Novel RP-HPLC-DAD approach for simultaneous determination of chlorphenoxamine hydrochloride and caffeine with their related substances.

Ensuring the quality control of active pharmaceutical ingredients is crucial for drug products being introduced into the market. Even for established drugs, it is necessary to maintain a cutting-edge impurity control system. To analyze caffeine and chlorphenoxamine hydrochloride in their binary mixture, as well as theophylline and chlorphenoxamine N-oxide as related substances, a reversed phase-high performance liquid chromatography combined with a diode array detector system was created. The chromatographic separation was conducted using a C18 X-select Waters® column. The mobile phase consisted of 20.0 mM potassium dihydrogen phosphate modified to pH 3 with o-phosphoric acid and methanol. A gradient elution program was adopted at a flow rate of 1.3 mL/min and detected at a wavelength of 222 nm. The present methodology demonstrates a concentration ranging from 2-60, 1-80, 0.5-20 to 0.4-20 µg/mL for chlorphenoxamine hydrochloride, caffeine, chlorphenoxamine N-Oxide and theophylline, respectively. Chlorphenoxamine N-Oxide, being an impurity of chlorphenoxamine was prepared by refluxing intact drug with 5% H2O2 for 24 h at 100 °C. One of the objectives of the analytical community is to promote the adoption of green analysis methods, which involve the development of environmentally friendly techniques. The levels of greenness and whiteness were evaluated using four specific tools: Eco-Scale System, GAPI, AGREE, and RGB tool. Furthermore, we have evaluated the greenness of the analytical method presented and compared its performance and greenness to that of the approach described in the literature. In this study, results from CPX and CAF analysis were compared to those obtained in a previous study. The result shows that there is no notable variation in precision and accuracy. The proposed method was validated in accordance with the requirements of ICH.

Fluorescence imaging approaches for eco-friendly determination of perampanel in human plasma and application for therapeutic drug monitoring.

Antiepileptic drugs are among the most common medications that require therapeutic drug monitoring (TDM). Indeed, TDM provides a realistic approach to adjust drug doses for epilepsy based on plasma concentrations to optimize its clinical outcome. The most common technique for TDM is high-performance liquid chromatography, which has a very low green profile among analytical techniques. Perampanel (PER) is an inherently fluorescent compound that its fluorophore readily allows sensitive and quantitative measurements. This paper describes the development and validation of a sensitive, specific, and eco-friendly spectrofluorimetric method for the determination of PER. Experimental parameters affecting fluorescence intensity of the compound, including solvent dilution, temperature, and excitation wavelength, were studied and optimized. The developed spectrofluorimetric method was established in acetonitrile at λex  = 295 nm and λem  = 431 nm over a concentration range of 5-60 ng/ml. The adopted method was applied for the determination of PER in human plasma; it was effective in the range of 15-50 ng/ml. The proposed method was found to be sensitive and specific for PER and can be applied successfully in TDM of PER and in quality control laboratories.

An eco-friendly separation-based framework for quantitative determination and purity testing of an antihypertensive ternary pharmaceutical formulation.

Designing new, verified methodologies with a focus on sustainability, analytical efficiency, simplicity, and the environment has become a major priority for pharmaceutical quality control units. In this way, sustainable and selective separation-based methodologies were designed and validated for the concurrent estimation of amiloride hydrochloride (AML), hydrochlorothiazide (HCT) and timolol maleate (TIM) in their fixed dose formulation (Moducren® Tablets) along with hydrochlorothiazide potential impurities, salamide (DSA) and chlorothiazide (CT). The first method is a high performance thin layer chromatographic method (HPTLC-densitometry). The first developed method employed silica gel HPTLC F254 plates as stationary phase using a chromatographic developing system composed of ethyl acetate-ethanol-water-ammonia (8.5:1:0.5:0.3, by volume). The separated drug bands were densito-metrically measured at 220.0 nm for AML, HCT, DSA and CT and at 295.0 nm for TIM. The linearity was assessed over a wide concentration range, 0.5-10 µg/band, 1.0-16.0 µg/band and 1.0-14 µg/band for AML, HCT and TIM, in order and 0.05-1.0 µg/band for each of DSA and CT. The second method is capillary zone electrophoresis (CZE). The electrophoretic separation was achieved using background electrolyte (BGE), borate buffer 40.0 mM with pH 9.0 ± 0.2, at applied voltage of + 15 kV with on-column diode array detection at 200.0 nm. The method linearity was reached over the concentration range of 20.0-160.0 µg/mL, 10.0-200.0 µg/mL, 10.0-120.0 µg/mL for AML, HCT and TIM, respectively and 10.0-100.0 µg/mL for DSA. The suggested methods were optimized to achieve best performance and validated agreeing with the ICH guidelines. Assessment of methods' sustainability and greenness was performed using different greenness assessment tools.

RP-HPLC Method for the Simultaneous Determination of a Quaternary Mixture of Propyphenazone, Flavoxate HCl and Two of Their Official Impurities with Dissolution Profiling of Their Tablets.

BACKGROUND: Determination of different drugs in the presence of their impurities is now receiving attention from regulatory authorities such as the ICH and the United States Food and Drug Administration (USFDA). OBJECTIVE: To develop and validate a reversed-phase (RP)-HPLC method for the simultaneous separation and quantification of a quaternary mixture of propyphenazone, flavoxate HCl, and their official impurities; phenazone and 3-methylflavone-8-carboxylic acid, respectively. Then utilize the validated method as an in vitro methodology to monitor the rate of release of the active ingredients from Cistalgan® tablets. METHODS: RP-HPLC method was applied using Kinetex® coreshell C8 column (250 mm × 4.6 mm I.D., particle size 5 µm) and acetonitrile: phosphate buffer pH 3.50 (42:58, v/v) as the mobile phase with UV detection at 240.0 nm. RESULTS: The studied components were eluted with average retention times of 2.80, 3.40, 4.20, and 5.90 min for phenazone, flavoxate HCl, 3-methylflavone-8-carboxylic acid, and propyphenazone, respectively within linearity range of 1.00-60.00 µg/mL propyphenazone, 3.00-60.00 µg/mL flavoxate HCl and 0.50-40.00 µg/mL of the specified impurities. CONCLUSIONS: The suggested method could be considered as the first validated analytical method for the simultaneous determination of the studied components and proved to be accurate, precise, sensitive, and robust. HIGHLIGHTS: The proposed method displays a useful analytical tool for dissolution profiling and clear discrimination of both active ingredients from their impurities along with impurities profiling.

Validated Chromatographic Methods for Simultaneous Determination of Calcipotriol Monohydrate and Betamethasone Dipropionate in the Presence of Two Dosage Form Additives.

Two chromatographic methods were developed, optimized and validated for simultaneous determination of calcipotriol monohydrate (CPM) and betamethasone dipropionate (BMD) in the presence of two dosage form additives named; butylated hydroxytoluene (BHT) and alpha-tocopherol (TOCO). The proposed methods were accurate, sensitive and specific. The first method based on using aluminum thin-layer chromatographic plates precoated with silica gel GF254 as a stationary phase and chloroform-ethyl acetate-toluene (5:5:3, by volume) as a developing system. This was followed by densitometric measurement of the separated bands at 264 nm. Whereas the second method is RP-HPLC where OnyxMonolithic C18® column was used with a gradient profile using methanol, water and acetic acid at flow rate 2.0 mL min-1. Detection was carried out at 264 nm. The methods were validated according to ICH guidelines. The specificity of the developed methods was investigated by analyzing the pharmaceutical dosage form. The validity of the proposed methods was assessed using the standard addition technique. The obtained results were statistically compared with those obtained by the official methods, showing no significant difference with respect to accuracy and precision at P = 0.05.

Simultaneous determination of Fluticasone propionate and Azelastine hydrochloride in the presence of pharmaceutical dosage form additives.

Fluticasone propionate (FLU) and Azelastine hydrochloride (AZE) are co-formulated with phenylethyl alcohol (PEA) and Benzalkonium chloride (BENZ) (as preservatives) in pharmaceutical dosage form for treatment of seasonal allergies. Different spectrophotometric methods were used for the simultaneous determination of cited drugs in the dosage form. Direct spectrophotometric method was used for determining of AZE, while Derivative of double divisor of ratio spectra (DD-RS), Ratio subtraction coupled with ratio difference method (RS-RD) and Mean centering of the ratio spectra (MCR) are used for the determination of FLU. The linearity of the proposed methods was investigated in the range of 5.00-40.00 and 5.00-80.00µg/mL for FLU and AZE, respectively. The specificity of the developed methods was investigated by analyzing laboratory prepared mixtures containing different ratios of cited drugs in addition to PEA and their pharmaceutical dosage form. The validity of the proposed methods was assessed using the standard addition technique. The obtained results were statistically compared with those obtained by official or the reported method for FLU or AZE, respectively showing no significant difference with respect to accuracy and precision at p=0.05.

Advanced stability indicating chemometric methods for quantitation of amlodipine and atorvastatin in their quinary mixture with acidic degradation products.

Two advanced, accurate and precise chemometric methods are developed for the simultaneous determination of amlodipine besylate (AML) and atorvastatin calcium (ATV) in the presence of their acidic degradation products in tablet dosage forms. The first method was Partial Least Squares (PLS-1) and the second was Artificial Neural Networks (ANN). PLS was compared to ANN models with and without variable selection procedure (genetic algorithm (GA)). For proper analysis, a 5-factor 5-level experimental design was established resulting in 25 mixtures containing different ratios of the interfering species. Fifteen mixtures were used as calibration set and the other ten mixtures were used as validation set to validate the prediction ability of the suggested models. The proposed methods were successfully applied to the analysis of pharmaceutical tablets containing AML and ATV. The methods indicated the ability of the mentioned models to solve the highly overlapped spectra of the quinary mixture, yet using inexpensive and easy to handle instruments like the UV-VIS spectrophotometer.

Mean centering of double divisor ratio spectra, a novel spectrophotometric method for analysis of ternary mixtures.

A novel spectrophotometric method was developed for determination of ternary mixtures without previous separation, showing significant advantages over conventional methods. The new method is based on mean centering of double divisor ratio spectra. The mathematical explanation of the procedure is illustrated. The method was evaluated by determination of model ternary mixture and by the determination of Amlodipine (AML), Aliskiren (ALI) and Hydrochlorothiazide (HCT) in laboratory prepared mixtures and in a commercial pharmaceutical preparation. For proper presentation of the advantages and applicability of the new method, a comparative study was established between the new mean centering of double divisor ratio spectra (MCDD) and two similar methods used for analysis of ternary mixtures, namely mean centering (MC) and double divisor of ratio spectra-derivative spectrophotometry (DDRS-DS). The method was also compared with a reported one for analysis of the pharmaceutical preparation. The method was validated according to the ICH guidelines and accuracy, precision, repeatability and robustness were found to be within the acceptable limits.

Continuous Wavelet Transform, a powerful alternative to Derivative Spectrophotometry in analysis of binary and ternary mixtures: A comparative study.

A comparative study was established between two signal processing techniques showing the theoretical algorithm for each method and making a comparison between them to indicate the advantages and limitations. The methods under study are Numerical Differentiation (ND) and Continuous Wavelet Transform (CWT). These methods were studied as spectrophotometric resolution tools for simultaneous analysis of binary and ternary mixtures. To present the comparison, the two methods were applied for the resolution of Bisoprolol (BIS) and Hydrochlorothiazide (HCT) in their binary mixture and for the analysis of Amlodipine (AML), Aliskiren (ALI) and Hydrochlorothiazide (HCT) as an example for ternary mixtures. By comparing the results in laboratory prepared mixtures, it was proven that CWT technique is more efficient and advantageous in analysis of mixtures with severe overlapped spectra than ND. The CWT was applied for quantitative determination of the drugs in their pharmaceutical formulations and validated according to the ICH guidelines where accuracy, precision, repeatability and robustness were found to be within the acceptable limit.

Novel potentiometric application for the determination of pantoprazole sodium and itopride hydrochloride in their pure and combined dosage form.

Three sensitive and selective polyvinyl chloride (PVC) matrix membrane electrodes were developed and investigated. Sensor I was developed using tetraheptylammonium bromide (THB) as an anion exchanger with 2-nitrophenyl octyl ether (2-NPOE) as a plasticizer for the determination of the anionic drug pantoprazole sodium sesquihydrate (PAN). To determine the cationic drug itopride hydrochloride (ITH), two electrodes (sensors II and III) were developed using potassium tetrakis(4-chlorophenyl) borate (KTCPB) as a cation exchanger with dioctyl phthalate (DOP) as a plasticizer. Selective molecular recognition components, 2-hydroxypropyl-ß-cyclodextrin (2-HP ßCD) and 4-tert-butylcalix[8]arene (tBC8), were used as ionophores to improve the selectivity of sensors II and III, respectively. The proposed sensors had a linear dynamic range of 1×10(-5) to 1×10(-2) mol L(-1) with Nernstian slopes of -54.83±0.451, 56.90±0.300, and 51.03±1.909 mV/decade for sensors I, II and III, respectively. The Nernstian slopes were also estimated over the pH ranges of 11-13, 3.5-8 and 4-7 for the three sensors, respectively. The proposed sensors displayed useful analytical characteristics for the determination of PAN and ITH in bulk powder, in laboratory prepared mixtures and in combined dosage forms with clear discrimination from several ions, sugars and some common drug excipients. The method was validated according to ICH guidelines. Statistical comparison between the results from the proposed method and the results from the reference methods showed no significant difference regarding accuracy and precision.

Different signal processing techniques of ratio spectra for spectrophotometric resolution of binary mixture of bisoprolol and hydrochlorothiazide; a comparative study.

Five signal processing techniques were applied to ratio spectra for quantitative determination of bisoprolol (BIS) and hydrochlorothiazide (HCT) in their binary mixture. The proposed techniques are Numerical Differentiation of Ratio Spectra (ND-RS), Savitsky-Golay of Ratio Spectra (SG-RS), Continuous Wavelet Transform of Ratio Spectra (CWT-RS), Mean Centering of Ratio Spectra (MC-RS) and Discrete Fourier Transform of Ratio Spectra (DFT-RS). The linearity of the proposed methods was investigated in the range of 2-40 and 1-22 µg/mL for BIS and HCT, respectively. The proposed methods were applied successfully for the determination of the drugs in laboratory prepared mixtures and in commercial pharmaceutical preparations and standard deviation was less than 1.5. The five signal processing techniques were compared to each other and validated according to the ICH guidelines and accuracy, precision, repeatability and robustness were found to be within the acceptable limit.

Simultaneous determination of a binary mixture of pantoprazole sodium and itopride hydrochloride by four spectrophotometric methods.

Four simple, sensitive, accurate and precise spectrophotometric methods were developed for the simultaneous determination of a binary mixture containing Pantoprazole Sodium Sesquihydrate (PAN) and Itopride Hydrochloride (ITH). Method (A) is the derivative ratio method ((1)DD), method (B) is the mean centering of ratio spectra method (MCR), method (C) is the ratio difference method (RD) and method (D) is the isoabsorptive point coupled with third derivative method ((3)D). Linear correlation was obtained in range 8-44 µg/mL for PAN by the four proposed methods, 8-40 µg/mL for ITH by methods A, B and C and 10-40 µg/mL for ITH by method D. The suggested methods were validated according to ICH guidelines. The obtained results were statistically compared with those obtained by the official and a reported method for PAN and ITH, respectively, showing no significant difference with respect to accuracy and precision.

Different approaches in Partial Least Squares and Artificial Neural Network models applied for the analysis of a ternary mixture of Amlodipine, Valsartan and Hydrochlorothiazide.

Different chemometric models were applied for the quantitative analysis of Amlodipine (AML), Valsartan (VAL) and Hydrochlorothiazide (HCT) in ternary mixture, namely, Partial Least Squares (PLS) as traditional chemometric model and Artificial Neural Networks (ANN) as advanced model. PLS and ANN were applied with and without variable selection procedure (Genetic Algorithm GA) and data compression procedure (Principal Component Analysis PCA). The chemometric methods applied are PLS-1, GA-PLS, ANN, GA-ANN and PCA-ANN. The methods were used for the quantitative analysis of the drugs in raw materials and pharmaceutical dosage form via handling the UV spectral data. A 3-factor 5-level experimental design was established resulting in 25 mixtures containing different ratios of the drugs. Fifteen mixtures were used as a calibration set and the other ten mixtures were used as validation set to validate the prediction ability of the suggested methods. The validity of the proposed methods was assessed using the standard addition technique.

Comparative study between derivative spectrophotometry and multivariate calibration as analytical tools applied for the simultaneous quantitation of Amlodipine, Valsartan and Hydrochlorothiazide.

Four simple, accurate and specific methods were developed and validated for the simultaneous estimation of Amlodipine (AML), Valsartan (VAL) and Hydrochlorothiazide (HCT) in commercial tablets. The derivative spectrophotometric methods include Derivative Ratio Zero Crossing (DRZC) and Double Divisor Ratio Spectra-Derivative Spectrophotometry (DDRS-DS) methods, while the multivariate calibrations used are Principal Component Regression (PCR) and Partial Least Squares (PLSs). The proposed methods were applied successfully in the determination of the drugs in laboratory-prepared mixtures and in commercial pharmaceutical preparations. The validity of the proposed methods was assessed using the standard addition technique. The linearity of the proposed methods is investigated in the range of 2-32, 4-44 and 2-20 µg/mL for AML, VAL and HCT, respectively.

Three different methods for determination of binary mixture of Amlodipine and Atorvastatin using dual wavelength spectrophotometry.

Three simple, specific, accurate and precise spectrophotometric methods depending on the proper selection of two wavelengths are developed for the simultaneous determination of Amlodipine besylate (AML) and Atorvastatin calcium (ATV) in tablet dosage forms. The first method is the new Ratio Difference method, the second method is the Bivariate method and the third one is the Absorbance Ratio method. The calibration curve is linear over the concentration range of 4-40 and 8-32 µg/mL for AML and ATV, respectively. These methods are tested by analyzing synthetic mixtures of the above drugs and they are applied to commercial pharmaceutical preparation of the subjected drugs. Methods are validated according to the ICH guidelines and accuracy, precision, repeatability and robustness are found to be within the acceptable limit. The mathematical explanation of the procedures is illustrated.

Membrane electrodes for the determination of glutathione.

Four glutathione (GSH)-selective electrodes were developed with different techniques and in different polymeric matrices. Precipitation-based technique with bathophenanthroline-ferrous as cationic exchanger in polyvinyl chloride (PVC) matrix was used for sensor 1 fabrication. beta-Cyclodextrin (beta-CD)-based technique with either tetrakis(4-chlorophenyl)borate (TpClPB) or bathophenanthroline-ferrous as fixed anionic and cationic sites in PVC matrix was used for fabrication of sensors 2 and 3, respectively. beta-CD-based technique with TpClPB as fixed anionic site in polyurethane (Tecoflex) matrix was used for sensor 4 fabrication. Linear responses of 1x10(-5) to 1x10(-4)M and 1x10(-6) to 1x10(-3)M with slopes of 37.5 and 32.0mV/decade within pH 7-8 were obtained by using electrodes 1 and 3, respectively. On the other hand, linear responses of 1x10(-5) to 1x10(-2) and 1x10(-5) to 1x10(-3)M with slopes of 47.9 and 54.3mV/decade within pH 5-6 were obtained by using electrodes 2 and 4, respectively. The percentage recoveries for determination of GSH by the four proposed GSH-selective electrodes were 100+/-1, 100.5+/-0.7, 100+/-1 and 99.0+/-0.8% for sensors 1, 2, 3 and 4, respectively. Determination of GSH in capsules by the proposed electrodes revealed their applicability for determination of GSH in its pharmaceutical formulations. Also, they were used to determine GSH selectively in presence of its oxidized form (GSSG). Sensor 4 was successfully applied for determination of glutathione in plasma with average recovery of 100.4+/-1.11%. The proposed method was compared with a reported one. No significant difference for both accuracy and precision was observed.

Derivative spectrophotometric and fluorimetric methods for determination of rofecoxib in tablets and in human plasma in presence of its photo-degradation product.

Rofecoxib (I) has been determined in the presence of its photo-degradation product (II) using first derivative spectrophotometry ((1)D) and first derivative of the ratio spectra ((1)DD) by measuring the amplitude at 316.3 and 284 nm for (1)D and (1)DD, respectively. (I) can be determined in the presence of up to 70% and 80% of (II) by the (1)D and (1)DD, respectively. The linearity range of both the methods was the same (5.8-26.2 microg ml(-1)) with mean percentage recovery of 100.08 +/- 0.84 and 100.06 +/- 1.06 for (1)D and (1)DD, respectively. (1)D method was used to study kinetics of (I) photo-degradation that was found to follow a first-order reaction. The t(1/2) was 20.2 min while K (reaction rate constant) was 0.0336 mol min(-1). Both methods were applied to the analysis of (I) in bulk powder and in pharmaceutical formulations. Also a spectrofluorimetric method is described to determine (I) at very low concentrations (25-540 ng ml(-1)) where (I) is converted to its photo-degradate (II), which possesses a native fluorescence that could be measured. The proposed method was applied for the analysis of tablets containing rofecoxib as well as to rofecoxib-spiked human plasma.