Enhanced Codelivery of Gefitinib and Azacitidine for Treatment of Metastatic-Resistant Lung Cancer Using Biodegradable Lipid Nanoparticles.

Lung cancer is a formidable challenge in clinical practice owing to its metastatic nature and resistance to conventional treatments. The codelivery of anticancer agents offers a potential solution to overcome resistance and minimize systemic toxicity. The encapsulation of these agents within nanostructured lipid carriers (NLCs) provides a promising strategy to enhance lymphatic delivery and reduce the risk of relapse. This study aimed to develop an NLC formulation loaded with Gefitinib and Azacitidine (GEF-AZT-NLC) for the treatment of metastatic-resistant lung cancer. The physicochemical properties of the formulations were characterized, and in vitro drug release was evaluated using the dialysis bag method. The cytotoxic activity of the GEF-AZT-NLC formulations was assessed on a lung cancer cell line, and hemocompatibility was evaluated using suspended red blood cells. The prepared formulations exhibited nanoscale size (235-272 nm) and negative zeta potential values (-15 to -31 mV). In vitro study revealed that the GEF-AZT-NLC formulation retained more than 20% and 60% of GEF and AZT, respectively, at the end of the experiment. Hemocompatibility study demonstrated the safety of the formulation for therapeutic use, while cytotoxicity studies suggested that the encapsulation of both anticancer agents within NLCs could be advantageous in treating resistant cancer cells. In conclusion, the GEF-AZT-NLC formulation developed in this study holds promise as a potential therapeutic tool for treating metastatic-resistant lung cancer.

Combined Ramipril and Black Seed Oil Dosage Forms Using Bioactive Self-Nanoemulsifying Drug Delivery Systems (BIO-SNEDDSs).

Purpose: Ramipril (RMP)­an angiotensin-converting enzyme (ACE) inhibitor­and thymoquinone (THQ) suffer from poor oral bioavailability. Developing a combined liquid SNEDDS that comprises RMP and black seed oil (as a natural source of THQ) could lead to several formulations and therapeutic benefits. Methods: The present study involved comprehensive optimization of RMP/THQ liquid SNEDDS using self-emulsification assessment, equilibrium solubility studies, droplet size analysis, and experimentally designed phase diagrams. In addition, the optimized RMP/THQ SNEDDS was evaluated against pure RMP, pure THQ, and the combined pure RMP + RMP-free SNEDDS (capsule-in-capsule) dosage form via in vitro dissolution studies. Results: The phase diagram study revealed that black seed oil (BSO) showed enhanced self-emulsification efficiency with the cosolvent (Transcutol P) and hydrogenated castor oil. The phase diagram studies also revealed that the optimized formulation BSO/TCP/HCO-30 (32.25/27.75/40 % w/w) showed high apparent solubility of RMP (25.5 mg/g), good THQ content (2.7 mg/g), and nanometric (51 nm) droplet size. The in-vitro dissolution studies revealed that the optimized drug-loaded SNEDDS showed good release of RMP and THQ (up to 86% and 89%, respectively). Similarly, the isolation between RMP and SNEDDS (pure RMP + RMP-free SNEDDS) using capsule-in-capsule technology showed >84% RMP release and >82% THQ release. Conclusions: The combined pure RMP + RMP-free SNEDDS (containing black seed oil) could be a potential dosage form combining the solubilization benefits of SNEDDSs, enhancing the release of RMP/THQ along with enhancing RMP stability through its isolation from lipid-based excipients during storage.

Solubilization and thermodynamic properties of simvastatin in various micellar solutions of different non-ionic surfactants: Computational modeling and solubilization capacity.

The aim of this work was to solubilize simvastatin (SIM) using different micellar solutions of various non-ionic surfactants such as Tween-80 (T80), Tween-20 (T20), Myrj-52 (M52), Myrj-59 (M59), Brij-35 (B35) and Brij-58 (B58). The solubility of SIM in water (H2O) and different micellar concentrations of T80, T20, M52, M59, B35 and B58 was determined at temperatures T = 300.2 K to 320.2 K under atmospheric pressure p = 0.1 MPa using saturation shake flask method. The experimental solubility data of SIM was regressed using van't Hoff and Apelblat models. The solubility of SIM (mole fraction) was recorded highest in M59 (1.54 x 10-2) followed by M52 (6.56 x 10-3), B58 (5.52 x 10-3), B35 (3.97 x 10-3), T80 (1.68 x 10-3), T20 (1.16 x 10-3) [the concentration of surfactants was 20 mM in H2O in all cases] and H2O (1.94 x 10-6) at T = 320.2 K. The same results were also recorded at each temperature and each micellar concentration of T80, T20, M52, M59, B35 and B58. "Apparent thermodynamic analysis" showed endothermic and entropy-driven dissolution/solubilization of SIM in H2O and various micellar solutions of T80, T20, M52, M59, B35 and B58.

Enhancing Oral Bioavailability of Apigenin Using a Bioactive Self-Nanoemulsifying Drug Delivery System (Bio-SNEDDS): In Vitro, In Vivo and Stability Evaluations.

Apigenin (APG) is a very well-known flavonoid for its anti-inflammatory and anticancer properties. The purpose of this study is to improve the solubility and bioavailability of APG using a stable bioactive self-nanoemulsifying drug delivery system (Bio-SNEDDS). APG was incorporated in an oil phase comprising coconut oil fatty acid, Imwitor 988, Transcutol P, and HCO30 to form a Bio-SNEDDS. This preparation was characterized for morphology, particle size, and transmission electron microscopy (TEM). The APG performance was investigated in terms of loading, precipitation, release and stability tests from the optimal Bio-SNEDDS. An antimicrobial test was performed to investigate the activity of the Bio-SNEDDS against the selected strains. Bioavailability of the Bio-SNEDDS was evaluated using Wister rats against the commercial oral product and the pure drug. The results demonstrated the formation of an efficient nanosized (57 nm) Bio-SNEDDS with a drug loading of 12.50 mg/gm which is around 500-fold higher than free APG. TEM analysis revealed the formation of spherical and homogeneous nanodroplets of less than 60 nm. The dissolution rate was faster than the commercial product and was able to maintain 90% APG in gastro intestinal solution for more than 4 h. A stability study demonstrated that the Bio-SNEDDS is stable at a harsh condition. The in vivo pharmacokinetics parameters of the Bio-SNEDDS formulation in comparison to the pure drug showed a significant increase in maximum concentration (Cmax) and area under the curve (AUC (0-t)) of 105.05% and 91.32%, respectively. Moreover, the antimicrobial study revealed moderate inhibition in the bacterial growth rate. The APG-Bio-SNEDDS could serve as potential carrier aimed at improving the clinical application of APG.

Evaluation of the bioavailability of hydrocortisone when prepared as solid dispersion.

This study was conducted to formulate, characterize, and investigate the bioavailability of hydrocortisone (HCT) when prepared as solid dispersions. HCT was mixed in an organic solvent with polyethylene glycol 4000 (PEG 4000) and Kolliphor® P 407. Spray drying technique was employed to form a solid dispersion formulation at a specific ratio. Physical and chemical characterization of the formed particles were achieved using differential scanning calorimetry, scanning electron microscopy, Fourier transform infrared spectroscopy, and powder X-ray diffractometry. Furthermore, comparative in vitro and in vivo studies were conducted between the formulated particles against neat HCT. The formulated solid dispersion showed elongated particles with leaf-like structure. Formation of new chemical bonds in the formed particle was suggested due to the change in the vibrational wave numbers and the significant improvement in the bioavailability of the dispersed particles proved the importance of this technique.

UHPLC assisted simultaneous separation of apigenin and prednisolone and its application in the pharmacokinetics of apigenin.

A new ultra-high performance liquid chromatography-mass spectrometry-mass spectrometry (UHPLC-MS/MS) system has been formulated for the resolution of closely related drugs apigenin (API, a bioflavinoid) and prednisolone (PRD) from their mixture. This developed method comprised of a "BEH™ C18 column (50 mm × 2.1 mm, 1.7 µm)" using acetonitrile and 0.1% formic acid (35:65 v/v) at a supply rate of 0.25 mL·min-1 as eluent. It was found that selected eluent provided short run time (≤2.5 min) as well as better peak symmetry. Satisfactory values of chromatographic parameters such as resolution (Rs = 2.5), capacity factor (k; 13.6 and 23.4 for API and PRD respectively, selectivity (α = 1.72) and number of theoretical plates (N; 3789 and 42,435 for API and PRD respectively) indicate the efficiency of the developed method. The obtained separation was then exploited for the detection and measurement of API in rat plasma sample by means of PRD as an "internal standard" (IS). The eluted compounds in plasma were identified by tandem mass spectrometry by means of tandem quadrupole (TQ) detector ("Waters Corp., Milford, MA") fortified with an "electrospray ionisation (ESI)" source functioning in positive ionization mode. The determination of API in plasma was accomplished by means of "multiple reactions monitoring (MRM)" mode. Assortment of "ionization pairs" (m/z) was displayed in the following manner: API: 270.99 → 152.9 ("cone voltage" 57 V, "collision energy" 34 V), PRD: 403.172 → 385.224 ("cone voltage" 42 V, "collision energy" 13 V). The calibration curves followed linearity in concentration range of 05-1000 ng mL-1 with limit of detection "LOD" and limit of quantification "LOQ" of 7.30 and 22.77 ng mL-1, respectively. The developed method was validated taking into consideration various test conditions and satisfactory values of various parameters such as linearity (r2 ±â€¯SD = 0.9995 ±â€¯0.0005), interday accuracy (88-120%), interday precision % RSD = 3.30-13.65% whereas intraday accuracy (91-118%) intraday precision % RSD = 1.18-5.83) indicated its validity. The validation outcomes fulfilled the standards of united states food and drug administration "USFDA" in addition Scientific Working Group for Forensic Toxicology "SWGTOX" guiding principles and were not beyond the tolerable constraint. The process developed in plasma was efficaciously harnessed in the pharmacokinetic investigation of various formulations of API after oral administration in rats.

Dissolution and bioavailability improvement of bioactive apigenin using solid dispersions prepared by different techniques.

Apigenin (APG) is a poorly soluble bioactive compound/nutraceutical which shows poor bioavailability upon oral administration. Hence, the objective of this research work was to develop APG solid dispersions (SDs) using different techniques with the expectation to obtain improvement in its in vitro dissolution rate and in vivo bioavailability upon oral administration. Different SDs of APG were prepared by microwave, melted and kneaded technology using pluronic-F127 (PL) as a carrier. Prepared SDs were characterized using "thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), Fourier transform infra-red (FTIR) spectrometer, powder X-ray diffraction (PXRD) and scanning electron microscopy (SEM)". After characterization, prepared SDs of APG were studied for in vitro drug release/dissolution profile and in vivo pharmacokinetic studies. The results of TGA, DSC, FTIR, PXRD and SEM indicated successful formation of APG SDs. In vitro dissolution experiments suggested significant release of APG from all SDs (67.39-84.13%) in comparison with control (32.74%). Optimized SD of APG from each technology was subjected to in vivo pharmacokinetic study in rats. The results indicated significant improvement in oral absorption of APG from SD prepared using microwave and melted technology in comparison with pure drug and commercial capsule. The enhancement in oral bioavailability of APG from microwave SD (319.19%) was 3.19 fold as compared with marketed capsule (100.00%). Significant enhancement in the dissolution rate and oral absorption of APG from SD suggested that developed SD systems can be successfully used for oral drug delivery system of APG.

Evaluation of wound healing activity of henna, pomegranate and myrrh herbal ointment blend.

This study assessed the wound healing potential and antimicrobial activity of henna, pomegranate and myrrh extract formulations and their blend in excision, and dead space wound models in rats in comparison to a marketed ointment (gentamycin). The natural extracts were used in ointment formulations alone or in a combination of three extracts at a total concentration of 15% w/w in medications. The percent of wound contraction in case of henna, myrrh, pomegranate, the blend and gentamycin (10 mg/kg) were 85.90-98.5%, 88.35-99.52%, 93.55-100%, 97.30-100%, and 90.25-100% from days 16 to 20, respectively. The blended formulation showed the highest increase in the percent of wound contraction and decrease in the epithelisation period compared to other formulations and showed comparable results to the standard ointment. The histological studies of excision biopsy at day 24 showed healed skin structures with normal epithelisation, the restoration of adnexa and fibrosis within the dermis in all of the formulation- and gentamycin-treated groups while the control group lagged behind in the formation of the amount of ground substance in the granulation tissue. The formulations showed antimicrobial activity against Candida, Staphylococcus aureus, mucous membrane infections and E. coli topical infections. The study proved the wound healing potential and antimicrobial activity of the herbal extract.

Multiple response optimization of processing and formulation parameters of Eudragit RL/RS-based matrix tablets for sustained delivery of diclofenac.

CONTEXT: Multiple response optimization is an efficient technique to develop sustained release formulation while decreasing the number of experiments based on trial and error approach. OBJECTIVE: Diclofenac matrix tablets were optimized to achieve a release profile conforming to USP monograph, matching Voltaren®SR and withstand formulation variables. The percent of drug released at predetermined multiple time points were the response variables in the design. Statistical models were obtained with relative contour diagrams being overlaid to predict process and formulation parameters expected to produce the target release profile. MATERIALS AND METHODS: Tablets were prepared by wet granulation using mixture of equivalent quantities of Eudragit RL/RS at overall polymer concentration of 10-30%w/w and compressed at 5-15KN. RESULTS AND DISCUSSION: Drug release from the optimized formulation E4 (15%w/w, 15KN) was similar to Voltaren, conformed to USP monograph and found to be stable. Substituting lactose with mannitol, reversing the ratio between lactose and microcrystalline cellulose or increasing drug load showed no significant difference in drug release. Using dextromethorphan hydrobromide as a model soluble drug showed burst release due to higher solubility and formation of micro cavities. CONCLUSION: A numerical optimization technique was employed to develop a stable consistent promising formulation for sustained delivery of diclofenac.

STUDYING THE IMPACT OF FORMULATION AND PROCESSING PARAMETERS ON THE RELEASE CHARACTERISTICS FROM HYDROXYPROPYL METHYLCELLULOSE MATRIX TABLETS OF DICLOFENAC.

Hydrophilic matrices, especially HPMC based, are widely used to provide sustained delivery where drug release occurs mainly by diffusion. A 3(2) full factorial design was used to develop and evaluate HPMC matrix tablet for sustained delivery of diclofenac. The influences of polymer concentration/viscosity, diluent type/ratio, drug load/solubility, compression force and pH change on drug release were investigated. Ten tablet formulations were prepared using wet granulation. HPMC K15M (10-30% w/w) was used as the polymer forming matrix. The release kinetics, compatibility studies, lot reproducibility and effect on storage were discussed. Increasing polymer concentration and compression force showed antagonistic effect on release rate. Mannitol tends to increase release rate more than lactose. Reversing diluent ratio between lactose and MCC did not affect drug release. Changing pH resulted in burst release whereas drug solubility is pH independent. F1 showed similar release to Voltaren SR and followed Higuchi model. Drug and polymer were compatible to each other. The formulation is stable at long and intermediate conditions with a significant increase in release rate at accelerated conditions due to water uptake and polymer swelling. The developed formulation was successful for a sustained delivery of diclofenac.

Development of modified in situ gelling oral liquid sustained release formulation of dextromethorphan.

CONTEXT: Alternative strategies are being employed to develop liquid oral sustained release formulation. These included ion exchange resin, sustained release suspensions and in situ gelling systems. The later mainly utilizes alginate solutions that form gels upon contact with calcium which may be administered separately or included in the alginate solution as citrate complex. This complex liberates calcium in the stomach with subsequent gellation. The formed gel can break after gastric emptying leading to dose dumping. OBJECTIVE: Development of modified in situ gelling system which sustain dextromethorphan release in the stomach and intestine. METHODS: Solutions containing alginate with calcium chloride and sodium citrate were initially prepared to select the formulation sustaining the release in the stomach. The best formulation was combined with chitosan. All formulations were characterized with respect to flow, gelling capacity, gelling strength and drug release. RESULTS: Increasing the concentration of alginate increased the gelling capacity and strength and reduced the rate of drug release in gastric conditions with 2% w/v alginate being the best formulation. However, these formulations failed to sustain the release in the intestinal conditions. Incorporation of chitosan with alginate increased the gelling capacity and strength and reduced the rate of drug release compared to alginate only system. The effect was optimum in formulation containing 1.5% w/v chitosan. The sustained release pattern was maintained both in the gastric and intestinal conditions and was comparable to that obtained from the marketed product. CONCLUSION: Alginate-chitosan based in situ gelling system is promising for developing liquid oral sustained release.