Probing nanopore surface chemistry through real-time measurements of nanopore conductance response to pH changes.

We developed a flow cell apparatus and method for streamlined, real-time measurements of nanopore conductance (G) in response to pH changes. By time-resolving the measurements of interfacial kinetics, we were able to probe nanopore surface coating presence and properties more thoroughly than in our previous work. Nanopores have emerged as a prominent tool for single-molecule sensing, characterization, and sequencing of DNA, proteins, and carbohydrates. Nanopore surface chemistry affects analyte passage, signal characteristics, and sensor lifetime through a range of electrostatic, electrokinetic, and chemical phenomena, and optimizing nanopore surface chemistry has become increasingly important. Our work makes nanopore surface chemistry characterizations more accessible as a complement to routine single-pH conductance measurements used to infer nanopore size. We detail the design and operation of the apparatus and discuss the trends in G and capacitance. Characteristic G vs pH curves matching those obtained in previous work could be obtained with the addition of time-resolved interfacial kinetic information. We characterized native and chemically functionalized (carboxylated) silicon nitride (SiNx) nanopores, illustrating how the method can inform of thin film compositions, interfacial kinetics, and nanoscale chemical phenomena.

N-Heterocyclic carbene-based gold etchants.

N-Heterocyclic carbenes (NHCs) are an emerging alternative to thiols for the formation of stable self-assembled monolayers (SAMs) on gold. We examined several different species that have been used to produce NHC-based monolayers on gold, namely 1,3-diisopropyl-5-nitrobenzimidazolium iodide, 1,3-diisopropyl-5-nitrobenzimidazolium hydrogen carbonate, bis(1,3-diisopropyl-5-nitrobenzimidazolium)gold(I) iodide, and 1,3-diisopropyl-5-nitrobenzimidazole-2-ylidene. Contrary to expectation, solutions containing the first two species in tetrahydrofuran and dichloromethane caused visible loss of gold from thin-film-coated glass slides. The use of toluene solutions of all species resulted in no apparent dissolution of gold. We present scanning electron micrographs and elemental imaging analyses by energy dispersive X-ray spectroscopy to examine the effect of solutions of each species on the gold film. This work highlights the risk of unwanted etching during some routes to NHC-based surface functionalization but also the potential for deliberate etching, with the outcome determined by choice of chemically synthesized organic species and solvent.

Biofouling potential of surface-enhanced Raman scattering-based seawater quality sensors by Ulva spp.

This study investigated the biofouling potential of surface-enhanced Raman scattering (SERS)-based sensor materials in the context of marine environments. Uncoated and monolithic commercial gold (Au) silicon nanopillar array SERS substrates, Au-coated carbon black nanoparticle (AuCB NP) substrates, uncoated and Au sputter-coated in-house SERS, and uncoated and Au sputter-coated glass controls were tested for biofouling potential using Ulva spp. as model biofouling organisms. The mean percentages of Ulva spp. zoospores that adhered per mm2 (×103) on the uncoated and coated Au silicon nanopillar array, AuCB NP, uncoated and Au sputter-coated in-house, and uncoated and Au sputter-coated glass substrates were 10.28%, 5.45%, 10.49%, 3.25%, 24.84%, 12.86% and 7.78%, respectively. Results indicated that surface properties such as hydrophobicity, roughness, Au sputter-coating and the presence of micro-refuges on nano- and microstructured substrates were critical to the biofouling formation.

Photoswitchable Binary Nanopore Conductance and Selective Electronic Detection of Single Biomolecules under Wavelength and Voltage Polarity Control.

We fabricated photoregulated thin-film nanopores by covalently linking azobenzene photoswitches to silicon nitride pores with ∼10 nm diameters. The photoresponsive coatings could be repeatedly optically switched with deterministic ∼6 nm changes to the effective nanopore diameter and of ∼3× to the nanopore ionic conductance. The sensitivity to anionic DNA and a neutral complex carbohydrate biopolymer (maltodextrin) could be photoswitched "on" and "off" with an analyte selectivity set by applied voltage polarity. Photocontrol of nanopore state and mass transport characteristics is important for their use as ionic circuit elements (e.g., resistors and binary bits) and as chemically tuned filters. It expands single-molecule sensing capabilities in personalized medicine, genomics, glycomics, and, augmented by voltage polarity selectivity, especially in multiplexed biopolymer information storage schemes. We demonstrate repeatedly photocontrolled stable nanopore size, polarity, conductance, and sensing selectivity, by illumination wavelength and voltage polarity, with broad utility including single-molecule sensing of biologically and technologically important polymers.

Targeting improved reproducibility in surface-enhanced Raman spectroscopy with planar substrates using 3D printed alignment holders.

Drop-casting is frequently used to deliver a sample for surface-enhanced Raman spectroscopy (SERS) and can result in inhomogeneous sample distribution during solvent evaporation. While soaking can provide better analyte homogeneity, it may require more sample than is available. Failure to optically sample analyte-rich substrate locations can compromise measurement outcomes. We developed and tested 3D printed SERS substrate holders that provided spatial registry of the dried sample droplet center for subsequent optical measurements. We found that deliberate and controlled spatial offsets (0-900 µm) between the analyte drop center and the laser excitation prevented signal intensity drops of as much as ∼3× and improved reproducibility. Thus, the use of offset-controlled 3D printed holders provided a quick and inexpensive way to improve the reliability of SERS measurements when using the convenient and popular choice of sample drop-casting.

Synthetic heparan sulfate standards and machine learning facilitate the development of solid-state nanopore analysis.

The application of solid-state (SS) nanopore devices to single-molecule nucleic acid sequencing has been challenging. Thus, the early successes in applying SS nanopore devices to the more difficult class of biopolymer, glycosaminoglycans (GAGs), have been surprising, motivating us to examine the potential use of an SS nanopore to analyze synthetic heparan sulfate GAG chains of controlled composition and sequence prepared through a promising, recently developed chemoenzymatic route. A minimal representation of the nanopore data, using only signal magnitude and duration, revealed, by eye and image recognition algorithms, clear differences between the signals generated by four synthetic GAGs. By subsequent machine learning, it was possible to determine disaccharide and even monosaccharide composition of these four synthetic GAGs using as few as 500 events, corresponding to a zeptomole of sample. These data suggest that ultrasensitive GAG analysis may be possible using SS nanopore detection and well-characterized molecular training sets.

Chemically tailoring nanopores for single-molecule sensing and glycomics.

A nanopore can be fairly-but uncharitably-described as simply a nanofluidic channel through a thin membrane. Even this simple structural description holds utility and underpins a range of applications. Yet significant excitement for nanopore science is more readily ignited by the role of nanopores as enabling tools for biomedical science. Nanopore techniques offer single-molecule sensing without the need for chemical labelling, since in most nanopore implementations, matter is its own label through its size, charge, and chemical functionality. Nanopores have achieved considerable prominence for single-molecule DNA sequencing. The predominance of this application, though, can overshadow their established use for nanoparticle characterization and burgeoning use for protein analysis, among other application areas. Analyte scope continues to be expanded, and with increasing analyte complexity, success will increasingly hinge on control over nanopore surface chemistry to tune the nanopore, itself, and to moderate analyte transport. Carbohydrates are emerging as the latest high-profile target of nanopore science. Their tremendous chemical and structural complexity means that they challenge conventional chemical analysis methods and thus present a compelling target for unique nanopore characterization capabilities. Furthermore, they offer molecular diversity for probing nanopore operation and sensing mechanisms. This article thus focuses on two roles of chemistry in nanopore science: its use to provide exquisite control over nanopore performance, and how analyte properties can place stringent demands on nanopore chemistry. Expanding the horizons of nanopore science requires increasing consideration of the role of chemistry and increasing sophistication in the realm of chemical control over this nanoscale milieu.

Beyond nanopore sizing: improving solid-state single-molecule sensing performance, lifetime, and analyte scope for omics by targeting surface chemistry during fabrication.

Solid-state nanopores (SSNs) are single-molecule resolution sensors with a growing footprint in real-time bio-polymer profiling-most prominently, but far from exclusively, DNA sequencing. SSNs accessibility has increased with the advent of controlled dielectric breakdown (CDB), but severe fundamental challenges remain: drifts in open-pore current and (irreversible) analyte sticking. These behaviors impede basic research and device development for commercial applications and can be dramatically exacerbated by the chemical complexity and physical property diversity of different analytes. We demonstrate a SSN fabrication approach attentive to nanopore surface chemistry during pore formation, and thus create nanopores in silicon nitride (SiNx) capable of sensing a wide analyte scope-nucleic acid (double-stranded DNA), protein (holo-human serum transferrin) and glycan (maltodextrin). In contrast to SiNx pores fabricated without this comprehensive approach, the pores are Ohmic in electrolyte, have extremely stable open-pore current during analyte translocation (>1 h) over a broad range of pore diameters ([Formula: see text]3- ∼30 nm) with spontaneous current correction (if current deviation occurs), and higher responsiveness (i.e. inter-event frequency) to negatively charged analytes (∼6.5 × in case of DNA). These pores were fabricated by modifying CDB with a chemical additive-sodium hypochlorite-that resulted in dramatically different nanopore surface chemistry including ∼3 orders of magnitude weaker Ka (acid dissociation constant of the surface chargeable head-groups) compared to CDB pores which is inextricably linked with significant improvements in nanopore performance with respect to CDB pores.

Push-Button Method To Create Nanopores Using a Tesla-Coil Lighter.

Controlled dielectric breakdown (CDB) of silicon nitride thin films immersed in electrolyte solution has been used to fabricate single nanofluidic channels with ∼10 nm and smaller diameters, nanopores, useful in single-molecule sensing and ionic circuit construction. A hand-held Tesla-coil lighter was used to form nanofluidic ionic conductors through a ∼10 nm thick silicon nitride membrane. Modifications to the conventional approach were required by the low-overhead Tesla-coil-assisted method (TCAM): increased circuit resistance by including water in place of electrolyte and discrete rather than continuous voltage applications. The resulting ionic conductance could be tuned with the number of voltage applications. TCAM and conventional CDB produced nanopores with different conductance versus pH curves, suggesting different surface chemistry. Nevertheless, sensing experiments using the canonical test molecule, λ-DNA, produced signals comparable to translocation results through solid-state nanopores fabricated by other methods. Thus, the TCAM method offers flexibility in fabrication and in the properties and function of the nanoscale ionic conductors that it can generate.

An Open Source, Iterative Dual-Tree Wavelet Background Subtraction Method Extended from Automated Diffraction Pattern Analysis to Optical Spectroscopy.

Background subtraction is a general problem in spectroscopy often addressed with application-specific techniques, or methods that introduce a variety of implementation barriers such as having to specify peak-free regions of the spectrum. An iterative dual-tree complex wavelet transform-based background subtraction method (DTCWT-IA) was recently developed for the analysis of ultrafast electron diffraction patterns. The method was designed to require minimal user intervention, to support streamlined analysis of many diffraction patterns with complex overlapping peaks and time-varying backgrounds, and is implemented in an open-source computer program. We examined the performance of DTCWT-IA for the analysis of spectra acquired by a range of optical spectroscopies including ultraviolet-visible spectroscopy (UV-Vis), X-ray photoelectron spectroscopy (XPS), and surface-enhanced Raman spectroscopy (SERS). A key benefit of the method is that the user need not specify regions of the spectrum where no peaks are expected to occur. SER spectra were used to investigate the robustness of DTCWT-IA to signal-to-noise levels in the spectrum and to user operation, specifically to two of the algorithm parameter settings: decomposition level and iteration number. The single, general DTCWT-IA implementation performs well in comparison to the different conventional approaches to background subtraction for UV-Vis, XPS, and SERS, while requiring minimal input. The method thus holds the same potential for optical spectroscopy as for ultrafast electron diffraction, namely streamlined analysis of spectra with complex distributions of peaks and varying signal levels, thus supporting real-time spectral analysis or the analysis of data acquired from different sources.

Chemically Functionalizing Controlled Dielectric Breakdown Silicon Nitride Nanopores by Direct Photohydrosilylation.

Nanopores are a prominent enabling tool for single-molecule applications such as DNA sequencing, protein profiling, and glycomics, and the construction of ionic circuit elements. Silicon nitride (SiNx) is a leading scaffold for these <100 nm-diameter nanofluidic ion-conducting channels, but frequently challenging surface chemistry remains an obstacle to their use. We functionalized more than 100 SiNx nanopores with different surface terminations-acidic (Si-R-OH, Si-R-CO2H), basic (Si-R-NH2), and nonionizable (Si-R-C6H3(CF3)2)-to chemically tune the nanopore size, surface charge polarity, and subsequent chemical reactivity and to change their conductance by changes of solution pH. The initial one-reaction-step covalent chemical film formation was by hydrosilylation and could be followed by straightforward condensation and click reactions. The hydrosilylation reaction step used neat reagents with no special precautions such as guarding against water content. A key feature of the approach was to combine controlled dielectric breakdown (CDB) with hydrosilylation to create and functionalize SiNx nanopores. CDB thus replaced the detrimental but conventionally necessary surface pretreatment with hydrofluoric acid. Proof-of-principle detection of the canonical test molecule, λ-DNA, yielded signals that showed that the functionalized pores were not obstructed by chemical treatments but could translocate the biopolymer. The characteristics were tuned by the surface coating character. This robust and flexible surface coating method, freed by CDB from HF etching, portends the development of nanopores with surface chemistry tuned to match the application, extending even to the creation of biomimetic nanopores.

Geometry-Based Self-Assembly of Histone-DNA Nanostructures at Single-Nucleotide Resolution.

Histones are basic protein monomers capable of interacting with DNA, providing the mechanism of DNA compaction inside the cell nucleus. The well-ordered assembly process of histone and DNA is a potential candidate as the approach for building DNA-protein nanostructures. Here, utilizing the sequence-independent histone-DNA interaction, we present an approach to self-assemble histones and single-stranded DNA (ssDNA) to form well-defined histone-DNA (sHD) nanoparticles and their multidimensional cross-linked complexes (cHD). By using various molecular biology and microscopy techniques, we elucidate the structure of these complexes, and we show that they are formed at carefully controlled conditions of temperature, ionic strength, concentration, and incubation time. We also demonstrate using a set of ssDNA molecular rulers and a geometric accommodation model that the assembly of sHD and cHD particles proceeds with precise geometry so that the number of ssDNA in these particles can be programmed by the length of ssDNA. We further show that the formation of cHD amplifies the effect of the length of ssDNA on the self-assembly, allowing for distinguishing ssDNA of different lengths at single nucleotide resolution. We envision that our geometry-directed approach of self-assembling histone-DNA nanostructures and the fundamental insights can serve as a structural platform to advance building precisely ordered DNA-protein nanostructures.

Surveying silicon nitride nanopores for glycomics and heparin quality assurance.

Polysaccharides have key biological functions and can be harnessed for therapeutic roles, such as the anticoagulant heparin. Their complexity-e.g., >100 monosaccharides with variety in linkage and branching structure-significantly complicates analysis compared to other biopolymers such as DNA and proteins. More, and improved, analysis tools have been called for, and here we demonstrate that solid-state silicon nitride nanopore sensors and tuned sensing conditions can be used to reliably detect native polysaccharides and enzymatic digestion products, differentiate between different polysaccharides in straightforward assays, provide new experimental insights into nanopore electrokinetics, and uncover polysaccharide properties. We show that nanopore sensing allows us to easily differentiate between a clinical heparin sample and one spiked with the contaminant that caused deaths in 2008 when its presence went undetected by conventional assays. The work reported here lays a foundation to further explore polysaccharide characterization and develop assays using thin-film solid-state nanopore sensors.

Conductance-based profiling of nanopores: Accommodating fabrication irregularities.

Solid-state nanopores are nanoscale channels through otherwise impermeable membranes. Single molecules or particles can be passed through electrolyte-filled nanopores by, e.g. electrophoresis, and then detected through the resulting physical displacement of ions within the nanopore. Nanopore size, shape, and surface chemistry must be carefully controlled, and on extremely challenging <10 nm-length scales. We previously developed a framework to characterize nanopores from the time-dependent changes in their conductance as they are being formed through solution-phase nanofabrication processes with the appeal of ease and accessibility. We revisited this simulation work, confirmed the suitability of the basic conductance equation using the results of time-dependent experimental conductance measurements during nanopore fabrication by Yanagi et al., and then deliberately relaxed the model constraints to allow for (i) the presence of defects; and (ii) the formation of two small pores instead of one larger one. Our simulations demonstrated that the time-dependent conductance formalism supports the detection and characterization of defects, as well as the determination of pore number, but with implementation performance depending on the measurement context and results. In some cases, the ability to discriminate numerically between the correct and incorrect nanopore profiles was slight, but with accompanying differences in candidate nanopore dimensions that could yield to post-fabrication conductance profiling, or be used as convenient uncertainty bounds. Time-dependent nanopore conductance thus offers insight into nanopore structure and function, even in the presence of fabrication defects.

A comparison of SERS and MEF of rhodamine 6G on a gold substrate.

Rhodamine 6G is spin-cast onto gold surfaces and the reflectance, emission, excitation, and SERS spectra are reported. Electron microscopy shows that the particle sizes of the gold are uniform for all preparations. Reflection spectra demonstrate the spectroscopic signature for Rh6G aggregates for thicker films and that the gold plasmon band shifts due to the refractive index change on the surface. The intensity of the SERS spectra increases with increasing surface coverage but the change is nonlinear between submonolayer and multilayer surface densities. The SERS resonance frequencies are unchanged as a function of Rh6G thickness, indicating that there is no coupling between Rh6G molecules in the ground state. The emission spectra behave unexpectedly as a function of Rh6G coverage. At submonolayer coverage the emission is relatively strong, decreases as the surface density increases to a monolayer, and then increases as the Rh6G thickness increases. Excitation spectra demonstrate that the emitting species at low surface density is monomeric but for thicker layers the moiety responsible for emission is Rh6G excited state aggregates. For the thicker films, the Rh6G acts as its own dielectric layer for metal enhanced fluorescence of the aggregates, which is the first example of a system where the fluorophore acts as its own dielectric for metal enhanced fluorescence. The intensity of the aggregate emission on gold intensity is three times of that found when Rh6G is deposited on glass. The gold induces emission in the Rh6G excited state aggregates that are quenched in the absence of the plasmon field.

Through a Window, Brightly: A Review of Selected Nanofabricated Thin-Film Platforms for Spectroscopy, Imaging, and Detection.

We present a review of the use of selected nanofabricated thin films to deliver a host of capabilities and insights spanning bioanalytical and biophysical chemistry, materials science, and fundamental molecular-level research. We discuss approaches where thin films have been vital, enabling experimental studies using a variety of optical spectroscopies across the visible and infrared spectral range, electron microscopies, and related techniques such as electron energy loss spectroscopy, X-ray photoelectron spectroscopy, and single molecule sensing. We anchor this broad discussion by highlighting two particularly exciting exemplars: a thin-walled nanofluidic sample cell concept that has advanced the discovery horizons of ultrafast spectroscopy and of electron microscopy investigations of in-liquid samples; and a unique class of thin-film-based nanofluidic devices, designed around a nanopore, with expansive prospects for single molecule sensing. Free-standing, low-stress silicon nitride membranes are a canonical structural element for these applications, and we elucidate the fabrication and resulting features-including mechanical stability, optical properties, X-ray and electron scattering properties, and chemical nature-of this material in this format. We also outline design and performance principles and include a discussion of underlying material preparations and properties suitable for understanding the use of alternative thin-film materials such as graphene.

Solution-Based Photo-Patterned Gold Film Formation on Silicon Nitride.

Silicon nitride fabricated by low-pressure chemical vapor deposition (LPCVD) to be silicon-rich (SiNx), is a ubiquitous insulating thin film in the microelectronics industry, and an exceptional structural material for nanofabrication. Free-standing <100 nm thick SiNx membranes are especially compelling, particularly when used to deliver forefront molecular sensing capabilities in nanofluidic devices. We developed an accessible, gentle, and solution-based photodirected surface metallization approach well-suited to forming patterned metal films as integral structural and functional features in thin-membrane-based SiNx devices-for use as electrodes or surface chemical functionalization platforms, for example-augmenting existing device capabilities and properties for a wide range of applications.

Real-Time Profiling of Solid-State Nanopores During Solution-Phase Nanofabrication.

We describe a method for simply characterizing the size and shape of a nanopore during solution-based fabrication and surface modification, using only low-overhead approaches native to conventional nanopore measurements. Solution-based nanopore fabrication methods are democratizing nanopore science by supplanting the traditional use of charged-particle microscopes for fabrication, but nanopore profiling has customarily depended on microscopic examination. Our approach exploits the dependence of nanopore conductance in solution on nanopore size, shape, and surface chemistry in order to characterize nanopores. Measurements of the changing nanopore conductance during formation by etching or deposition can be analyzed using our method to characterize the nascent nanopore size and shape, beyond the typical cylindrical approximation, in real-time. Our approach thus accords with ongoing efforts to broaden the accessibility of nanopore science from fabrication through use: it is compatible with conventional instrumentation and offers straightforward nanoscale characterization of the core tool of the field.