Preparation and Characterization of Zinc(II)-Based Lewis/Brønsted Acidic Deep Eutectic Solvents.

Lewis/Brønsted acidic deep eutectic solvents (LBDESs) are a recent class of solvents that combine the two types of acidity. In some cases, this synergy leads to enhanced catalytic properties for many reactions and applications. For this reason, it is important to discover more LBDESs. In this work, we prepared and characterized four different zinc(II)-based LBDESs, mixing ZnCl2 and various Brønsted acids: acetic, glycolic, levulinic, and formic acids. Apart from the latter, for which the corresponding DES is not thermally stable, the samples have been characterized in terms of density, viscosity, and conductivity. Notably, as zinc(II) is a diamagnetic metal, all of them are suitable for NMR spectroscopy, for example, for kinetic and mechanistic studies.

Hexavalent chromium release over time from a pyrolyzed Cr-bearing tannery sludge.

Pyrolysis in an inert atmosphere is a widely applied route to convert tannery wastes into reusable materials. In the present study, the Cr(III) conversion into the toxic hexavalent form in the pyrolyzed tannery waste referred to as KEU was investigated. Ageing experiments and leaching tests demonstrated that the Cr(III)-Cr(VI) inter-conversion occurs in the presence of air at ambient temperature, enhanced by wet environmental conditions. Microstructural analysis revealed that the Cr-primary mineral assemblage formed during pyrolysis (Cr-bearing srebrodolskite and Cr-magnetite spinel) destabilized upon spray water cooling in the last stage of the process. In the evolution from the higher to the lower temperature mineralogy, Cr is incorporated into newly formed CrOOH flakes which likely react in air forming extractable Cr(VI) species. This property transforms KEU from an inert waste to a hazardous material when exposed to ordinary ambient conditions.

A Thermal Analytical Study of LEGO® Bricks for Investigating Light-Stability of ABS.

Acrylonitrile butadiene styrene (ABS) is a thermoplastic polymer widely used in several everyday life applications; moreover, it is also one of the most employed plastics in contemporary artworks and design objects. In this study, the chemical and thermal properties of an ABS-based polymer and its photo-degradation process were investigated through a multi-analytical approach based on thermal, mass spectrometric and spectroscopic techniques. LEGO® building blocks were selected for studying the ABS properties. First, the composition of unaged LEGO® bricks was determined in terms of polymer composition and thermal stability; then, the bricks were subjected to UV-Vis photo-oxidative-accelerated ageing for evaluation of possible degradation processes. The modifications of the chemical and thermal properties were monitored in time by a multi-technique approach aimed at improving the current knowledge of ABS photodegradation, employing pyrolysis online with gas chromatography and evolved gas analysis, coupled with mass spectrometric detection (Py-GC-MS and EGA-MS), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and corroborated by external reflection FT-IR spectroscopy. The multimodal approach provided new evidence on the two-step degradation pathway proposed for ABS, defining molecular markers for polybutadiene oxidation and styrene-acrylonitrile depolymerization. Moreover, the results highlighted the feasibility of correlating accurate compositional and thermal data acquired by bulk techniques with external reflection FT-IR spectroscopy as a non-invasive portable tool to monitor the state of conservation of plastic museum objects in-situ.

A versatile method to fingerprint and compare the oxidative behaviour of lipids beyond their oxidative stability.

In this work we propose the use of isothermal thermogravimetry to evaluate the oxidative stability of a lipid and to evaluate how the glyceride composition affects the entire oxidative process, to quantify the oxidation undertaken by the lipid, and numerically compare the oxidative behaviour of different lipids. The innovative aspect of the present method lies in the acquisition of a prolonged "oxygen uptake" curve (4000-10,000 min) of a lipid under oxygen and in the development of a semi-empirical fitting equation for the experimental data. This provides the induction period (oxidative stability), and allows to evaluate the rate of oxidation, the rate and the magnitude of oxidative degradation, the overall mass loss and the mass of oxygen taken by the lipid upon time. The proposed approach is used to characterize the oxidation of different edible oils with different degrees of unsaturation (linseed oil, sunflower oil, and olive oil) as well as chemically simpler compounds used in the literature to model the autoxidation of vegetable oils and lipids in general: triglycerides (glyceryl trilinolenate, glyceryl trilinoleate and glyceryl trioleate) and methyl esters (methyl linoleate and methyl linolenate). The approach proves very robust and very sensitive to changes in the sample composition.

A holistic view on the role of egg yolk in Old Masters' oil paints.

Old Masters like Botticelli used paints containing mixtures of oils and proteins, but "how" and "why" this was done is still not understood. Here, egg yolk is used in combination with two pigments to evaluate how different repartition of proteinaceous binder can be used to control the flow behavior as well as drying kinetics and chemistry of oil paints. Stiff paints enabling pronounced impasto can be achieved, but paint stiffening due to undesired uptake of humidity from the environment can also be suppressed, depending on proteinaceous binder distribution and colloidal paint microstructure. Brushability at high pigment loading is improved via reduction of high shear viscosity and wrinkling can be suppressed adjusting a high yield stress. Egg acts as antioxidant, slowing down the onset of curing, and promoting the formation of cross-linked networks less prone to oxidative degradation compared to oil alone, which might improve the preservation of invaluable artworks.

One-Pot Process: Microwave-Assisted Keratin Extraction and Direct Electrospinning to Obtain Keratin-Based Bioplastic.

Poultry feathers are among the most abundant and polluting keratin-rich waste biomasses. In this work, we developed a one-pot microwave-assisted process for eco-friendly keratin extraction from poultry feathers followed by a direct electrospinning (ES) of the raw extract, without further purification, to obtain keratin-based bioplastics. This microwave-assisted keratin extraction (MAE) was conducted in acetic acid 70% v/v. The effects of extraction time, solvent/feathers ratio, and heating mode (MAE vs. conventional heating) on the extraction yield were investigated. The highest keratin yield (26 ± 1% w/w with respect to initial feathers) was obtained after 5 h of MAE. Waste-derived keratin were blended with gelatin to fabricate keratin-based biodegradable and biocompatible bioplastics via ES, using 3-(Glycidyloxypropyl)trimethoxysilane (GPTMS) as a cross-linking agent. A full characterization of their thermal, mechanical, and barrier properties was performed by differential scanning calorimetry, thermogravimetric analysis, uniaxial tensile tests, and water permeability measurements. Their morphology and protein structure were investigated using scanning electron microscopy and attenuated total reflection-infrared spectroscopy. All these characterizations highlighted that the properties of the keratin-based bioplastics can be modulated by changing keratin and GPTMS concentrations. These bioplastics could be applied in areas such as bio-packaging and filtration/purification membranes.

The stability of paintings and the molecular structure of the oil paint polymeric network.

A molecular-level understanding of the structure of the polymeric network formed upon the curing of air-drying artists' oil paints still represents a challenge. In this study we used a set of analytical methodologies classically employed for the characterisation of a paint film-based on infrared spectroscopy and mass spectrometry-in combination with solid state NMR (SSNMR), to characterise model paint layers which present different behaviours towards surface cleaning with water, a commonly applied procedure in art conservation. The study demonstrates, with the fundamental contribution of SSNMR, a relationship between the painting stability and the chemical structure of the polymeric network. In particular, it is demonstrated for the first time that a low degree of cross-linking in combination with a high degree of oxidation of the polymeric network render the oil paint layer sensitive to water.

Pectin as Rheology Modifier of a Gelatin-Based Biomaterial Ink.

Gelatin is a natural biopolymer extensively used for tissue engineering applications due to its similarities to the native extracellular matrix. However, the rheological properties of gelatin formulations are not ideal for extrusion-based bioprinting. In this work, we present an approach to improve gelatin bioprinting performances by using pectin as a rheology modifier of gelatin and (3-glycidyloxypropyl)trimethoxysilane (GPTMS) as a gelatin-pectin crosslinking agent. The preparation of gelatin-pectin formulations is initially optimized to obtain homogenous gelatin-pectin gels. Since the use of GPTMS requires a drying step to induce the completion of the crosslinking reaction, microporous gelatin-pectin-GPTMS sponges are produced through freeze-drying, and the intrinsic properties of gelatin-pectin-GPTMS networks (e.g., porosity, pore size, degree of swelling, compressive modulus, and cell adhesion) are investigated. Subsequently, rheological investigations together with bioprinting assessments demonstrate the key role of pectin in increasing the viscosity and the yield stress of low viscous gelatin solutions. Water stable, three-dimensional, and self-supporting gelatin-pectin-GPTMS scaffolds with interconnected micro- and macroporosity are successfully obtained by combining extrusion-based bioprinting and freeze-drying. The proposed biofabrication approach does not require any additional temperature controller to further modulate the rheological properties of gelatin solutions and it could furthermore be extended to improve the bioprintability of other biopolymers.

Thermodynamic Evaluation of the Interactions between Anticancer Pt(II) Complexes and Model Proteins.

In this work, we have analysed the binding of the Pt(II) complexes ([PtCl(4'-phenyl-2,2':6',2″-terpyridine)](CF3SO3) (1), [PtI(4'-phenyl-2,2':6',2″-terpyridine)](CF3SO3) (2) and [PtCl(1,3-di(2-pyridyl)benzene) (3)] with selected model proteins (hen egg-white lysozyme, HEWL, and ribonuclease A, RNase A). Platinum coordination compounds are intensively studied to develop improved anticancer agents. In this regard, a critical issue is the possible role of Pt-protein interactions in their mechanisms of action. Multiple techniques such as differential scanning calorimetry (DSC), electrospray ionization mass spectrometry (ESI-MS) and UV-Vis absorbance titrations were used to enlighten the details of the binding to the different biosubstrates. On the one hand, it may be concluded that the affinity of 3 for the proteins is low. On the other hand, 1 and 2 strongly bind them, but with major binding mode differences when switching from HEWL to RNase A. Both 1 and 2 bind to HEWL with a non-specific (DSC) and non-covalent (ESI-MS) binding mode, dominated by a 1:1 binding stoichiometry (UV-Vis). ESI-MS data indicate a protein-driven chloride loss that does not convert into a covalent bond, likely due to the unfavourable complexes' geometries and steric hindrance. This result, together with the significant changes of the absorbance profiles of the complex upon interaction, suggest an electrostatic binding mode supported by some stacking interaction of the aromatic ligand. Very differently, in the case of RNase A, slow formation of covalent adducts occurs (DSC, ESI-MS). The reactivity is higher for the iodo-compound 2, in agreement with iodine lability higher than chlorine.

Effect of Polymer Hydrophilicity and Molar Mass on the Properties of the Protein in Protein-Polymer Conjugates: The Case of PPEylated Myoglobin.

Polyphosphoesters (PPEs), a versatile class of biodegradable and biocompatible polymers, have been proposed as alternatives to poly(ethylene glycol) (PEG), which is suspected to be responsible for anaphylactic reactions in some patients after the administration of PEGylated compounds, e.g., in the current Covid-19 vaccines. We present the synthesis and characterization of a novel set of protein-polymer conjugates using the model protein myoglobin and a set of PPEs with different hydrophilicity and molar mass. We report an extensive evaluation of the (bio)physical properties of the protein within the conjugates, studying its conformation, residual activity, and thermal stability by complementary techniques (UV-vis spectroscopy, nano-differential scanning calorimetry, and fluorometry). The data underline the systematic influence of polymer hydrophilicity on protein properties. The more hydrophobic polymers destabilize the protein, the more hydrophilic PPEs protect against thermally induced aggregation and proteolytic degradation. This basic study aims at guiding the design of future PPEylated drugs and protein conjugates.

Conservation Issues of Modern Oil Paintings: A Molecular Model on Paint Curing.

The 20th and 21st century oil paintings are presenting a range of challenging conservation problems that can be distinctly different from those noted in paintings from previous centuries. These include the formation of vulnerable surface "skins" of medium and exudates on paint surfaces, efflorescence, unpredictable water and solvent sensitivity, and incidence of paint dripping which can occur within a few years after the paintings were completed. Physicochemical studies of modern oil paints and paintings in recent years have identified a range of possible causal factors for the noted sensitivity of painting surfaces to water and protic solvents, including the formation of water-soluble inorganic salts and/or the accumulation of diacids at the paint surface, which are oxidation products of the oil binder. Other studies have investigated the relationship between water sensitivity and the degree of hydrolysis of the binder, the proportions of free fatty and dicarboxylic acids formed, as well as the relative content of free metal soaps. Thus far, data indicate that the qualitative and quantitative composition of the nonpolymerized fractions of the oil binder cannot be solely or directly related to the solvent sensitivity of the paint film. Conclusions therefore indicate that the polymeric network, formed upon the curing of the oil, plays a fundamental role, suggesting that water sensitivity, at least in some cases, may be related to the poor development and/or polar nature of the formed polymeric network rather than the composition of the nonpolymerized fractions. Poorly developed polymeric networks, in combination with the migration of polar fractions, i.e., dicarboxylic and hydroxylated fatty acids toward the paint surface, can be related to other degradation phenomena, including the separation and migration of the paint binder which can lead to the presence of observable skins of medium as well as the more alarming phenomenon of liquefying or dripping oil paints. It is thus crucial to understand the molecular composition of these paints and their physicochemical behavior to aid the further development of appropriate conservation and preservation strategies, as the risks currently associated with surface cleaning treatments and other conservation procedures can be unacceptably high. This Account reviews the relationships between the degradation phenomena associated with modern oil paintings and the chemical composition of the oil binder and proposes a molecular model for the development of water sensitivity and other noted degradation phenomena. It is suggested that water sensitivity (and possibly other degradation phenomena) is a consequence of processes that take place upon curing, and in particular to the rate of formation and decomposition of alkoxyl and peroxyl radicals. These reactions are strongly dependent on the type of oil present, the ambient environmental conditions, and the chemical and physical nature of the pigments and additives present in the paint formulation. When the curing environment is oxidizing, the chemistry of peroxyl radicals dominates the reaction pathways, and oxidative decomposition of the paint film overwhelms cross-linking reactions.

Structural and Thermoanalytical Characterization of 3D Porous PDMS Foam Materials: The Effect of Impurities Derived from a Sugar Templating Process.

Polydimethylsiloxane (PDMS) polymers are extensively used in a wide range of research and industrial fields, due to their highly versatile chemical, physical, and biological properties. Besides the different two-dimensional PDMS formulations available, three-dimensional PDMS foams have attracted increased attention. However, as-prepared PDMS foams contain residual unreacted low molecular weight species that need to be removed in order to obtain a standard and chemically stable material for use as a scaffold for different decorating agents. We propose a cleaning procedure for PDMS foams obtained using a sugar templating process, based on the use of two different solvents (hexane and ethanol) as cleaning agents. Thermogravimetry coupled with Fourier Transform Infrared Spectroscopy (TG-FTIR) for the analysis of the evolved gasses was used to characterize the thermal stability and decomposition pathway of the PDMS foams, before and after the cleaning procedure. The results were compared with those obtained on non-porous PDMS bulk as a reference. Micro-CT microtomography and scanning electron microscopy (SEM) analyses were employed to study the morphology of the PDMS foam. The thermogravimetric analysis (TGA) revealed a different thermal behaviour and crosslinking pathway between bulk PDMS and porous PDMS foam, which was also influenced by the washing process. This information was not apparent from spectroscopic or morphological studies and it would be very useful for planning the use of such complex and very reactive systems.

Loading of halloysite nanotubes with BSA, α-Lac and ß-Lg: a Fourier transform infrared spectroscopic and thermogravimetric study.

Halloysite nanotubes (HNTs) are considered as ideal materials for biotechnological and medical applications. An important feature of halloysite is that it has a different surface chemistry on the inner and outer sides of the tubes. This property means that negatively-charged molecules can be selectively loaded inside the halloysite nanoscale its lumen. Loaded HNTs can be used for the controlled or sustained release of proteins, drugs, bioactive molecules and other agents. We studied the interaction between HNTs and bovine serum albumin, α lactalbumin and ß -lactoglobulin loaded into HTNs using Fourier transform infrared spectroscopy and thermogravimetry. These techniques enabled us to study the protein conformation and thermal stability, respectively, and to estimate the amount of protein loaded into the HNTs. TEM images confirmed the loading of proteins into HTNs.

Insights into structural and dynamical features of water at halloysite interfaces probed by DFT and classical molecular dynamics simulations.

Density functional theory calculations and classical molecular dynamics simulations have been used to investigate the structure and dynamics of water molecules on kaolinite surfaces and confined in the interlayer of a halloysite model of nanometric dimension. The first technique allowed us to accurately describe the structure of the tetrahedral-octahedral slab of kaolinite in vacuum and in interaction with water molecules and to assess the performance of two widely employed empirical force fields to model water/clay interfaces. Classical molecular dynamics simulations were used to study the hydrogen bond network structure and dynamics of water adsorbed on kaolinite surfaces and confined in the halloysite interlayer. The results are in nice agreement with the few experimental data available in the literature, showing a pronounced ordering and reduced mobility of water molecules at the hydrophilic octahedral surfaces of kaolinite and confined in the halloysite interlayer, with respect to water interacting with the hydrophobic tetrahedral surfaces and in the bulk. Finally, this investigation provides new atomistic insights into the structural and dynamical properties of water-clay interfaces, which are of fundamental importance for both natural processes and industrial applications.

FTIR study of ageing of fast drying oil colour (FDOC) alkyd paint replicas.

We propose ATR-FTIR spectroscopy for the characterization of the spectral changes in alkyd resin from the Griffin Alkyd Fast Drying Oil Colour range (Winsor & Newton), occurring over 550 days (∼18 months) of natural ageing and over six months of artificial ageing under an acetic acid atmosphere. Acetic acid is one of the atmospheric pollutants found inside museums in concentrations that can have a significant effect on the works exhibited. During natural ageing we observed an increase and broadening of the OH group band around 3300 cm(-1) and an increase in bands in the region 1730-1680 cm(-1) due to carbonyl stretching. We found a broad band around 1635 cm(-1) likely due to CO stretching vibrations of ß dichetons. These spectral changes are the result of autooxidation reactions during natural ageing and crosslinking, which then form f alcohols and carbonyl species. The increase in absorbance at 1635 cm(-1) was selected as a parameter to monitor the ageing process of paintings prepared with FDOC, without the need for any extractive procedure. FTIR spectra of paint replicas kept under an acetic acid atmosphere indicated the chemical groups involved in the reaction with acid, thus suggesting which spectral FTIR regions could be investigated in order to follow any degradation in real paintings. A red paint sample from a hyper-realistic artwork ("Racconta storie", 2003) by the Italian painter Patrizia Zara was investigated by FTIR in order to evaluate the effects of 10 years natural ageing on alkyd colours. The results obtained suggested that after the end of chemical drying (autooxidation), alkyd colours are very stable.

Interactions between inorganic pigments and proteinaceous binders in reference paint reconstructions.

The degradation of the proteinaceous binders, ovalbumin (OVA) and casein, and their interactions with azurite (Cu(3)(CO(3))(2)(OH)(2)), calcium carbonate (CaCO(3)), hematite (Fe(2)O(3)) and red lead (Pb(3)O(4)) pigments were studied. A multi-analytical approach based on Thermogravimetric Analysis (TG), Differential Scanning Calorimetry (DSC), Fourier Transform Infrared Spectroscopy (FTIR) and Size Exclusion Chromatography (SEC) was used. The research was carried out on a set of paint reconstructions, which were analysed before and after artificial light ageing. We highlighted that in most cases the inorganic pigments interact with both proteins by decreasing their thermal stability and their intermolecular ß-sheet content, and that ageing induces aggregation. We hypothesized that pigments intercalate between protein molecules, producing a partial disruption to the protein-protein intermolecular interaction. In the case of casein, these phenomena continued during ageing. In fact, we observed a complete disappearance of intermolecular ß-sheets and an increase in intramolecular ß-sheets and random coil during ageing. This result is in agreement with the structural properties of casein, whose aggregation is known to be induced by hydrophobic interactions. On the other hand, in aged OVA paint replicas, we observed the formation of new intermolecular ß-sheets and an increase in thermostability. In addition FTIR showed oxidation of the side chains of the aged OVA/hematite sample and aged casein pigment samples, and SEC highlighted hydrolysis phenomena in aged carbonate, azurite and red lead/OVA complexes and in aged casein/calcium carbonate and casein/azurite samples.

New insights into the ageing of linseed oil paint binder: a qualitative and quantitative analytical study.

This paper presents an analytical investigation of paint reconstructions prepared with linseed oil that have undergone typical 19th century treatments in preparation for painting. The oil was mechanically extracted from the same seed lot, which was then processed by various methods: water washing, heat treatments, and the addition of driers, with and without heat. A modern process lead white (Dutch source, Schoonhoven) and a commercially available vine black were used as pigments. The reconstructions were prepared in 1999, and naturally aged from then onwards. We compared thermogravimetric analysis (TG), which yields macromolecular information, with gas chromatography-mass spectrometry (GC-MS) and direct exposure mass spectrometry (DEMS), which both provide molecular information. The study enabled us to quantitatively demonstrate, for the first time, that the parameters used to identify drying oils are deeply influenced by the history of the paint. In particular, here we show that the ratio between the relative amounts of palmitic and stearic acid (P/S), which is used as an index for differentiating between drying oils, is extremely dependent on the pigments present and the age of the paint. Moreover the study revealed that neither the P/S parameter nor the ratios between the relative amounts of the various dicarboxylic acids (azelaic over suberic and azelaic over sebacic) can be used to trace the sorts of pre-treatment undergone by the oil investigated in this study. The final results represent an important milestone for the scientific community working in the field, highlighting that further research is still necessary to solve the identification of drying oils in works of art.

Physico-chemical characterization of protein-pigment interactions in tempera paint reconstructions: casein/cinnabar and albumin/cinnabar.

In this work, we characterized paint reconstructions using ovalbumin and casein as binders, and cinnabar (HgS) as a pigment, before and after artificial ageing. Egg and casein are common paint binders that were used historically in the technique of tempera painting. Despite extensive research on the identification of proteinaceous binders in paintings, there is a substantial lack of knowledge regarding the ageing pathway of their protein content, and their chemical interaction with inorganic pigments. Thermogravimetric analysis, infrared spectroscopy and size-exclusion chromatography (SEC) were used to reveal the physico-chemical processes involved in the ageing of proteins in paintings. Taken together, the three techniques highlighted that proteins are subject to both cross-linking and hydrolysis upon ageing, and to a lesser extent, to oxidation of the side chains. Mercury-protein interactions were also revealed using a cold vapour generation atomic fluorescence spectrometer mercury-specific detector coupled to SEC. The study clearly showed that HgS forms stable complexes with proteins and acts as a sensitizer in cross-linking, hydrolysis and oxidation.

QSPR Analysis of Copolymers by Recursive Neural Networks: Prediction of the Glass Transition Temperature of (Meth)acrylic Random Copolymers.

The glass transition temperature (Tg ) of acrylic and methacrylic random copolymers was investigated by means of Quantitative Structure-Property Relationship (QSPR) methodology based on Recursive Neural Networks (RNN). This method can directly take molecular structures as input, in the form of labelled trees, without needing predefined descriptors. It was applied to three data sets containing up to 615 polymers (340 homopolymers and 275 copolymers). The adopted representation was able to account for the structure of the repeating unit as well as average macromolecular characteristics, such as stereoregularity and molar composition. The best result, obtained on a data set focused on copolymers, showed a Mean Average Residual (MAR) of 4.9 K, a standard error of prediction (S) of 6.1 K and a squared correlation coefficient (R(2) ) of 0.98 for the test set, with an optimal rate with respect to the training error. Through the treatment of homopolymers and copolymers both as separated and merged data sets, we also showed that the proposed approach is particularly suited for generalizing prediction of polymer properties to various types of chemical structures in a uniform setting.

Evaluation of hierarchical structured representations for QSPR studies of small molecules and polymers by recursive neural networks.

This paper reports some recent results from the empirical evaluation of different types of structured molecular representations used in QSPR analysis through a recursive neural network (RNN) model, which allows for their direct use without the need for measuring or computing molecular descriptors. This RNN methodology has been applied to the prediction of the properties of small molecules and polymers. In particular, three different descriptions of cyclic moieties, namely group, template and cyclebreak have been proposed. The effectiveness of the proposed method in dealing with different representations of chemical structures, either specifically designed or of more general use, has been demonstrated by its application to data sets encompassing various types of cyclic structures. For each class of experiments a test set with data that were not used for the development of the model was used for validation, and the comparisons have been based on the test results. The reported results highlight the flexibility of the RNN in directly treating different classes of structured input data without using input descriptors.