Hydrodefluorination of Perfluorooctanoic Acid in the H2-Based Membrane Catalyst-Film Reactor with Platinum Group Metal Nanoparticles: Pathways and Optimal Conditions.

PFAAs (perfluorinated alkyl acids) have become a concern because of their widespread pollution and persistence. A previous study introduced a novel approach for removing and hydrodefluorinating perfluorooctanoic acid (PFOA) using palladium nanoparticles (Pd0NPs) in situ synthesized on H2-gas-transfer membranes. This work focuses on the products, pathways, and optimal catalyst conditions. Kinetic tests tracking PFOA removal, F- release, and hydrodefluorination intermediates documented that PFOA was hydrodefluorinated by a mixture of parallel and stepwise reactions on the Pd0NP surfaces. Slow desorption of defluorination products lowered the catalyst's activity for hydrodefluorination. Of the platinum group metals studied, Pd was overall superior to Pt, Rh, and Ru for hydrodefluorinating PFOA. pH had a strong influence on performance: PFOA was more strongly adsorbed at higher pH, but lower pH promoted defluorination. A membrane catalyst-film reactor (MCfR), containing an optimum loading of 1.2 g/m2 Pd0 for a total Pd amount of 22 mg, removed 3 mg/L PFOA during continuous flow for 90 days, and the removal flux was as high as 4 mg PFOA/m2/d at a steady state. The EPA health advisory level (70 ng/L) also was achieved over the 90 days with the influent PFOA at an environmentally relevant concentration of 500 ng/L. The results document a sustainable catalytic method for the detoxification of PFOA-contaminated water.

Adsorption and Reductive Defluorination of Perfluorooctanoic Acid over Palladium Nanoparticles.

Per- and polyfluoroalkyl substances (PFASs) comprise a group of widespread and recalcitrant contaminants that are attracting increasing concern due to their persistence and adverse health effects. This study evaluated removal of one of the most prevalent PFAS, perfluorooctanoic acid (PFOA), in H2-based membrane catalyst-film reactors (H2-MCfRs) coated with palladium nanoparticles (Pd0NPs). Batch tests documented that Pd0NPs catalyzed hydrodefluorination of PFOA to partially fluorinated and nonfluorinated octanoic acids; the first-order rate constant for PFOA removal was 0.030 h-1, and a maximum defluorination rate was 16 µM/h in our bench-scale MCfR. Continuous-flow tests achieved stable long-term depletion of PFOA to below the EPA health advisory level (70 ng/L) for up to 70 days without catalyst loss or deactivation. Two distinct mechanisms for Pd0-based PFOA removal were identified based on insights from experimental results and density functional theory (DFT) calculations: (1) nonreactive chemisorption of PFOA in a perpendicular orientation on empty metallic surface sites and (2) reactive defluorination promoted by physiosorption of PFOA in a parallel orientation above surface sites populated with activated hydrogen atoms (Hads*). Pd0-based catalytic reduction chemistry and continuous-flow treatment may be broadly applicable to the ambient-temperature destruction of other PFAS compounds.

Catalytic Antioxidant Activity of Bis-Aniline-Derived Diselenides as GPx Mimics.

Herein, we describe a simple and efficient route to access aniline-derived diselenides and evaluate their antioxidant/GPx-mimetic properties. The diselenides were obtained in good yields via ipso-substitution/reduction from the readily available 2-nitroaromatic halides (Cl, Br, I). These diselenides present GPx-mimetic properties, showing better antioxidant activity than the standard GPx-mimetic compounds, ebselen and diphenyl diselenide. DFT analysis demonstrated that the electronic properties of the substituents determine the charge delocalization and the partial charge on selenium, which correlate with the catalytic performances. The amino group concurs in the stabilization of the selenolate intermediate through a hydrogen bond with the selenium.

Synthesis of silver glyconanoparticles from new sugar-based amphiphiles and their catalytic application.

Oligosaccharide-based amphiphiles were readily prepared by click chemistry from ω-azido-hexanoic or dodecanoic acids with propargyl-functionalized maltoheptaose or xyloglucanoligosaccharides. These amphiphilic compounds were used as capping/stabilizer agents in order to obtain highly stable catalytic silver glyconanoparticles (Ag-GNPs) through the in situ reduction of silver nitrate with NaBH4. With a view to long-term storage, the stabilization was optimized using a multivariate approach, and the nanoparticles were characterized by UV-vis, TEM, SAXS, and DLS. In order to explore the functionality of the Ag-GNPs in catalysis, a full kinetic analysis of the reduction of p-nitrophenol by NaBH4 in water and in water/ethanol mixtures was performed under semi-heterogeneous and quasi-homogeneous conditions. A pseudomonomolecular surface reaction was performed, and the kinetic data obtained were treated according to the Langmuir model. The Ag-GNPs were very active, and both substrates adsorbed onto the surface of the nanoparticles. For comparison purposes, the reaction was also performed in the presence of silver-sodium dodecanoate nanoparticles, which showed catalytic activity similar to that of the glyconanoparticles, supporting the choice of the carboxyl group as the stabilizing agent, although it provided much lower temporal stability. Finally, by combining kinetic and water/ethanol surface tension data it was possible to observe the effect of the addition of the less polar solvent (ethanol) to the reaction medium.