crucial for electrode-biofilm formation. Electron transfer, energy metabolism, and microbial interactions were found to be prominently upregulated in the cathodic biofilm, surpassing levels observed in anodic biofilm and suspended sludge microorganisms, which further enhanced CE efficiency. In addition, the statistical analyses further highlighted key microbial functions and interactions within the cathodic biofilm. Oscillospiraceae_bacterium was identified to be the most active microbe, alongside pivotal roles played by Caproiciproducens_sp._NJN-50, Clostridiales_bacterium, Prevotella_sp. and Pseudoclavibacter_caeni. Eventually, the proposed microbial collaboration mechanisms of cathodic biofilm were ascertained. Overall, this study uncovered the biological effects of the electrode-biofilm on MCFAs electrosynthesis, thereby advancing biochemicals production and filling the knowledge gaps in CE electroactive biofilm reactors.

Advances of carbon-based materials for activating peracetic acid in advanced oxidation processes: A review.

In recent years, the peracetic acid (PAA)-based advanced oxidation process (AOPs) has garnered significant attention in the field of water treatment due to rapid response time and environmentally-friendliness. The activation of PAA systems by diverse carbon-based materials plays a crucial role in addressing emerging environmental contaminants, including various types, structures, and modified forms of carbon materials. However, the structural characteristics and structure-activity relationship of carbon-based materials in the activation of PAA are intricate, while the degradation pathways and dominant active species exhibit diversity. Therefore, it is imperative to elucidate the developmental process of the carbon-based materials/PAA system through resource integration and logical categorization, thereby indicating potential avenues for future research. The present paper comprehensively reviews the structural characteristics and action mechanism of carbon-based materials in PAA system, while also analyzing the development, properties, and activation mechanism of heteroatom-doped carbon-based materials in this system. In conclusion, this study has effectively organized the resources pertaining to prominent research direction of comprehensive remediation of environmental water pollution, thereby elucidating the underlying logic and thought process. Consequently, it establishes robust theoretical foundation for future investigations and applications involving carbon-based materials/PAA system.

Unveiling the fate of metal leaching in bimetal-catalyzed Fenton-like systems: pivotal role of aqueous matrices and machine learning prediction.

Metal-based catalytic materials exhibit exceptional properties in degrading emerging pollutants within Fenton-like systems. However, the potential risk of metal leaching has become pressing environmental concern. This study addressed scientific issues pertaining to the leaching behavior and control strategies for metal-based catalytic materials. Innovative cobalt-aluminum hydrotalcite (CoAl-LDH) triggered peroxymonosulfate (PMS) activation system was constructed and achieved near-complete removal of Ciprofloxacin (CIP) across diverse water quality environments. Notably, it was found that the tunable ion exchange and Al3+ stabilization of CoAl-LDH occurred due to the particularity of neutral water quality, resulting in significantly lower Co2+ leaching levels (0.321 mg/L) compared to acidic conditions (5.103 mg/L). In light of this, machine learning technology was then employed for the first time to simulate the dynamic trend of Co2+ leaching and elucidated the critical regulatory roles and mechanisms of Al3+, aqueous matrix, and reaction rate. Furthermore, degradation systems based on different water quality and metal leaching levels regulated the generation levels of SO4.- and O2∙-, and the unique advantages of free radical attack paths were clarified through CIP degradation products and ecotoxicity analysis. These findings introduced novel insights and approaches for engineering application and pollution control in metal-based Fenton-like water treatment.

How hetero-single-atom dispersion reconstructed electronic structure of carbon materials and regulated Fenton-like oxidation pathways.

Single-atom catalysts (SACs) have emerged as competitive candidates for Fenton-like oxidation of micro-pollutants in water. However, the impact of metal insertion on the intrinsic catalytic activity of carrier materials has been commonly overlooked, and the environmental risk due to metal leaching still requires attention. In contrast to previous reports, where metal sites were conventionally considered as catalytic centers, our study investigates, for the first time, the crucial catalytic role of the carbon carrier modulated through hetero-single-atom dispersion and the regulation of Fenton-like oxidation pathways. The inherent differences in electronic properties between Fe and Co can effectively trigger long-range electron rearrangement in the sp2-carbon-conjugated structure, creating more electron-rich regions for peroxymonosulfate (PMS) complexation and initiating the electron transfer process (ETP) for pollutant degradation, which imparts the synthesized catalyst (FeCo-NCB) with exceptional catalytic efficiency despite its relatively low metal content. Moreover, the FeCo-NCB/PMS system exhibits enduring decontamination efficiency in complex water matrices, satisfactory catalytic stability, and low metal leaching, signifying promising practical applications. More impressively, the spatial relationship between metal sites and electron density clouds is revealed to determine whether high-valent metal-oxo species (HVMO) are involved during the decomposition of surface complexes. Unlike single-type single-atom dispersion, where metal sites are situated within electron-rich regions, hetero-single-atom dispersion can cause the deviation of electron density clouds from the metal sites, thus hindering the in-situ oxidation of metal within the complexes and minimizing the contribution of HVMO. These findings provide new insights into the development of carbon-based SACs and advance the understanding of nonradical mechanisms underpinning Fenton-like treatments.

Freezing-Enhanced Photoreduction of Iodate by Fulvic Acid.

Iodate is a stable form of iodine species in the natural environment. This work found that the abiotic photosensitized reduction of iodate by fulvic acid (FA) is highly enhanced in frozen solution compared to that in aqueous solution. The freezing-induced removal of iodate by FA at an initial pH of 3.0 in 24 h was lower than 10% in the dark but enhanced under UV (77.7%) or visible light (31.6%) irradiation. This process was accompanied by the production of iodide, reactive iodine (RI), and organoiodine compounds (OICs). The photoreduction of iodate in ice increased with lowering pH (pH 3-7 range) or increasing FA concentration (1-10 mg/L range). It was also observed that coexisting iodide or chloride ions enhanced the photoreduction of iodate in ice. Fourier transform ion cyclotron resonance mass spectrometric analysis showed that 129 and 403 species of OICs (mainly highly unsaturated and phenolic compounds) were newly produced in frozen UV/iodate/FA and UV/iodate/FA/Cl- solution, respectively. In the frozen UV/iodate/FA/Cl- solution, approximately 97% of generated organochlorine compounds (98 species) were identified as typical chlorinated disinfection byproducts. These results call for further studies of the fate of iodate, especially in the presence of chloride, which may be overlooked in frozen environments.

Enhanced Oxidation of Organic Compounds by the Ferrihydrite-Ferrate System: The Role of Intramolecular Electron Transfer and Intermediate Iron Species.

Previous studies mostly held that the oxidation capacity of ferrate depends on the involvement of intermediate iron species (i.e., FeIV/FeV), however, the potential role of the metastable complex was disregarded in ferrate-based heterogeneous catalytic oxidation processes. Herein, we reported a complexation-mediated electron transfer mechanism in the ferrihydrite-ferrate system toward sulfamethoxazole (SMX) degradation. A synergy between intermediate FeIV/FeV oxidation and the intramolecular electron transfer step was proposed. Specifically, the conversion of phenyl methyl sulfoxide (PMSO) to methyl phenyl sulfone (PMSO2) suggested that FeIV/FeV was involved in the oxidation of SMX. Moreover, based on the in situ Raman test and chronopotentiometry analysis, the formation of the metastable complex of ferrihydrite/ferrate was found, which possesses higher oxidation potential than free ferrate and could achieve the preliminary oxidation of organics via the electron transfer step. In addition, the amino group of SMX could complex with ferrate, and the resulting metastable complex of ferrihydrite/ferrate would combine further with SMX molecules, leading to intramolecular electron transfer and SMX degradation. The ferrate loss experiments suggested that ferrihydrite could accelerate the decomposition of ferrate. Finally, the effects of pH value, anions, humic acid, and actual water on the degradation of SMX by ferrihydrite-ferrate were also revealed. Overall, ferrihydrite demonstrated high catalytic capacity, good reusability, and nontoxic performance for ferrate activation. The ferrihydrite-ferrate process may be a green and promising method for organic removal in wastewater treatment.

Effect of dissolved oxygen concentration on performance and mechanism of simultaneous nitrification and denitrification in integrated fixed-film activated sludge sequencing batch reactors.

Integrated fixed-film activated sludge (IFAS) is a superior system for achieving simultaneous nitrification and denitrification (SND), however, the impact of dissolved oxygen (DO) has not been fully elucidated. Therefore, this study investigated the effect of DO concentration on performance and mechanism of SND in IFAS system. Results showed that IFAS outperformed control systems and achieved optimal SND performance at a DO concentration of 0.5 mg/L, with an SND efficiency of 88.51% and total nitrogen removal efficiency of 82.78%. Typical cycles analysis demonstrated limited-DO promoted SND performance. Further analysis implied biofilms exhibited high biomass and denitrification activity with decreasing DO. Microbial community analysis revealed low DO concentrations were responsible for abundant functional groups and genes associated with SND and promoted unconventional nitrogen removal pathways. Moreover, co-occurrence network analysis elucidated microbial interactions, responses to DO, and keystone genera. This study helps understanding the roles of DO for enhanced SND in IFAS.

MnO2-Induced Oxidation of Iodide in Frozen Solution.

Metal oxides play a critical role in the abiotic transformation of iodine species in natural environments. In this study, we investigated iodide oxidation by manganese dioxides (ß-MnO2, γ-MnO2, and δ-MnO2) in frozen and aqueous solutions. The heterogeneous reaction produced reactive iodine (RI) in the frozen phase, and the subsequent thawing of the frozen sample induced the gradual transformation of in situ-formed RI to iodate or iodide, depending on the types of manganese dioxides. The freezing-enhanced production of RI was observed over the pH range of 5.0-9.0, but it decreased with increasing pH. Fulvic acid (FA) can be iodinated by I-/MnO2 in aqueous and frozen solutions. About 0.8-8.4% of iodide was transformed to organoiodine compounds (OICs) at pH 6.0-7.8 in aqueous solution, while higher yields (10.4-17.8%) of OICs were obtained in frozen solution. Most OICs generated in the frozen phase contained one iodine atom and were lignin-like compounds according to Fourier transform ion cyclotron resonance/mass spectrometry analysis. This study uncovers a previously unrecognized production pathway of OICs under neutral conditions in frozen environments.

Effects of magnetic field on selenite removal by sulfidated zero valent iron under aerobic conditions.

A novel strategy of sulfide modified zero valent iron (S-ZVI) coupled with the magnetic field (MF) is developed for selenite (Se(IV)) removal. The original ZVI particle size (30 µm), S/Fe ratio (1:80), solution pH (5), S-ZVI loading (0.75 g L-1), and MF intensity (20 mT) can exhibit the optimal enhancement effects of MF on Se(IV) removal by S-ZVI. Common corrosion promoters (Cl-, PO43-, SO42-, Mg2+, and Ca2+) and inhibitors (NO3-, SiO32-, and CO32-) show positive and negative effects on Se(IV) removal by S-ZVI, respectively. But MF can alleviate promoting or inhibiting effects of coexisting ions on Se(IV) removal by S-ZVI, and well preserve the reactivity of S-ZVI from background ions in water. Furthermore, MF can also enhance the reactivity of S-ZVI towards Se(IV) during consecutive experiments, the promotion factor (the ratio of kobs with MF to kobs without MF) increased from 2.57 to 5.83 with the increase of cycles. MF can not only improve the reactivity of ZVI covered with iron oxide or iron hydroxide but also effectively enhance the ability of ZVI covered with iron sulfide. S-ZVI exhibited good stability and recyclability in the presence of MF. XANES analysis of selenium species reveals that the reductive product of Se(IV) with or without MF is primarily Se(0), and Se(IV) removal by S-ZVI can be ascribed to adsorption and reduction. This work indicates that MF may widen the application of S-ZVI for pollutants removal in environmental remediation.

Freeze-Thaw Cycle-Enhanced Transformation of Iodide to Organoiodine Compounds in the Presence of Natural Organic Matter and Fe(III).

The formation of organoiodine compounds (OICs) is of great interest in the natural iodine cycle as well as water treatment processes. Herein, we report a pathway of OIC formation that reactive iodine (RI) and OICs are produced from iodide oxidation in the presence of Fe(III) and natural organic matter (NOM) in frozen solution, whereas their production is insignificant in aqueous solution. Moreover, thawing the frozen solution induces the further production of OICs. A total of 352 OICs are detected by Fourier transform ion cyclotron resonance mass spectrometry in the freeze-thaw cycled reactions of Fe(III)/I-/humic acid solution, which are five times as many as OICs in aqueous reactions. Using model organic compounds instead of NOM, aromatic compounds (e.g., phenol, aniline, o-cresol, and guaiacol) induce higher OIC formation yields (10.4-18.6%) in the freeze-thaw Fe(III)/I- system than those in aqueous (1.1-2.1%) or frozen (2.7-7.6%) solutions. In the frozen solution, the formation of RI is enhanced, but its further reaction with NOM is hindered. Therefore, the freeze-thaw cycle in which RI is formed in the frozen media and the resulting RI is consumed by reaction with NOM in the subsequently thawed solution is more efficient in producing OICs than the continuous reaction in frozen solution.

Inhibition of biofouling in membrane bioreactor by metabolic uncoupler based on controlling microorganisms accumulation and quorum sensing signals secretion.

Biofouling is a limiting bottleneck in the development of membrane bioreactor (MBR) since the birth of this technology. Recently, the biofouling control strategy based on interfering with the bacterial quorum sensing (QS) system is highly desirable for biofouling control in MBR. In this study, three lab-scale parallel MBR systems were operated over 100 days to investigate the inhibitory effect of a metabolic uncoupler (3,3',4',5-tetrachlorosalicylanilide, TCS) on biofouling and the potential mechanism for biofouling control. Compared to the control MBR, the fouling cycle duration of MBR 2 with 100 µg/L TCS extended over two times. The attached biomass on membrane in MBR 2 decreased over 50% at the end of each operating period, which indicated that the addition of TCS significantly mitigated microorganisms accumulation on membrane. The content of interspecies QS signal (autoinducer-2) and intraspecific QS signals (N-octanoyl-dl-homoserine lactone, C8-HSL) was reduced by the TCS, suggesting the secretion of QS signals in MBR were affected by uncoupler. Although the addition of TCS induced brief fluctuations of extracellular proteins and polysaccharides, microorganisms seemed to rapidly acclimatize to the presence of TCS and then the secretion of extracellular polymeric substances (EPS) was inhibited by 100 µg/L TCS. The continuous operation of MBR was not be affected by the low-concentration uncoupler via the analysis of substrate removal and sludge growth. This study systematically evaluated the effect and inhibitory efficiency of TCS on biofouling, biomass accumulation, QS signals, EPS and treatment performances, demonstrating the feasibility of metabolic uncoupler for biofouling control in MBR.

Performance of selenate removal by biochar embedded nano zero-valent iron and the biological toxicity to Escherichia coli.

The application of nano zero-valent iron (nZVI) in water environment was limited by its easily aggregation and potential biological toxicity. In this study, biochar embedded nZVI (BC-nZVI) was prepared by carbon-thermal reduction method, and the SEM-EDX mapping results showed that nZVI was successfully embedded on biochar. Meanwhile, BC-nZVI with the optimal Fe/C of 2/1 showed a similar Se(vi) removal efficiency to pure nZVI. Effects of pH, BC-nZVI loading, and initial Se(vi) concentration were studied. Se(vi) removal rates (at 30 min) by BC-nZVI at pH 4.0 and 5.0 were 98.2% and 95.9%, respectively. But Se(vi) removal rate (at 30 min) was sharply decreased to 25.8% at pH 6.0. With the increase of BC-nZVI loading from 0.5 g L-1 to 1 g L-1, Se(vi) removal rate (at 30 min) significantly increased from 25.5% to 95.9%. And the continuous increase of BC-nZVI loading to 2 g L-1 did not improve Se(vi) removal rate. Se(vi) less than 3 mg L-1 was completely removed by BC-nZVI in 30 min, but Se(vi) more than 6 mg L-1 only was removed about 25.9% at 30 min. Optimal parameters were pH 4.0, 2 g L-1 BC-nZVI, and 1.5 mg L-1 Se(vi). Variation of calculated amount, SOD activity, and protein content of Escherichia coli with nZVI and BC-nZVI indicated that nZVI and BC-nZVI both produced negative effects on the growth of E. coli. But the amount and SOD activity of E. coli with pure nZVI was lower than that with BC-nZVI. Moreover, E. coli with nZVI released more protein than that with BC-nZVI. So modified nZVI by biochar was less harmful to E. coli than nZVI.

Upgrading liquor-making wastewater into medium chain fatty acid: Insights into co-electron donors, key microflora, and energy harvest.

Ethanol and lactate are considered suitable electron donors (EDs) for chain elongation (CE); however, their respective shortcomings still limit the substrate conversion ratio and medium chain fatty acid (MCFA) production. To address this limitation, different EDs and electron acceptors (EAs) were combined to compare their CE performances, and to investigate whether the combination of ethanol and lactate could further enhance the MCFA production based on the complementary characteristics of ethanol and lactate. The results verified, for the first time, ethanol and lactate as the co-EDs formed a cooperative relationship to largely promote the conversion of substrates into MCFA. The co-EDs of ethanol and lactate stimulated the transformation of dispersive lactate-carbon flux from the competing acrylate pathway into n-heptylate. Additionally, the coexisting by-products (H2 and CO2) from ethanol and lactate also contributed to the supererogatory MCFA generation. The key microbial taxa that distinguished the co-EDs from their single action were the preponderant species from class Negativicutes and family Ruminococcaceae. In addition, the co-EAs of acetate, n-butyrate, and n-caproate also promoted MCFA generation. Low concentration of n-caproate could be directly elongated into n-caprylate, while n-caproate concentration exceeding the toxic limit was unsuitable as an EA. This research provided a guide for substrate selection and collocation for CE technology. Chinese liquor-making wastewater (CLMW) was subsequently used as a substrate for MCFA production since it contains abundant lactate, ethanol, and short-chain fatty acids. In this study, a MCFA selectivity of 80.34 ±â€¯5.26%, a slightly higher selectivity which is in the range of previously reported ones, was obtained. This study paves a way for the sustainable development of Chinese liquor industry by recycling the high-output CLMW into MCFA.

Hydroxyl radical dominated degradation of aquatic sulfamethoxazole by Fe0/bisulfite/O2: Kinetics, mechanisms, and pathways.

In this study, batch experiments were carried out to investigate the key factors on sulfamethoxazole (SMX) removal kinetics in a new AOPs based on the combination of zero valent iron (Fe0) and bisulfite (S(IV)). With the increase of Fe0 from 0.25 mM to 5 mM, the removal rate of SMX was linearly increased in the Fe0/S(IV)/O2 system by accelerating the activation of S(IV) and Fe0 corrosion to accelerate. In the first 10 min of reaction, the increasing concentration of S(IV) inhibited SMX removal after since the high S(IV) concentration quenched reactive oxidative species (ROS). Then SMX removal rate was accelerated with the increase of S(IV) concentration after S(IV) were consumed up. The optimal ratio of S(IV) concentrations to Fe0 concentration for SMX removal in the Fe0/S(IV)/O2 system was 1:1. With SMX concentrations increasing from 1 to 50 µM, SMX removal rate was inhibited for the limitation of ROS yields. Although the presence of SO4- and OH was confirmed by electron paramagnetic resonance (EPR) spectrum, OH was identified as the dominant ROS in the Fe0/S(IV)/O2 system by chemical quenching experiments. Besides, strong inhibitive effects of 1,10-phenanthroline on SMX degradation kinetics by Fe0/S(IV)/O2 proved that the generation of ROS was rely on the release of Fe(II) and Fe(III). The generation of SO4- was ascribed to the activation of S(IV) by Fe(II)/Fe(III) recycling and the activation of HSO5- by Fe(II). And OH was simultaneously transformed from SO4- and generated by Fe0/O2. Density functional theory (DFT) calculation was conducted to reveal special reactive sites on SMX for radicals attacking and predicted intermediates. Finally, four possible SMX degradation pathways were accordingly proposed in the Fe0/S(IV)/O2 system based on experimental methods and DFT calculation.

Removal of cephalosporin antibiotics 7-ACA from wastewater during the cultivation of lipid-accumulating microalgae.

The aim of this study is to evaluate the feasibility of using lipid-accumulating microalgae to remove cephalosporin antibiotics 7-amino cephalosporanic acid (7-ACA) from wastewater with the additional benefit of biofuels production. Three isolated microalgal strains (namely, Chlorella sp. Cha-01, Chlamydomonas sp. Tai-03 and Mychonastes sp. YL-02) were cultivated under 7-ACA stress and their biomass productivity, lipid production and N-NO3- consumption were monitored. It was found that 7-ACA had slight inhibition effects on the microalgal growth at the ratio of 12.0% (Cha-01), 9.6% (YL-02), 11.7% (Tai-03). However, lipid accumulation in the three microalgae was not influenced by the presence of 7-ACA. The investigation on the 7-ACA removal mechanisms during microalgal growth shows that 7-ACA was mainly removed by microalgae adsorption as well as hydrolysis and photolysis reactions. This study demonstrates that using microalgae to treat antibiotic-containing wastewater is promising due to the potential of simultaneous antibiotic removal and biofuel production.

Simultaneous in-situ sludge reduction and nutrient removal in an A(2)MO-M system: Performances, mechanisms, and modeling with an extended ASM2d model.

Among the existing in-situ sludge reduction processes, the oxic-settling-anaerobic (OSA) process is of particular interest because it has shown significant sludge reduction with several advantages. However, an ideal process for practical application must simultaneously incorporate effluent quality with sludge reduction. In this study, an improved OSA system, the stage-aerated anaerobic, anoxic, micro-aerobic, and oxic system combining a micro-aerobic starvation tank (abbreviated as A(2)MO-M system) was developed. Compared with OSA3# (hydraulic retention time (HRT) of 12 h), the A(2)MO-M2# system with optimized HRT of 9 h yielded almost 16.3% less sludge. The average total nitrogen (87.3%) and total phosphorus (91.9%) removal efficiencies in A(2)MO-M2# were 20.6 and 42.2% higher than those in OSA3#. Investigation of the mechanisms of sludge reduction revealed that, except for the main factors of energy uncoupling metabolism (16.7%) and sludge decay (21.2%), enrichment of slow-growing bacteria and lysis-cryptic growth metabolism analyzed by high-throughput 454 pyrosequencing were shown to contribute to sludge reduction in the A(2)MO-M system. On the basis of effluent organic matters (EfOM) measurements, soluble microbial products (SMP) were the major components in EfOM; and different reduction-oxidation (redox) potentials controlled in the OSA and A(2)MO-M systems led to different SMP formation mechanisms. To explore the mechanism and kinetics of SMP formation under different redox potentials, three new components (SUAP, SBAP, and XEPS) were integrated in an extended ASM2d model. Experimental and modeling results revealed that biomass-associated products (BAP) supported a substantial population of SMP that were quite sensitive to different redox potentials. The extended ASM2d model further illustrated that more BAP produced in the alternating anaerobic and aerobic conditions in the OSA system adversely affected its effluent quality.

Sulfamethoxazole degradation by ultrasound/ozone oxidation process in water: kinetics, mechanisms, and pathways.

In this research, sulfamethoxazole (SMX) degradation was investigated using ultrasound (US), ozone (O3) and ultrasound/ozone oxidation process (UOOP). It was proved that ultrasound significantly enhanced SMX ozonation by assisting ozone in producing more hydroxyl radicals in UOOP. Ultrasound also made the rate constants improve by kinetics analysis. When ultrasound was added to the ozonation process, the reaction rate increased by 6-26% under different pH conditions. Moreover, main intermediates oxidized by US, O3 and UOOP system were identified. Although the main intermediates in ozonation and UOOP were similar, the introduction of ultrasound in UOOP had well improved the cleavage of S-N bond. In this condition SMX become much easier to be attacked, which led to enhanced SMX removal rate in UOOP compared to the other two examined processes. Finally, the SMX degradation pathways were proposed.

Possible causes of excess sludge reduction adding metabolic uncoupler, 3,3',4',5-tetrachlorosalicylanilide (TCS), in sequence batch reactors.

Two parallel sequence batch reactors (SBRs) were operated, with and without TCS addition, to research the causes of sludge reduction by uncouplers. Three possible mechanisms of sludge reduction by TCS were studied: (1) occurrence of metabolic uncoupling, (2) consumption of more energy to resist the infection of TCS, (3) promotion of lysis-cryptic growth by TCS addition. Results showed the remarkable reduction of electronic transport system (ETS) activity and specific cellular ATP (SATP) in TCS reactor, which proved the occurrence of metabolic uncoupling. The increasing amounts of extracellular polymeric substances (EPS), as measured by chemical methods and excitation-emission matrix (EEM) fluorescence spectra, implied microorganisms consumed more energy to resist TCS. The similar DNA concentrations of the effluents in two reactors indicated sludge lysis was not intensified by TCS. Therefore, uncoupler might not only cause metabolic uncoupling but also induce more energy consumption in the production of some substances to resist uncoupler.