A review of catalytic hydrogenation of carbon dioxide: From waste to hydrocarbons.

With the rapid development of industrial society and humankind's prosperity, the growing demands of global energy, mainly based on the combustion of hydrocarbon fossil fuels, has become one of the most severe challenges all over the world. It is estimated that fossil fuel consumption continues to grow with an annual increase rate of 1.3%, which has seriously affected the natural environment through the emission of greenhouse gases, most notably carbon dioxide (CO2). Given these recognized environmental concerns, it is imperative to develop clean technologies for converting captured CO2 to high-valued chemicals, one of which is value-added hydrocarbons. In this article, environmental effects due to CO2 emission are discussed and various routes for CO2 hydrogenation to hydrocarbons including light olefins, fuel oils (gasoline and jet fuel), and aromatics are comprehensively elaborated. Our emphasis is on catalyst development. In addition, we present an outlook that summarizes the research challenges and opportunities associated with the hydrogenation of CO2 to hydrocarbon products.

Size-Dependent Microwave Heating and Catalytic Activity of Fine Iron Particles in the Deep Dehydrogenation of Hexadecane.

Knowledge of the electromagnetic microwave radiation-solid matter interaction and ensuing mechanisms at active catalytic sites will enable a deeper understanding of microwave-initiated chemical interactions and processes, and will lead to further optimization of this class of heterogeneous catalysis. Here, we study the fundamental mechanism of the interaction between microwave radiation and solid Fe catalysts and the deep dehydrogenation of a model hydrocarbon, hexadecane. We find that the size-dependent electronic transition of particulate Fe metal from a microwave "reflector" to a microwave "absorber" lies at the heart of efficient metal catalysis in these heterogeneous processes. In this regard, the optimal particle size of a Fe metal catalyst for highly effective microwave-initiated dehydrogenation reactions is approximately 80-120 nm, and the catalytic performance is strongly dependent on the ratio of the mean radius of Fe particles to the microwave skin depth (r/δ) at the operating frequency. Importantly, the particle size of selected Fe catalysts will ultimately affect the basic heating properties of the catalysts and decisively influence their catalytic performance under microwave initiation. In addition, we have found that when two or more materials-present as a mechanical mixture-are simultaneously exposed to microwave irradiation, each constituent material will respond to the microwaves independently. Thus, the interaction between the two materials has been found to have synergistic effects, subsequently contributing to heating and improving the overall catalytic performance.

Sustainable chemical processing of flowing wastewater through microwave energy.

Iron oxide nanostructured catalysts have emerged as potential candidates for efficient energy conversion and electrochemical energy storage devices. However, synthesis and design of nanomaterial plays a key role in its performance and efficiency. Herein, we describe a one-pot solution combustion synthesis (SCS) of α-Fe2O3 with glycine as a fuel, and a subsequent reduction step to produce iron-containing catalysts (i.e., Fe3O4, Fe-Fe3O4, and Fe0). The synthesized iron-based nanoparticles were investigated for methyl orange (MO) degradation through Microwave (MW) energy under continuous flow conditions. Fe-Fe3O4 showed higher MO degradation efficiency than α-Fe2O3, Fe3O4 and Fe0 at low absorbed MW power (i.e. 5-80 W). The enhanced degradation efficiency is associated to the combination of higher availability of electron density and higher heating effect under MW energy. Investigation of dielectric properties showed relative dielectric loss of Fe3O4, Fe-Fe3O4, and Fe0 as 3847, 2010, and 1952, respectively. The calculated average local temperature by the comparative analysis of MW treatment with conventional thermal (CT) treatment showed a marked thermal effect of MW-initiated MO degradation. This work highlights the potential of microwave-driven water depollution under continuous-flow processing conditions and demonstrates the positive impact that earth-abundant Fe catalyst synthesized by green SCS method can have over the treatment of wastewater.

Catalytic Activity of Various Carbons during the Microwave-Initiated Deep Dehydrogenation of Hexadecane.

Carbon materials have been widely used as microwave susceptors in many chemical processes because they are highly effective at transforming incoming electromagnetic energy for local (hot spot) heating. This property raises the intriguing possibility of using the all-pervasive carbonaceous deposits in operating heterogeneous catalytic processes to augment the catalytic performance of microwave-initiated reactions. Here, the catalytic activities of a range of carbon materials, together with carbon residues produced from a "test" reaction-the dehydrogenation of hexadecane under microwave-initiated heterogeneous catalytic processes, have been investigated. Despite the excellent microwave absorption properties observed among these various carbons, only activated carbons and graphene nanoplatelets were found to be highly effective for the microwave-initiated dehydrogenation of hexadecane. During the dehydrogenation of hexadecane on a Fe/SiC catalyst, active carbon species were formed at the early stage of the reactions but were subsequently transformed into filamentous but catalytically inert carbons that ultimately deactivated the operating catalyst.

Superalkali-Alkalide Interactions and Ion Pairing in Low-Polarity Solvents.

The nature of anionic alkali metals in solution is traditionally thought to be "gaslike" and unperturbed. In contrast to this noninteracting picture, we present experimental and computational data herein that support ion pairing in alkalide solutions. Concentration dependent ionic conductivity, dielectric spectroscopy, and neutron scattering results are consistent with the presence of superalkali-alkalide ion pairs in solution, whose stability and properties have been further investigated by DFT calculations. Our temperature dependent alkali metal NMR measurements reveal that the dynamics of the alkalide species is both reversible and thermally activated suggesting a complicated exchange process for the ion paired species. The results of this study go beyond a picture of alkalides being a "gaslike" anion in solution and highlight the significance of the interaction of the alkalide with its complex countercation (superalkali).

Transforming carbon dioxide into jet fuel using an organic combustion-synthesized Fe-Mn-K catalyst.

With mounting concerns over climate change, the utilisation or conversion of carbon dioxide into sustainable, synthetic hydrocarbons fuels, most notably for transportation purposes, continues to attract worldwide interest. This is particularly true in the search for sustainable or renewable aviation fuels. These offer considerable potential since, instead of consuming fossil crude oil, the fuels are produced from carbon dioxide using sustainable renewable hydrogen and energy. We report here a synthetic protocol to the fixation of carbon dioxide by converting it directly into aviation jet fuel using novel, inexpensive iron-based catalysts. We prepare the Fe-Mn-K catalyst by the so-called Organic Combustion Method, and the catalyst shows a carbon dioxide conversion through hydrogenation to hydrocarbons in the aviation jet fuel range of 38.2%, with a yield of 17.2%, and a selectivity of 47.8%, and with an attendant low carbon monoxide (5.6%) and methane selectivity (10.4%). The conversion reaction also produces light olefins ethylene, propylene, and butenes, totalling a yield of 8.7%, which are important raw materials for the petrochemical industry and are presently also only obtained from fossil crude oil. As this carbon dioxide is extracted from air, and re-emitted from jet fuels when combusted in flight, the overall effect is a carbon-neutral fuel. This contrasts with jet fuels produced from hydrocarbon fossil sources where the combustion process unlocks the fossil carbon and places it into the atmosphere, in longevity, as aerial carbon - carbon dioxide.

The periodic law of the chemical elements: 'The new system of atomic weights which renders evident the analogies which exist between bodies' [1].

The historical roots, the discovery and the modern relevance of Dmitri Mendeleev's remarkable advance have been the subject of numerous scholarly works. Here, with a brief overview, we hope to provide a link into the contents of this special issue honouring the great scientist. Mendeleev's advance, announced in March 1869, as he put it in 1889, to the '…then youthful Russian Chemical Society…', first set out the very basis of the periodic law of the chemical elements, the natural relation between the properties of the elements and their atomic weights. This was, and still is, the centrepiece of a historical journey for chemistry to today's position as a pre-eminent science. This article is part of the theme issue 'Mendeleev and the periodic table'.

Metals and non-metals in the periodic table.

The demarcation of the chemical elements into metals and non-metals dates back to the dawn of Dmitri Mendeleev's construction of the periodic table; it still represents the cornerstone of our view of modern chemistry. In this contribution, a particular emphasis will be attached to the question 'Why do the chemical elements of the periodic table exist either as metals or non-metals under ambient conditions?' This is perhaps most apparent in the p-block of the periodic table where one sees an almost-diagonal line separating metals and non-metals. The first searching, quantum-mechanical considerations of this question were put forward by Hund in 1934. Interestingly, the very first discussion of the problem-in fact, a pre-quantum-mechanical approach-was made earlier, by Goldhammer in 1913 and Herzfeld in 1927. Their simple rationalization, in terms of atomic properties which confer metallic or non-metallic status to elements across the periodic table, leads to what is commonly called the Goldhammer-Herzfeld criterion for metallization. For a variety of undoubtedly complex reasons, the Goldhammer-Herzfeld theory lay dormant for close to half a century. However, since that time the criterion has been repeatedly applied, with great success, to many systems and materials exhibiting non-metal to metal transitions in order to predict, and understand, the precise conditions for metallization. Here, we review the application of Goldhammer-Herzfeld theory to the question of the metallic versus non-metallic status of chemical elements within the periodic system. A link between that theory and the work of Sir Nevill Mott on the metal-non-metal transition is also highlighted. The application of the 'simple', but highly effective Goldhammer-Herzfeld and Mott criteria, reveal when a chemical element of the periodic table will behave as a metal, and when it will behave as a non-metal. The success of these different, but converging approaches, lends weight to the idea of a simple, universal criterion for rationalizing the instantly-recognizable structure of the periodic table where …the metals are here, the non-metals are there … The challenge of the metallic and non-metallic states of oxides is also briefly introduced. This article is part of the theme issue 'Mendeleev and the periodic table'.

Facile in situ reductive synthesis of both nitrogen deficient and protonated g-C3N4 nanosheets for the synergistic enhancement of visible-light H2 evolution.

A new strategy is reported here to synthesize both nitrogen deficient and protonated graphitic carbon nitride (g-C3N4) nanosheets by the conjoint use of NH4Cl as a dynamic gas template together with hypophosphorous acid (H3PO2) as a doping agent. The NH4Cl treatment allows for the scalable production of protonated g-C3N4 nanosheets. With the corresponding co-addition of H3PO2, nitrogen vacancies, accompanied by both additional protons and interstitially-doped phosphorus, are introduced into the g-C3N4 framework, and the electronic bandgap of g-C3N4 nanosheets as well as their optical properties and hydrogen-production performance can be precisely tuned by careful adjustment of the H3PO2 treatment. This conjoint approach thereby results in improved visible-light absorption, enhanced charge-carrier separation and a high H2 evolution rate of 881.7 µmol h-1 achieved over the H3PO2 doped g-C3N4 nanosheets with a corresponding apparent quantum yield (AQY) of 40.4% (at 420 nm). We illustrate that the synergistic H3PO2 doping modifies the layered g-C3N4 materials by introducing nitrogen vacancies as well as protonating them, leading to significant photocatalytic H2 evolution enhancements, while the g-C3N4 materials doped with phosphoric acid (H3PO4) are simply protonated further, revealing the varied doping effects of phosphorus having different (but accessible) valence states.

Decarbonising energy: The developing international activity in hydrogen technologies and fuel cells.

Hydrogen technologies and fuel cells offer an alternative and improved solution for a decarbonised energy future. Fuel cells are electrochemical converters; transforming hydrogen (or energy sources containing hydrogen) and oxygen directly into electricity. The hydrogen fuel cell, invented in 1839, permits the generation of electrical energy with high efficiency through a non-combustion, electrochemical process and, importantly, without the emission of CO2 at its point of use. Hitherto, despite numerous efforts to exploit the obvious attractions of hydrogen technologies and hydrogen fuel cells, various challenges have been encountered, some of which are reviewed here. Now, however, given the exigent need to urgently seek low-carbon paths for humankind's energy future, numerous countries are advancing the deployment of hydrogen technologies and hydrogen fuel cells not only for transport, but also as a means of the storage of excess renewable energy from, for example, wind and solar farms. Furthermore, hydrogen is also being blended into the natural gas supplies used in domestic heating and targeted in the decarbonisation of critical, large-scale industrial processes such as steel making. We briefly review specific examples in countries such as Japan, South Korea and the People's Republic of China, as well as selected examples from Europe and North America in the utilization of hydrogen technologies and hydrogen fuel cells.

Solvation of Na? in the Sodide Solution, LiNa?10MeNH2.

Alkalides, the alkali metals in their ?1 oxidation state, represent some of the largest and most polarizable atomic species in condensed phases. This study determines the solvation environment around the sodide anion, Na?, in a system of co-solvated Li+. We present isotopically varied total neutron scattering experiments alongside empirical potential structure refinement and ab initio molecular dynamics simulations for the alkali?alkalide system, LiNa?10MeNH2. Both local coordination modes and the intermediate range liquid structure are determined, which demonstrate that distinct structural correlations between cation and anion in the liquid phase extend beyond 8.6 ?. Indeed, the local solvation around Na? is surprisingly well defined with strong solvent orientational order, in contrast to the classical description of alkalide anions not interacting with their environment. The ion-paired Li(MeNH2)4+?Na? species appears to be the dominant alkali?alkalide environment in these liquids, whereby Li+ and Na? share a MeNH2 molecule through the amine group in their primary solvation spheres.

Rapid, non-invasive characterization of the dispersity of emulsions via microwaves.

A rapid and non-invasive method to determine the dispersity of emulsions is developed based on the interrelationship between the droplet size distribution and the dielectric properties of emulsions. A range of water-in-oil emulsions with different water contents and droplet size distributions were analysed using a microwave cavity perturbation technique together with dynamic light scattering. The results demonstrate that the dielectric properties, as measured by non-invasive microwave cavity analysis, can be used to characterise the dispersity of emulsions, and is also capable of characterizing heavy oil emulsions. This technique has great potential for industrial applications to examine the sedimentation, creaming and hence the stability of emulsions.

Defining the flexibility window in ordered aluminosilicate zeolites.

The flexibility window in zeolites was originally identified using geometric simulation as a hypothetical property of SiO2 systems. The existence of the flexibility window in hypothetical structures may help us to identify those we might be able to synthesize in the future. We have previously found that the flexibility window in silicates is connected to phase transitions under pressure, structure amorphization and other physical behaviours and phenomena. We here extend the concept to ordered aluminosilicate systems using softer 'bar' constraints that permit additional flexibility around aluminium centres. Our experimental investigation of pressure-induced amorphization in sodalites is consistent with the results of our modelling. The softer constraints allow us to identify a flexibility window in the anomalous case of goosecreekite.

Rapid Production of High-Purity Hydrogen Fuel through Microwave-Promoted Deep Catalytic Dehydrogenation of Liquid Alkanes with Abundant Metals.

Hydrogen as an energy carrier promises a sustainable energy revolution. However, one of the greatest challenges for any future hydrogen economy is the necessity for large scale hydrogen production not involving concurrent CO2 production. The high intrinsic hydrogen content of liquid-range alkane hydrocarbons (including diesel) offers a potential route to CO2 -free hydrogen production through their catalytic deep dehydrogenation. We report here a means of rapidly liberating high-purity hydrogen by microwave-promoted catalytic dehydrogenation of liquid alkanes using Fe and Ni particles supported on silicon carbide. A H2 production selectivity from all evolved gases of some 98 %, is achieved with less than a fraction of a percent of adventitious CO and CO2 . The major co-product is solid, elemental carbon.

Hydrogen bonds between methanol and the light liquid olefins 1-pentene and 1-hexene: from application to fundamental science.

We have recently developed a new extraction process for significantly reducing the olefin content in commercial FCC gasoline. To gain insights into the origins of this process, we have investigated the dissolution of the light liquid olefins 1-pentene and 1-hexene in methanol through computer modelling together with NMR spectroscopy. We find two important hydrogen bonding modes for methanol olefin interactions - namely, O-Hπ and C-HO.

Electron Solvation and the Unique Liquid Structure of a Mixed-Amine Expanded Metal: The Saturated Li-NH3 -MeNH2 System.

Metal-amine solutions provide a unique arena in which to study electrons in solution, and to tune the electron density from the extremes of electrolytic through to true metallic behavior. The existence and structure of a new class of concentrated metal-amine liquid, Li-NH3 -MeNH2 , is presented in which the mixed solvent produces a novel type of electron solvation and delocalization that is fundamentally different from either of the constituent systems. NMR, ESR, and neutron diffraction allow the environment of the solvated electron and liquid structure to be precisely interrogated. Unexpectedly it was found that the solution is truly homogeneous and metallic. Equally surprising was the observation of strong longer-range order in this mixed solvent system. This is despite the heterogeneity of the cation solvation, and it is concluded that the solvated electron itself acts as a structural template. This is a quite remarkable observation, given that the liquid is metallic.

Intrinsic flexibility of porous materials; theory, modelling and the flexibility window of the EMT zeolite framework.

Framework materials have structures containing strongly bonded polyhedral groups of atoms connected through their vertices. Typically the energy cost for variations of the inter-polyhedral geometry is much less than the cost of distortions of the polyhedra themselves - as in the case of silicates, where the geometry of the SiO4 tetrahedral group is much more strongly constrained than the Si-O-Si bridging angle. As a result, framework materials frequently display intrinsic flexibility, and their dynamic and static properties are strongly influenced by low-energy collective motions of the polyhedra. Insight into these motions can be obtained in reciprocal space through the `rigid unit mode' (RUM) model, and in real-space through template-based geometric simulations. We briefly review the framework flexibility phenomena in energy-relevant materials, including ionic conductors, perovskites and zeolites. In particular we examine the `flexibility window' phenomenon in zeolites and present novel results on the flexibility window of the EMT framework, which shed light on the role of structure-directing agents. Our key finding is that the crown ether, despite its steric bulk, does not limit the geometric flexibility of the framework.

Origins of conductivity improvement in fluoride-enhanced silicon doping of ZnO films.

Fluoride in spray pyrolysis precursor solutions for silicon-doped zinc oxide (SiZO) transparent conductor thin films significantly improves their electrical conductivity by enhancing silicon doping efficiency and not, as previously assumed, by fluoride doping. Containing only earth-abundant elements, SiZO thus prepared rivals the best solution-processed indium-doped ZnO in performance.

On the occurrence of metallic character in the periodic table of the chemical elements.

The classification of a chemical element as either 'metal' or 'non-metal' continues to form the basis of an instantly recognizable, universal representation of the periodic table (Mendeleeff D. 1905 The principles of chemistry, vol. II, p. 23; Poliakoff M. & Tang S. 2015 Phil. Trans. R. Soc. A 373: , 20140211). Here, we review major, pre-quantum-mechanical innovations (Goldhammer DA. 1913 Dispersion und Absorption des Lichtes; Herzfeld KF. 1927 Phys. Rev. 29: , 701-705) that allow an understanding of the metallic or non-metallic status of the chemical elements under both ambient and extreme conditions. A special emphasis will be placed on recent experimental advances that investigate how the electronic properties of chemical elements vary with temperature and density, and how this invariably relates to a changing status of the chemical elements. Thus, the prototypical non-metals, hydrogen and helium, becomes metallic at high densities; and the acknowledged metals, mercury, rubidium and caesium, transform into their non-metallic forms at low elemental densities. This reflects the fundamental fact that, at temperatures above the absolute zero of temperature, there is therefore no clear dividing line between metals and non-metals. Our conventional demarcation of chemical elements as metals or non-metals within the periodic table is of course governed by our experience of the nature of the elements under ambient conditions. Examination of these other situations helps us to examine the exact divisions of the chemical elements into metals and non-metals (Mendeleeff D. 1905 The principles of chemistry, vol. II, p. 23).