Exploration of Streptomyces fradiae J1-021 as a Potential Host for the Heterologous Production of Spinosad.

Spinosad is a potent insecticide produced by Saccharopolyspora spinosa. However, it harbors certain limitations of a low growing rate and unfeasible genetic manipulation that can be overcome by adopting a superior platform, such as Streptomyces. Herein, we exploited the industrial tylosin-producing Streptomyces fradiae J1-021 for the heterologous production of spinosad. An engineered strain (HW01) with deletion of the tylosin biosynthetic gene cluster (BGC) was constructed and then transformed with the natural spinosad BGC. The distribution and expression levels of the tylosin BGC operons were assessed to construct a natural promoter library. The rate-limiting steps of spinosad biosynthesis were identified by analyzing the transcriptional expression of the spinosad biosynthetic genes. The stepwise engineering work involved the overexpression of the biosynthetic genes participating in rate-limiting pathways using strong promoters, affording an increase in spinosad production to 112.4 µg/L. These results demonstrate that strain HW01 has the potential to be used as a chassis for the heterologous production of polyketides.

Sensing at the Nanoscale Using Nitrogen-Vacancy Centers in Diamond: A Model for a Quantum Pressure Sensor.

The sensing of stress under harsh environmental conditions with high resolution has critical importance for a range of applications including earth's subsurface scanning, geological CO2 storage monitoring, and mineral and resource recovery. Using a first-principles density functional theory (DFT) approach combined with the theoretical modelling of the low-energy Hamiltonian, here, we investigate a novel approach to detect unprecedented levels of pressure by taking advantage of the solid-state electronic spin of nitrogen-vacancy (NV) centers in diamond. We computationally explore the effect of strain on the defect band edges and band gaps by varying the lattice parameters of a diamond supercell hosting a single NV center. A low-energy Hamiltonian is developed that includes the effect of stress on the energy level of a ±1 spin manifold at the ground state. By quantifying the energy level shift and split, we predict pressure sensing of up to 0.3 MPa/Hz using the experimentally measured spin dephasing time. We show the superiority of the quantum sensing approach over traditional optical sensing techniques by discussing our results from DFT and theoretical modelling for the frequency shift per unit pressure. Importantly, we propose a quantum manometer that could be useful to measure earth's subsurface vibrations as well as for pressure detection and monitoring in high-temperature superconductivity studies and in material sciences. Our results open avenues for the development of a sensing technology with high sensitivity and resolution under extreme pressure limits that potentially has a wider applicability than the existing pressure sensing technologies.

Effect of Zwitterionic Additives on Solvation and Transport of Sodium and Potassium Cations in (Ethylene Oxide)10: A Molecular Dynamics Simulation Study.

Sodium- (Na+) and potassium- (K+) ion batteries are cost-effective alternatives to lithium-ion (Li+) batteries due to the abundant sodium and potassium resources. Solid polymer electrolytes (SPEs) are essential for safer and more efficient Na+ and K+ batteries because they often exhibit low ionic conductivity at room temperature. While zwitterionic (ZW) materials enhance Li+ battery conductivity, their potential for Na+ and K+ transport in batteries remains unexplored. In this study, we investigated the effect of three ZW molecules (ChoPO4, i.e., 2-methacryloyloxyethyl phosphorylcholine, ImSO3, i.e., sulfobetaine ethylimidazole, and ImCO2, i.e., carboxybetaine ethylimidazole) on the dissociation of Na+ and K+ coordination with ethylene oxide (EO) chains in EO-based electrolytes through molecular dynamics simulations. Our results showed that ChoPO4 possessed the highest cation-EO10 dissociation ability, while ImSO3 exhibited the lowest. Such dissociation ability correlated with the cation-ZW molecule coordination strength: ChoPO4 and ImSO3 showed the strongest and the weakest coordination with cations. However, the cation-ZW molecule coordination could slow the cationic diffusion. The competition of these effects resulted in accelerating or decelerating cationic diffusion. Our simulated results showed that ImCO2 enhanced Na+ diffusion by 20%, while ChoPO4 and ImSO3 led to a 10% reduction. For K+, ChoPO4 reduced its diffusion by 40%, while ImCO2 and ImSO3 caused a similar decrease of 15%. These findings suggest that the ZW structure and the cationic size play an important role in the ionic dissociation effect of ZW materials.

Redox Chemistry of the Subphases of α-CsPbI2Br and ß-CsPbI2Br: Theory Reveals New Potential for Photostability.

The logic in the design of a halide-mixed APb(I1−xBrx)3 perovskite is quite straightforward: to combine the superior photovoltaic qualities of iodine-based perovskites with the increased stability of bromine-based perovskites. However, even small amounts of Br doped into the iodine-based materials leads to some instability. In the present report, using first-principles computations, we analyzed a wide variety of α-CsPbI2Br and ß-CsPbI2Br phases, compared their mixing enthalpies, explored their oxidative properties, and calculated their hole-coupled and hole-free charged Frenkel defect (CFD) formations by considering all possible channels of oxidation. Nanoinclusions of bromine-rich phases in α-CsPbI2Br were shown to destabilize the material by inducing lattice strain, making it more susceptible to oxidation. The uniformly mixed phase of α-CsPbI2Br was shown to be highly susceptible towards a phase transformation into ß-CsPbI2Br when halide interstitial or halide vacancy defects were introduced into the lattice. The rotation of PbI4Br2 octahedra in α-CsPbI2Br allows it either to transform into a highly unstable apical ß-CsPbI2Br, which may phase-segregate and is susceptible to CFD, or to phase-transform into equatorial ß-CsPbI2Br, which is resilient against the deleterious effects of hole oxidation (energies of oxidation >0 eV) and demixing (energy of mixing <0 eV). Thus, the selective preparation of equatorial ß-CsPbI2Br offers an opportunity to obtain a mixed perovskite material with enhanced photostability and an intermediate bandgap between its constituent perovskites.

Elucidating the Reaction Pathways of Veratrylglycero-ß-Guaiacyl Ether Degradation over Metal-Free Solid Acid Catalyst with Hydrogen.

Efficient cleavage of ß-O-4 bonds in lignin to high-yield aromatic compounds for the potential production of fuels and chemicals is vital for the economics of the modern biorefinery industry. This work is distinct in that a detailed mechanistic analysis of the reaction pathways of veratrylglycero-ß-guaiacyl ether (VGE) catalyzed by transition-metal-free solid acid zeolite in aqueous conditions at high hydrogen pressure has been performed. VGE degradation produced high monomers yields (≈87 %), including guaiacol (48.2 %), 1-(3,4-dimethoxyphenyl)ethanol (10.3 %), 1-(3,4-dimethoxyphenyl)-2-propanol (6.1 %), 3,4-dimethoxyphenylpropanol (4.7 %), 3,4-dimethoxycinnamyl alcohol (4.1 %), and 1,2-dimethoxy-4-propylbenzene (2 %). The products were identified and confirmed by the in situ solid-state magic angle spinning (MAS) 13 C NMR spectroscopy in real-time conditions and the two-dimensional gas chromatography (GC×GC). A variety of products reveal the crucial role of hydrogen, water, and acid sites for heterolytic cleavage of the ß-O-4 bond in VGE. Decarbonylation, hydrogenolysis, hydrogenation, and dehydration reaction pathways are proposed and further validated using first-principles calculations.

Highly Efficient Biotransformation and Production of Selenium Nanoparticles and Polysaccharides Using Potential Probiotic Bacillus subtilis T5

Selenium is an essential microelement required for human health. The biotransformation of selenium nanoparticles has attracted increasing attention in recent years. However, little of the literature has investigated the comprehensive evaluation of the strains for practical application and the effect on the functional properties in the existence of Se. The present study showed the selenite reduction strain Bacillus subtilis T5 (up to 200 mM), which could produce high yields of selenium polysaccharides and selenium nanoparticles in an economical and feasible manner. Biosynthesized selenium nanoparticles by B. subtilis T5 were characterized systematically using UV-vis spectroscopy, FTIR, Zeta Potential, DLS, and SEM techniques. The biosynthesized SeNPs exhibited high stability with small particle sizes. B. subtilis T5 also possessed a tolerance to acidic pH and bile salts, high aggregation, negative hemolytic, and superior antioxidant activity, which showed excellent probiotic potential and can be recommended as a potential candidate for the selenium biopharmaceuticals industry. Remarkably, B. subtilis T5 showed that the activity of α-amylase was enhanced with selenite treatment to 8.12 U/mL, 2.72-fold more than the control. The genus Bacillus was first reported to produce both selenium polysaccharides with extremely high Se-content (2.302 g/kg) and significantly enhance the activity to promote α-amylase with selenium treatment. Overall, B. subtilis T5 showed potential as a bio-factory for the biosynthesized SeNPs and organ selenium (selenium polysaccharide), providing an appealing perspective for the biopharmaceutical industry.

Enhancing the Activity of Carboxymethyl Cellulase Enzyme Using Highly Stable Selenium Nanoparticles Biosynthesized by Bacillus paralicheniformis Y4.

The inorganic selenium is absorbed and utilized inefficiently, and the range between toxicity and demand is narrow, so the application is strictly limited. Selenium nanoparticles have higher bioactivity and biosafety properties, including increased antioxidant and anticancer properties. Thus, producing and applying eco-friendly, non-toxic selenium nanoparticles in feed additives is crucial. Bacillus paralicheniformis Y4 was investigated for its potential ability to produce selenium nanoparticles and the activity of carboxymethyl cellulases. The selenium nanoparticles were characterized using zeta potential analyses, Fourier transform infrared (FTIR) spectroscopy, and scanning electron microscopy (SEM). Additionally, evaluations of the anti-α-glucosidase activity and the antioxidant activity of the selenium nanoparticles and the ethyl acetate extracts of Y4 were conducted. B. paralicheniformis Y4 exhibited high selenite tolerance of 400 mM and the selenium nanoparticles had an average particle size of 80 nm with a zeta potential value of -35.8 mV at a pH of 7.0, suggesting that the particles are relatively stable against aggregation. After 72 h of incubation with 5 mM selenite, B. paralicheniformis Y4 was able to reduce it by 76.4%, yielding red spherical bio-derived selenium nanoparticles and increasing the carboxymethyl cellulase activity by 1.49 times to 8.96 U/mL. For the first time, this study reports that the carboxymethyl cellulase activity of Bacillus paralicheniforis was greatly enhanced by selenite. The results also indicated that B. paralicheniformis Y4 could be capable of ecologically removing selenite from contaminated sites and has great potential for producing selenium nanoparticles as feed additives to enhance the added value of agricultural products.

Critical review of functionalized silica sorbent strategies for selective extraction of rare earth elements from acid mine drainage.

The ubiquitous and growing global reliance on rare earth elements (REEs) for modern technology and the need for reliable domestic sources underscore the rising trend in REE-related research. Adsorption-based methods for REE recovery from liquid waste sources are well-positioned to compete with those of solvent extraction, both because of their expected lower negative environmental impact and simpler process operations. Functionalized silica represents a rising category of low cost and stable sorbents for heavy metal and REE recovery. These materials have collectively achieved high capacity and/or high selective removal of REEs from ideal solutions and synthetic or real coal wastewater and other leachate sources. These sorbents are competitive with conventional materials, such as ion exchange resins, activated carbon; and novel polymeric materials like ion-imprinted particles and metal organic frameworks (MOFs). This critical review first presents a data mining analysis for rare earth element recovery publications indexed in Web of science, highlighting changes in REE recovery research foci and confirming the sharply growing interest in functionalized silica sorbents. A detailed examination of sorbent formulation and operation strategies to selectively separate heavy (HREE), middle (MREE), and light (LREE) REEs from the aqueous sources is presented. Selectivity values for sorbents were largely calculated from available figure data and gauged the success of the associated strategies, primarily: (1) silane-grafted ligands, (2) impregnated ligands, and (3) bottom-up ligand/silica hybrids. These were often accompanied by successful co-strategies, especially bite angle control, site saturation, and selective REE elution. Recognizing the need to remove competing fouling metals to achieve purified REE "baskets," we highlight techniques for eliminating these species from acid mine drainage (AMD) and suggest a novel adsorption-based process for purified REE extraction that could be adapted to different water systems.

Assessing the Effects of Temperature and Oxygen Vacancy on Band Gap Renormalization in LaCrO3-δ: First-Principles and Experimental Corroboration.

Understanding the temperature dependence of functional properties in high-temperature gas sensors is vital for applications in combustion environments. Temperature effect on the electronic structure due to electron-phonon coupling is a key property of interest as this influences other responses of sensors. In this work, we assess the impact of temperature on band gap renormalization of pristine and oxygen-vacant LaCrO3-δ perovskite employing Allen-Heine-Cardona theory with first-principles simulations and corroborate with experimental observation. Antiferromagnetic cubic LaCrO3 shows a direct ground-state band gap of 2.62 eV that is reduced by over 1 eV due to the presence of oxygen vacancies, which can form endothermically. We find excellent agreement in temperature-dependent band gap shift in LaCrO3 between theory and an in-house experiment, proving that the theory can adequately predict renormalization on the band gap in a magnetic system. Band gaps in cubic LaCrO3-δ are found to monotonically narrow by 1.13 eV in pristine and by around 0.62 eV in oxygen-vacant structures as temperature increases from 0 to 1500 K. The predicted band gap variations are rationalized using an analytical model. The experimental zero-temperature band gaps are extracted from the model fits that can provide useful insights on the simulated band gaps.

Real-time observation of the thermo-optical and heat dissipation processes in microsphere resonators.

This work reports the real-time observation of the thermo-optical dynamics in silica microsphere resonators based on the dispersive time stretch technique. In general, the thermo-optical dynamics of silica microsphere resonators, including the thermal refraction and thermal expansion, can be characterized by the resonance wavelength shift, whose duration is at the millisecond timescale. However, this fast wavelength shift process cannot be directly captured by conventional spectroscopy, and only its transmission feature can be characterized by a fast-scanning laser and an intensity detector. With the advance of the time-stretch spectroscopy, whose temporal resolution is up to tens of nanoseconds, the thermo-optical dynamics can be observed in a more straight-forward way, by utilizing the pump-probe technology and mapping the resonance wavelength to the time domain. Here, the thermo-optical dynamics are explored as a function of the power and the scanning rate of the pump laser. Theoretical simulations reproduce the experimental results, revealing that the thermo-optical dynamics of silica microsphere resonators is dominated by the fast thermo-optical effect and the slow heat dissipation process to the surroundings, which leads to gradual regression of the resonance wavelength. This work provides an alternative solution for studying the thermo-optical dynamics in whispering gallery mode microresonators, which would be crucial for future applications of microresonator photonic systems.

Investigation of Sr0.7 Ca0.3 FeO3 Oxygen Carriers with Variable Cobalt B-Site Substitution.

A-site and B-site substitutions are effective methods towards improving well-studied oxygen carrier materials that are vital for emerging gasification technologies. Such materials include SrFeO3 , which greatly benefits from the inclusion of calcium and/or cobalt, and Sr0.8 Ca0.2 Fe0.4 Co0.6 O3 has been regarded as the best-performing composition. In this study, systems with higher calcium and lower cobalt contents are investigated with a view to lessening the societal and economic burdens of these dual-doped carriers. Density functional theory calculations are performed to illustrate the Fe-O bonding and relaxation contributions to the oxygen vacancy formation energy in Sr1-x Cax Fe1-y Coy O3 systems (x=0.1875, 0.25, 0.3125; y=0.125, 0.25, 0.375, 0.5) and determine that increased calcium A-site substitution requires the use of less cobalt B-site doping to reach the same oxygen vacancy formation. These findings are experimentally validated in situ and ex situ characterization of bulk Sr0.7 Ca0.3 Fe1-y Coy O3 materials. Sr0.7 Ca0.3 Fe0.7 Co0.3 O3 is found to have similar O2 adsorption/desorption rates and storage capacity to Sr0.8 Ca0.2 Fe0.4 Co0.6 O3 in air/N2 cycling experiments. Additionally, both materials are outperformed by Sr0.7 Ca0.3 Fe1-y Coy O3 systems with y=0-0.10 at 400-500 °C, which cycle 1.5 wt% O2 in under ten minutes.

Electronic and optical properties of orthorhombic (CH3NH3)BX3 (B = Sn, Pb; X = F, Cl, Br, I) perovskites: a first-principles investigation.

Lead halide perovskites have generated considerable interest in solar cell, sensor, and electronics applications. While great focus has been placed on (CH3NH3)PbI3, an organic-inorganic hybrid perovskite, comparatively little work has been done to understand some of its existing crystal phases and analogous materials after substituting with Sn and/or other halogens in the framework. Here, first-principles density functional theory calculations are performed to comprehensively evaluate the electronic and optical properties of (CH3NH3)BX3 (B = Sn, Pb; X = F, Cl, Br, I) in a low-temperature orthorhombic phase. Bulk modulus, electronic structures, and several optical properties of these perovskite systems are further calculated. The obtained results are first confirmed by comparing with existing perovskite systems in literature. The shifting trends on those physical properties when extending to other barely studied systems of (CH3NH3)BX3 is further revealed. The band gap of these perovskites is found to decrease when varying halogen anion in "X" sites from F to I, and/or substituting Pb cations with Sn in "B" sites. Notably, the less toxic Sn-containing perovskites, (CH3NH3)SnI3 in particular, display higher absorption coefficients in the visible light range than their Pb-containing counterparts. An orthorhombic (CH3NH3)PbF3 is predicted to exist at low temperature, and adsorb strongly UV energy. Our systematical examination efforts on the two groups of perovskites provide valuable physical insights in these materials, and the accompanied new findings warrant further investigation on such subjects.

First-principles exploration of oxygen vacancy impact on electronic and optical properties of ABO3-δ (A = La, Sr; B = Cr, Mn) perovskites.

ABO3-δ perovskites are utilized in many applications including optical gas sensing for energy systems. Understanding the opto-electronic properties allows rational selection of the perovskite-based sensors from a diverse family of ABO3-δ perovskites, associated with the choices of A and B cations and range of oxygen concentrations. Herein, we assess the impact of oxygen vacancies on the electronic structure and optical response of pristine and oxygen-vacant ABO3-δ (A = La, Sr; B = Cr, Mn) perovskites via first-principles calculations. The endothermic formation energy for oxygen vacancies shows that the generation of ABO3-δ defect structures is thermodynamically possible. LaCrO3 and LaMnO3 have direct and indirect ground-state band gaps, respectively, whereas SrCrO3 and SrMnO3 are metallic. In the presence of an oxygen mono-vacancy, however, the band gap decreases in LaCrO3-δ and vanishes in LaMnO3-δ. In contrast to the decrease in the band gaps, the oxygen vacancies in ABO3-δ are found to increase optical absorption in the visible to near-infrared wavelength regime, and thus lower the onset energy of absorption compared with the pristine materials. Our assessments emphasize the role of the oxygen vacancy, or other possible oxygen non-stoichiometry defects, in perovskite oxides with respect to the opto-electronic performance parameters that are of interest for optical gas sensors for energy generation process environments.

The optimal co-doping of SrFe1-xCoxO3-δ oxygen carriers in redox applications.

Although the oxygen carrier SrCoO3 has higher redox activity than SrFeO3, cobalt is both more expensive and scarcer than iron, which would hinder the wide implementation of SrCoO3. For these reasons, doping SrFeO3 with Co is a potential compromise, benefitting the redox properties of SrFeO3, while still limiting the overall amount of cobalt being used. To find the optimal level of Co-doping, density functional theory calculations were performed to investigate the Co-doping effect on the oxygen vacancy formation and oxygen migration in SrFe1-xCoxO3-δ (x = 0, 0.125, 0.25, 0.375, 0.5). Our findings show that the oxygen vacancy formation energies (Ef) decrease with the increase of Co content resulting from the increased composition of the O-2p band at the Fermi level upon Co doping. In particular, the Ef decreases nearly 0.5 eV between the x = 0 and x = 0.25 samples while Ef only decreases 0.1 eV further as Co content is increased to x = 0.5. We obtain that x = 0.25 is an optimal cost/benefit ratio for Co doping, which is preserved at both low oxygen vacancy concentrations (δ = 0.0625 values listed above) and at high concentrations of δ = 0.1875 and 0.375. Kinetically, the oxygen migration barrier has slight change upon Co doping due to the similar size of Co and Fe. Therefore, considering both redox activity and economics in reversible oxygen storage applications, x = 0.25 is suggested as the optimal Co-doping value in SrFe1-xCoxO3-δ.

Theoretical and experimental study of temperature effect on electronic and optical properties of TiO2: comparing rutile and anatase.

To gain fundamental understanding of the high-temperature optical gas-sensing and light-energy conversion materials, we comparatively investigate the temperature effects on the band gap and optical properties of rutile and anatase TiO2 experimentally and theoretically. Given that the electronic structures of rutile and anatase are fundamentally different, i.e. direct band gap in rutile and indirect gap in anatase, it is not clear whether these materials exhibit different electronic structure renormalizations with temperature. Using ab initio methods, we show that the electron-phonon interaction is the dominant factor for temperature band gap renormalization compared to the thermal expansion. As a result of different contributions from the acoustic and optical phonons, the band gap is found to widen with temperature up to 300 K, and to narrow at higher temperatures. Our calculations suggest that the band gap is narrowed by about 147 meV and 128 meV at 1000 K for rutile and anatase, respectively. Experimentally, for rutile and anatase TiO2 thin films we conducted UV-Vis transmission measurements at different temperatures, and analyzed band gaps from the Tauc plots. For both TiO2 phases, the band gap is found to decrease for temperature above 300 K quantitatively, agreeing with our theoretical results. The temperature effects on the dielectric functions, the refractive index, the extinction coefficient as well as the optical conductivity are also investigated. Rutile and anatase show generally similar optical properties, but differences exist in the long wavelength regime above 600 nm, where we found that the dielectric function of rutile decreases while that of anatase increases with temperature increase.

Anharmonicity Explains Temperature Renormalization Effects of the Band Gap in SrTiO3.

Soft phonon modes in strongly anharmonic crystals are often neglected in calculations of phonon-related properties. Herein, we experimentally measure the temperature effects on the band gap of cubic SrTiO3, and compare with first-principles calculations by accounting for electron-phonon coupling using harmonic and anharmonic phonon modes. The harmonic phonon modes show an increase in the band gap with temperature using either Allen-Heine-Cardona theory or finite-displacement approach, and with semilocal or hybrid exchange-correlation functionals. This finding is in contrast with experimental results that show a decrease in the band gap with temperature. We show that the disagreement can be rectified by using anharmonic phonon modes that modify the contributions not only from the significantly corrected soft modes, but also from the modes that show little correction in frequencies. Our results confirm the importance of soft-phonon modes that are often neglected in the computation of phonon-related properties and particularly in electron-phonon coupling.

Theoretical study of the optical and thermodynamic properties of LaxSr1-xCo1-yFeyO3-δ (x/y = 0.25, 0.5, 0.75) perovskites.

The performance of LaxSr1-xCo1-yFeyO3-δ perovskite systems in applications such as solid oxide fuel cells and catalysis is related to the proportion of substitution atoms. Using a density functional theory method, we investigate the doping effect on the electronic, optical, and thermodynamic properties of LaxSr1-xCo1-yFeyO3-δ (x/y = 0.25, 0.5, 0.75). Our results show that La doping introduces an empty state and pushes the Fermi level upwards. The doping Fe derived states locate away from the Fermi level as compared with Co states. From the results of optical absorption, the peak at 200-300 nm is enhanced and experiences a blue-shift with increasing La concentration. The corresponding peak at 400-700 nm also shows a blue-shift induced by both La and Fe doping, and it could be enhanced by Fe doping while being suppressed by La doping. And the peak above 1500 nm is enhanced by the cooperation of La and Fe doping. From thermodynamic calculations via an Ellingham diagram, it is found that the parent SrCoO3 is the most favorable composition for releasing O2, with both La and Fe doping hampering the reduction reaction. Therefore, the optical and thermodynamic properties of LaxSr1-xCo1-yFeyO3-δ could be adjusted by special doping values.

Temporally structured illumination for ultrafast time-stretch microscopy.

This work developed a temporally structured illumination scheme to conquer the detector bandwidth limitation that is increasingly becoming a stumbling block of ultrafast single-pixel measurement. Inspired by structured illumination microscopy and space-time duality, an electro-optic modulator resembling the temporal counterpart of a spatial grating is used to impart a sinusoidal pattern onto the time-stretch signal before detection. Consequently, the detector bandwidth is equivalently doubled based on three measurements and a subsequent reconstruction, thereby capturing the high-frequency components originally beyond the detector bandwidth. As a proof of concept, this method is applied to an ultrafast single-pixel imaging modality, the time-stretch microscopy, to verify its capability to surpass the resolution limit imposed by the detector bandwidth. High-quality images with ∼4.0 µm spatial resolution are acquired at ∼30 MHz frame rates by merely half of the detector bandwidth, compared to the traditional system. This Letter provides a simple and economical solution for high-speed signal acquisition, which is demanded in a variety of applications, ranging from ultrafast imaging to single-shot spectroscopy.

The influence of oxygen vacancy on the electronic and optical properties of ABO3-δ (A = La, Sr, B = Fe, Co) perovskites.

ABO3-δ (A = La, Sr, B = Fe, Co) perovskites are useful in a wide range of applications, including their recent exploration for application in high-temperature optical oxygen sensing for energy conversion devices such as solid oxide fuel cells. To elucidate the dependence of functional properties and oxygen vacancy formation on defect chemistry and composition, first principles calculations are presented. The obtained results show that oxygen vacancy (VO) formation energies are in the order of LaFeO3 > LaCoO3 > SrFeO3 > SrCoO3. Furthermore, the influence of VO on the electronic and optical properties is investigated for the high temperature stable phases (T = 1100 K). For the LaFeO3 insulator, the VO donated electrons are all localized on the down-spin d3z2-r2 orbitals of the nearest Fe ions. These defect states located in the band gap induce a drop in the energy onset of absorption as pristine bulk → V2+O → V1+O → V0O, and especially, an extra absorption peak appears between 0.5 and 1.5 eV due to V0O and V1+O formation. In the rest of the crystals that expressed a metallic feature, the VO donated electrons partially localize on the down-spin d3z2-r2 orbital and partially delocalize through the lattice, by which the absorption peaks (0.5-2.0 eV for LaCoO3, 0.0-0.5 eV for SrFeO3 and SrCoO3) from the electronic excitation near the Fermi level are enhanced. A high VO concentration of oxygen divacancy in SrFeO3 and SrCoO3 could enhance charge localization on down-spin d3z2-r2 orbitals, resulting in a remarkable increase of optical absorption at 1.5-3.0 eV.

Calibration-free time-stretch optical coherence tomography with large imaging depth.

We demonstrate a calibration-free time-stretch optical coherence tomography (TS-OCT), based on an optical higher order dispersion compensation scheme, which substitutes the digital calibration with optical dispersion compensation. As a result, the acquired raw data can directly perform the Fourier transform, and data processing time is greatly reduced by 82%, compared with the digital calibration. Moreover, because of the high-sensitivity and calibration-free characteristics, the high-order dispersion compensation-based TS-OCT can increase sensitivity roll-off by 2.6 times to 6.91 mm/dB and effective imaging depth by 14.2% to 16 mm. The in vivo biological tissue imaging has been demonstrated, with the single-shot A-scan rate approaching 19 MHz. This higher order dispersion compensation scheme could provide a promising solution for the TS-OCT system to realize 3D imaging in real time and enhanced imaging quality.