Elucidating Local Structure and Positional Effect of Dopants in Colloidal Transition Metal Dichalcogenide Nanosheets for Catalytic Hydrogenolysis.

Tailoring nanoscale catalysts to targeted applications is a vital component in reducing the carbon footprint of industrial processes; however, understanding and controlling the nanostructure influence on catalysts is challenging. Molybdenum disulfide (MoS2), a transition metal dichalcogenide (TMD) material, is a popular example of a nonplatinum-group-metal catalyst with tunable nanoscale properties. Doping with transition metal atoms, such as cobalt, is one method of enhancing its catalytic properties. However, the location and influence of dopant atoms on catalyst behavior are poorly understood. To investigate this knowledge gap, we studied the influence of Co dopants in MoS2 nanosheets on catalytic hydrodesulfurization (HDS) through a well-controlled, ligand-directed, tunable colloidal doping approach. X-ray absorption spectroscopy and density functional theory calculations revealed the nonmonotonous relationship between dopant concentration, location, and activity in HDS. Catalyst activity peaked at 21% Co:Mo as Co saturates the edge sites and begins basal plane doping. While Co prefers to dope the edges over basal sites, basal Co atoms are demonstrably more catalytically active than edge Co. These findings provide insight into the hydrogenolysis behavior of doped TMDs and can be extended to other TMD materials.

Retraction of "Hydrogenolysis of Polyethylene and Polypropylene into Propane over Cobalt-Based Catalysts".

[This retracts the article DOI: 10.1021/jacsau.2c00402.].

Coupled Experimental-Theoretical Characterization of a Carbon Electrode in Vanadium Redox Flow Batteries using X-ray Absorption Spectroscopy.

Vanadium redox flow batteries (VRFBs) have emerged as promising solutions for stationary grid energy storage due to their high efficiency, scalability, safety, near room-temperature operation conditions, and the ability to independently size power and energy capacities. The performance of VRFBs heavily relies on the redox couple reactions of V2+/V3+ and VO2+/VO2+ on carbon electrodes. Therefore, a thorough understanding of the surface functionality of carbon electrodes and their propensity for degradation during electrochemical cycles is crucial for designing VRFBs with extended lifespans. In this study, we present a coupled experimental-theoretical approach based on carbon K edge X-ray absorption spectroscopy (XAS) to characterize carbon electrodes prepared under different conditions and identify relevant functional groups that contribute to unique spectroscopic features. Atomic models were created to represent functional groups, such as hydroxyl, carboxyl, methyl, and aldehyde, bonded to carbon atoms in either sp2 or sp3 environments. The interactions between functionalized carbon and various solvated vanadium complexes were modeled using density functional theory. A library of carbon K-edge XAS spectra was generated for distinct carbon atoms in different functional groups, both before and after interacting with solvated vanadium complexes. We demonstrate how these simulated spectra can be used to deconvolve ex situ experimental spectra measured from carbon electrodes and to track changes in the electrode composition following immersion in different electrolytes or extended cycling within a functional VRFB. By doing so, we identify the active species present on the carbon electrodes, which play a crucial role in determining their electrochemical performance.

Selective Catalytic Behavior Induced by Crystal-Phase Transformation in Well-Defined Bimetallic Pt-Sn Nanocrystals.

The Pt-Sn bimetallic system is a much studied and commercially used catalyst for propane dehydrogenation. The traditionally prepared catalyst, however, suffers from inhomogeneity and phase separation of the active Pt-Sn phase. Colloidal chemistry offers a route for the synthesis of Pt-Sn bimetallic nanoparticles (NPs) in a systematic, well-defined, tailored fashion over conventional methods. Here, the successful synthesis of well-defined ≈2 nm Pt, PtSn, and Pt3 Sn nanocrystals with distinct crystallographic phases is reported; hexagonal close packing (hcp) PtSn and fcc Pt3 Sn show different activity and stability depending on the hydrogen-rich or poor environment in the feed. Moreover, face centred cubic (fcc) Pt3 Sn/Al2 O3 , which exhibited the highest stability compared to hcp PtSn, shows a unique phase transformation from an fcc phase to an L12 -ordered superlattice. Contrary to PtSn, H2 cofeeding has no effect on the Pt3 Sn deactivation rate. The results reveal structural dependency of the probe reaction, propane dehydrogenation, and provide a fundamental understanding of the structure-performance relationship on emerging bimetallic systems.

Hydrogenolysis of Polyethylene and Polypropylene into Propane over Cobalt-Based Catalysts.

The development of technologies to recycle polyethylene (PE) and polypropylene (PP), globally the two most produced polymers, is critical to increase plastic circularity. Here, we show that 5 wt % cobalt supported on ZSM-5 zeolite catalyzes the solvent-free hydrogenolysis of PE and PP into propane with weight-based selectivity in the gas phase over 80 wt % after 20 h at 523 K and 40 bar H2. This catalyst significantly reduces the formation of undesired CH4 (≤5 wt %), a product which is favored when using bulk cobalt oxide or cobalt nanoparticles supported on other carriers (selectivity ≤95 wt %). The superior performance of Co/ZSM-5 is attributed to the stabilization of dispersed oxidic cobalt nanoparticles by the zeolite support, preventing further reduction to metallic species that appear to catalyze CH4 generation. While ZSM-5 is also active for propane formation at 523 K, the presence of Co promotes stability and selectivity. After optimizing the metal loading, it was demonstrated that 10 wt % Co/ZSM-5 can selectively catalyze the hydrogenolysis of low-density PE (LDPE), mixtures of LDPE and PP, as well as postconsumer PE, showcasing the effectiveness of this technology to upcycle realistic plastic waste. Cobalt supported on zeolites FAU, MOR, and BEA were also effective catalysts for C2-C4 hydrocarbon formation and revealed that the framework topology provides a handle to tune gas-phase selectivity.

Reconciling structure prediction of alloyed, ultrathin nanowires with spectroscopy.

A number of complementary, synergistic advances are reported herein. First, we describe the 'first-time' synthesis of ultrathin Ru2Co1 nanowires (NWs) possessing average diameters of 2.3 ± 0.5 nm using a modified surfactant-mediated protocol. Second, we utilize a combination of quantitative EDS, EDS mapping (along with accompanying line-scan profiles), and EXAFS spectroscopy results to probe the local atomic structure of not only novel Ru2Co1 NWs but also 'control' samples of analogous ultrathin Ru1Pt1, Au1Ag1, Pd1Pt1, and Pd1Pt9 NWs. We demonstrate that ultrathin NWs possess an atomic-level geometry that is fundamentally dependent upon their intrinsic chemical composition. In the case of the PdPt NW series, EDS mapping data are consistent with the formation of a homogeneous alloy, a finding further corroborated by EXAFS analysis. By contrast, EXAFS analysis results for both Ru1Pt1 and Ru2Co1 imply the generation of homophilic structures in which there is a strong tendency for the clustering of 'like' atoms; associated EDS results for Ru1Pt1 convey the same conclusion, namely the production of a heterogeneous structure. Conversely, EDS mapping data for Ru2Co1 suggests a uniform distribution of both elements. In the singular case of Au1Ag1, EDS mapping results are suggestive of a homogeneous alloy, whereas EXAFS analysis pointed to Ag segregation at the surface and an Au-rich core, within the context of a core-shell structure. These cumulative outcomes indicate that only a combined consideration of both EDS and EXAFS results can provide for an accurate representation of the local atomic structure of ultrathin NW motifs.

Capture and Decomposition of the Nerve Agent Simulant, DMCP, Using the Zeolitic Imidazolate Framework (ZIF-8).

Understanding mechanisms of decontamination of chemical warfare agents (CWA) is an area of intense research aimed at developing new filtration materials to protect soldiers and civilians in case of state-sponsored or terrorist attack. In this study, we employed complementary structural, chemical, and dynamic probes and in situ data collection, to elucidate the complex chemistry, capture, and decomposition of the CWA simulant, dimethyl chlorophosphonate (DMCP). Our work reveals key details of the reactive adsorption of DMCP and demonstrates the versatility of zeolitic imidazolate framework (ZIF-8) as a plausible material for CWA capture and decomposition. The in situ synchrotron-based powder X-ray diffraction (PXRD) and pair distribution function (PDF) studies, combined with Fourier transform infrared (FT-IR) spectroscopy, X-ray photoelectron spectroscopy (XPS), zinc K-edge X-ray absorption near edge structure (XANES), and Raman spectroscopies, showed that the unique structure, chemical state, and topology of ZIF-8 enable accessibility, adsorption, and hydrolysis of DMCP into the pores and revealed the importance of linker chemistry and Zn2+ sites for nerve agent decomposition. DMCP decontamination and decomposition product(s) formation were observed by thermogravimetric analysis, FT-IR spectroscopy, and phosphorus (P) K-edge XANES studies. Differential PDF analysis indicated that the average structure of ZIF-8 (at the 30 Å scale) remains unchanged after DMCP dosing and provided information on the dynamics of interactions of DMCP with the ZIF-8 framework. Using in situ PXRD and diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), we showed that nearly 90% regeneration of the ZIF-8 structure and complete liberation of DMCP and decomposition products occur upon heating.

Direct Identification of Mixed-Metal Centers in Metal-Organic Frameworks: Cu3(BTC)2 Transmetalated with Rh2+ Ions.

Raman spectroscopy was used to establish direct evidence of heterometallic metal centers in a metal-organic framework (MOF). The Cu3(BTC)2 MOF HKUST-1 (BTC3- = benzenetricarboxylate) was transmetalated by heating it in a solution of RhCl3 to substitute Rh2+ ions for Cu2+ ions in the dinuclear paddlewheel nodes of the framework. In addition to the Cu-Cu and Rh-Rh stretching modes, Raman spectra of (CuxRh1-x)3(BTC)2 show the Cu-Rh stretching mode, indicating that mixed-metal Cu-Rh nodes are formed after transmetalation. Density functional theory studies confirmed the assignment of a Raman peak at 285 cm-1 to the Cu-Rh stretching vibration. Electron paramagnetic resonance spectroscopy experiments further supported the conclusion that Rh2+ ions are substituted into the paddlewheel nodes of Cu3(BTC)2 to form an isostructural heterometallic MOF, and electron microscopy studies showed that Rh and Cu are homogeneously distributed in (CuxRh1-x)3(BTC)2 on the nanoscale.

Metal-Organic Framework- and Polyoxometalate-Based Sorbents for the Uptake and Destruction of Chemical Warfare Agents.

The threat of chemical warfare agents (CWAs), assured by their ease of synthesis and effectiveness as a terrorizing weapon, will persist long after the once-tremendous stockpiles in the U.S. and elsewhere are finally destroyed. As such, soldier and civilian protection, battlefield decontamination, and environmental remediation from CWAs remain top national security priorities. New chemical approaches for the fast and complete destruction of CWAs have been an active field of research for many decades, and new technologies have generated immense interest. In particular, our research team and others have shown metal-organic frameworks (MOFs) and polyoxometalates (POMs) to be active for sequestering CWAs and even catalyzing the rapid hydrolysis of agents. In this Forum Article, we highlight recent advancements made in the understanding and evaluation of POMs and Zr-based MOFs as CWA decontamination materials. Specifically, our aim is to bridge the gap between controlled, solution-phase laboratory studies and real-world or battlefield-like conditions by examining agent-material interactions at the gas-solid interface utilizing a multimodal experimental and computational approach. Herein, we report our progress in addressing the following research goals: (1) elucidating molecular-level mechanisms of the adsorption, diffusion, and reaction of CWA and CWA simulants within a series of Zr-based MOFs, such as UiO-66, MOF-808, and NU-1000, and POMs, including Cs8Nb6O19 and (Et2NH2)8[(α-PW11O39Zr(µ-OH)(H2O))2]·7H2O, (2) probing the effects that common ambient gases, such as CO2, SO2, and NO2, have on the efficacy of the MOF and POM materials for CWA destruction, and (3) using CWA simulant results to develop hypotheses for live agent chemistry. Key hypotheses are then tested with targeted live agent studies. Overall, our collaborative effort has provided insight into the fundamental aspects of agent-material interactions and revealed strategies for new catalyst development.

Multimodal Characterization of Materials and Decontamination Processes for Chemical Warfare Protection.

This Review summarizes the recent progress made in the field of chemical threat reduction by utilizing new in situ analytical techniques and combinations thereof to study multifunctional materials designed for capture and decomposition of nerve gases and their simulants. The emphasis is on the use of in situ experiments that simulate realistic operating conditions (solid-gas interface, ambient pressures and temperatures, time-resolved measurements) and advanced synchrotron methods, such as in situ X-ray absorption and scattering methods, a combination thereof with other complementary measurements (e.g., XPS, Raman, DRIFTS, NMR), and theoretical modeling. The examples presented in this Review range from studies of the adsorption and decomposition of nerve agents and their simulants on Zr-based metal organic frameworks to Nb and Zr-based polyoxometalates and metal (hydro)oxide materials. The approaches employed in these studies ultimately demonstrate how advanced synchrotron-based in situ X-ray absorption spectroscopy and diffraction can be exploited to develop an atomic- level understanding of interfacial binding and reaction of chemical warfare agents, which impacts the development of novel filtration media and other protective materials.

Selective Catalytic Chemistry at Rhodium(II) Nodes in Bimetallic Metal-Organic Frameworks.

We report the first study of a gas-phase reaction catalyzed by highly dispersed sites at the metal nodes of a crystalline metal-organic framework (MOF). Specifically, CuRhBTC (BTC3- =benzenetricarboxylate) exhibited hydrogenation activity, while other isostructural monometallic and bimetallic MOFs did not. Our multi-technique characterization identifies the oxidation state of Rh in CuRhBTC as +2, which is a Rh oxidation state that has not previously been observed for crystalline MOF metal nodes. These Rh2+ sites are active for the catalytic hydrogenation of propylene to propane at room temperature, and the MOF structure stabilizes the Rh2+ oxidation state under reaction conditions. Density functional theory calculations suggest a mechanism in which hydrogen dissociation and propylene adsorption occur at the Rh2+ sites. The ability to tailor the geometry and ensemble size of the metal nodes in MOFs allows for unprecedented control of the active sites and could lead to significant advances in rational catalyst design.

Electrodeposition of MoSx Hydrogen Evolution Catalysts from Sulfur-Rich Precursors.

Amorphous molybdenum sulfides (a-MoSx) are known to be active electrocatalysts for the hydrogen evolution reaction (HER), but the role stoichiometry of the sulfur atoms plays in the HER activity remains unclear. In this work, we deposited thin films of a-MoSx from two thiomolybdate deposition baths with different sulfur ratios (MoS42- and Mo2S122-) and showed that the sulfur stoichiometry, as determined by X-ray photoelectron spectroscopy, is controlled by the precursor of choice and the electrochemical method used to deposit the thin films. Using the Mo2S122- precursor allows access to a MoS6 thin film, with a higher S/Mo ratio compared with that of any previously reported electrodeposited films. We also examined the effect of electrochemistry on the resulting S/Mo ratio in the as-prepared a-MoSx thin films. Samples with S/Mo ratios ranging from 2 to 6 were electrodeposited on glassy carbon (GC) substrates by using anodic, cathodic, or cyclic voltammetry deposition. The a-MoSx thin films deposited on GC substrates were tested as HER catalysts in acidic electrolytes. The overpotentials needed to drive current densities of 10 mA/cm2 ranged from 160 mV for MoS6 samples to 216 mV for MoS2 samples, signifying the important role sulfur content plays in HER activity of the prepared films. Furthermore, we characterized the deactivation of the a-MoSx films and found that the sulfur content is gradually depleted over time, leading to a slow deactivation of the a-MoSx thin-film catalysts. We showed a facile procedure that affords a-MoSx films with high sulfur content by using S-rich precursors and highlighted the role of sulfur in the prepared films for HER.

Correlated Multimodal Approach Reveals Key Details of Nerve-Agent Decomposition by Single-Site Zr-Based Polyoxometalates.

Development of technologies for protection against chemical warfare agents (CWAs) is critically important. Recently, polyoxometalates have attracted attention as potential catalysts for nerve-agent decomposition. Improvement of their effectiveness in real operating conditions requires an atomic-level understanding of CWA decomposition at the gas-solid interface. We investigated decomposition of the nerve agent Sarin and its simulant, dimethyl chlorophosphate (DMCP), by zirconium polytungstate. Using a multimodal approach, we showed that upon DMCP and Sarin exposure the dimeric tungstate undergoes monomerization, making coordinatively unsaturated Zr(IV) centers available, which activate nucleophilic hydrolysis. Further, DMCP is shown to be a good model system of reduced toxicity for studies of CWA deactivation at the gas-solid interface.

Ce(III) doped Zr-based MOFs as excellent NO2 adsorbents at ambient conditions.

New hybrid cerium modified zirconium based metal-organic frameworks (MOFs) were synthesized. The as-received materials were evaluated as adsorbents of NO2 in either moist or dry conditions. The surface of the initial and exhausted samples was characterized using XRD, SEM-EDX, nitrogen adsorption, thermal analysis, and FTIR. It was found that the addition of Ce(+3) slightly affects the growth of the framework and introduces new features to Zr-MOF. The shapes of the octahedral crystals are changed, and they are interwoven with rod-flake-like sheets. The extent of the interconnection, and thus the extent of the hybrid MOF formation, depends on the Zr to Ce ratio. The alterations in the surface chemistry and texture are reflected in the amount of NO2 adsorbed. The narrow pore channels present in these new materials enhance adsorption in either moist or dry conditions. The amount of NO2 adsorbed on the Ce-doped MOF increases over 25% in dry conditions in comparison with the unmodified MOF. Exposure of Ce-UiO-66 to NO2 results in a development of porosity. Regardless the conditions, the XRD patterns indicate the stability of this new hybrid MOF upon NO2 adsorption. Interactions of NO2 with MOF result in the formation of nitrate and nitrite species associated either with metals or with organic ligands.

Effects of carbon phase deposition in silica gel pores on NO2 reactive adsorption at ambient conditions on carbon/silica composites.

Silica-carbon composite samples containing various carbon contents deposited within a silica gel matrix were synthesized. The composites were evaluated as nitrogen dioxide adsorbents at ambient conditions in either wet (70% RH) or dry air streams. The surface chemistry and textural features of the initial and exposed samples were characterized using nitrogen adsorption, potentiometric titration, thermal analysis, and FT-IR. The deposition of the carbon phase significantly increased the amount of NO2 adsorbed in comparison with that adsorbed on the silica gel. With an increase in the amount of carbon an increase in the performance was found. The positive effect was especially noticed when water was present in the system. An oxidation of the surface and release of NO was observed. The acidification/oxidation of the surface is more pronounced in moist conditions, and it is linked to the formation of nitric acid adsorbed in the pore system. The carbon phase besides providing some level of hydrophobicity also brings phenolic groups to the system, on which immobilization of NO2 takes place via nitrification reactions.

Interactions of NO2 with Zr-based MOF: effects of the size of organic linkers on NO2 adsorption at ambient conditions.

Zirconium-based metal organic framework (Zr-MOF), UiO-66 and UiO-67, were synthesized and used as adsorbents of NO(2) at ambient temperatures in either dry or moist conditions. The samples were characterized before and after exposure to NO(2) by X-ray diffraction, scanning electron microscopy, N(2)-adsorption at 77 K, thermal analysis, and infrared spectroscopy. The results indicate the important effect of a ligand size on the adsorption of NO(2) on Zr-MOF materials. While the large size of the 4,4-benzenebiphenyldicarboxylic acid (BDPC) ligand has a positive impact on the adsorption of NO(2) on UiO-67 in moist conditions, the opposite effect is found in dry conditions. The large pore volume of UiO-67 enhances the adsorption of moisture and formation of nitric and nitrous acids. The small pore sizes of UiO-66 favor the NO(2) removal in dry conditions via dispersive forces. Upon interaction of NO(2) molecules with the Zr-MOF in dry conditions, the bond between the organic linker and metallic oxide center is broken, leading to the formation of nitrate and nitrite species. Moreover, organic ligands also contribute to the NO(2) reactive adsorption via nitration reaction.

Mesoporous silica SBA-15 modified with copper as an efficient NO2 adsorbent at ambient conditions.

Copper oxide particles were synthesized by precipitation in sodium hydroxide and dispersed simultaneously in mesoporous SBA-15 silica. The materials were then submitted to thermal treatment under nitrogen at different temperatures. They were tested as novel NO(2) adsorbents in dynamic condition at room temperature. The surface of the initial and exhausted materials was characterized using N(2) adsorption, XRD, TEM, thermal analysis and FT-IR. The addition of Cu(2)O particles leads to a significant increase in the NO(2) adsorption capacity. However, no trend between the NO(2) capacity and the temperature of the thermal treatment of the materials has been observed. The amount of NO released during the NO(2) adsorption was found to be lower on the materials submitted to a low temperature treatment. On these materials, the formation of copper nitrites is favored, whereas on materials treated at higher temperature, copper nitrates are formed as a predominant species. The results suggest that silanol groups of the silica matrix play an important role in NO(2) adsorption and NO retention at room temperature.

Interactions of NO2 with amine-functionalized SBA-15: effects of synthesis route.

SBA-15 mesoporous silica was modified using (3-aminopropyl)trimethoxysilane (APTMS) following co-condensation or grafting methods and then used as a NO(2) adsorbent at room temperature. The samples were characterized before and after exposure to NO(2) by SEM-EDX, N(2) adsorption at 77 K, potentiometric titration, thermal analysis, and FTIR spectroscopy. Even though, regardless of the synthesis route, the addition of propylamine groups leads to a significant enhancement in the amount of NO(2) adsorbed (from 21 to 124 mg(NO(2))/g), a higher retention of NO(2) and NO (released as a result of surface reactions) was measured on the grafted silica than on all of the co-condensed samples. In the case of the latter materials, improvements in both NO(2) adsorption capacity and NO retention were found for the samples treated with NaOH. This behavior is related to the higher reactivity of deprotonated propylamine groups (formed during NaOH treatment) with NO(2), the presence of silanol groups, and the residual amount of sodium present in the samples. The mechanism of NO(2) adsorption on propylamine groups involves the formation of nitramine and/or nitrosamine. Analysis of the spent materials indicates that the porosity of co-condensed materials is not affected to the same extent by adsorption of NO(2) as that of the grafted silica.

Interactions of NO2 at ambient temperature with cerium-zirconium mixed oxides supported on SBA-15.

New silica-based composites were obtained using a slow precipitation of mixed oxide Ce(1-x)Zr(x)O(2) on the surface of mesoporous silica, SBA-15. The samples were tested as NO(2) adsorbents in dynamic conditions at room temperature. The surface of the initial and exhausted materials was characterized using N(2) sorption, XRD, TEM, potentiometric titration, and thermal analysis before and after exposure to NO(2). In comparison with unsupported Ce(1-x)Zr(x)O(2) mixed oxides, a significant increase in the NO(2) adsorption capacity was observed. This is due to the high dispersion of active oxide phase on the surface of SBA-15. A linear trend was found between the NO(2) adsorption capacity and the amount of Zr(OH)(4) added to the structure. Introduction of Zr(4+) cations to ceria contributes to an increase in the amount of Ce(3+), which is the active center for the NO(2) adsorption, and to an increase in the density of -OH groups. These groups are found to be involved in the retention of both NO(2) and NO on the surface. After exposure to NO(2), an acidification of the surface caused by the oxidation of the cerium as well as the formation of nitrite and nitrates took place. The structure of the composites appears not to be affected by reactive adsorption of NO(2).

Role of Zr4+ cations in NO2 adsorption on Ce(1-x)Zr(x)O2 mixed oxides at ambient conditions.

Mixed oxides Ce(1-x)Zr(x)O(2) prepared by slow coprecipitation in NaOH were tested for NO(2) adsorption in dynamic conditions at room temperature. The samples were characterized before and after exposure to NO(2) by XRD, N(2)-adsorption, thermal analysis, potentiometric titration, and FT-IR. Mixed oxides show a better NO(2) adsorption capacity than the parent materials (CeO(2) and Zr(OH)(4)). This effect is linked to the presence of reduced cerium and oxygen vacancies induced by the addition of Zr(4+) cations to the structure. The results indicate that NO(2) reacts with Ce(3+) to form nitrite and nitrate species on the surface. The NO retention increases with an increase in the Zr(OH)(4) content. A decrease in the density of -OH groups on the surface after the exposure to NO(2), suggests their involvement in reactive adsorption of NO and/or NO(2). From the structural point of view, no real difference was observed on the Ce(1-x)Zr(x)O(2) materials before and after exposure to NO(2).