Legacy of Coal Combustion: Widespread Contamination of Lake Sediments and Implications for Chronic Risks to Aquatic Ecosystems.

Elevated concentrations of toxic elements in coal ash pose human and ecological health risks upon release to the environment. Despite wide public concerns about water quality and human health risks from catastrophic coal ash spills and chronic leaking of coal ash ponds, coal ash disposal has only been partially regulated, and its impacts on aquatic sediment quality and ecological health have been overlooked. Here, we present a multiproxy approach of morphologic, magnetic, geochemical, and Sr isotopic analyses, revealing unmonitored coal ash releases over the past 40 to 70 years preserved in the sediment records of five freshwater lakes adjacent to coal-fired power plants across North Carolina. We detected significant sediment contamination and potential chronic ecological risks posed by the occurrence of hundreds of thousands of tons of coal ash solids mainly resulting from high-magnitude stormwater runoff/flooding and direct effluent discharge from coal ash disposal sites. The proximity of hundreds of disposal sites to natural waterways across the U.S. implies that such contamination is likely prevalent nationwide and expected to worsen with climate change.

The strontium isotope fingerprint of phosphate rocks mining.

High concentrations of metal(loid)s in phosphate rocks and wastewater associated with phosphate mining and fertilizer production operations pose potential contamination risks to water resources. Here, we propose using Sr isotopes as a tracer to determine possible water quality impacts induced from phosphate mining and fertilizers production. We utilized a regional case study in the northeastern Negev in Israel, where salinization of groundwater and a spring have been attributed to historic leaking and contamination from an upstream phosphate mining wastewater. This study presents a comprehensive dataset of major and trace elements, combined with Sr isotope analyses of the Rotem phosphate rocks, local aquifer carbonate rocks, wastewater from phosphate operation in Mishor Rotem Industries, saline groundwater suspected to be impacted by Rotem mining activities, and two types of background groundwater from the local Judea Group aquifer. The results of this study indicate that trace elements that are enriched in phosphate wastewater were ubiquitously present in the regional and non-contaminated groundwater at the same levels as detected in the impacted waters, and thus cannot be explicitly linked to the phosphate wastewater. The 87Sr/86Sr ratios of phosphate rocks (0.707794 ±â€¯5 × 10-5) from Mishor Rotem Industries were identical to that of associated wastewater (0.707789 ±â€¯3 × 10-5), indicating that the Sr isotopic fingerprint of phosphate rocks is preserved in its wastewater. The 87Sr/86Sr (0.707949 ±â€¯3 × 10-6) of the impacted saline groundwater were significantly different from those of the Rotem wastewater and the background saline groundwater, excluding phosphate mining effluents as the major source for contamination of the aquifer. Instead, the 87Sr/86Sr ratio of the impacted water was similar to the composition of brines from the Dead Sea, which suggests that the salinization was derived primarily from industrial Dead Sea effluents with distinctive Sr isotope and geochemical fingerprints.

Evaluation and Integration of Geochemical Indicators for Detecting Trace Levels of Coal Fly Ash in Soils.

Coal combustion residuals (CCRs), in particular, coal fly ash, are one of the major industrial solid wastes in the U.S., and due to their high concentrations of toxic elements, they could pose environmental and human health risks. Yet detecting coal fly ash in the environment is challenging given its small particle size. Here, we explore the utility and sensitivity of using geochemical indicators (trace elements, Ra nuclides, and Pb stable isotopes), combined with physical observation by optical point counting, for detecting the presence of trace levels of coal fly ash particles in surface soils near two coal-fired power plants in North Carolina and Tennessee. Through experimental work, mixing models, and field data, we show that trace elements can serve as a first-order detection tool for fly ash presence in surface soils; however, the accuracy and sensitivity of detection is limited for cases with low fly ash proportion (i.e., <10%) in the soil, which requires the integration of more robust Ra and Pb isotopic tracers. This study revealed the presence of fly ash particles in surface soils from both the recreational and residential areas, which suggests the fugitive emission of fly ash from the nearby coal-fired power plants.

Occurrence and distribution of hexavalent chromium in groundwater from North Carolina, USA.

Hexavalent chromium (Cr(VI)) is a groundwater contaminant that is potentially harmful to human health. Understanding the occurrence of Cr(VI) in groundwater resources is critical for evaluating its risks to human health. Here we report a large dataset (n = 1362) of Cr(VI) and total chromium (CrT) concentrations in public, private, and monitoring wells from different aquifers across North Carolina. These water quality data come from new and previous measurements conducted at Duke University, as well as data reported by the U.S. Environmental Protection Agency, the N.C. Department of Environmental Quality, and the U.S. Geological Survey. The data confirm that Cr(VI) is the predominant species of dissolved Cr and that groundwater from aquifers in the Piedmont region contain significantly higher concentrations than groundwater from the coastal plain. Though there is only one exceedance of the U.S. EPA Maximum Contaminant Level (100 µg/L for CrT) in the dataset, over half of all wells measured for Cr(VI) (470 out of 865) in the dataset exceeded the N.C. Health Advisory Level of 0.07 µg/L. Using information from this dataset, we explore three different approaches to predicting Cr(VI) in groundwater: (1) CrT concentrations as a proxy for Cr(VI); (2) Exceedance probabilities of health goals for groundwater from aquifers located in specific geologic areas; and (3) Censored linear regression using commonly measured field parameters (pH, electrical conductivity, dissolved oxygen) with relationships to Cr(VI) as regressors. Combining these approaches, we have identified several areas in the Piedmont region where Cr(VI) in drinking water wells is expected to be higher than the advisory level, which coincide with large population groundwater reliant populations. While this study focuses on N.C., the wide-spread occurrence of Cr(VI) in groundwater at concentrations above health guidelines in aquifers of the Piedmont region could pose high human health risks to large populations in the eastern U.S.

Evidence for unmonitored coal ash spills in Sutton Lake, North Carolina: Implications for contamination of lake ecosystems.

Coal combustion residuals (CCRs, also known as "coal ash") contain high concentrations of toxic and carcinogenic elements that can pose ecological and human health risks upon their release into the environment. About half of the CCRs that are generated annually in the U.S. are stored in coal ash impoundments and landfills, in most cases adjacent to coal plants and waterways. Leaking of coal ash ponds and CCR spills are major environmental concerns. One factor which may impact the safety of CCRs stored in impoundments and landfills is the storage area's predisposition to flooding. The southeastern U.S., in particular, has a large number of coal ash impoundments located in areas that are vulnerable to flooding. In order to test for the possible presence of CCR solids in lake sediments following Hurricane Florence, we analyzed the magnetic susceptibility, microscopic screening, trace element composition, and strontium isotope ratios of bottom sediments collected in 2015 and in 2018 from Sutton Lake in eastern North Carolina and compared them to a reference lake. The results suggest multiple, apparently previously unmonitored, CCR spills into Sutton Lake from adjacent CCR storage sites. The enrichment of metals in Sutton Lake sediments, particularly those with known ecological impact such as As, Se, Cu, Sb, Ni, Cd, V, and Tl, was similar to or even higher than those in stream sediments impacted by the Tennessee Valley Authority (TVA) in Kingston, Tennessee, and the Dan River, North Carolina coal ash spills, and exceeded ecological screening standards for sediments. High levels of contaminants were also found in leachates extracted from Sutton Lake sediments and co-occurring pore water, reflecting their mobilization to the ambient environment. These findings highlight the risks of large-scale unmonitored spills of coal ash solids from storage facilities following major storm events and contamination of nearby water resources throughout the southeastern U.S.

Origin of Flowback and Produced Waters from Sichuan Basin, China.

Shale gas extraction through hydraulic fracturing and horizontal drilling is increasing in China, particularly in Sichuan Basin. Production of unconventional shale gas with minimal environmental effects requires adequate management of wastewater from flowback and produced water (FP water) that is coextracted with natural gas. Here we present, for the first time, inorganic chemistry and multiple isotope (oxygen, hydrogen, boron, strontium, radium) data for FP water from 13 shale gas wells from the Lower Silurian Longmaxi Formation in the Weiyuan gas field, as well as produced waters from 35 conventional gas wells from underlying (Sinian, Cambrian) and overlying (Permian, Triassic) formations in Sichuan Basin. The chemical and isotope data indicate that the formation waters in Sichuan Basin originated from relics of different stages of evaporated seawater modified by water-rock interactions. The FP water from shale gas wells derives from blending of injected hydraulic fracturing water and entrapped saline (Cl ∼ 50,000 mg/L) formation water. Variations in the chemistry, δ18O, δ11B, and 87Sr/86Sr of FP water over time indicate that the mixing between the two sources varies with time, with a contribution of 75% (first 6 months) to 20% (>year) of the injected hydraulic fracturing water in the blend that compose the FP water. Mass-balance calculation suggests that the returned hydraulic fracturing water consisted of 28-49% of the volume of the injected hydraulic fracturing water, about a year after the initial hydraulic fracturing. We show differential mobilization of Na, B, Sr, and Li from the shale rocks during early stages of operation, which resulted in higher Na/Cl, B/Cl, Li/Cl, and 87Sr/86Sr and lower δ11B of the FP water during early stages of FP water formation relative to the original saline formation water recorded in late stages FP water. This study provides a geochemical framework for characterization of formation waters from different geological strata, and thus the ability to distinguish between different sources of oil and gas wastewater in Sichuan Basin.

Selenium Ecotoxicology in Freshwater Lakes Receiving Coal Combustion Residual Effluents: A North Carolina Example.

Anthropogenic activities resulting in releases of selenium-laden waste streams threaten freshwater ecosystems. Lake ecosystems demand special consideration because they are characterized by prolonged retention of selenium and continuous cycling of the element through the food chain, through which it becomes available to toxicologically susceptible egg-laying vertebrates. This study documents the current selenium burden of lakes in North Carolina (NC) with historic selenium inputs from nearby coal-fired power plants. We measured selenium concentrations in surface waters, sediment pore waters, and resident fish species from coal combustion residual (CCR)-impacted lakes and paired reference lakes. The data are related to levels of recent selenium inputs and analyzed in the context of recently updated federal criteria for the protection of aquatic life. We show that the Se content of fish from lakes with the highest selenium inputs regularly exceed these criteria and are comparable to those measured during historic fish extirpation events in the United States. Large legacy depositions of CCRs within reservoir sediments are likely to sustain Se toxicity for many years despite recent laws to limit CCR discharge into surface waters in NC. Importantly, the widespread use of high-selenium coals for electricity generation extends the potential risk for aquatic ecosystem impacts beyond U.S. borders.

Trends in the Rare Earth Element Content of U.S.-Based Coal Combustion Fly Ashes.

Rare earth elements (REEs) are critical and strategic materials in the defense, energy, electronics, and automotive industries. The reclamation of REEs from coal combustion fly ash has been proposed as a way to supplement REE mining. However, the typical REE contents in coal fly ash, particularly in the United States, have not been comprehensively documented or compared among the major types of coal feedstocks that determine fly ash composition. The objective of this study was to characterize a broad selection of U.S. fly ashes of varied geological origin in order to rank their potential for REE recovery. The total and nitric acid-extractable REE content for more than 100 ash samples were correlated with characteristics such as the major element content and coal basin to elucidate trends in REE enrichment. Average total REE content (defined as the sum of the lanthanides, yttrium, and scandium) for ashes derived from Appalachian sources was 591 mg kg(-1) and significantly greater than in ashes from Illinois and Powder River basin coals (403 and 337 mg kg(-1), respectively). The fraction of critical REEs (Nd, Eu, Tb, Dy, Y, and Er) in the fly ashes was 34-38% of the total and considerably higher than in conventional ores (typically less than 15%). Powder River Basin ashes had the highest extractable REE content, with 70% of the total REE recovered by heated nitric acid digestion. This is likely due to the higher calcium content of Powder River Basin ashes, which enhances their solubility in nitric acid. Sc, Nd, and Dy were the major contributors to the total REE value in fly ash, based on their contents and recent market prices. Overall, this study shows that coal fly ash production could provide a substantial domestic supply of REEs, but the feasibility of recovery depends on the development of extraction technologies that could be tailored to the major mineral content and origins of the feed coal for the ash.

Iodide, bromide, and ammonium in hydraulic fracturing and oil and gas wastewaters: environmental implications.

The expansion of unconventional shale gas and hydraulic fracturing has increased the volume of the oil and gas wastewater (OGW) generated in the U.S. Here we demonstrate that OGW from Marcellus and Fayetteville hydraulic fracturing flowback fluids and Appalachian conventional produced waters is characterized by high chloride, bromide, iodide (up to 56 mg/L), and ammonium (up to 420 mg/L). Br/Cl ratios were consistent for all Appalachian brines, which reflect an origin from a common parent brine, while the I/Cl and NH4/Cl ratios varied among brines from different geological formations, reflecting geogenic processes. There were no differences in halides and ammonium concentrations between OGW originating from hydraulic fracturing and conventional oil and gas operations. Analysis of discharged effluents from three brine treatment sites in Pennsylvania and a spill site in West Virginia show elevated levels of halides (iodide up to 28 mg/L) and ammonium (12 to 106 mg/L) that mimic the composition of OGW and mix conservatively in downstream surface waters. Bromide, iodide, and ammonium in surface waters can impact stream ecosystems and promote the formation of toxic brominated-, iodinated-, and nitrogen disinfection byproducts during chlorination at downstream drinking water treatment plants. Our findings indicate that discharge and accidental spills of OGW to waterways pose risks to both human health and the environment.

Boron and strontium isotopic characterization of coal combustion residuals: validation of new environmental tracers.

In the U.S., coal fired power plants produce over 136 million tons of coal combustion residuals (CCRs) annually. CCRs are enriched in toxic elements, and their leachates can have significant impacts on water quality. Here we report the boron and strontium isotopic ratios of leaching experiments on CCRs from a variety of coal sources (Appalachian, Illinois, and Powder River Basins). CCR leachates had a mostly negative δ(11)B, ranging from -17.6 to +6.3‰, and (87)Sr/(86)Sr ranging from 0.70975 to 0.71251. Additionally, we utilized these isotopic ratios for tracing CCR contaminants in different environments: (1) the 2008 Tennessee Valley Authority (TVA) coal ash spill affected waters; (2) CCR effluents from power plants in Tennessee and North Carolina; (3) lakes and rivers affected by CCR effluents in North Carolina; and (4) porewater extracted from sediments in lakes affected by CCRs. The boron isotopes measured in these environments had a distinctive negative δ(11)B signature relative to background waters. In contrast (87)Sr/(86)Sr ratios in CCRs were not always exclusively different from background, limiting their use as a CCR tracer. This investigation demonstrates the validity of the combined geochemical and isotopic approach as a unique and practical identification method for delineating and evaluating the environmental impact of CCRs.

Isotopic imprints of mountaintop mining contaminants.

Mountaintop mining (MTM) is the primary procedure for surface coal exploration within the central Appalachian region of the eastern United States, and it is known to contaminate streams in local watersheds. In this study, we measured the chemical and isotopic compositions of water samples from MTM-impacted tributaries and streams in the Mud River watershed in West Virginia. We systematically document the isotopic compositions of three major constituents: sulfur isotopes in sulfate (δ(34)SSO4), carbon isotopes in dissolved inorganic carbon (δ(13)CDIC), and strontium isotopes ((87)Sr/(86)Sr). The data show that δ(34)SSO4, δ(13)CDIC, Sr/Ca, and (87)Sr/(86)Sr measured in saline- and selenium-rich MTM impacted tributaries are distinguishable from those of the surface water upstream of mining impacts. These tracers can therefore be used to delineate and quantify the impact of MTM in watersheds. High Sr/Ca and low (87)Sr/(86)Sr characterize tributaries that originated from active MTM areas, while tributaries from reclaimed MTM areas had low Sr/Ca and high (87)Sr/(86)Sr. Leaching experiments of rocks from the watershed show that pyrite oxidation and carbonate dissolution control the solute chemistry with distinct (87)Sr/(86)Sr ratios characterizing different rock sources. We propose that MTM operations that access the deeper Kanawha Formation generate residual mined rocks in valley fills from which effluents with distinctive (87)Sr/(86)Sr and Sr/Ca imprints affect the quality of the Appalachian watersheds.

The impact of coal combustion residue effluent on water resources: a North Carolina example.

The combustion of coal to generate electricity produces about 130 million tons of coal combustion residues (CCRs) each year in the United States; yet their environmental implications are not well constrained. This study systematically documents the quality of effluents discharged from CCR settling ponds or cooling water at ten sites and the impact on associated waterways in North Carolina, compared to a reference lake. We measured the concentrations of major and trace elements in over 300 samples from CCR effluents, surface water from lakes and rivers at different downstream and upstream points, and pore water extracted from lake sediments. The data show that CCR effluents contain high levels of contaminants that in several cases exceed the U.S. EPA guidelines for drinking water and ecological effects. This investigation demonstrates the quality of receiving waters in North Carolina depends on (1) the ratio between effluent flux and freshwater resource volumes and (2) recycling of trace elements through adsorption on suspended particles and release to deep surface water or pore water in bottom sediments during periods of thermal water stratification and anoxic conditions. The impact of CCRs is long-term, which influences contaminant accumulation and the health of aquatic life in water associated with coal-fired power plants.

Environmental impacts of the coal ash spill in Kingston, Tennessee: an 18-month survey.

An 18 month investigation of the environmental impacts of the Tennessee Valley Authority (TVA) coal ash spill in Kingston, Tennessee combined with leaching experiments on the spilled TVA coal ash have revealed that leachable coal ash contaminants (LCACs), particularly arsenic, selenium, boron, strontium, and barium, have different effects on the quality of impacted environments. While LCACs levels in the downstream river water are relatively low and below the EPA drinking water and ecological thresholds, elevated levels were found in surface water with restricted water exchange and in pore water extracted from the river sediments downstream from the spill. The high concentration of arsenic (up to 2000 µg/L) is associated with some degree of anoxic conditions and predominance of the reduced arsenic species (arsenite) in the pore waters. Laboratory leaching simulations show that the pH and ash/water ratio control the LCACs' abundance and geochemical composition of the impacted water. These results have important implications for the prediction of the fate and migration of LCACs in the environment, particularly for the storage of coal combustion residues (CCRs) in holding ponds and landfills, and any potential CCRs effluents leakage into lakes, rivers, and other aquatic systems.

Survey of the potential environmental and health impacts in the immediate aftermath of the coal ash spill in Kingston, Tennessee.

An investigation of the potential environmental and health impacts in the immediate aftermath of one of the largest coal ash spills in U.S. history at the Tennessee Valley Authority (TVA) Kingston coal-burning power plant has revealed three major findings. First the surface release of coal ash with high levels of toxic elements (As = 75 mg/kg; Hg = 150 microg/kg) and radioactivity (226Ra + 228Ra = 8 pCi/g) to the environment has the potential to generate resuspended ambient fine particles (< 10 microm) containing these toxics into the atmosphere that may pose a health risk to local communities. Second, leaching of contaminants from the coal ash caused contamination of surface waters in areas of restricted water exchange, but only trace levels were found in the downstream Emory and Clinch Rivers due to river dilution. Third, the accumulation of Hg- and As-rich coal ash in river sediments has the potential to have an impact on the ecological system in the downstream rivers by fish poisoning and methylmercury formation in anaerobic river sediments.

Mid-Pliocene sea level and continental ice volume based on coupled benthic Mg/Ca palaeotemperatures and oxygen isotopes.

Ostracode magnesium/calcium (Mg/Ca)-based bottom-water temperatures were combined with benthic foraminiferal oxygen isotopes in order to quantify the oxygen isotopic composition of seawater, and estimate continental ice volume and sea-level variability during the Mid-Pliocene warm period, ca 3.3-3.0Ma. Results indicate that, following a low stand of approximately 65m below present at marine isotope stage (MIS) M2 (ca 3.3Ma), sea level generally fluctuated by 20-30m above and below a mean value similar to present-day sea level. In addition to the low-stand event at MIS M2, significant low stands occurred at MIS KM2 (-40 m), G22 (-40m) and G16 (-60m). Six high stands of +10m or more above present day were also observed; four events (+10, +25,+15 and +30 m) from MIS M1 to KM3, a high stand of +15m at MIS K1, and a high stand of +25m at MIS G17. These results indicate that continental ice volume varied significantly during the Mid-Pliocene warm period and that at times there were considerable reductions of Antarctic ice.