RESUMO
Two simple, selective and accurate methods were developed and validated for the determination of brimonidine tartrate (BT) in pure state and pharmaceutical formulations. Both methods are based on the coupling of the drug with 4-chloro-7-nitro-2,1,3-benzoxadiazole in borate buffer (pH 8.5) at 70 °C and measurement of the reaction product spectrophotometrically at 407 nm (method I) or spectrofluorimetrically at 528 nm upon excitation at 460 nm (method II). The calibration graphs were rectilinear over the concentration ranges of 1.0-16.0 and 0.1-4.0 µg/mL with lower detection limits of 0.21 and 0.03, and lower quantification limits of 0.65 and 0.09 µg/mL for methods I and II, respectively. Both methods were successfully applied to the analysis of commercial ophthalmic solution with mean recovery of 99.50 ± 1.00 and 100.13 ± 0.71%, respectively. Statistical analysis of the results obtained by the proposed methods revealed good agreement with those obtained using a comparison method. The proposed spectrofluorimetric method was extended to a stability study of BT under different ICH-outlined conditions such as alkaline, acidic, oxidative and photolytic degradation. Furthermore, the kinetics of oxidative degradation of the drug was investigated and the apparent first-order reaction rate constants, half-life times and Arrhenius equation were estimated. The proposed methods are practical and valuable for routine applications in quality control laboratories for the analysis of BT.
Assuntos
Tartarato de Brimonidina/análise , Soluções Oftálmicas/análise , Espectrometria de Fluorescência/métodos , 4-Cloro-7-nitrobenzofurazano/química , Tartarato de Brimonidina/química , Calibragem , Estabilidade de Medicamentos , Limite de Detecção , Soluções Oftálmicas/química , Espectrofotometria Ultravioleta/métodosRESUMO
A rapid, simple, and sensitive second-derivative synchronous fluorimetric method has been developed and validated for the simultaneous analysis of a binary mixture of desloratadine (DSL) and montelukast sodium (MKT) in their co-formulated tablets. The method is based on measurement of the synchronous fluorescence intensities of the two drugs in McIlvaine's buffer, pH 2.3, in the presence of carboxy methyl cellulose sodium (CMC) as a fluorescence enhancer at a constant wavelength difference (Δλ) of 160 nm. The presence of CMC enhanced the synchronous fluorescence intensity of DSL by 216% and that of MKT by 28%. A linear dependence of the concentration on the amplitude of the second derivative synchronous fluorescence spectra was achieved over the ranges of 0.10-2.00 and 0.20-2.00 µg/mL with limits of detection of 0.02 and 0.03, and limits of quantification of 0.05 and 0.10 µg/mL for DSL and MKT, respectively. The proposed method was successfully applied for the determination of the studied compounds in laboratory-prepared mixtures and tablets. The results were in good agreement with those obtained with the comparison method. The high sensitivity attained by the proposed method allowed the determination of MKT in spiked human plasma with average % recovery of 100.11 ± 2.44 (n = 3).
Assuntos
Acetatos/análise , Loratadina/análogos & derivados , Quinolinas/análise , Espectrometria de Fluorescência/métodos , Acetatos/administração & dosagem , Acetatos/sangue , Calibragem , Carboximetilcelulose Sódica/química , Química Farmacêutica/métodos , Ciclopropanos , Humanos , Concentração de Íons de Hidrogênio , Limite de Detecção , Loratadina/análise , Loratadina/sangue , Quinolinas/administração & dosagem , Quinolinas/sangue , Reprodutibilidade dos Testes , Sensibilidade e Especificidade , Solventes/química , Sulfetos , Comprimidos/análiseRESUMO
A simple and highly sensitive stability-indicating HPLC method was developed and validated for the determination of the new antidepressant agent, agomelatine (AGM). Separation of AGM from its stress-induced degradation products was achieved on a BDS Hypersil phenyl column (250 mm × 4.6 mm i.d., 5 µm particle size) using methanol-0.05 M phosphate buffer of pH 2.5 (35: 65, v/v) as a mobile phase with fluorescence detection at 230/370 nm. Naproxen was used as an internal standard. The method satisfied all the validation requirements, as evidenced by good linearity (correlation coefficient of 0.9999, over the concentration range 0.4-40.0 ng/mL), accuracy (recovery average 99.55 ± 0.90%), precision (intra-day RSD 0.54-1.35% and inter-day RSD 0.93-1.26%), robustness and specificity. The stability of AGM was investigated under different ICH recommended stress conditions including acidic, alkaline, neutral, oxidative and photolytic. AGM was found to be labile to acidic and alkaline degradation and a kinetic study was conducted to explore its degradation behavior. First-order degradation rate constants and half-life times were calculated in each case. The proposed method was applied for the determination of AGM in tablets and spiked human plasma with mean percentage recoveries of 99.87 ± 0.31 (n = 3) and 102.09 ± 5.01 (n = 5), respectively. Hence, the proposed method was successfully applied for the determination of AGM in human volunteer plasma. The results were compared statistically with those obtained by a comparison HPLC method revealing no significant differences between the two methods regarding accuracy and precision.
Assuntos
Acetamidas/análise , Fluorescência , Adulto , Cromatografia Líquida de Alta Pressão , Estabilidade de Medicamentos , Feminino , Voluntários Saudáveis , Humanos , Concentração de Íons de Hidrogênio , Estrutura Molecular , Espectrometria de Fluorescência , Comprimidos/análiseRESUMO
A simple and reliable HPLC method was developed and validated for the simultaneous determination of the hypnotic drug, zopiclone (ZPC) and its degradation product and main impurity, 2-amino-5-chloropyridine (ACP). The analyses were carried out on BDS Hypersil phenyl column (4.6 mm × 250 mm, 5 µm particle size) using micellar mobile phase consisting of 0.15M SDS, 10% n-propanol, 0.3% triethylamine, and 0.02 M orthophosphoric acid (pH 3.5) with timed programmable fluorescence detection. The proposed method was found to be rectilinear over the concentration ranges of 0.5-10.0 µg/mL for ZPC and 2.5-50 ng/mL for ACP. Moreover, the method was applied for the determination of ZPC in commercial tablets with mean percentage recovery of 99.06±1.49. The results of the proposed method were statistically compared with those obtained by the comparison method revealing no significance differences in the performance of the two methods regarding accuracy and precision. Furthermore, the proposed method was applied for the detection and determination of ACP in human urine as a marker for ZPC intake.
Assuntos
Compostos Azabicíclicos/urina , Cromatografia Líquida de Alta Pressão/métodos , Piperazinas/urina , Piridinas/urina , Espectrometria de Fluorescência/métodos , 1-Propanol/química , Adulto , Compostos Azabicíclicos/química , Contaminação de Medicamentos , Estabilidade de Medicamentos , Feminino , Humanos , Concentração de Íons de Hidrogênio , Modelos Lineares , Micelas , Piperazinas/química , Piridinas/química , Reprodutibilidade dos Testes , Dodecilsulfato de Sódio/química , Comprimidos/química , TemperaturaRESUMO
A simple, sensitive, stability-indicating HPLC method was developed and validated for the quantitative determination of the vasoprotective drug, naftazone in presence of its degradation products. The analysis was carried out on a Nucleosil 100-5 phenyl column (250 mm × 4.6 mm, 5 µm) using a mobile phase consisting of methanol-0.02 M sodium dihydrogen phosphate mixture (60:40, v/v) of pH 6.0. The analyses were performed at ambient temperature with a flow rate of 1.0 mL/min and UV detection at 270 nm. The method showed good linearity over the concentration range of 0.1-10.0 µg/mL with a lower detection limit of 0.032 and quantification limit of 0.096 µg/mL. The suggested method was successfully applied for the analysis of naftazone in its commercial tablets. Moreover, it was utilized to investigate the kinetics of alkaline, acidic and oxidative degradation of the drug. The apparent first-order rate constants, half-life times, and activation energies of the degradation process were calculated. The pH-rate profile curve was derived. Furthermore, the proposed method was successfully applied to the content uniformity testing of naftazone tablets.
Assuntos
Cromatografia Líquida de Alta Pressão/métodos , Naftoquinonas/química , Estabilidade de Medicamentos , Cinética , Naftoquinonas/normas , Controle de Qualidade , Comprimidos/química , Comprimidos/normasRESUMO
A highly sensitive and simple spectrofluorimetric method was developed for the determination of loratadine (LRT) and desloratadine (DSL) in their pharmaceutical formulations. The proposed method is based on investigation of the fluorescence spectral behaviour of LRT and DSL in a sodium dodecyl sulphate (SDS) micellar system. In aqueous solution of acetate buffer of pH 4.5, the fluorescence intensities of both LRT and DSL were greatly enhanced (240%) in the presence of SDS. The fluorescence intensity was measured at 438 nm after excitation at 290 nm for both drugs. The fluorescence-concentration plots were rectilinear over the range 0.05-2.0 µg/mL for both LRT and DSL, with lower detection limits of 5.13 × 10(-3) and 6.35 × 10(-3) µg/mL for LRT and DSL, respectively. The method was successfully applied to the analysis of the two drugs in their commercial tablets, capsules and syrups, and the results were in good agreement with those obtained with the official or comparison methods. The proposed method is specific for the determination of LRT in the presence of other co-formulated drugs, such as pseudoephedrine. The application of the proposed method was extended to stability studies of LRT and DSL after exposure to different forced degradation conditions, such as acidic, alkaline and oxidative conditions, according to ICH guidelines.
Assuntos
Formas de Dosagem , Antagonistas não Sedativos dos Receptores H1 da Histamina/análise , Loratadina/análise , Micelas , Espectrometria de Fluorescência/métodos , Limite de Detecção , Reprodutibilidade dos TestesRESUMO
A simple, sensitive, rapid and accurate spectrophotometric method was developed for the determination of risedronate, a bisphosphonate drug important for the treatment of a variety of bone diseases, in raw material and pharmaceutical formulations. The proposed method is based on complex formation between risedronate and Cu (II) ions in acetate buffer of pH5.5. The optimum conditions for this reaction were ascertained and a spectrophotometric method was developed for the determination of risedronate in concentration range of 2-40 µg/mL with detection limit of 0.03 µg/mL (9.51 × 10(-8) mol/L). The molar absorbtivity was 8.00 × 10(3) l/mol/cm. The method was successfully applied for the determination of risedronate in tablet dosage form with mean percentage recovery of 101.04 ± 0.32. The results obtained were favorably compared with those obtained by the comparison method. Furthermore, the proposed method was applied for content uniformity testing of risedronate tablets.