RESUMO
Li(Ni0.80Co0.15Al0.05)O2 is a lithium-ion battery cathode, commercially available for more than twenty years, which is associated with high energy capacity and high energy density, with moderate power. Atomic layer fluorination (ALF) of Li(Ni0.80Co0.15Al0.05)O2 with XeF2 is performed to improve its cyclability. The ALF method aims at forming an efficient protecting fluorinated layer at the surface of the material, with a low fluorine content. Surface fluorinated Li(Ni0.80Co0.15Al0.05)O2 is characterized by X-ray diffraction, electron microscopy, 19F nuclear magnetic resonance, X-ray photoelectron spectroscopy, and galvanostatic measurements, and a fluorine content as low as 1.4 wt% is found. The presence of fluorine atoms improves the electrochemical performances of Li(Ni0.80Co0.15Al0.05)O2: cyclability, polarization and rate capability are improved. Operando infrared spectroscopy and post-mortem gas chromatography provide some insights into the origins of these improvements.
RESUMO
In order to prepare self-standing and flexible slow neutron reflectors made of graphite fluoride (GF) with high contents of (C2F)n structural phase, graphite foils of different thicknesses were used as starting materials for gas (F2)/solid fluorination. The maximal interlayer distance of GF was obtained with this phase thanks to the stacking sequence FCCF/FCCF; this is mandatory for the efficient reflection of slow neutrons. 71 and 77% of the (C2F)n phase were achieved for graphite foils with thicknesses of 1.0 and 0.1 mm, respectively. The interlayer distances were 8.6 Å as expected. The fluorination conditions (static mode, a long duration of 24 h, annealing in pure F2 gas for 24 h, and temperatures in the 390-460 °C range) were adapted to large pieces of graphite foils (7 × 7 cm2) in order to both avoid exfoliation and achieve a homogeneous dispersion of fluorine atoms. This process was also efficient for thinner (0.01 mm thick) graphitized graphene oxide foil. 56% of the (C2F)n phase and an interlayer of 8.6 Å were achieved for this foil when fluorination was performed at 430 °C. Whatever the nature and the thickness of the foil, their flexibilities are maintained.
RESUMO
Sub-fluorinated carbon nanofibers (F-CNFs) can be described as a non-fluorinated core surrounded by a fluorocarbon lattice. The core ensures the electron flux in the cathode during the electrochemical discharge in the primary lithium battery, which allows a high-power density to be reached. The ball-milling in an inert gas (Ar) of these F-CNFs adds a second level of conductive sp2 carbons, i.e., a dual sub-fluorination. The opening of the structure changes, from one initially similar multi-walled carbon nanotube to small lamellar nanoparticles after milling. The power densities are improved by the dual sub-fluorination, with values of 9693 W/kg (3192 W/kg for the starting material). Moreover, the over-potential of low depth of discharge, which is typical of covalent CFx, is suppressed thanks to the ball-milling. The energy density is still high during the ball-milling, i.e., 2011 and 2006 Wh/kg for raw and milled F-CNF, respectively.
RESUMO
More than 15 years ago, the study of nanodiamond (ND) powders as a material for designing reflectors of very cold neutrons (VCNs) and cold neutrons (CNs) began. Such reflectors can significantly increase the efficiency of using such neutrons and expand the scope of their application for solving applied and fundamental problems. This review considers the principle of operation of VCN and CN reflectors based on ND powders and their advantages. Information is presented on the performed experimental and theoretical studies of the effect of the size, structure, and composition of NDs on the efficiency of reflectors. Methods of chemical and mechanical treatments of powders in order to modify their chemical composition and structure are discussed. The aim is to avoid, or at least to decrease, the neutron inelastic scatterers and absorbers (mainly hydrogen atoms but also metallic impurities and nitrogen) as well as to enhance coherent elastic scattering (to destroy ND clusters and sp2 carbon shells on the ND surface that result from the preparation of NDs). Issues requiring further study are identified. They include deeper purification of NDs from impurities that can be activated in high radiation fluxes, the stability of NDs in high radiation fluxes, and upscaling methods for producing larger quantities of ND powders. Possible ways of solving these problems are proposed.
RESUMO
PURPOSE: We propose a comprehensive workflow to design and build fully customized dense receive arrays for MRI, providing prediction of SNR and g-factor. Combined with additive manufacturing, this method allows an efficient implementation for any arbitrary loop configuration. To demonstrate the methodology, an innovative two-layer, 32-channel receive array is proposed. METHODS: The design workflow is based on numerical simulations using a commercial 3D electromagnetic software associated with circuit model co-simulations to provide the most accurate results in an efficient time. A model to compute the noise covariance matrix from circuit model scattering parameters is proposed. A 32-channel receive array at 7 T is simulated and fabricated with a two-layer design made of non-geometrically decoupled loops. Decoupling between loops is achieved using home-built direct high-impedance preamplifiers. The loops are 3D-printed with a new additive manufacturing technique to speed up integration while preserving the detailed geometry as simulated. The SNR and parallel-imaging performances of the proposed design are compared with a commercial coil, and in vivo images are acquired. RESULTS: The comparison of SNR and g-factors showed a good agreement between simulations and measurements. Experimental values are comparable with the ones measured on the commercial coil. Preliminary in vivo images also ensured the absence of any unexpected artifacts. CONCLUSION: A new design and performance analysis workflow is proposed and tested with a non-conventional 32-channel prototype at 7 T. Additive manufacturing of dense arrays of loops for brain imaging at ultrahigh field is validated for clinical use.
Assuntos
Imageamento por Ressonância Magnética , Neuroimagem , Imagens de Fantasmas , Desenho de Equipamento , Razão Sinal-Ruído , Imageamento por Ressonância Magnética/métodos , Fenômenos Eletromagnéticos , Encéfalo/diagnóstico por imagemRESUMO
PURPOSE: Testing an RF coil prototype on subjects involves laborious verifications to ensure its safety. In particular, it requires preliminary electromagnetic simulations and their validations on phantoms to accurately predict the specific absorption rate (SAR). For coil design validation with a simpler safety procedure, the restricted SAR (rS) mode is proposed, enabling representative first experiments in vivo. The goal of the developed approach is to accelerate the transition of a custom coil system from prototype to clinical use. METHODS: The restricted specific absorption rate (SAR) (rS) mode imposes a radical limitation on the transmitted RF power based on a worst-case scenario of local RF power absorption. The limitations used are independent of the SAR spatial distribution, making this approach unconditionally safe. The developed rS protocol contains the sequences required for coil evaluation and satisfies the imposed rS conditions. It provides a quantitative characterization of the coil transmission and reception profiles and a qualitative evaluation of the anatomical images. Protocol validation was performed on commercial and pre-industrial prototype coils on a small cohort of healthy volunteers. RESULTS: The proposed rS protocol enables coil evaluation within an acquisition time compatible with common clinical protocol duration. The total time of all evaluation steps does not exceed 17 min. At the same time, the global SAR remains 100 times less than the International Electrotechnical Commission safety limit for played sequences. CONCLUSION: The rS protocol allows characterizing and comparing coil prototypes on volunteers without extensive electromagnetic calculations and phantom validations in an unconditionally safe way.
Assuntos
Imageamento por Ressonância Magnética , Ondas de Rádio , Humanos , Imageamento por Ressonância Magnética/métodos , Imagens de FantasmasRESUMO
Thanks to their high initial electrochemical properties and broad compositional flexibility, lithium-rich disordered rocksalt cathode-active materials including high-performance manganese-only materials appear as a potential replacement to the cobalt-based current market leader "NMC" material. The main issue with these materials is their lack of stability. However, recent works have identified bulk fluorination as a potential solution to stabilize these compounds. There is, however, a clear lack of diversity in fluorination agents used to synthesize these disordered rocksalts, as most publications used LiF, a very stable compound. To achieve manganese-only materials, manganese oxyfluorides represent promising precursors, but the literature reports only MnO3F and Mn2O2F9, which are both unstable and hazardous. The present study develops several strategies for synthesis and a tailored characterization methodology to explore the chemical space of direct fluorination of manganese oxide MnO with molecular fluorine and shows how to tune its reactivity to achieve a range of novel, safe, and finely tunable manganese oxyfluorides of general formula MnOFx, with x going from 0 to 1 synthesized via a fluorine insertion mechanism.
RESUMO
Medical devices (MD) are often made of plasticized polyvinylchloride (PVC). However, plasticizers may leach out into infused solutions and expose the patients to a toxic risk. The aim of the present work is to fluorinate plasticized PVC tubular MDs to create a barrier layer on their internal surface, and to study the impact of such a chemical treatment on the migration of the plasticizers. Following fluorination by pure molecular fluorine, the physico-chemical characterization of these modified MDs was carried out using various spectroscopic and microscopic techniques or tensile tests, evidencing the formation of covalent C-F bonds on the surface of the treated samples without modification of their mechanical and optical properties. The migration of plasticizers from fluorinated MDs was assessed using gas chromatography coupled with mass spectrometry and was found considerably decreased in comparison with the pristine MDs. After 24 h, the amount of tri-octyltrimellitate plasticizer (TOTM) detected in migrates from fluorinated MDs was even lower than the limit of quantification. Complementary cytotoxicity assays were performed according to the ISO EN 10993-5 standard, showing that the new fluorinated material does not cause a cytotoxic effect on L929 cells.
Assuntos
Dietilexilftalato , Plastificantes , Humanos , Plastificantes/química , Halogenação , Cromatografia Gasosa-Espectrometria de Massas/métodos , Cloreto de Polivinila/química , Espectrometria de Massas , Dietilexilftalato/toxicidade , Dietilexilftalato/análise , Dietilexilftalato/químicaRESUMO
BACKGROUND: The retina is recognized as an accessible part of the brain due to their common embryonic origin. The electroretinogram (ERG) has proven to be a valuable tool for detecting schizophrenia and bipolarity. We therefore investigated its ability to detect ADHD. METHODS: The cone and rod luminance response functions of the ERG were recorded in 26 ADHD subjects (17 women and 9 men) and 25 controls (16 women and 9 men). RESULTS: No significant differences were found between the mixed groups, but sexual dysmorphia was observed in the significant results. In males, a significant prolonged cone a-wave latency was observed in the ADHD group. In females, we observed a significant decrease in the cone a- and b-wave amplitudes and a trend for a prolonged cone b-wave latency as well as a higher scotopic mixed rod-cone a-wave in the ADHD group. CONCLUSION: The data obtained in this study show the potential of the ERG to detect ADHD, warranting further large-scale studies.
Assuntos
Transtorno do Deficit de Atenção com Hiperatividade , Eletrorretinografia , Masculino , Humanos , Feminino , Eletrorretinografia/métodos , Retina/fisiologia , Visão Ocular , Biomarcadores , Estimulação Luminosa/métodos , Regulador Transcricional ERGRESUMO
In the era of minimally invasive surgery, the role of sublobar resection comprising anatomical segmentectomy and wide wedge excision remains controversial [...].
RESUMO
For over 10 years, several bolometer sensors with different properties have been tested in the IBOVAC facility. The aim has been to develop a bolometer sensor that can be operated in ITER and can withstand harsh operating conditions. For this purpose, important physical properties of the sensors, i.e., cooling time constant τ, normalized heat capacity κ, and normalized sensitivity sn, have been characterized in a vacuum condition and at various temperatures up to 300 °C. The calibration is achieved by ohmic heating of the sensor absorbers by applying a DC voltage and recording exponential current fall during heating. Recently, a Python program was developed to analyze the data and extract the above mentioned parameters including the uncertainties from recorded currents. In the present series of experiments, the latest prototype sensors developed for ITER are tested and evaluated. These include three different sensor types: two with Au absorbers on ZrO2 membranes (self-supporting substrate sensors) and one with Au absorbers on Si3N4 membranes supported by a Si frame (supported membrane sensors). Tests revealed that the sensor with ZrO2 substrate can only be operated up to 150 °C, while the supported membrane sensors passed the tests up to 300 °C successfully. These results will be used, together with other upcoming tests, such as irradiation testing, to select the most suitable sensors to be employed in ITER.
RESUMO
OBJECTIVE: The aim of the study is to assess whether a blue-enriched light intervention improves nocturnal alertness and daytime sleep of night workers. METHODS: Thirteen miners performing 12-hour night shifts for 12 consecutive nights were exposed to a baseline and a blue-enriched light condition. All subjects wore an actigraph and completed a Psychomotor Vigilance Task at the beginning and at the end of each shift. Data were analyzed with linear mixed models. RESULTS: In the blue-enriched light condition, the daily increase in median reaction time (RT), mean RT, slowest 10% of RT, and fastest 10% of RT was lower than that observed in the baseline condition between day 1 and 12 ( P ≤ 0.05). CONCLUSIONS: The addition of blue-enriched light during a long period of extended night shifts counteracts most of the daily decline in nocturnal alertness observed in the standard lighting condition, irrespectively of sleep duration and sleep efficiency.
Assuntos
Mineradores , Sono , Humanos , Ritmo Circadiano , Tolerância ao Trabalho Programado , AtençãoRESUMO
Nanomaterials can intensively scatter and/or reflect radiation. Such processes and materials are of theoretical and practical interest. Here, we study the quasi-specular reflections (QSRs) of cold neutrons (CNs) and the reflections of very cold neutrons (VCNs) from nanodiamond (ND) powders. The fluorination of ND increased its efficiency by removing/replacing hydrogen, which is otherwise the dominant cause of neutron loss due to incoherent scattering. The probability of the diffuse reflection of VCNs increased for certain neutron wavelengths by using appropriate ND sizes. Based on model concepts of the interaction of CNs with ND, and in reference to our previous work, we assume that the angular distribution of quasi-specularly reflected CNs is narrower, and that the probability of QSRs of longer wavelength neutrons increases if we increase the characteristic sizes of NDs compared to standard detonation nanodiamonds (DNDs). However, the probability of QSRs of CNs with wavelengths below the cutoff of ~4.12 Å decreases due to diffraction scattering on the ND crystal lattice. We experimentally compared the QSRs of CNs from ~4.3 nm and ~15.0 nm ND. Our qualitative conclusions and numerical estimates can help optimize the parameters of ND for specific practical applications based on the QSRs of CNs.
RESUMO
A graphite-mediated microwave-based strategy was used for solid-state exfoliation of graphite fluoride in a few seconds, followed by a simple yet efficient separation to obtain exfoliated materials based on the density difference between graphite and graphene fluoride in solvent. The microwave-exfoliated graphene fluoride was a few layers thick and electrically conductive. The electrochemical testing of pouch-cell supercapacitors assembled by using the exfoliated graphene fluoride electrodes and a novel microemulsion-based electrolyte showed reasonable performance with typical electrical double-layer capacitance behavior and good rate capability (gravimetric specific capacitance: 3.2 F g-1 at 500 mA g-1 and 3.1 F g-1 at 5000 mA g-1). The BET specific surface areas of the as-exfoliated graphene fluoride are ~60-80 m2 g-1, which could be increased by activation using this simple yet versatile microwave-based method for further improvements on the electrochemical performance.
RESUMO
PURPOSE: The use of dielectric pads to redistribute the radiofrequency fields is currently a popular solution for 7 T MRI practical applications, especially in brain imaging. In this work, we tackle several downsides of the previous generation of dielectric pads. This new silicon carbide recipe makes them MR invisible and greatly extends the performance lifespan. METHOD: We produce a set of two 10x10x1cm3 dielectric pads based on silicon carbide (SiC) powder dispersed in 4-Fluoro 1, 3-dioxalan-2-one (FEC) and polyethylene Glycol (PEG). The stability of the complex permittivity and the invisibility of the pads are characterized experimentally. Numerical simulations are done to evaluate global and local SAR over the head in presence of the pads. B0, B1+ and standard imaging sequences are performed on healthy volunteers. RESULTS: SiC pads are compared to state-of-the-art perovskite based dielectric pads with similar dielectric properties (barium titanate). Numerical simulations confirm that head and local SAR are similar. MRI measurements confirm that the pads do not induce susceptibility artefacts and improve B1+ amplitude in the temporal lobe regions by 25% on average. CONCLUSION: We demonstrate the long-term performance and invisibility of these new pads in order to increase the contrast in the brain temporal lobes in a commercial 7 T MRI head coil.
Assuntos
Artefatos , Imageamento por Ressonância Magnética , Encéfalo/diagnóstico por imagem , Compostos Inorgânicos de Carbono , Humanos , Imageamento por Ressonância Magnética/métodos , Imagens de Fantasmas , Ondas de Rádio , Compostos de SilícioRESUMO
This paper explores the quality and usefulness of ethical guidance for humanitarian aid workers and their agencies. We focus specifically on public health emergencies, such as COVID-19. The authors undertook a literature review and gathered empirical data through semi-structured focus group discussions amongst front-line workers from health clinics in Cox's Bazar, Bangladesh and in the Abyei Special Administrative Area, South Sudan. The purpose of the project was to identify how front-line workers respond to ethical challenges, including any informal or local decision-making processes, support networks, or habits of response.The research findings highlighted a dissonance between ethical guidance and the experiences of front-line humanitarian health workers. They suggest the possibility: (1) that few problems confronting front-line workers are conceived, described, or resolved as ethical problems; and (2) of significant dissonance between available, allegedly practically oriented guidance (often produced by academics in North America and Europe), and the immediate issues confronting front-line workers. The literature review and focus group data suggest a real possibility that there is, at best, a significant epistemic gulf between those who produce ethical guidelines and those engaged in real-time problem solving at the point of contact with people. At worst they suggest a form of epistemic control-an imposition of cognitive shapes that shoehorn the round peg of theoretical preoccupations and the disciplinary boundaries of western academies into the square hole of front-line humanitarian practice.
Assuntos
Altruísmo , COVID-19 , Pessoal de Saúde , Humanos , Princípios Morais , Saúde PúblicaRESUMO
Over a decade ago, it was confirmed that detonation nanodiamond (DND) powders reflect very cold neutrons (VCNs) diffusively at any incidence angle and that they reflect cold neutrons quasi-specularly at small incidence angles. In the present publication, we report the results of a study on the effect of particle sizes on the overall efficiency of neutron reflectors made of DNDs. To perform this study, we separated, by centrifugation, the fraction of finer DND nanoparticles (which are referred to as S-DNDs here) from a broad initial size distribution and experimentally and theoretically compared the performance of such a neutron reflector with that from deagglomerated fluorinated DNDs (DF-DNDs). Typical commercially available DNDs with the size of ~4.3 nm are close to the optimum for VCNs with a typical velocity of ~50 m/s, while smaller and larger DNDs are more efficient for faster and slower VCN velocities, respectively. Simulations show that, for a realistic reflector geometry, the replacement of DF-DNDs (a reflector with the best achieved performance) by S-DNDs (with smaller size DNDs) increases the neutron albedo in the velocity range above ~60 m/s. This increase in the albedo results in an increase in the density of faster VCNs in such a reflector cavity of up to ~25% as well as an increase in the upper boundary of the velocities of efficient VCN reflection.
RESUMO
Neutrons can be an instrument or an object in many fields of research. Major efforts all over the world are devoted to improving the intensity of neutron sources and the efficiency of neutron delivery for experimental installations. In this context, neutron reflectors play a key role because they allow significant improvement of both economy and efficiency. For slow neutrons, Detonation NanoDiamond (DND) powders provide exceptionally good reflecting performance due to the combination of enhanced coherent scattering and low neutron absorption. The enhancement is at maximum when the nanoparticle diameter is close to the neutron wavelength. Therefore, the mean nanoparticle diameter and the diameter distribution are important. In addition, DNDs show clustering, which increases their effective diameters. Here, we report on how breaking agglomerates affects clustering of DNDs and the overall reflector performance. We characterize DNDs using small-angle neutron scattering, X-ray diffraction, scanning and transmission electron microscopy, neutron activation analysis, dynamical light scattering, infra-red light spectroscopy, and others. Based on the results of these tests, we discuss the calculated size distribution of DNDs, the absolute cross-section of neutron scattering, the neutron albedo, and the neutron intensity gain for neutron traps with DND walls.
RESUMO
The benefit of enriching solid-electrolyte interface with fluorine atoms through the use of fluorinated additives into the electrolyte composition has recently gained popularity for anode materials used in secondary lithium-ion batteries. Another strategy is to provide these fluorine atoms via surface fluorination of the electrode material, particularly for multiwalled carbon nanotube (MWCNT)/SnO2-based composites where fluorination must act selectively on SnO2. Our study presents two methods of surface fluorination applied on MWCNT/SnO2, one using F2(g) and the other XeF2(s). These fluorinating agents are known for their different particle penetration depths. An ultrathin and very dense fluorinated layer achieved by the action of F2(g) allows to form a very stable interface leading to gravimetric capacities of 789 mA h g-1 after 50 cycles. A thin and porous fluorinated layer made by the action of XeF2(s) favors the formation of a new Sn-based fluorinated phase, never reported in the literature, which also stabilizes capacities over 50 cycles. In any case, the value of adding fluorine atoms to the surface of the electrode material to improve cycle stability is demonstrated.