Temperature-mortality associations by age and cause: a multi-country multi-city study.

Background: Heterogeneity in temperature-mortality relationships across locations may partly result from differences in the demographic structure of populations and their cause-specific vulnerabilities. Here we conduct the largest epidemiological study to date on the association between ambient temperature and mortality by age and cause using data from 532 cities in 33 countries. Methods: We collected daily temperature and mortality data from each country. Mortality data was provided as daily death counts within age groups from all, cardiovascular, respiratory, or noncardiorespiratory causes. We first fit quasi-Poisson regression models to estimate location-specific associations for each age-by-cause group. For each cause, we then pooled location-specific results in a dose-response multivariate meta-regression model that enabled us to estimate overall temperature-mortality curves at any age. The age analysis was limited to adults. Results: We observed high temperature effects on mortality from both cardiovascular and respiratory causes compared to noncardiorespiratory causes, with the highest cold-related risks from cardiovascular causes and the highest heat-related risks from respiratory causes. Risks generally increased with age, a pattern most consistent for cold and for nonrespiratory causes. For every cause group, risks at both temperature extremes were strongest at the oldest age (age 85 years). Excess mortality fractions were highest for cold at the oldest ages. Conclusions: There is a differential pattern of risk associated with heat and cold by cause and age; cardiorespiratory causes show stronger effects than noncardiorespiratory causes, and older adults have higher risks than younger adults.

RBP-DIP: Residual back projection with deep image prior for ill-posed CT reconstruction.

The success of deep image prior (DIP) in a number of image processing tasks has motivated their application in image reconstruction problems in computed tomography (CT). In this paper, we introduce a residual back projection technique (RBP) that improves the performance of deep image prior framework in iterative CT reconstruction, especially when the reconstruction problem is highly ill-posed. The RBP-DIP framework uses an untrained U-net in conjunction with a novel residual back projection connection to minimize the objective function while improving reconstruction accuracy. In each iteration, the weights of the untrained U-net are optimized, and the output of the U-net in the current iteration is used to update the input of the U-net in the next iteration through the proposed RBP connection. The introduction of the RBP connection strengthens the regularization effects of the DIP framework in the context of iterative CT reconstruction leading to improvements in accuracy. Our experiments demonstrate that the RBP-DIP framework offers improvements over other state-of-the-art conventional IR methods, as well as pre-trained and untrained models with similar network structures under multiple conditions. These improvements are particularly significant in the few-view and limited-angle CT reconstructions, where the corresponding inverse problems are highly ill-posed and the training data is limited. Furthermore, RBP-DIP has the potential for further improvement. Most existing IR algorithms, pre-trained models, and enhancements applicable to the original DIP algorithm can also be integrated into the RBP-DIP framework.

Comparison for the effects of different components of temperature variability on mortality: A multi-country time-series study.

BACKGROUND: Temperature variability (TV) is associated with increased mortality risk. However, it is still unknown whether intra-day or inter-day TV has different effects. OBJECTIVES: We aimed to assess the association of intra-day TV and inter-day TV with all-cause, cardiovascular, and respiratory mortality. METHODS: We collected data on total, cardiovascular, and respiratory mortality and meteorology from 758 locations in 47 countries or regions from 1972 to 2020. We defined inter-day TV as the standard deviation (SD) of daily mean temperatures across the lag interval, and intra-day TV as the average SD of minimum and maximum temperatures on each day. In the first stage, inter-day and intra-day TVs were modelled simultaneously in the quasi-Poisson time-series model for each location. In the second stage, a multi-level analysis was used to pool the location-specific estimates. RESULTS: Overall, the mortality risk due to each interquartile range [IQR] increase was higher for intra-day TV than for inter-day TV. The risk increased by 0.59% (95% confidence interval [CI]: 0.53, 0.65) for all-cause mortality, 0.64% (95% CI: 0.56, 0.73) for cardiovascular mortality, and 0.65% (95% CI: 0.49, 0.80) for respiratory mortality per IQR increase in intra-day TV0-7 (0.9 °C). An IQR increase in inter-day TV0-7 (1.6 °C) was associated with 0.22% (95% CI: 0.18, 0.26) increase in all-cause mortality, 0.44% (95% CI: 0.37, 0.50) increase in cardiovascular mortality, and 0.31% (95% CI: 0.21, 0.41) increase in respiratory mortality. The proportion of all-cause deaths attributable to intra-day TV0-7 and inter-day TV0-7 was 1.45% and 0.35%, respectively. The mortality risks varied by lag interval, climate area, season, and climate type. CONCLUSIONS: Our results indicated that intra-day TV may explain the main part of the mortality risk related to TV and suggested that comprehensive evaluations should be proposed in more countries to help protect human health.

Climatic comparison of surface urban heat island using satellite remote sensing in Tehran and suburbs.

In this study, we aim to compare the climatic conditions of Surface Urban Heat Island (SUHI) in Tehran and its suburbs using day/night time data from three satellites. A high-resolution Land Surface Temperature (LST) data from MODIS Aqua, Sentinel-3, and Landsat 8 were selected to facilitate this study. The highest values of LST/UHI are observed in downtown Tehran and suburban areas at night. The temperature difference also shows an increase at night in Tehran and the western suburbs, while it decreases during the day. When comparing LST/UHI with altitude in different directions, it is found that urban areas and the south, southeast, southwest, and west suburban areas experience higher temperatures at night. MODIS LST products are more appropriate for checking nighttime SUHI in Tehran's Great area in comparison to other products. Moran's I indicates that the highest positive values occur during seasonal and annual periods at night. The Getis index demonstrates a consistent pattern across all seasons, and this trend persists throughout the year. The seasonal and annual UHI difference between Tehran and its suburbs is 5 °C. The LST diagram reveals that higher temperatures occur during warm months. The temporal NDVI distribution indicates lower NDVI values from June to February and summer to winter. The spatial distribution shows that due to the lack of NDVI index in urban areas, LST/UHI values are higher at night in Tehran compared to the suburbs. UHI is not limited to urban areas but has also spread beyond the city borders. As a result, the highest UHI values are found in downtown Tehran and its southeast, south, southwest, and west suburbs.

Joint effect of heat and air pollution on mortality in 620 cities of 36 countries.

BACKGROUND: The epidemiological evidence on the interaction between heat and ambient air pollution on mortality is still inconsistent. OBJECTIVES: To investigate the interaction between heat and ambient air pollution on daily mortality in a large dataset of 620 cities from 36 countries. METHODS: We used daily data on all-cause mortality, air temperature, particulate matter ≤ 10 µm (PM10), PM ≤ 2.5 µm (PM2.5), nitrogen dioxide (NO2), and ozone (O3) from 620 cities in 36 countries in the period 1995-2020. We restricted the analysis to the six consecutive warmest months in each city. City-specific data were analysed with over-dispersed Poisson regression models, followed by a multilevel random-effects meta-analysis. The joint association between air temperature and air pollutants was modelled with product terms between non-linear functions for air temperature and linear functions for air pollutants. RESULTS: We analyzed 22,630,598 deaths. An increase in mean temperature from the 75th to the 99th percentile of city-specific distributions was associated with an average 8.9 % (95 % confidence interval: 7.1 %, 10.7 %) mortality increment, ranging between 5.3 % (3.8 %, 6.9 %) and 12.8 % (8.7 %, 17.0 %), when daily PM10 was equal to 10 or 90 µg/m3, respectively. Corresponding estimates when daily O3 concentrations were 40 or 160 µg/m3 were 2.9 % (1.1 %, 4.7 %) and 12.5 % (6.9 %, 18.5 %), respectively. Similarly, a 10 µg/m3 increment in PM10 was associated with a 0.54 % (0.10 %, 0.98 %) and 1.21 % (0.69 %, 1.72 %) increase in mortality when daily air temperature was set to the 1st and 99th city-specific percentiles, respectively. Corresponding mortality estimate for O3 across these temperature percentiles were 0.00 % (-0.44 %, 0.44 %) and 0.53 % (0.38 %, 0.68 %). Similar effect modification results, although slightly weaker, were found for PM2.5 and NO2. CONCLUSIONS: Suggestive evidence of effect modification between air temperature and air pollutants on mortality during the warm period was found in a global dataset of 620 cities.

Interactive effects of ambient fine particulate matter and ozone on daily mortality in 372 cities: two stage time series analysis.

OBJECTIVE: To investigate potential interactive effects of fine particulate matter (PM2.5) and ozone (O3) on daily mortality at global level. DESIGN: Two stage time series analysis. SETTING: 372 cities across 19 countries and regions. POPULATION: Daily counts of deaths from all causes, cardiovascular disease, and respiratory disease. MAIN OUTCOME MEASURE: Daily mortality data during 1994-2020. Stratified analyses by co-pollutant exposures and synergy index (>1 denotes the combined effect of pollutants is greater than individual effects) were applied to explore the interaction between PM2.5 and O3 in association with mortality. RESULTS: During the study period across the 372 cities, 19.3 million deaths were attributable to all causes, 5.3 million to cardiovascular disease, and 1.9 million to respiratory disease. The risk of total mortality for a 10 µg/m3 increment in PM2.5 (lag 0-1 days) ranged from 0.47% (95% confidence interval 0.26% to 0.67%) to 1.25% (1.02% to 1.48%) from the lowest to highest fourths of O3 concentration; and for a 10 µg/m3 increase in O3 ranged from 0.04% (-0.09% to 0.16%) to 0.29% (0.18% to 0.39%) from the lowest to highest fourths of PM2.5 concentration, with significant differences between strata (P for interaction <0.001). A significant synergistic interaction was also identified between PM2.5 and O3 for total mortality, with a synergy index of 1.93 (95% confidence interval 1.47 to 3.34). Subgroup analyses showed that interactions between PM2.5 and O3 on all three mortality endpoints were more prominent in high latitude regions and during cold seasons. CONCLUSION: The findings of this study suggest a synergistic effect of PM2.5 and O3 on total, cardiovascular, and respiratory mortality, indicating the benefit of coordinated control strategies for both pollutants.

Associations Between Extreme Temperatures and Cardiovascular Cause-Specific Mortality: Results From 27 Countries.

BACKGROUND: Cardiovascular disease is the leading cause of death worldwide. Existing studies on the association between temperatures and cardiovascular deaths have been limited in geographic zones and have generally considered associations with total cardiovascular deaths rather than cause-specific cardiovascular deaths. METHODS: We used unified data collection protocols within the Multi-Country Multi-City Collaborative Network to assemble a database of daily counts of specific cardiovascular causes of death from 567 cities in 27 countries across 5 continents in overlapping periods ranging from 1979 to 2019. City-specific daily ambient temperatures were obtained from weather stations and climate reanalysis models. To investigate cardiovascular mortality associations with extreme hot and cold temperatures, we fit case-crossover models in each city and then used a mixed-effects meta-analytic framework to pool individual city estimates. Extreme temperature percentiles were compared with the minimum mortality temperature in each location. Excess deaths were calculated for a range of extreme temperature days. RESULTS: The analyses included deaths from any cardiovascular cause (32 154 935), ischemic heart disease (11 745 880), stroke (9 351 312), heart failure (3 673 723), and arrhythmia (670 859). At extreme temperature percentiles, heat (99th percentile) and cold (1st percentile) were associated with higher risk of dying from any cardiovascular cause, ischemic heart disease, stroke, and heart failure as compared to the minimum mortality temperature, which is the temperature associated with least mortality. Across a range of extreme temperatures, hot days (above 97.5th percentile) and cold days (below 2.5th percentile) accounted for 2.2 (95% empirical CI [eCI], 2.1-2.3) and 9.1 (95% eCI, 8.9-9.2) excess deaths for every 1000 cardiovascular deaths, respectively. Heart failure was associated with the highest excess deaths proportion from extreme hot and cold days with 2.6 (95% eCI, 2.4-2.8) and 12.8 (95% eCI, 12.2-13.1) for every 1000 heart failure deaths, respectively. CONCLUSIONS: Across a large, multinational sample, exposure to extreme hot and cold temperatures was associated with a greater risk of mortality from multiple common cardiovascular conditions. The intersections between extreme temperatures and cardiovascular health need to be thoroughly characterized in the present day-and especially under a changing climate.

Sparse-view and limited-angle CT reconstruction with untrained networks and deep image prior.

BACKGROUND AND OBJECTIVE: Neural network based image reconstruction methods are becoming increasingly popular. However, limited training data and the lack of theoretical guarantees for generalizability raised concerns, especially in biomedical imaging applications. These challenges are known to lead to an unstable reconstruction process that poses significant problems in biomedical image reconstruction. In this paper, we present a new framework that uses untrained generator networks to tackle this challenge, leveraging the structure of deep networks for regularizing solutions based on a technique known as Deep Image Prior (DIP). METHODS: To achieve a high reconstruction accuracy, we propose a framework optimizing both the latent vector and the weights of a generator network during the reconstruction process. We also propose the corresponding reconstruction strategies to improve the stability and convergent performance of the proposed framework. Furthermore, instead of calculating forward projection in each iteration, we propose implementing its normal operator as a convolutional kernel under parallel beam geometry, thus greatly accelerating the calculation. RESULTS: Our experiments show that the proposed framework has significant improvements over other state-of-the-art conventional, pre-trained, and untrained methods under sparse-view, limited-angle, and low-dose conditions. CONCLUSIONS: Applying to parallel beam X-ray imaging, our framework shows advantages in speed, accuracy, and stability of the reconstruction process. We also show that the proposed framework is compatible with all differentiable regularizations that are commonly used in biomedical image reconstruction literature. Our framework can also be used as a post-processing technique to further improve the reconstruction generated by any other reconstruction methods. Furthermore, the proposed framework requires no training data and can be adjusted on-demand to adapt to different conditions (e.g. noise level, geometry, and imaged object).

Effect modification of greenness on the association between heat and mortality: A multi-city multi-country study.

BACKGROUND: Identifying how greenspace impacts the temperature-mortality relationship in urban environments is crucial, especially given climate change and rapid urbanization. However, the effect modification of greenspace on heat-related mortality has been typically focused on a localized area or single country. This study examined the heat-mortality relationship among different greenspace levels in a global setting. METHODS: We collected daily ambient temperature and mortality data for 452 locations in 24 countries and used Enhanced Vegetation Index (EVI) as the greenspace measurement. We used distributed lag non-linear model to estimate the heat-mortality relationship in each city and the estimates were pooled adjusting for city-specific average temperature, city-specific temperature range, city-specific population density, and gross domestic product (GDP). The effect modification of greenspace was evaluated by comparing the heat-related mortality risk for different greenspace groups (low, medium, and high), which were divided into terciles among 452 locations. FINDINGS: Cities with high greenspace value had the lowest heat-mortality relative risk of 1·19 (95% CI: 1·13, 1·25), while the heat-related relative risk was 1·46 (95% CI: 1·31, 1·62) for cities with low greenspace when comparing the 99th temperature and the minimum mortality temperature. A 20% increase of greenspace is associated with a 9·02% (95% CI: 8·88, 9·16) decrease in the heat-related attributable fraction, and if this association is causal (which is not within the scope of this study to assess), such a reduction could save approximately 933 excess deaths per year in 24 countries. INTERPRETATION: Our findings can inform communities on the potential health benefits of greenspaces in the urban environment and mitigation measures regarding the impacts of climate change. FUNDING: This publication was developed under Assistance Agreement No. RD83587101 awarded by the U.S. Environmental Protection Agency to Yale University. It has not been formally reviewed by EPA. The views expressed in this document are solely those of the authors and do not necessarily reflect those of the Agency. EPA does not endorse any products or commercial services mentioned in this publication. Research reported in this publication was also supported by the National Institute on Minority Health and Health Disparities of the National Institutes of Health under Award Number R01MD012769. The content is solely the responsibility of the authors and does not necessarily represent the official views of the National Institutes of Health. Also, this work has been supported by the National Research Foundation of Korea (2021R1A6A3A03038675), Medical Research Council-UK (MR/V034162/1 and MR/R013349/1), Natural Environment Research Council UK (Grant ID: NE/R009384/1), Academy of Finland (Grant ID: 310372), European Union's Horizon 2020 Project Exhaustion (Grant ID: 820655 and 874990), Czech Science Foundation (22-24920S), Emory University's NIEHS-funded HERCULES Center (Grant ID: P30ES019776), and Grant CEX2018-000794-S funded by MCIN/AEI/ 10.13039/501100011033 The funders had no role in the design, data collection, analysis, interpretation of results, manuscript writing, or decision to publication.

Global, regional, and national burden of mortality associated with short-term temperature variability from 2000-19: a three-stage modelling study.

BACKGROUND: Increased mortality risk is associated with short-term temperature variability. However, to our knowledge, there has been no comprehensive assessment of the temperature variability-related mortality burden worldwide. In this study, using data from the MCC Collaborative Research Network, we first explored the association between temperature variability and mortality across 43 countries or regions. Then, to provide a more comprehensive picture of the global burden of mortality associated with temperature variability, global gridded temperature data with a resolution of 0·5°â€ˆ× 0·5° were used to assess the temperature variability-related mortality burden at the global, regional, and national levels. Furthermore, temporal trends in temperature variability-related mortality burden were also explored from 2000-19. METHODS: In this modelling study, we applied a three-stage meta-analytical approach to assess the global temperature variability-related mortality burden at a spatial resolution of 0·5°â€ˆ× 0·5° from 2000-19. Temperature variability was calculated as the SD of the average of the same and previous days' minimum and maximum temperatures. We first obtained location-specific temperature variability related-mortality associations based on a daily time series of 750 locations from the Multi-country Multi-city Collaborative Research Network. We subsequently constructed a multivariable meta-regression model with five predictors to estimate grid-specific temperature variability related-mortality associations across the globe. Finally, percentage excess in mortality and excess mortality rate were calculated to quantify the temperature variability-related mortality burden and to further explore its temporal trend over two decades. FINDINGS: An increasing trend in temperature variability was identified at the global level from 2000 to 2019. Globally, 1 753 392 deaths (95% CI 1 159 901-2 357 718) were associated with temperature variability per year, accounting for 3·4% (2·2-4·6) of all deaths. Most of Asia, Australia, and New Zealand were observed to have a higher percentage excess in mortality than the global mean. Globally, the percentage excess in mortality increased by about 4·6% (3·7-5·3) per decade. The largest increase occurred in Australia and New Zealand (7·3%, 95% CI 4·3-10·4), followed by Europe (4·4%, 2·2-5·6) and Africa (3·3, 1·9-4·6). INTERPRETATION: Globally, a substantial mortality burden was associated with temperature variability, showing geographical heterogeneity and a slightly increasing temporal trend. Our findings could assist in raising public awareness and improving the understanding of the health impacts of temperature variability. FUNDING: Australian Research Council, Australian National Health & Medical Research Council.

Fluctuating temperature modifies heat-mortality association around the globe.

Studies have investigated the effects of heat and temperature variability (TV) on mortality. However, few assessed whether TV modifies the heat-mortality association. Data on daily temperature and mortality in the warm season were collected from 717 locations across 36 countries. TV was calculated as the standard deviation of the average of the same and previous days' minimum and maximum temperatures. We used location-specific quasi-Poisson regression models with an interaction term between the cross-basis term for mean temperature and quartiles of TV to obtain heat-mortality associations under each quartile of TV, and then pooled estimates at the country, regional, and global levels. Results show the increased risk in heat-related mortality with increments in TV, accounting for 0.70% (95% confidence interval [CI]: -0.33 to 1.69), 1.34% (95% CI: -0.14 to 2.73), 1.99% (95% CI: 0.29-3.57), and 2.73% (95% CI: 0.76-4.50) of total deaths for Q1-Q4 (first quartile-fourth quartile) of TV. The modification effects of TV varied geographically. Central Europe had the highest attributable fractions (AFs), corresponding to 7.68% (95% CI: 5.25-9.89) of total deaths for Q4 of TV, while the lowest AFs were observed in North America, with the values for Q4 of 1.74% (95% CI: -0.09 to 3.39). TV had a significant modification effect on the heat-mortality association, causing a higher heat-related mortality burden with increments of TV. Implementing targeted strategies against heat exposure and fluctuant temperatures simultaneously would benefit public health.

Exact gram filtering and efficient backprojection for iterative CT reconstruction.

PURPOSE: Forward and backprojections are the basis of all model-based iterative reconstruction (MBIR) methods. However, computing these accurately is time-consuming. In this paper, we present a method for MBIR in parallel X-ray beam geometry that utilizes a Gram filter to efficiently implement forward and backprojection. METHODS: We propose using voxel-basis and modeling its footprint in a box spline framework to calculate the Gram filter exactly and improve the performance of backprojection. In the special case of parallel X-ray beam geometry, the forward and backprojection can be implemented by an estimated Gram filter efficiently if the sinogram signal is bandlimited. In this paper, a specialized sinogram interpolation method is proposed to eliminate the bandlimited prerequisite and thus improve the reconstruction accuracy. We build on this idea by utilizing the continuity of the voxel-basis' footprint, which provides a more accurate sinogram interpolation and further improves the efficiency and quality of backprojection. In addition, the detector blur effect can be efficiently accounted for in our method to better handle realistic scenarios. RESULTS: The proposed method is tested on both phantom and real computed tomography (CT) images under different resolutions, sinogram sampling steps, and noise levels. The proposed method consistently outperforms other state-of-the-art projection models in terms of speed and accuracy for both backprojection and reconstruction. CONCLUSIONS: We proposed a iterative reconstruction methodology for 3D parallel-beam X-ray CT reconstruction. Our experimental results demonstrate that the proposed methodology is accurate, fast, and reproducible, and outperforms alternative state-of-the-art projection models on both backprojection and reconstruction results significantly.

Geographical Variations of the Minimum Mortality Temperature at a Global Scale: A Multicountry Study.

BACKGROUND: Minimum mortality temperature (MMT) is an important indicator to assess the temperature-mortality association, indicating long-term adaptation to local climate. Limited evidence about the geographical variability of the MMT is available at a global scale. METHODS: We collected data from 658 communities in 43 countries under different climates. We estimated temperature-mortality associations to derive the MMT for each community using Poisson regression with distributed lag nonlinear models. We investigated the variation in MMT by climatic zone using a mixed-effects meta-analysis and explored the association with climatic and socioeconomic indicators. RESULTS: The geographical distribution of MMTs varied considerably by country between 14.2 and 31.1 °C decreasing by latitude. For climatic zones, the MMTs increased from alpine (13.0 °C) to continental (19.3 °C), temperate (21.7 °C), arid (24.5 °C), and tropical (26.5 °C). The MMT percentiles (MMTPs) corresponding to the MMTs decreased from temperate (79.5th) to continental (75.4th), arid (68.0th), tropical (58.5th), and alpine (41.4th). The MMTs indreased by 0.8 °C for a 1 °C rise in a community's annual mean temperature, and by 1 °C for a 1 °C rise in its SD. While the MMTP decreased by 0.3 centile points for a 1 °C rise in a community's annual mean temperature and by 1.3 for a 1 °C rise in its SD. CONCLUSIONS: The geographical distribution of the MMTs and MMTPs is driven mainly by the mean annual temperature, which seems to be a valuable indicator of overall adaptation across populations. Our results suggest that populations have adapted to the average temperature, although there is still more room for adaptation.

Mortality risk attributable to wildfire-related PM2·5 pollution: a global time series study in 749 locations.

BACKGROUND: Many regions of the world are now facing more frequent and unprecedentedly large wildfires. However, the association between wildfire-related PM2·5 and mortality has not been well characterised. We aimed to comprehensively assess the association between short-term exposure to wildfire-related PM2·5 and mortality across various regions of the world. METHODS: For this time series study, data on daily counts of deaths for all causes, cardiovascular causes, and respiratory causes were collected from 749 cities in 43 countries and regions during 2000-16. Daily concentrations of wildfire-related PM2·5 were estimated using the three-dimensional chemical transport model GEOS-Chem at a 0·25°â€ˆ× 0·25° resolution. The association between wildfire-related PM2·5 exposure and mortality was examined using a quasi-Poisson time series model in each city considering both the current-day and lag effects, and the effect estimates were then pooled using a random-effects meta-analysis. Based on these pooled effect estimates, the population attributable fraction and relative risk (RR) of annual mortality due to acute wildfire-related PM2·5 exposure was calculated. FINDINGS: 65·6 million all-cause deaths, 15·1 million cardiovascular deaths, and 6·8 million respiratory deaths were included in our analyses. The pooled RRs of mortality associated with each 10 µg/m3 increase in the 3-day moving average (lag 0-2 days) of wildfire-related PM2·5 exposure were 1·019 (95% CI 1·016-1·022) for all-cause mortality, 1·017 (1·012-1·021) for cardiovascular mortality, and 1·019 (1·013-1·025) for respiratory mortality. Overall, 0·62% (95% CI 0·48-0·75) of all-cause deaths, 0·55% (0·43-0·67) of cardiovascular deaths, and 0·64% (0·50-0·78) of respiratory deaths were annually attributable to the acute impacts of wildfire-related PM2·5 exposure during the study period. INTERPRETATION: Short-term exposure to wildfire-related PM2·5 was associated with increased risk of mortality. Urgent action is needed to reduce health risks from the increasing wildfires. FUNDING: Australian Research Council, Australian National Health & Medical Research Council.

Global, regional, and national burden of mortality associated with non-optimal ambient temperatures from 2000 to 2019: a three-stage modelling study.

BACKGROUND: Exposure to cold or hot temperatures is associated with premature deaths. We aimed to evaluate the global, regional, and national mortality burden associated with non-optimal ambient temperatures. METHODS: In this modelling study, we collected time-series data on mortality and ambient temperatures from 750 locations in 43 countries and five meta-predictors at a grid size of 0·5°â€ˆ× 0·5° across the globe. A three-stage analysis strategy was used. First, the temperature-mortality association was fitted for each location by use of a time-series regression. Second, a multivariate meta-regression model was built between location-specific estimates and meta-predictors. Finally, the grid-specific temperature-mortality association between 2000 and 2019 was predicted by use of the fitted meta-regression and the grid-specific meta-predictors. Excess deaths due to non-optimal temperatures, the ratio between annual excess deaths and all deaths of a year (the excess death ratio), and the death rate per 100 000 residents were then calculated for each grid across the world. Grids were divided according to regional groupings of the UN Statistics Division. FINDINGS: Globally, 5 083 173 deaths (95% empirical CI [eCI] 4 087 967-5 965 520) were associated with non-optimal temperatures per year, accounting for 9·43% (95% eCI 7·58-11·07) of all deaths (8·52% [6·19-10·47] were cold-related and 0·91% [0·56-1·36] were heat-related). There were 74 temperature-related excess deaths per 100 000 residents (95% eCI 60-87). The mortality burden varied geographically. Of all excess deaths, 2 617 322 (51·49%) occurred in Asia. Eastern Europe had the highest heat-related excess death rate and Sub-Saharan Africa had the highest cold-related excess death rate. From 2000-03 to 2016-19, the global cold-related excess death ratio changed by -0·51 percentage points (95% eCI -0·61 to -0·42) and the global heat-related excess death ratio increased by 0·21 percentage points (0·13-0·31), leading to a net reduction in the overall ratio. The largest decline in overall excess death ratio occurred in South-eastern Asia, whereas excess death ratio fluctuated in Southern Asia and Europe. INTERPRETATION: Non-optimal temperatures are associated with a substantial mortality burden, which varies spatiotemporally. Our findings will benefit international, national, and local communities in developing preparedness and prevention strategies to reduce weather-related impacts immediately and under climate change scenarios. FUNDING: Australian Research Council and the Australian National Health and Medical Research Council.

Direct Volume Rendering with Nonparametric Models of Uncertainty.

We present a nonparametric statistical framework for the quantification, analysis, and propagation of data uncertainty in direct volume rendering (DVR). The state-of-the-art statistical DVR framework allows for preserving the transfer function (TF) of the ground truth function when visualizing uncertain data; however, the existing framework is restricted to parametric models of uncertainty. In this paper, we address the limitations of the existing DVR framework by extending the DVR framework for nonparametric distributions. We exploit the quantile interpolation technique to derive probability distributions representing uncertainty in viewing-ray sample intensities in closed form, which allows for accurate and efficient computation. We evaluate our proposed nonparametric statistical models through qualitative and quantitative comparisons with the mean-field and parametric statistical models, such as uniform and Gaussian, as well as Gaussian mixtures. In addition, we present an extension of the state-of-the-art rendering parametric framework to 2D TFs for improved DVR classifications. We show the applicability of our uncertainty quantification framework to ensemble, downsampled, and bivariate versions of scalar field datasets.

Exposure to suboptimal ambient temperature during specific gestational periods and adverse outcomes in mice.

Exposure to suboptimal ambient temperature during pregnancy has been reported as a potential teratogen of fetal development. However, limited animal evidence is available regarding the impact of extreme temperatures on maternal pregnancy and the subsequent adverse pregnancy outcomes. Our objective in this study is to investigate the relationship between temperature and maternal stress during pregnancy in mice. This study used the Naval Medical Research Institute (NMRI) mice during the second and third pregnant weeks with the gestational day (GD) (GD 6.5-14.5 and GD 14.5-17.5). Mice were exposed to suboptimal ambient temperature (1 °C, 5 °C, 10 °C, 15 °C, 40 °C, 42 °C, 44 °C, 46 °C, and 48 °C for the experimental group and 23 °C for the control group) 1 h per day, 7 days a weekin each trimester. Measurements of placental development (placental weight [PW] and placental diameter [PD]) and fetal growth (fetal weight [FW] and crown-to-rump length [CRL]) between experimental and control groups were compared using analysis of variance (ANOVA). Data on the occurrence of preterm birth (PTB) and abnormalities were also collected. The results showed that exposure to both cold and heat stress in the second and third weeks of pregnancy caused significant decreases in measurements of placental development (PW and PD) and fetal growth (FW and CRL). For all temperature exposures, 15 °C was identified as the optimal temperature in the development of the embryo. Most PTB occurrences were observed in high-temperature stress groups, with the highest PTB number seen in the exposure group at 48 °C, whereas PTB occurred only at 1 °C among cold stress groups. In the selected exposure experiments, an approximate U-shaped relation was observed between temperature and number of abnormality occurrence. The highest percentage of these anomalies occurred at temperatures of 1 °C and 48 °C, while no abnormalities were observed at 15 °C and in the control group. Our findings strengthened the evidence that exposure to suboptimal ambient temperatures may trigger adverse pregnancy outcomes and worsen embryo and fetal development in mice.

Utilizing daily excessive concentration hours to estimate cardiovascular mortality and years of life lost attributable to fine particulate matter in Tehran, Iran.

BACKGROUND: Evidence for associations between fine particulate matter (PM2.5) and cardiovascular diseases (CVDs) in Iran is scarce. Given large within-day variations of PM2.5 concentration, using the daily mean of PM2.5 (PM2.5mean) as exposure metric might bias the health-related assessment. This study applied a novel indicator, daily excessive concentration hours (DECH), to evaluate the effect of ambient PM2.5 on CVD mortality and years of life lost (YLL) in Tehran, the capital city of Iran. METHODS: Hourly concentration data for PM2.5, daily information for meteorology and records of registered cardiovascular deaths from 2012 to 2016 were obtained from Tehran, Iran. Daily excessive concentration hours of PM2.5 (PM2.5DECH) was defined as daily total concentration-hours exceeding 35 µg/m3. Using a time-series design, we applied generalized linear models to assess the attributable effects of PM2.5DECH and PM2.5mean on CVD mortality and YLL. RESULTS: For an interquartile range (IQR) rise in PM2.5DECH, total CVD mortality at lag 0-10 days and YLL at lag 0-8 days increased 2.26% (95% confidence interval (CI): 0.85-3.69%) and 23.24 (6.07-40.42) person years, respectively. Corresponding increases were 3.45% (1.44-5.49%) and 35.21 (10.85-59.58) person years for an IQR rise in PM2.5mean. Significant associations between PM2.5 pollution (i.e., PM2.5mean and PM2.5DECH) and cause-specific cardiovascular health (i.e., mortality and YLL) were only identified in stroke. Subgroup analyses showed that male and people aged 0-64 years suffered more from PM2.5 pollution. Furthermore, we attributed a greater CVD burden to PM2.5DECH (1.67% for mortality and 2.67% for YLL) than PM2.5mean (0.63% for mortality and 0.70% for YLL) during the study period. CONCLUSIONS: This study strengthened the evidence for the aggravated CVD mortality burden associated with short-term exposure to PM2.5. Our findings also suggested that PM2.5DECH might be a potential alternative indicator of exposure assessment in PM2.5-related health investigations.