In Situ Inorganic/Organic Protective Layer on Carbon Paper as Advanced Current Collector for Robust Li Metal Anode.

Lithium (Li) metal is regarded as the most promising anode for next-generation batteries with high energy density. However, the uncontrolled dendrite growth and infinite volume expansion during cycling seriously hinder the application of Li metal batteries (LMBs). Herein, an inorganic/organic protective layer (labeled as BPH), composed of in situ formed inorganic constituents and PVDF-HFP, is designed on the 3D carbon paper (CP) surface by hot-dipping method. The BPH layer can effectively improve the mechanical strength and ionic conductivity of the SEI layer, which is beneficial to expedite the Li-ion transfer of the entire framework and achieve stable Li plating/stripping behavior. As a result, the modified 3D CP (BPH-CP) exhibits an ultrahigh average Coulombic efficiency (CE) of ≈99.7% over 400 cycles. Further, the Li||LiFePO4 (LFP) cell exhibits an extremely long-term cycle life of over 3000 cycles at 5 C. Importantly, the full cell with high mass loading LiFePO4 (20 mg cm-2) or LiNi0.8Co0.1Mn0.1O2 (NCM, 16 mg cm-2) cathode exhibits stable cycling for 100 or 150 cycles at 0.5 C with high-capacity retention of 86.5% or 82.0% even at extremely low N/P ratio of 0.88 or 0.94. believe that this work enlightens a simple and effective strategy for the application of high-energy-density and high-rate-C LMBs.

Sustained Release-Driven Interface Engineering Enables Fast Charging Lithium Metal Batteries.

LiNO3 has attracted intensive attention as a promising electrolyte additive to regulate Li deposition behavior as it can form favorable Li3N, LiNxOy species to improve the interfacial stability. However, the inferior solubility in carbonate-based electrolyte restricts its application in high-voltage Li metal batteries. Herein, an artificial composite layer (referred to as PML) composed of LiNO3 and PMMA is rationally designed on Li surface. The PML layer serves as a reservoir for LiNO3 release gradually to the electrolyte during cycling, guaranteeing the stability of SEI layer for uniform Li deposition. The PMMA matrix not only links the nitrogen-containing species for uniform ionic conductivity but also can be coordinated with Li for rapid Li ions migration, resulting in homogenous Li-ion flux and dendrite-free morphology. As a result, stable and dendrite-free plating/stripping behaviors of Li metal anodes are achieved even at an ultrahigh current density of 20 mA cm-2 (>570 h) and large areal capacity of 10 mAh cm-2 (>1200 h). Moreover, the Li||LiFePO4 full cell using PML-Li anode undergoes stable cycling for 2000 cycles with high-capacity retention of 94.8%. This facile strategy will widen the potential application of LiNO3 in carbonate-based electrolyte for practical LMBs.

Lithium-Ion Charged Polymer Channels Flattening Lithium Metal Anode.

The concentration difference in the near-surface region of lithium metal is the main cause of lithium dendrite growth. Resolving this issue will be key to achieving high-performance lithium metal batteries (LMBs). Herein, we construct a lithium nitrate (LiNO3)-implanted electroactive ß phase polyvinylidene fluoride-co-hexafluoropropylene (PVDF-HFP) crystalline polymorph layer (PHL). The electronegatively charged polymer chains attain lithium ions on the surface to form lithium-ion charged channels. These channels act as reservoirs to sustainably release Li ions to recompense the ionic flux of electrolytes, decreasing the growth of lithium dendrites. The stretched molecular channels can also accelerate the transport of Li ions. The combined effects enable a high Coulombic efficiency of 97.0% for 250 cycles in lithium (Li)||copper (Cu) cell and a stable symmetric plating/stripping behavior over 2000 h at 3 mA cm-2 with ultrahigh Li utilization of 50%. Furthermore, the full cell coupled with PHL-Cu@Li anode and LiFePO4 cathode exhibits long-term cycle stability with high-capacity retention of 95.9% after 900 cycles. Impressively, the full cell paired with LiNi0.87Co0.1Mn0.03O2 maintains a discharge capacity of 170.0 mAh g-1 with a capacity retention of 84.3% after 100 cycles even under harsh condition of ultralow N/P ratio of 0.83. This facile strategy will widen the potential application of LiNO3 in ester-based electrolyte for practical high-voltage LMBs.

Quantum Communications Feasibility Tests over a UK-Ireland 224 km Undersea Link.

The future quantum internet will leverage existing communication infrastructures, including deployed optical fibre networks, to enable novel applications that outperform current information technology. In this scenario, we perform a feasibility study of quantum communications over an industrial 224 km submarine optical fibre link deployed between Southport in the United Kingdom (UK) and Portrane in the Republic of Ireland (IE). With a characterisation of phase drift, polarisation stability and the arrival time of entangled photons, we demonstrate the suitability of the link to enable international UK-IE quantum communications for the first time.