Embedding Reverse Electron Transfer Between Stably Bare Cu Nanoparticles and Cation-Vacancy CuWO4.

Cu nanoparticles (NPs) have attracted widespread attention in electronics, energy, and catalysis. However, conventionally synthesized Cu NPs face some challenges such as surface passivation and agglomeration in applications, which impairs their functionalities in the physicochemical properties. Here, the issues above by engineering an embedded interface of stably bare Cu NPs on the cation-vacancy CuWO4 support is addressed, which induces the strong metal-support interactions and reverse electron transfer. Various atomic-scale analyses directly demonstrate the unique electronic structure of the embedded Cu NPs with negative charge and anion oxygen protective layer, which mitigates the typical degradation pathways such as oxidation in ambient air, high-temperature agglomeration, and CO poisoning adsorption. Kinetics and in situ spectroscopic studies unveil that the embedded electron-enriched Cu NPs follow the typical Eley-Rideal mechanism in CO oxidation, contrasting the Langmuir-Hinshelwood mechanism on the traditional Cu NPs. This mechanistic shift is driven by the Coulombic repulsion in anion oxygen layer, enabling its direct reaction with gaseous CO to form the easily desorbed monodentate carbonate.

Cold and exogenous calcium alter Allium fistulosum cell wall pectin to depress intracellular freezing temperatures.

De-methyl esterification of homogalacturonan and subsequent cross-linking with Ca2+ is hypothesized to enhance the freezing survival of cold acclimated plants by reducing the porosity of primary cell walls. To test this theory, we collected leaf epidermal peels from non- (23/18 °C) and cold acclimated (2 weeks at 12/4 °C) Japanese bunching onion (Allium fistulosum L.). Cold acclimation enhanced the temperature at which half the cells survived freezing injury by 8 °C (LT50 =-20 °C), and reduced tissue permeability by 70-fold compared with non-acclimated epidermal cells. These effects were associated with greater activity of pectin methylesterase (PME) and a reduction in the methyl esterification of homogalacturonan. Non-acclimated plants treated with 50 mM CaCl2 accumulated higher concentrations of galacturonic acid, Ca2+ in the cell wall, and a lower number of visible cell wall pores compared with that observed in cold acclimated plants. Using cryo-microscopy, we observed that 50 mM CaCl2 treatment did not lower the LT50 of non-acclimated cells, but reduced the lethal intracellular ice nucleation to temperatures observed in cold acclimated epidermal cells. We postulate that the PME-homogalacturonan-mediated reduction in cell wall porosity is integral to intracellular freezing avoidance strategies in cold acclimated herbaceous cells.

Atomically Dispersed Fe-Co Bimetallic Catalysts for the Promoted Electroreduction of Carbon Dioxide.

The electroreduction reaction of CO2 (ECO2RR) requires high-performance catalysts to convert CO2 into useful chemicals. Transition metal-based atomically dispersed catalysts are promising for the high selectivity and activity in ECO2RR. This work presents a series of atomically dispersed Co, Fe bimetallic catalysts by carbonizing the Fe-introduced Co-zeolitic-imidazolate-framework (C-Fe-Co-ZIF) for the syngas generation from ECO2RR. The synergistic effect of the bimetallic catalyst promotes CO production. Compared to the pure C-Co-ZIF, C-Fe-Co-ZIF facilitates CO production with a CO Faradaic efficiency (FE) boost of 10%, with optimal FECO of 51.9%, FEH2 of 42.4% at - 0.55 V, and CO current density of 8.0 mA cm-2 at - 0.7 V versus reversible hydrogen electrode (RHE). The H2/CO ratio is tunable from 0.8 to 4.2 in a wide potential window of - 0.35 to - 0.8 V versus RHE. The total FECO+H2 maintains as high as 93% over 10 h. The proper adding amount of Fe could increase the number of active sites and create mild distortions for the nanoscopic environments of Co and Fe, which is essential for the enhancement of the CO production in ECO2RR. The positive impacts of Cu-Co and Ni-Co bimetallic catalysts demonstrate the versatility and potential application of the bimetallic strategy for ECO2RR.

Protein-biomolecule interactions play a major role in shaping corona proteome: studies on milk interacted dietary particles.

Despite the significance of surface absorbed proteins in determining the biological identity of nanoparticles (NPs) entering the human body, little is known about the surface corona and factors that shape their formation on dietary particles used as food additives. In this study, food grade NPs of silica and titania and their food additive counterparts (E551 and E171) were interacted with milk proteins or with skimmed milk and the levels of protein adsorption were quantified. Characteristics of proteins correlating with their level of adsorption to NPs were determined using partial least squares regression analysis. Results from individual protein-particle interactions revealed the significance of factors such as zeta potential, hydrophobicity and hydrodynamic size of particles, and protein characteristics such as the number of beta strands, isoelectric points, the number of amino acid units (Ile, Tyr, Ala, Gly, Pro, Asp, and Arg), and phosphorylation sites on their adsorption to particles. Similar regression analysis was performed to identify the characteristics of twenty abundant and enriched proteins (identified using LC-MS/MS analysis) for their association with the surface corona of milk-interacted particles. Contrary to individual protein-particle interactions, protein characteristics such as helices, turns, protein structures, disulfide bonds, the number of amino acid units (Cys, Met, Leu, and Trp), and Fe binding sites were significant for their association with the surface corona of milk interacted particles. This difference in factors identified from individual proteins and milk interacted particles suggested possible interactions of proteins with surface adsorbed biomolecules as revealed by scanning transmission X-ray microscopy and other biochemical assays.

Relative proportions of organic carbon functional groups in biochars as influenced by spectral data collection and processing.

Solid-state 13C Nuclear Magnetic Resonance (NMR) and synchrotron-based X-ray Absorption Near-Edge Structure (XANES) have applications for determining the relative proportions of organic C functional groups in materials. Spectral data obtained by NMR is typically processed using integration (INTEG) whereas XANES spectral data is typically processed using deconvolution (DECONV). The objective of this study was to examine the impact of spectral data collection and processing on the estimated relative proportions of organic C functional groups in biochars. Biochars showed large variations in aromatic C (45-97%), alkyl C (0-23%), O-alkyl C (1-41%), phenolic C (0-20%) and carboxylic C (0-20%). NMR had a better ability than XANES to differentiate % aromatic C across biochars, and the mean % aromatic C was always greater for NMR-INTEG and NMR-DECONV than for XANES-INTEG or XANES-DECONV. NMR-INTEG showed significant associations with NMR-DECONV and XANES-INTEG for % aromatic C and alkyl C, but there were no significant associations between NMR and XANES for % O-alkyl C, phenolic C and carboxylic C. As well, there was no association between NMR-INTEG and XANES-DECONV for any organic C functional group, and in some cases, spectral data collection and processing influenced the quantification of organic C functional groups in a given biochar to the extent that the differences observed were as large as differences observed between biochars when analyzed using the same spectral data collection and processing technique. We conclude that great caution must be taken when comparing studies that determined organic C functional groups in materials using NMR-INTEG versus XANES-DECONV.

Role of secondary minerals in the acid generating potential of weathered mine tailings: Crystal-chemistry characterization and closed mine site management involvement.

Mine tailings exposed to water and oxygen generate acid mine drainage (AMD) when the neutralizing minerals are insufficient to buffer the acid produced by sulfide oxidation. Mineral reactivity, such as sulfide oxidation and carbonate dissolution, leads to several changes within mine tailings in terms of their physical, mineralogical, and geochemical properties, which may lead to the release of metal(oid)s (e.g., As, Cu, Zn, Fe, S) into the environment. Fresh and oxidized tailings were sampled at two vertical profiles in a tailings storage facility (TSF). The TSF contains tailings from gold ore processing at a mine that has been closed for more than 25 years. Oxidized tailings have formed by in-situ oxidation of fresh tailings over more than 20 years. The collected samples were analyzed for: i) chemical composition by inductively coupled plasma atomic emission spectroscopy (ICP-AES), X-ray fluorescence (XRF), and total S/C; and ii) mineralogical composition by X-ray diffraction (XRD), Mineral Liberation Analyzer (MLA), Mossbauer spectroscopy, and Fe L-edge X-ray absorption near-edge spectroscopy (XANES). Mineralogically, the fresh tailings included more than 22 wt% carbonates and more than 10 wt% sulfides. In contrast, the oxidized tailings were composed mainly of secondary minerals such as iron oxy-hydroxides and gypsum. Geochemically, the fresh tailings exhibited a circumneutral behavior during weathering cell experiments and contaminants such as As were negligibly released (<0.3 mg/L). The latter is explained by formation of secondary iron oxy-hydroxides, which are known for the capacity to uptake several contaminants from the leachate. Long term oxidation of fresh tailings will lead to highly oxidized tailings similar to those collected in situ. The oxidized tailings exhibited an acidic behavior despite sulfide depletion due to latent acidity. The geochemical behavior was strongly controlled by the reactivity of secondary minerals (e.g., dissolution of gypsum and iron oxy-hydroxides). Quantitatively, the oxidized tailings released 163 mg/kg Fe, around 12,000 mg/kg S, and around 6 mg/kg Zn.

Sodium adsorption by reusable zeolite adsorbents: integrated adsorption cycles for salinised groundwater treatment.

Using Canadian (CMZ), Bear River (BRZ), and St. Cloud (SCZ) zeolites, this study investigates the application of natural and pre-treated zeolites for Na+ removal from salinised groundwater. Natural BRZ achieved better Na+ removal for initial concentrations of 250-10,000 mg Na+/L and had the highest maximum adsorption capacity (14.3 ± 0.4 mg/g) compared to natural CMZ (5.8 ± 0.5 mg/g) and SCZ (5.6 ± 0.7 mg/g). Natural BRZ exhibited a higher cation exchange capacity (CEC), mineralogical purity, and natural abundance of exchangeable calcium. The natural abundance of Na+ on CMZ and SCZ may have reduced Na+ adsorption. H-form BRZ and H-form CMZ were also prepared through conventional acidic pre-treatment. Acid treatment improved zeolite properties for adsorption (surface area and CEC). Synchrotron-based X-ray scanning transmission microscopy (STXM) indicated that Na+ adsorption sites in the H-form zeolites were associated with the mineral framework. However, sorption effluents were highly acidic (pH ∼2) and Al3+ leached significantly due to the dealumination induced by acid treatment. Alternatively, hard water softening was cyclically integrated with sodium adsorption as a zeolite treatment to generate Ca/Mg-form CMZ. This integration suggested the feasibility of combining CMZ cycles for water softening and sodium reduction for an extended CMZ lifecycle. Natural CMZ was first used to treat hard water, which enriched the CMZ with Ca2+ and Mg2+ and increased its subsequent Na+ removal rate by over 77%, without producing acidic effluents. The Canadian zeolite adsorbed more sodium when water softening was integrated with sodium removal, which is a repeatable dual-treatment.

Sequential Ammonia and Carbon Dioxide Adsorption on Pyrolyzed Biomass to Recover Waste Stream Nutrients.

The amine-rich surfaces of pyrolyzed human solid waste (py-HSW) can be "primed" or "regenerated" with carbon dioxide (CO2) to enhance their adsorption of ammonia (NH3) for use as a soil amendment. To better understand the mechanism by which CO2 exposure facilitates NH3 adsorption to py-HSW, we artificially enriched a model sorbent, pyrolyzed, oxidized wood (py-ox wood) with amine functional groups through exposure to NH3. We then exposed these N-enriched materials to CO2 and then resorbed NH3. The high heat of CO2 adsorption (Q st) on py-HSW, 49 kJ mol-1, at low surface coverage, 0.4 mmol CO2 g-1, showed that the naturally occurring N compounds in py-HSW have a high affinity for CO2. The Q st of CO2 on py-ox wood also increased after exposure to NH3, reaching 50 kJ mol-1 at 0.7 mmol CO2 g-1, demonstrating that the incorporation of N-rich functional groups by NH3 adsorption is favorable for CO2 uptake. Adsorption kinetics of py-ox wood revealed continued, albeit diminishing NH3 uptake after each CO2 treatment, averaging 5.9 mmol NH3 g-1 for the first NH3 exposure event and 3.5 and 2.9 mmol NH3 g-1 for the second and third; the electrophilic character of CO2 serves as a Lewis acid, enhancing surface affinity for NH3 uptake. Furthermore, penetration of 15NH3 and 13CO2 measured by NanoSIMS reached over 7 µm deep into both materials, explaining the large NH3 capture. We expected similar NH3 uptake in py-HSW sorbed with CO2 and py-ox wood because both materials, py-HSW and py-ox wood sorbed with NH3, had similar N contents and similarly high CO2 uptake. Yet NH3 sorption in py-HSW was unexpectedly low, apparently from potassium (K) bicarbonate precipitation, reducing interactions between NH3 and sorbed CO2; 2-fold greater surface K in py-HSW was detected after exposure to CO2 and NH3 than before gas exposure. We show that amine-rich pyrolyzed waste materials have high CO2 affinity, which facilitates NH3 uptake. However, high ash contents as found in py-HSW hinder this mechanism.

Nitrogen speciation and transformations in fire-derived organic matter.

Vegetation fires are known to have broad geochemical effects on carbon (C) cycles in the Earth system, yet limited information is available for nitrogen (N). In this study, we evaluated how charring organic matter (OM) to pyrogenic OM (PyOM) altered the N molecular structure and affected subsequent C and N mineralization. Nitrogen near-edge X-ray absorption fine structure (NEXAFS) of uncharred OM, PyOM, PyOM toluene extract, and PyOM after toluene extraction were used to predict PyOM-C and -N mineralization potentials. PyOM was produced from three different plants (e.g. Maize-Zea mays L.; Ryegrass-Lollium perenne L.; and Willow-Salix viminalix L.) each with varying initial N contents at three pyrolysis temperatures (350, 500 and 700 °C). Mineralization of C and N was measured from incubations of uncharred OM and PyOM in a sand matrix for 256 days at 30 °C. As pyrolysis temperature increased from 350 to 700 °C, aromatic C[bond, double bond]N in 6-membered rings (putative) increased threefold. Aromatic C[bond, double bond]N in 6-membered oxygenated ring increased sevenfold, and quaternary aromatic N doubled. Initial uncharred OM-N content was positively correlated with the proportion of heterocyclic aromatic N in PyOM (R2 = 0.44; P < 0.0001; n = 42). A 55% increase of aromatic N heterocycles at high OM-N content, when compared to low OM-N content, suggests that higher concentrations of N favor the incorporation of N atoms into aromatic structures by overcoming the energy barrier associated with the electronic and atomic configuration of the C structure. A ten-fold increase of aromatic C[bond, double bond]N in 6-membered rings (putative) in PyOM (as proportion of all PyOM-N) decreased C mineralization by 87%, whereas total N contents and C:N ratios of PyOM had no effects on C mineralization of PyOM-C for both pyrolysis temperatures (for PyOM-350 °C, R2 = 0.15; P < 0.27; for PyOM-700 °C, R2 = 0.22; P < 0.21). Oxidized aromatic N in PyOM toluene extracts correlated with higher C mineralization, whereas aromatic N in 6-membered heterocycles correlated with reduced C mineralization (R2 = 0.56; P = 0.001; n = 100). Similarly, aromatic N in 6-membered heterocycles in PyOM remaining after toluene extraction reduced PyOM-C mineralization (R2 = 0.49; P = 0.0006; n = 100). PyOM-C mineralization increased when N atoms were located at the edge of the C network in the form of oxidized N functionalities or when more N was found in PyOM toluene extracts and was more accessible to microbial oxidation. These results confirm the hypothesis that C persistence of fire-derived OM is significantly affected by its molecular N structure and the presented quantitative structure-activity relationship can be utilized for predictive modeling purposes.

Metatranscriptomic Insights Into the Response of River Biofilm Communities to Ionic and Nano-Zinc Oxide Exposures.

Manufactured Zn oxide nanoparticle (ZnO-NP) are extensively used world-wide in personal care and industrial products and are important contaminants of aquatic environments. To understand the overall impact of ZnO-NP contamination on aquatic ecosystems, investigation of their toxicity on aquatic biofilms is of particular consequence, given biofilms are known sinks for NP contaminants. In order to assess alterations in the functional activity of river microbial biofilm communities as a result of environmentally-relevant ZnO-NP exposure, biofilms were exposed to ionic zinc salt or ZnOPs that were uncoated (hydrophilic), coated with silane (hydrophobic) or stearic acid (lipophilic), at a total concentration of 188 µg l-1 Zn. ICP-MS analyses of biofilms indicated ZnO-NP concentrated in the biofilms, with hydrophilic, hydrophobic, and lipophilic treatments reaching 0.310, 0.250, and 0.220 µg Zn cm-2 of biofilm, respectively, while scanning transmission X-ray microspectroscopy (STXM) analyses of biofilms confirmed that Zn was extensively- and differentially-sorbed to biofilm material. Microbial community composition, based on taxonomic affiliation of mRNA sequences and enumeration of protozoa and micrometazoa, was not affected by these treatments, and the total transcriptional response of biofilms to all experimental exposures was not indicative of a global toxic-response, as cellular processes involved in general cell maintenance and housekeeping were abundantly transcribed. Transcripts related to major biological processes, including photosynthesis, energy metabolism, nitrogen metabolism, lipid metabolism, membrane transport, antibiotic resistance and xenobiotic degradation, were differentially expressed in Zn-exposures relative to controls. Notably, transcripts involved in nitrogen fixation and photosynthesis were decreased in abundance in response to Zn-exposure, while transcripts related to lipid degradation and motility-chemotaxis were increased, suggesting a potential role of Zn in biofilm dissolution. ZnO-NP and ionic Zn exposures elicited generally overlapping transcriptional responses, however hydrophilic and hydrophobic ZnO-NPs induced a more distinct effect than that of lipophilic ZnO-NPs, which had an effect similar to that of low ionic Zn exposure. While the physical coating of ZnO-NP may not induce specific toxicity observable at a community level, alteration of ecologically important processes of photosynthesis and nitrogen cycling are an important potential consequence of exposure to ionic Zn and Zn oxides.

Microscale and molecular analyses of river biofilm communities treated with microgram levels of cerium oxide nanoparticles indicate limited but significant effects.

Cerium oxide (CeO2) nanoparticles are used as in-fuel catalysts and in manufacturing processes, creating a potential for release to aquatic environments. Exposures at 1 and 10 µg/L CeO2-nanoparticles were made to assess effects during the development of river biofilm communities. Scanning transmission x-ray microscopy (STXM) indicated extensive sorption of nanoparticles to the community and co-localization with lipid moieties. Following 8 weeks of development, polycarbonate coupons were removed from the reactors and used for molecular analyses, denaturing gradient gel electrophoresis analysis (DGGE-16S rRNA) and 16S rRNA amplicon sequencing. Microscopic imaging of the biofilm communities (bacterial, photosynthetic biomass, exopolymer composition, thickness, protozoan numbers), as well as carbon substrate utilization fingerprinting was performed. There was a trend toward reduced photosynthetic biomass, but no significant effects of CeO2 exposure were found on photosynthetic and bacterial biomass or biofilm thickness. Sole carbon source utilization analyses indicated increased utilization of 10 carbon sources in the carbohydrate, carboxylic acid and amino acids categories related to CeO2 exposures; however, predominantly, no significant effects (p < 0.05) were detected. Measures of microbial diversity, lectin binding affinities of exopolymeric substances and results of DGGE analyses, indicated significant changes to community composition (p < 0.05) with CeO2 exposure. Increased binding of the lectin Canavalia ensiformis was observed, consistent with changes in bacterial-associated polymers. Whereas, no significant changes were observed in binding to residues associated with algal and cyanobacterial exopolymers. 16S rRNA amplicon sequencing of community DNA indicated changes in diversity and shifts in community composition; however, these did not trend with increasing CeO2 exposure. Counting of protozoans in the biofilm communities indicated no significant effects on this trophic level. Thus, based on biomass and functional measures, CeO2 nanoparticles did not appear to have significant effects; however, there was evidence of selection pressure resulting in significant changes in microbial community composition.

Examining a synchrotron-based approach for in situ analyses of Al speciation in plant roots.

Aluminium (Al) K- and L-edge X-ray absorption near-edge structure (XANES) has been used to examine Al speciation in minerals but it remains unclear whether it is suitable for in situ analyses of Al speciation within plants. The XANES analyses for nine standard compounds and root tissues from soybean (Glycine max), buckwheat (Fagopyrum tataricum), and Arabidopsis (Arabidopsis thaliana) were conducted in situ. It was found that K-edge XANES is suitable for differentiating between tetrahedral coordination (peak of 1566 eV) and octahedral coordination (peak of 1568 to 1571 eV) Al, but not suitable for separating Al binding to some of the common physiologically relevant compounds in plant tissues. The Al L-edge XANES, which is more sensitive to changes in the chemical environment, was then examined. However, the poorer detection limit for analyses prevented differentiation of the Al forms in the plant tissues because of their comparatively low Al concentration. Where forms of Al differ markedly, K-edge analyses are likely to be of value for the examination of Al speciation in plant tissues. However, the apparent inability of Al K-edge XANES to differentiate between some of the physiologically relevant forms of Al may potentially limit its application within plant tissues, as does the poorer sensitivity at the L-edge.

Integumentary structure and composition in an exceptionally well-preserved hadrosaur (Dinosauria: Ornithischia).

Preserved labile tissues (e.g., skin, muscle) in the fossil record of terrestrial vertebrates are increasingly becoming recognized as an important source of biological and taphonomic information. Here, we combine a variety of synchrotron radiation techniques with scanning electron and optical microscopy to elucidate the structure of 72 million-year-old squamous (scaly) skin from a hadrosaurid dinosaur from the Late Cretaceous of Alberta, Canada. Scanning electron and optical microscopy independently reveal that the three-dimensionally preserved scales are associated with a band of carbon-rich layers up to a total thickness of ∼75 microns, which is topographically and morphologically congruent with the stratum corneum in modern reptiles. Compositionally, this band deviates from that of the surrounding sedimentary matrix; Fourier-transform infrared spectroscopy and soft X-ray spectromicroscopy analyses indicate that carbon appears predominantly as carbonyl in the skin. The regions corresponding to the integumentary layers are distinctively enriched in iron compared to the sedimentary matrix and appear with kaolinite-rich laminae. These hosting carbonyl-rich layers are apparently composed of subcircular bodies resembling preserved cell structures. Each of these structures is encapsulated by calcite/vaterite, with iron predominantly concentrated at its center. The presence of iron, calcite/vaterite and kaolinite may, independently or collectively, have played important roles in the preservation of the layered structures.

Porous metal-metalloporphyrin gel as catalytic binding pocket for highly efficient synergistic catalysis.

Synergistic catalysis occurring in an enzyme pocket shows enhanced performance through supramolecular recognition and flexibility. This study presents an aerogel capable of similar function by fabricating a gel catalyst with hierarchical porosity. Here, the as-prepared Co-MMPG, a Co(II) metal-metalloporphyrin gel, maintains enough conformational flexibility and features a binding pocket formed from the co-facial arrangement of the porphyrin rings, as elucidated through the combined studies of solid-state NMR and X-ray absorption near-edge structure (XANES). The cooperativity between two Co(II) sites within the defined nanospace pocket facilitates the binding of different substrates with a favourable geometry thereby rendering Co-MMPG with excellent performance in the context of synergistic catalysis, especially for the kinetic control stereoselective reactions. Our work thus contributes a different enzyme-mimic design strategy to develop a highly efficient heterogeneous catalyst with high chemo/stereo selectivity.

Fire-derived organic matter retains ammonia through covalent bond formation.

Fire-derived organic matter, often referred to as pyrogenic organic matter (PyOM), is present in the Earth's soil, sediment, atmosphere, and water. We investigated interactions of PyOM with ammonia (NH3) gas, which makes up much of the Earth's reactive nitrogen (N) pool. Here we show that PyOM's NH3 retention capacity under ambient conditions can exceed 180 mg N g-1 PyOM-carbon, resulting in a material with a higher N content than any unprocessed plant material and most animal manures. As PyOM is weathered, NH3 retention increases sixfold, with more than half of the N retained through chemisorption rather than physisorption. Near-edge X-ray absorption fine structure and nuclear magnetic resonance spectroscopy reveal that a variety of covalent bonds form between NH3-N and PyOM, more than 10% of which contained heterocyclic structures. We estimate that through these mechanisms soil PyOM stocks could retain more than 600-fold annual NH3 emissions from agriculture, exerting an important control on global N cycling.

Sub-micron level investigation reveals the inaccessibility of stabilized carbon in soil microaggregates.

Direct evidence-based approaches are vital to evaluating newly proposed theories on the persistence of soil organic carbon and establishing the contributions of abiotic and biotic controls. Our primary goal was to directly identify the mechanisms of organic carbon stabilization in native-state, free soil microaggregates without disrupting the aggregate microstructure using scanning transmission x-ray microscopy coupled with near edge x-ray absorption fine structure spectroscopy (STXM-NEXAFS). The influence of soil management practices on microaggregate associated-carbon was also assessed. Free, stable soil microaggregates were collected from a tropical agro-ecosystem in Cruz Alta, Brazil. The long-term experimental plots (>25 years) comparing two tillage systems: no-till and till with a complex crop rotation. Based on simultaneously collected multi-elemental associations and speciation, STXM-NEXAFS successfully provided submicron level information on organo-mineral associations. Simple organic carbon sources were found preserved within microaggregates; some still possessing original morphology, suggesting that their stabilization was not entirely governed by the substrate chemistry. Bulk analysis showed higher and younger organic carbon in microaggregates from no-till systems than tilled systems. These results provide direct submicron level evidence that the surrounding environment is involved in stabilizing organic carbon, thus favoring newly proposed concepts on the persistence of soil organic carbon.

A recyclable adsorbent for salinized groundwater: Dual-adsorbent desalination and potassium-exchanged zeolite production.

This study focused on advancing the dual-adsorbent desalination technique that sequentially combines calcined layered double hydroxide (CLDH) and acid-treated zeolites (H-form zeolite) using groundwater spiked with potash mining effluent (brine). In sequential batch experiments, the CLDH adsorbent first reduced the high Cl- concentration (4600 mg/L) of saline groundwater by 96%, the Ca2+ by 90%, and the Mg2+ by 92%, while transiently raising the pH to 12.80. H-form zeolites preconditioned with Na+ then removed 92% of the Na+ (2010 mg/L), while neutralizing the adsorption effluent pH to 7.7 and lowering the sodium adsorption ratio (SAR; 139.6 to 6.6) and the hardness (574 to 48.4 mg/L). In comparison, an equivalent amount of unmodified zeolite removed only 51% of the Na+ and generated extremely hard water due to Ca2+ and Mg2+ release (1519 mg/L). Na+-conditioning the zeolites prior to acid treatment enhances native cation removal, forming H-form zeolites. Synchrotron-based X-ray scanning transmission microscopy (STXM) showed the occurrence of dealumination and visualized the sodium distribution associated with Si and Al sites in the H-form zeolites. Four consecutive desalination cycles were feasible for Na+ and K+ adsorption by regenerating the H-form zeolite. During regeneration, the Na+ desorbed while the K+ remained in the regenerated zeolites. Cumulative K+ loading in the regenerated zeolites increased from 4.8 to 21.2 mg/g, producing K-form zeolites. These K-form zeolites released K+ (2.15 mg/L for 24 h) in a leaching test and could potentially be considered as nutrient-supply media in other applications, thereby recycling the spent zeolites after multiple desalination treatments.

Theory-driven design of high-valence metal sites for water oxidation confirmed using in situ soft X-ray absorption.

The efficiency with which renewable fuels and feedstocks are synthesized from electrical sources is limited at present by the sluggish oxygen evolution reaction (OER) in pH-neutral media. We took the view that generating transition-metal sites with high valence at low applied bias should improve the activity of neutral OER catalysts. Here, using density functional theory, we find that the formation energy of desired Ni4+ sites is systematically modulated by incorporating judicious combinations of Co, Fe and non-metal P. We therefore synthesized NiCoFeP oxyhydroxides and probed their oxidation kinetics with in situ soft X-ray absorption spectroscopy (sXAS). In situ sXAS studies of neutral-pH OER catalysts indicate ready promotion of Ni4+ under low overpotential conditions. The NiCoFeP catalyst outperforms IrO2 and retains its performance following 100 h of operation. We showcase NiCoFeP in a membrane-free CO2 electroreduction system that achieves a 1.99 V cell voltage at 10 mA cm-2, reducing CO2 into CO and oxidizing H2O to O2 with a 64% electricity-to-chemical-fuel efficiency.

Importance of the RpoE Regulon in Maintaining the Lipid Bilayer during Antimicrobial Treatment with the Polycationic Agent, Chlorhexidine.

The emergence of multidrug resistance in bacteria has reached alarming levels. To solve this growing problem, discovery of novel cellular targets or pathways important for antimicrobial resistance is urgently needed. In this study, we explored how the alternative sigma factor, RpoE, protects Escherichia coli O157 against the toxic effects of the polycationic antimicrobial agent, chlorhexidine (CHX). Susceptibility of this organism to CHX was found to directly correlate to the growth rate, with the faster replicating wild-type being more susceptible to CHX than its more slowly replicating ΔrpoE O157 mutant. Once the wild-type and rpoE mutant strains had undergone growth arrest (entered the stationary growth phase), their resistance to CHX became entirely dependent on the functionality of RpoE. The RpoE regulon plays a critical role in maintaining the integrity of the asymmetric lipid bilayer of E. coli, thereby preventing the intracellular accumulation of CHX. Finally, using a single-cell, high-resolution, synchrotron-based approach, we discovered a subpopulation of the rpoE mutant strain with no detectable intracellular CHX, a predominant characteristic of the wild-type CHX-resistant population. This finding reveals a role of phenotypic heterogeneity in antimicrobial resistance.

Transition from antiferromagnetic ground state to robust ferrimagnetic order with Curie temperatures above 420 K in manganese-based antiperovskite-type structures.

Manganese (Mn)-based antiperovskite structures (Mn3AX, where A and X represent the 3d transition-metal elements and N or C atoms, respectively) have attracted growing attention because of their novel electronic and magnetic properties. However, the lack of an effective approach to regulate the magnetic coupling in Mn3AX crystal structure, particularly in antiferromagnetic ground states, hinders their further design and applications. Herein, robust high-temperature ferrimagnetic order with a Curie temperature ( T C ) in the range of ~390-420 K was successfully achieved in M n 3 G a x N x ( x = 0.5 , 0.6, and 0.7) via composition-deficient engineering. A systematic investigation, including synchrotron X-ray diffraction, neutron powder diffraction, pair distribution function, X-ray absorption near-edge structure, magnetic characterization, and first-principles calculations, convincingly indicated that the redistribution of partial atoms in the antiferromagnetic ground state was responsible for the observed long-range magnetic order. These results not only provide a new perspective into the design and construction of high-temperature ferrimagnets based on the Mn3AX structure, but also open up a promising avenue for the further design of Mn3AX-based spintronic or other multifunctional devices.