Rapid and selective detection of dopamine in human serum using an electrochemical sensor based on zinc oxide nanoparticles, nickel phthalocyanines, and carbon nanotubes.

Composite materials have gained significant attention owing to the synergistic effects of their constituent materials, thereby facilitating their utilization in new applications or in improving the existing ones. In this study, a composite based on nickel phthalocyanine (NiTsPc), zinc oxide nanoparticles (ZnONPs), and carbon nanotubes (CNT) was developed and subsequently immobilized on a pyrolytic graphite electrode (PGE). The PGE/NiTsPc-ZnONPs-CNT was identified as a selective catalytic hybrid system for detection of neurotransmitter dopamine (DA). The electrochemical and morphological characterizations were conducted using atomic force microscopy (AFM). Chronoamperometry and differential pulse voltammetry (DPV) were used to detect DA and detection limits of 24 nM and 7.0 nM was found, respectively. In addition, the effects of some possible DA interferents, such as ascorbic acid, uric acid, and serotonin, on DA response were evaluated. Their presence did not show significant variations in the DA electrochemical response. The high specificity and sensitivity of PGE/NiTsPc-ZnONPs-CNT for DA enabled its direct detection in human serum without sample pretreatment as well as in DA-enriched serum samples, whose recovery levels were close to 100%, thereby confirming the effectiveness of the proposed method. In general, PGE/NiTsPc-ZnONPs-CNT is a promising candidate for future applications in clinical diagnosis.

Poly(Alizarin Red S) on pyrolytic graphite electrodes as a new multi-electronic system for sensing oxandrolone in urine.

This study presents a new polymeric and multielectronic system, the poly-Alizarin Red S (PARS), obtained from the electropolymerization of Alizarin Red S (ARS) dye on an edge-plane pyrolytic graphite electrode (EPPGE) surface. During EPPGE/PARS electrochemical characterization, we identified seven stable and reversible redox peaks in acidic medium (0.10 mol L-1, pH 1.62 KH2PO4), which indicated its mechanisms underlying electropolymerization and electrochemical behavior. To the best of our knowledge, this is the first study to use an EPPGE/PARS electrode to detect oxandrolone (OXA) in artificial urine, where PARS acts as a synthetic receptor for OXA. The interactions of OXA with EPPGE/PARS as well as the properties of PARS were investigated using density functional theory (DFT). Atomic force microscopy (AFM) was used to characterize EPPGE/PARS, and it was found that the PARS polymer formed a semi-globular phase on the EPPGE surface. The limit of detection for OXA found by the sensor was close to 0.50 nmol L-1, with a recovery rate of approximately 100% in artificial urine. In addition to the application proposed in this study, EPPGE/PARS is a low-cost product that could be applied in several devices and processes, such as supercapacitors and electrocatalysis.

Cashew-gum-based silver nanoparticles and palygorskite as green nanocomposites for antibacterial applications.

Nanocomposite materials have been proposed to enhance the properties of different materials. In this study, palygorskite (Pal) clay is proposed as a support matrix for silver nanoparticles stabilised with cashew gum (Anacardium occidentale L.) (AgNPs-CG), producing the Pal/AgNPs-CG nanocomposite, whose bactericidal activity was studied. AgNPs-CG was synthesised using a green method in which CG acted as a reducing and stabilising agent for these nanostructures. AgNPs-CGs were subsequently characterised then adsorbed to the Pal surface, which was previously treated to remove impurities such as quartz. Pal and Pal/AgNPs-CG were characterised by X-ray diffraction, specific surface area, thermal analysis, Fourier transform infrared spectroscopy, scanning electron microscopy, energy dispersive spectroscopy, and transmission electron microscopy. The antibacterial activity assay by the direct contact method showed that the synergistic effect of the combination of AgNPs-CG and Pal increased the bactericidal effect of the nanomaterial compared with the AgNPs-CG activity, reaching a percentage inhibition of up to 70.2% against E. coli and 85.3% against S. aureus. Nanocomposite atoxicity was demonstrated by the Artemia Salina model. Thus, the Pal/AgNPs-CG nanocomposite emerges as a nanomaterial with potential antibacterial applications.

Development of cashew gum-based bionanocomposite as a platform for electrochemical trials.

Cashew gum (CG) biopolymer is from natural source, biocompatible, non-toxic, inexpensive, and easily extracted from the exudate of the Anacardium occidentale L. tree, which is abundant in the north and northeast of Brazil. Prussian blue nanoparticles (PBNPs) can be embedded in the natural materials and have been used in several (bio)technological applications. This work presents a new cashew gum-based bionanocomposite containing PBNPs prepared in situ (PBNPs@GC), where the CG biopolymer was used as a matrix to prevent nanoparticles aggregation. Herein, investigate the effect of different CG concentrations about the bionanocomposite properties, and demonstrated it use as potential electrochemical sensor for drugs trials. The PBNPs@CG were characterized using UV-Vis, FTIR, XRD, DLS, zeta potential, TEM and cyclic voltammetry. The CG proved to be a suitable host for the PBNPs synthetized. These PBNPs were spherical, crystalline, stable, with a size of 5.0-15.0 nm, and without agglomeration. The bionanocomposite electrochemical behavior shown their ability to the oxidize some drugs, such as metamizole (MTM), acetaminophen (ACT) and methotrexate (MTX). These results demonstrated the innovative character of these bionanocomposite and encourage their further exploration for applications in nanobiomedicine like electrochemical (bio)sensors.

Synthesis of catalyst composed of palygorskita-TiO2 and silver nanoparticles for the development of assays antioxidant based on the generation of reactive oxygen species.

The great interest in compounds that present antioxidant capacity has generating the urgent need for analytical methods that could determine the antioxidant potential of these sources. A method based on generation of reactive oxygen species in water from catalyst composed of palygorskita-TiO2 and silver nanoparticles (AgNPs/TiO2-PAL) was developed and applied to antioxidant assays. Silver nanoparticles were synthesized using silver nitrate solution, sodium borohydride reducing agent and Caraia gum as stabilizing agent. Incorporation of AgNPs into the previously synthesized TiO2-PAL was performed. The catalyst AgNPs/TiO2-PAL was characterized by UV-vis spectroscopy, X-ray diffractometry and scanning electron microscopy. The catalyst AgNPs/TiO2-PAL were used to perform an antioxidant activity method which consisted in monitoring the discoloration of acid yellow 73 dye (AY73) in the presence of gallic acid antioxidant comparing to the dye discoloration in the absence of the antioxidant. A microplate reader was used to measure the discoloration of the aqueous solutions of AY73, irradiated by UV light for 60 min. The effect of reactive oxygen species generated by AgNPs/TiO2-PAL based in photocatalytic kinetics of AY73 dye was investigated. The oxidation of AY73 dye by photocatalysis in the system with AgNPs/TiO2-PAL catalysts was carried out mainly by the participation of O2 ·-, HO· and 1O2 species, in this order of importance. The results showed that the synthesis of the AgNPs/TiO2-PAL catalyst was successfully carried out and the application of this material in the development of an innovative methodology for the determination of antioxidant activity was extremely promising.

Development of a low-cost electrochemical sensor based on babassu mesocarp (Orbignya phalerata) immobilized on a flexible gold electrode for applications in sensors for 5-fluorouracil chemotherapeutics.

There are increasing concerns regarding the risks arising from the contamination of manipulators of antineoplastic drugs promoted by occupational exposure or even in the dosage of drugs. The present work proposes the use of an electrochemical sensor based on a biopolymer extracted from the babassu coconut (Orbignya phalerata) for the determination of an antineoplastic 5-fluorouracil (5-FU) drug as an alternative for the monitoring of these drugs. In order to reduce the cost of this sensor, a flexible gold electrode (FEAu) is proposed. The surface modification of FEAu was performed with the deposition of a casting film of the biopolymer extracted from the babassu mesocarp (BM) and modified with phthalic anhydride (BMPA). The electrochemical activity of the modified electrode was characterized by cyclic voltammetry (CV), and its morphology was observed by atomic force microscopy (AFM). The FEAu/BMPA showed a high sensitivity (8.8 µA/µmol/L) and low limit of detection (0.34 µmol/L) for the 5-FU drug in an acid medium. Electrochemical sensors developed from the babassu mesocarp may be a viable alternative for the monitoring of the 5-FU antineoplastic in pharmaceutical formulations, because in addition to being sensitive to this drug, they are constructed of a natural polymer, renewable, and abundant in nature. Graphical abstract ᅟ.

Electrochemical sensors and biosensors for the analysis of antineoplastic drugs.

Cancer is a leading cause of death worldwide, often being treated with antineoplastic drugs that have high potential for toxicity to humans and the environment, even at very low concentrations. Therefore, monitoring these drugs is of utmost importance. Among the techniques used to detect substances at low concentrations, electrochemical sensors and biosensors have been noted for their practicality and low cost. This review brings, for the first time, a simplified outline of the main electrochemical sensors and biosensors developed for the analysis of antineoplastic drugs. The drugs analyzed and the methodology used for electrochemical sensing are described, as are the techniques used for drug quantification and the analytical performance of each sensor, highlighting the limit of detection (LOD), as well as the linear range of quantification (LR) for each system. Finally, we present a technological prospection on the development and use of electrochemical sensors and biosensors in the quantification of antineoplastic drugs. A search of international patent databases revealed no patents currently submitted under this topic, suggesting this is an area to be further explored. We also show that the use of these systems has been gaining prominence in recent years, and that the quantification of antineoplastic drugs using electrochemical techniques could bring great financial and health benefits.

Lateral Flow Assay for Interleukin 6: A Technological and Scientific Prospection of a 10-Year Survey.

BACKGROUND: Interleukin-6 (IL-6) is a multifunctional cytokine that plays a crucial role not only in the immune system but also in numerous biological processes. Elevated IL-6 levels have been observed in many types of cancer and inflammatory diseases. Among the techniques that have been used to quantify IL-6, a Lateral Flow Assay (LFA) is one of the most promising. OBJECTIVE: The objective of this study was to perform a technological and scientific exploration of the development of an LFA for IL-6. METHOD: The Instituto Nacional de Propriedade Industrial-INPI (Brazil), European Patent Office - Espacenet, and United States Patent and Trademark Office-USPTO were used for the technological prospection to consider all the patents regarding an LFA for IL-6 detection. For the scientific investigation, the following periodic databases were used: Web of Science, Science Direct, PubMed, and Scielo, and were monitored from 2007 to May 2017. RESULTS: We found no patents based on the searched keywords, and a limited number of scientific articles were found. Therefore, the development of an LFA sensor for the detection of IL-6 appears to be innovative with significant biotechnological importance, creating a technology transfer to promote economic and industrial growth. CONCLUSION: The development of lateral flow immunosensors for IL-6 is innovative, as we could not find patents describing such a biosensor. Scientific prospection reported two lateral flow immunosensors. However, the test for IL-6 cannot be completed without using some kind of equipment for detection, such as the one we propose in future developments.

Layer-by-layer films containing peptides of the Cry1Ab16 toxin from Bacillus thuringiensis for potential biotechnological applications.

Cry1Ab16 is a toxin of crystalline insecticidal proteins that has been widely used in genetically modified organisms (GMOs) to gain resistance to pests. For the first time, in this study, peptides derived from the immunogenic Cry1Ab16 toxin (from Bacillus thuringiensis) were immobilized as layer-by-layer (LbL) films. Given the concern about food and environmental safety, a peptide with immunogenic potential, PcL342-354C, was selected for characterization of the electrochemical, optical, and morphological properties. The results obtained by cyclic voltammetry (CV) showed that the peptide have an irreversible oxidation process in electrolyte of 0.1 mol · L(-1) potassium phosphate buffer (PBS) at pH7.2. It was also observed that the electrochemical response of the peptide is governed mainly by charge transfer. In an attempt to maximize the electrochemical signal of peptide, it was intercalated with natural (agar, alginate and chitosan) or synthetic polymers (polyethylenimine (PEI) and poly(sodium 4-styrenesulfonate (PSS)). The presence of synthetic polymers on the film increased the electrochemical signal of PcL342-354C up to 100 times. Images by Atomic Force Microscopy (AFM) showed that the immobilized PcL342-354C formed self-assembled nanofibers with diameters ranging from 100 to 200 nm on the polymeric film. By UV-Visible spectroscopy (UV-Vis) it was observed that the ITO/PEI/PSS/PcL342-354C film grows linearly up to the fifth layer, thereafter tending to saturation. X-ray diffraction confirmed the presence on the films of crystalline ITO and amorphous polypeptide phases. In general, the ITO/PEI/PSS/PcL342-354C film characterization proved that this system is an excellent candidate for applications in electrochemical sensors and other biotechnological applications for GMOs and environmental indicators.

Immobilization of cationic antimicrobial peptides and natural cashew gum in nanosheet systems for the investigation of anti-leishmanial activity.

This report details the development of thin films containing an antimicrobial peptide, specifically, dermaseptin 01 (GLWSTIKQKGKEAAIAAA-KAAGQAALGAL-NH2, [DRS 01]), and a natural polysaccharide, for a novel application in detecting the presence of Leishmania cells and maintaining anti-leishmanial activity. The peptide DRS 01 was immobilized in conjunction with natural cashew gum (CG) onto an indium tin oxide (ITO) substrate using the Layer-by-Layer (LbL) deposition technique. The LbL film ITO/CG/DRS 01, containing DRS 01 as the outer layer, was capable of detecting the presence of Leishmania cells and acting as an anti-leishmanial system. Detection was performed using cyclic voltammetry (CV) in phosphate buffer (pH7.2) in the presence of promastigote cells (0-10(7)cells/mL). The results showed a linear and inversely proportional relation between the concentration of Leishmania infantum protozoan cells and the measured current values obtained for the films, which was attributed to the effect of peptide-induced lysis of the cell membrane, and resulted in freed residues that were adsorbed on the electrode surface. With this, the paper shows a method using thin films with this new material to demonstrate the anti-leishmanial activity in vitro models of carpet-like mechanisms.