Multi-element analysis of unfiltered samples in river water monitoring-digestion and single-run analyses of 67 elements.

Routine analysis of inorganic analytes in whole water samples from rivers (unfiltered river water) is rarely reported in scientific publications. However, this sample type is valuable and often used in long-term monitoring, regulation, and catchment element budgets, as it includes the dissolved, colloidal, and particulate fraction in one sample type. Preservation measures are not needed and solid-liquid partitioning can be disregarded, which simplifies automated sampling and storage procedures. In this study, we provide several digestion protocols for whole water samples from rivers and the subsequent multi-element analysis of 67 major, minor, and trace elements: Li, Be, B, Na, Mg, Al, Si, P, S, K, Ca, Sc, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Ga, Ge, As, Se, Br, Rb, Sr, Y, Zr, Nb, Mo, Ru, Ag, Cd, In, Sn, Sb, Te, Cs, Ba, La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb, Lu, Hf, Ta, W, Ir, Pt, Au, Hg, Tl, Pb, Bi, Th, U. In the absence of whole water reference materials for inorganic analytes, we introduce simulated whole water samples by suspending sediment reference materials as quality control measures. The applicability for improved routine water quality monitoring was successfully tested on samples from different rivers revealing variations of the element fingerprints over time.

Efficiency of five samplers to trap suspended particulate matter and microplastic particles of different sizes.

Suspended particulate matter (SPM) plays a major role in nutrient cycles and for the transport of pollutants within local and transboundary water catchments. Obtaining representative SPM samples from rivers, lakes, inland and coastal waters is crucial for quantitative and qualitative chemical analyses to correctly describe the chemical status of a water body. However, a representative sampling of SPM over time is challenging due to the heterogeneity of SPM particles sizes, their non-uniform distribution in rivers, and a variety of sampling devices being in use. Therefore, we investigated the efficiencies of five different sampling devices commonly used in national and international monitoring programs to collect representative SPM samples. We tested three passive sedimentation-based samplers (SBSs: sedimentation box, SB; sedimentation tank, ST; Raetz Sampler, RS), and two active separation techniques (continuous flow centrifuge, CFC; vacuum filtration, VF) in an experimental laboratory setup using in-house SPM standard suspensions (mineral, organic, and microplastic particles) with defined particle sizes. The mass-based efficiencies of the three examined SBSs were 0-66% for the mineral and organic particles <75 µm, where the mean particle sizes of collected samples were always shifted to bigger sizes compared to the initial suspensions. The efficiencies of the three SBSs to collect microplastic particles <80 µm were <20% due to the lower densities of microplastic compared to organic and mineral particles. In contrast to the SBSs, VF and CFC units showed excellent efficiencies >86% for all tested materials, with similar particle size distributions of the sampled material compared to those of the inlet suspensions. In conclusion, SPM sampling efficiencies of sampling units have to be carefully considered and compared to the respective aims of the monitoring approaches, especially when statements are derived from quantitative results on SPM.

Quantification of 68 elements in river water monitoring samples in single-run measurements.

Triple-quadrupole inductively coupled plasma mass spectrometry (ICP-QQQ-MS) is a unique analytical technique which is, next to speciation analyses, applied for the determination of total element concentrations in several matrices. Due to its wide linear range, short analysis times, and the collision-reaction gas technology, it is capable of addressing a high number of analytes in a single run with sufficient low limits of quantification for river water monitoring. Over the last decades, the focus of the environmental monitoring changed from "traditional" and regulated analytes to elements of possibly rising concern from new applications such as the so-called technology-critical elements (TCE). By widening the analytical window of this method for applications in networks of future river water monitoring, a better understanding of natural transport processes and global biogeochemical element cycles will be established and the total number of methods can be reduced. During method development and validation, certified reference materials, calibration check solutions, and spiked river water samples from 12 major German rivers covering different catchment areas were measured and evaluated with the three cell gases He, H2 and O2. The method delivers a best as possible undisturbed simultaneous determination for 68 out of 71 target analytes with recoveries in an accepted range of 80-120% for river water samples (dissolved fraction; <0.45 µm). After comprehensive evaluation, we offer a novel best-practice multi-element method for river water monitoring with the goal of fostering the exchange and discussion between practitioners in long-term river monitoring. It enables the readers to create their own methods based on the scientific needs to monitor elemental "fingerprints" of rivers and their catchments.

Making waves: Time for chemical surface water quality monitoring to catch up with its technical potential.

A comprehensive real-time evaluation of the chemical status of surface water bodies is still utopian, but in our opinion, it is time to use the momentum delivered by recent advanced technical, infrastructural, and societal developments to get significantly closer. Procedures like inline and online analysis (in situ or in a bypass) with close to real-time analysis and data provision are already available in several industrial sectors. In contrast, atline and offline analysis involving manual sampling and time-decoupled analysis in the laboratory is still common practice in aqueous environmental monitoring. Automated tools for data analysis, verification, and evaluation are changing significantly, becoming more powerful with increasing degrees of automation and the introduction of self-learning systems. In addition, the amount of available data will most likely in near future be increased by societal awareness for water quality and by citizen science. In this analysis, we highlight the significant potential of surface water monitoring techniques, showcase "lighthouse" projects from different sectors, and pin-point gaps we must overcome to strike a path to the future of chemical monitoring of inland surface waters.

Municipal waste incineration fly ashes: from a multi-element approach to market potential evaluation.

BACKGROUND: Fly ashes from municipal solid waste incineration contain significant amounts of (technology critical) elements. Processes to recover Cu or Zn are already in practice, but it still remains difficult to evaluate the full secondary resource potential of the ashes. One reason is the absence of a worldwide comparable analytical basis for detailed market analyses. To encounter this, (i) an advice on how to analyse 65 elements after microwave-assisted digestion by ICP-OES and ICP-MS is delivered, (ii) the heterogeneity (hours to annual cycle) is evaluated for a incineration plant, (iii) leaching efficiency with three different eluents and (iv) the market potential of the elements as commodities are evaluated. RESULTS AND CONCLUSIONS: Aqua regia digestion was found to be sufficient to evaluated the recovery potential; except for the mass constituents Al, Si, Sn, Ti and the trace components Cr, Hf, Nb, U and W, for which HF-containing digestions delivered better recoveries. On different time scales, ashes were very homogenous and HCl- as well as H2SO4-supported leaching delivered, satisfying results within an hour (exceptions are, e.g., Bi and Sb). By applying characterisation factors of the life cycle assessment impact category "Resource depletion-minerals and metals" supplemented by the list of critical raw materials of the EU: Ag, Bi, Cd, Ga, In and Sb are most interesting elements to be recovered in future activities.

Sediment water (interface) mobility of metal(loid)s and nutrients under undisturbed conditions and during resuspension.

The contribution of the release from sediments to the overall river Trave budget was evaluated with respect to 16 metal(loid)s, three non-metals and the ions PO43- and NH4+. To consider undisturbed conditions and sediment resuspension in-situ dialyses-based and ex-situ suction-based pore water sampling was complemented by sequential extraction and suspension reactor experiments. In the investigated sediments, representative for the study area, metal(loid) partitioning between the different geochemical fractions was very similar despite some higher contaminated spots. Pore water investigations emphasis that profiling and peeper based analyses are comparable and deliver an indication that sediment dwelling organisms are exposed to elevated metal(loid) concentrations. However, higher toxicity of the contaminated sediments compared to the sediment treated as background reference was not revealed. During resuspension only few metal(loid)s exceeded specified guideline values. The maximum amounts released, were only between 10-5 and 10-1% of the average daily load of the river Trave per ton of suspended sediment. Overall the "most pristine sediments" and not the potentially hazardous materials in the study area are found to be from highest concern. The results support requests to better include fractionation and speciation demands in legal assessments of sediments.

Impact of mechanical disturbance and acidification on the metal(loid) and C, P, S mobility at the sediment water interface examined using a fractionation meso profiling ICP-QQQ-MS approach.

The impact of mechanical disturbance and oxygen induced acidification on the concentration and size fractionation of the 12 metal(loid)s As, Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb, Sb, Tl, V and the polyatomic nonmetals C, P and S in the pore water was studied. Using the meso profiling and sampling system (messy) 12 pore water depth profiles were sampled from two incubation experiments undertaken in parallel, which were both mechanically disturbed in the lab and subsequently exposed to a different air supply. In parallel to the low invasive, automated sampling process the redox potential, the pH value and the O2 concentration were detected. Simultaneous quantification of all analytes by inductively coupled plasma-triple quad-mass spectrometry in the two different size classes dissolved (<0.45 µm) and colloidal (0.45-16 µm) showed: i) the predominant influence of the pH on the mobility of metals; ii) the mobility of metalloids was strongly impacted by the mechanical disturbance; and iii) the colloidal release is less important except for Fe, P, and Ni.

Metal(loid) speciation and size fractionation in sediment pore water depth profiles examined with a new meso profiling system.

In an exemplary incubation study with an anaerobic sediment sampled at an oxbow of the river Lahn in Germany (50°18'56.87″N; 7°37'41.25″E) and contaminated by former mining activity, a novel meso profiling and sampling system (messy) is presented. Messy enables a low invasive, automated sampling of pore water profiles across the sediment water interface (SWI), down to ∼20 cm depth with a spacial resolution of 1 cm. In parallel to the pore water sampling it measures physicochemical sediment parameters such as redox potential and pH value. In an incubation experiment of 151 days the ability of the setup was proven to address several different aspects relevant for fresh water and marine sediment studies: (i) The influence of mechanical disturbance and oxygen induced acidification on the mobility of 13 metals and metalloids (Cd, Co, Cu, Fe, Mn, Mo, Ni, Sb, U, V, Zn) was quantified based on 11 profiles. The analytes were quantified by inductively coupled plasma-mass spectrometry. Three groups of elements were identified with respect to the release into the pore water and the overlying water under different experimental conditions. (ii) The capability to investigate the impacts of changing physicochemical sediment properties on arsenic and antimony (III/V) speciation is shown. (iii) An approach to obtain information on size fractionation effects and to address the colloidal pore water fractions (0.45 µm-16 µm) was successfully conducted for the elements Ag, As, Cu, Fe and Mn.

A Framework to Evaluate the Impact of Armourstones on the Chemical Quality of Surface Water.

Today, basic requirements for construction works include the protection of human health and of the environment. In the tension area between economic demands, circular flow economy and environmental safety, a link between the results from standardized leaching tests and the respective environmental quality standards must be created. To derive maximum release limits of metals and metalloids for armourstones in hydraulic engineering, this link is accomplished via a simple model approach. By treating natural materials and industrial by-products the same way, the article delivers an overview on the recent regulative situation in Europe as well as describes and discusses an innovative approach to derive maximum release limits for monolithic construction products in hydraulic engineering on a conceptual level. On a practical level, a list of test parameters is derived by connecting an extensive dataset (seven armourstone materials with five repetitions and 31 elements tested with the worldwide applied dynamic surface leaching test) with surface water quality standards and predicted no effect concentrations. Finally, the leaching tests results are compared with the envisaged maximum release limits, offering a direct comparison between natural materials and industrial by-products.

Can cloud point-based enrichment, preservation, and detection methods help to bridge gaps in aquatic nanometrology?

Coacervate-based techniques are intensively used in environmental analytical chemistry to enrich and extract different kinds of analytes. Most methods focus on the total content or the speciation of inorganic and organic substances. Size fractionation is less commonly addressed. Within coacervate-based techniques, cloud point extraction (CPE) is characterized by a phase separation of non-ionic surfactants dispersed in an aqueous solution when the respective cloud point temperature is exceeded. In this context, the feature article raises the following question: May CPE in future studies serve as a key tool (i) to enrich and extract nanoparticles (NPs) from complex environmental matrices prior to analyses and (ii) to preserve the colloidal status of unstable environmental samples? With respect to engineered NPs, a significant gap between environmental concentrations and size- and element-specific analytical capabilities is still visible. CPE may support efforts to overcome this "concentration gap" via the analyte enrichment. In addition, most environmental colloidal systems are known to be unstable, dynamic, and sensitive to changes of the environmental conditions during sampling and sample preparation. This delivers a so far unsolved "sample preparation dilemma" in the analytical process. The authors are of the opinion that CPE-based methods have the potential to preserve the colloidal status of these instable samples. Focusing on NPs, this feature article aims to support the discussion on the creation of a convention called the "CPE extractable fraction" by connecting current knowledge on CPE mechanisms and on available applications, via the uncertainties visible and modeling approaches available, with potential future benefits from CPE protocols.

Metal and Metalloid Size-Fractionation Strategies in Spatial High-Resolution Sediment Pore Water Profiles.

Sediment water interfaces (SWIs) are often characterized by steep biogeochemical gradients determining the fate of inorganic and organic substances. Important transport processes at the SWI are sedimentation and resuspension of particulate matter and fluxes of dissolved materials. A microprofiling and micro sampling system (missy), enabling high resolution measurements of sediment parameters in parallel to a direct sampling of sediment pore waters (SPWs), was combined with two fractionation approaches (ultrafiltration (UF) and cloud point extraction (CPE)) to differentiate between colloidal and dissolved fractions at a millimeter scale. An inductively coupled plasma-quadrupole mass spectrometry method established for volumes of 300 µL enabled the combination of the high resolution fractionation with multi-element analyzes. UF and CPE comparably indicated that manganese is predominantly present in dissolved fractions of SPW profiles. Differences found for cobalt and iron showed that the results obtained by size-dependent UF and micelle-mediated CPE do not necessarily coincide, probably due to different fractionation mechanisms. Both methods were identified as suitable for investigating fraction-related element concentrations in SPW along sediment depth profiles at a millimeter scale. The two approaches are discussed with regard to their advantages, limitations, potential sources of errors, further improvements, and potential future applications.

Bioaccumulation in aquatic systems: methodological approaches, monitoring and assessment.

Bioaccumulation, the accumulation of a chemical in an organism relative to its level in the ambient medium, is of major environmental concern. Thus, monitoring chemical concentrations in biota are widely and increasingly used for assessing the chemical status of aquatic ecosystems. In this paper, various scientific and regulatory aspects of bioaccumulation in aquatic systems and the relevant critical issues are discussed. Monitoring chemical concentrations in biota can be used for compliance checking with regulatory directives, for identification of chemical sources or event-related environmental risk assessment. Assessing bioaccumulation in the field is challenging since many factors have to be considered that can affect the accumulation of a chemical in an organism. Passive sampling can complement biota monitoring since samplers with standardised partition properties can be used over a wide temporal and geographical range. Bioaccumulation is also assessed for regulation of chemicals of environmental concern whereby mainly data from laboratory studies on fish bioaccumulation are used. Field data can, however, provide additional important information for regulators. Strategies for bioaccumulation assessment still need to be harmonised for different regulations and groups of chemicals. To create awareness for critical issues and to mutually benefit from technical expertise and scientific findings, communication between risk assessment and monitoring communities needs to be improved. Scientists can support the establishment of new monitoring programs for bioaccumulation, e.g. in the frame of the amended European Environmental Quality Standard Directive.

Toward a comprehensive and realistic risk evaluation of engineered nanomaterials in the urban water system.

The European COoperation in Science and Technology (COST) Action ES1205 on the transfer of Engineered Nano materials from wastewater Treatment and stormwatEr to Rivers (ENTER) aims to create and to maintain a trans European network among scientists. This perspective article delivers a brief overview on the status quo at the beginning of the project by addressing the following aspects on engineered nano materials (ENMs) in the urban systems: (1) ENMs that need to be considered on a European level; (2) uncertainties on production-volume estimations; (3) fate of selected ENMs during waste water transport and treatment; (4) analytical strategies for ENM analysis; (5) ecotoxicity of ENMs, and (6) future needs. These six step stones deliver the derivation of the position of the ES1205 network at the beginning of the projects runtime, by defining six fundamental aspects that should be considered in future discussions on risk evaluation of ENMs in urban water systems.

New microprofiling and micro sampling system for water saturated environmental boundary layers.

The spatial high resolution of a microprofiling system was combined with the multi element capability of ICP-MS to enable a better understanding of element distributions and related processes across environmental boundary layers. A combination of a microprofiling system with a new micro filtration probe head connected to a pump and a fraction collector (microprofiling and micro sampling system, missy) is presented. This enables for the first time a direct, dynamic, and high resolution automatic sampling of small water volumes (<500 µL) from depth profiles of water saturated matrices (e.g., sediments, soils, biofilms). Different membrane cut-offs are available, and resolutions of a few (matrices with a high physical resistance) to a submillimeter scale (matrices with low physical resistance) can be achieved. In this Article, (i) the modular setups of two missys are presented; (ii) it is demonstrated how the micro probe heads are manufactured; (iii) background concentrations and recoveries of the system as well as (iv) exemplary results of a sediment water interface are delivered. On the basis of this, potentials, possible sources of errors, and future applications of the new missy are discussed.

ICP-MS-based characterization of inorganic nanoparticles--sample preparation and off-line fractionation strategies.

Validated and easily applicable analytical tools are required to develop and implement regulatory frameworks and an appropriate risk assessment for engineered nanoparticles (ENPs). Concerning metal-based ENPs, two main aspects are the quantification of the absolute mass concentration and of the "dissolved" fraction in, e.g., (eco)toxicity and environmental studies. To provide information on preparative aspects and on potential uncertainties, preferably simple off-line methods were compared to determine (1) the total concentration of suspensions of five metal-based ENP materials (Ag, TiO2, CeO2, ZnO, and Au; two sizes), and (2) six methods to quantify the "dissolved" fraction of an Ag ENP suspension. Focusing on inductively coupled plasma-mass spectrometry, the total concentration of the ENP suspensions was determined by direct measurement, after acidification and after microwave-assisted digestion. Except for Au 10 nm, the total concentrations determined by direct measurements were clearly lower than those measured after digestion (between 61.1 % for Au 200 nm and 93.7 % for ZnO). In general, acidified suspensions delivered better recoveries from 89.3 % (ZnO) to 99.3 % (Ag). For the quantification of dissolved fractions two filtration methods (ultrafiltration and tangential flow filtration), centrifugation and ion selective electrode were mainly appropriate with certain limitations, while dialysis and cloud point extraction cannot be recommended. With respect to precision, time consumption, applicability, as well as to economic demands, ultrafiltration in combination with microwave digestion was identified as best practice.

Biological surface coating and molting inhibition as mechanisms of TiO2 nanoparticle toxicity in Daphnia magna.

The production and use of nanoparticles (NP) has steadily increased within the last decade; however, knowledge about risks of NP to human health and ecosystems is still scarce. Common knowledge concerning NP effects on freshwater organisms is largely limited to standard short-term (≤48 h) toxicity tests, which lack both NP fate characterization and an understanding of the mechanisms underlying toxicity. Employing slightly longer exposure times (72 to 96 h), we found that suspensions of nanosized (∼100 nm initial mean diameter) titanium dioxide (nTiO(2)) led to toxicity in Daphnia magna at nominal concentrations of 3.8 (72-h EC(50)) and 0.73 mg/L (96-h EC(50)). However, nTiO(2) disappeared quickly from the ISO-medium water phase, resulting in toxicity levels as low as 0.24 mg/L (96-h EC(50)) based on measured concentrations. Moreover, we showed that nTiO(2) (∼100 nm) is significantly more toxic than non-nanosized TiO(2) (∼200 nm) prepared from the same stock suspension. Most importantly, we hypothesized a mechanistic chain of events for nTiO(2) toxicity in D. magna that involves the coating of the organism surface with nTiO(2) combined with a molting disruption. Neonate D. magna (≤6 h) exposed to 2 mg/L nTiO(2) exhibited a "biological surface coating" that disappeared within 36 h, during which the first molting was successfully managed by 100% of the exposed organisms. Continued exposure up to 96 h led to a renewed formation of the surface coating and significantly reduced the molting rate to 10%, resulting in 90% mortality. Because coating of aquatic organisms by manmade NP might be ubiquitous in nature, this form of physical NP toxicity might result in widespread negative impacts on environmental health.

Fungal composition on leaves explains pollutant-mediated indirect effects on amphipod feeding.

The energy stored in coarse particulate organic matter, e.g. leaf litter, is released to aquatic ecosystems by breakdown processes involving microorganisms and leaf shredding invertebrates. The palatability of leaves and thus the feeding of shredders on leaf material are highly influenced by microorganisms. However, implications in the colonization of leaves by microorganisms (=conditioning) caused by chemical stressors are rarely studied. Our laboratory experiments, therefore, investigated for the first time effects of a fungicide on the conditioning process of leaf material by means of food-choice experiments using Gammarus fossarum (Crustacea: Amphipoda). Additionally, microbial analyses were conducted to facilitate the mechanistic understanding of the observed behavior. Gammarids significantly preferred control leaf discs over those conditioned in presence of the fungicide tebuconazole at concentrations of 50 and 500 µg/L. Besides the decrease of fungal biomass with increasing fungicide concentration, also the leaf associated fungal community composition showed that species preferred by gammarids, such as Alatospora acumunata, Clavariopsis aquatica, or Flagellospora curvula, were more frequent in the control. Tetracladium marchalianum, however, which is rejected by gammarids, was abundant in all treatments suggesting an increasing importance of this species for the lower leaf palatability--as other more palatable fungal species were almost absent--in the fungicide treatments. Hence, the food-choice behavior of G. fossarum seems to be a suitable indicator for alterations in leaf associated microbial communities, especially fungal species composition, caused by chemical stressors. Finally, this or similar test systems may be a reasonable supplement to the environmental risk assessment of chemicals in order to achieve its protection goals, as on the one hand, indirect effects may occur far below concentrations known to affect gammarids directly, and on the other hand, the observed shifts in leaf associated microbial communities may have perpetuating implications in leaf shredding invertebrates.

Translocation of Sb and Ti in an undisturbed floodplain soil after application of Sb2O3 and TiO2 nanoparticles to the surface.

The pore water transport of antimony and titanium, applied as nanoparticles (NPs), was studied by spiking stable suspensions of two different nanomaterials on the surface of an undisturbed floodplain soil. For preparation of stable dispersions, two different strategies were followed. (i) Comparable to those used in industrial applications: titanium dioxide nanoparticles, with an average diameter of 99 nm, were prepared by high-energy ball milling in water, whereas for (ii) antimony trioxide (Sb(2)O(3); average diameter 121 nm) a dispersing agent (sodium salt of poly[(naphthaleneformaldehyde)sulfonate] (pNFS) in water) was used. The upper 17 cm of a floodplain soil (river Rhine, Germany) was sampled using the minimally invasive sediment or fauna incubation experiment (SOFIE® two compartment cell; 3 l volume each), which preserved the pore system of the soil. The cells were equipped with 450 and 100 nm filter probes at different depths providing a non-invasive sampling of the pore water. The pore water was sampled at different times (T = 0, 24, 48, 96 and 196 h) and analysed by inductively coupled plasma quadrupole mass spectrometry (ICP-QMS). Sb and Ti were transported via the pore water of the floodplain soil to a depth of 14 cm, corresponding to the maximum cell depth. The highest Sb concentration in the pore water was detected after 24 h at a depth of 5.5-8 cm. Although the spiked concentration was higher for Ti than for Sb, the total Ti concentration in the pore water of the spiked cell was lower. This indicates a stronger agglomeration of TiO(2) NPs or a more intensive interaction of Ti with the solid matrix and a faster transport of Sb towards deeper soil layers. The results show that metal(loid)s from metal oxide NPs are transported in the soil pore water and, hence, have the potential to act as the source of contamination of deeper soil layers after soil surface contamination.

Methylantimony and -arsenic species in sediment pore water tested with the sediment or fauna incubation experiment.

In this study, the speciation of arsenic (As) and antimony (Sb) across a water-sediment interface and the formation of mono-, di-, and trimethylated species overtime in a microfiltered pore water solution were examined. We used an experimental technique, known as the sediment or fauna incubation experiment (SOFIE), which enables the determination of chemical speciation across redox zones in undisturbed systems. Five different incubation experiments were run: Over a 76 day incubation period, pore water was sampled and speciated 5 times. These experiments revealed the complete methylated species pattern for arsenic and antimony in the microfiltered sediment pore water. This constitutes the first report of methylated As and Sb species in a true pore water solution of sediments. Predominant organic species were dimethylantimony (DMSb up to 2.7 microg/L) and dimethylarsenic (DMAs up to 4.3 microg/L) followed by monomethylated species (MMAs and MMSb). These data (i) indicate that methylation significantly influences the translocation of As and Sb in sediments, (ii) demonstrate good agreement between the occurrence of methylantimony and the occurrence of methylarsenic in the pore water, (iii) reveal that As transformation in sediments is faster than Sb transformation but is more susceptible to disturbances from acidification, and (iv) regarding the translocation of these elements and antimony in particular, methylation is clearly a relevant, and perhaps as yet underestimated, factor.

Methylated arsenic, antimony and tin species in soils.

Methylated species of antimony, arsenic and tin were examined in urban soils of the Ruhr basin, near the cities of Duisburg and Essen, Germany. The main aim of this study was to investigate the occurrence of mono-, di- and trimethylated species of these elements in urban soils. The influence of historical and present land use upon the species content was examined. The distribution of inorganic As, Sb and Sn and their methylated species along the profile depth was investigated. As, Sb and Sn speciation was performed by pH-gradient hydride generation purge and trap gas chromatography, followed by inductively-coupled plasma mass spectrometry (HG-PT-GC/ICP-MS). Species' structures were confirmed by GC-EI/MS-ICP-MS. Monomethylated Sb and As were the dominant species detected: the concentration of these metal(loid) species varied between <0.07-56 microg kg(-1) per dry mass. All dimethylated species and monomethyltin concentrations were between <0.01-7.6 microg kg(-1) per dry mass, and for the trimethylated species of all examined elements, concentrations between <0.001-0.63 microg kg(-1) per dry mass were detected. The highest organometal(loid) concentrations were observed in agricultural soils and garden soils; lower concentrations were found in the soils of abandoned industrial sites (wasteland, primary forest and grassland) and a flood plain soil of the Rhine. This result can be ascribed to both the cultivation and the increased biological activity of the agricultural soils, and the generally higher contamination, the disturbed structure and the artificial substrates (deposits from industrial sources) of the abandoned industrial soils. Due to periodical sedimentation, the flood plain profile was the only one where no depth dependence of organometal(loid) species concentration was detected. The other soil profiles showed a decrease of species content with increasing depth; this was particularly noticeable in soils with a clear change from a horizon with an organic character towards a mineral horizon, i.e. decreasing vitality from profile top to bottom. It is not as yet clear whether the organometal(loid) species are formed in the mineral horizons of the profiles or whether they are displaced from the organic, biologically-active horizons towards the mineral horizons. Field studies revealed that soil parameters like pH, water content or temperature did not correlate significantly with the degree of biomethylation observed. In contrast to the lower in vitro biomethylation efficiency of Sb vs. As in microbial incubations, we consistently detected higher proportions of transformed Sb compounds in situ in soil samples. These data may indicate a need to re-examine the currently accepted model of Sb biogeochemical cycling in the real environment.