Phosphorus and nitrogen-containing soybean oil polyols: Effect on the mechanical properties and flame retardancy of polyurethane foam.

In recent years, there has been an increasing interest in producing new materials that use renewable resources and halogen-free flame retardants with nonleaching properties. This research focuses on designing and synthesizing phosphorus-nitrogen-based biopolyols for use in polyurethane (PU) foam production. Polyol (ESBO-DYM) with dual functionalities, renewability, and nonflammability is synthesized through the epoxy ring-opening reaction of epoxidized soybean oil with phosphorus and nitrogen-containing tetraol products (DYM). The mechanical and flame retardant properties of PU foams with the addition of an ESBO-DYM were investigated. Increasing the amount of phosphorus in the PU foams increased the thermal stability properties. Using 100% ESBO-DYM as a polyol in the foam formulation increased the limiting oxygen index (LOI) value to 22.9% and resulted in the highest char yield according to the thermal gravimetric analysis (17% at 600 °C). Additionally, the introduction of ESBO-DYM polyol into the formulation resulted in a decrease in the compression strength of the foams. The foam density decreased as the amount of ESBO-DYM polyol in the formulation increased. The foam with the highest amount of ESBO-DYM had a foam density of 29.1 kg/m3. The morphology of the foams was characterized using a scanning electron microscope (SEM). As a result of this study, flame retardant polyurethane foams were formulated using a renewable source, polyol, along with commercial compounds.

Synthesis of silane- and quaternary ammonium-bearing copolymers and application as a coating resin on cotton fabric.

In this study, silane and quaternary ammonium functional methacrylate monomers were synthesized and used to construct a copolymer using an emulsion polymerization technique to control the reaction rate. The copolymer was then designed using different ratios of silane and quaternary ammonium groups to investigate the relationship between the structure and properties. The presence of the ethoxy silane group in the copolymer series provided covalent bonding through the silanol group onto cotton fabric. The presence of cationic groups also helped to cover the fabric surface. After coating the cotton textile fabric, the resistance of the dye on the fabric surface to friction was assessed and tests were conducted on washing, rubbing, water, and light fastness. Finally, the textile surfaces were investigated for their antibacterial activity against Staphylococcus aureus and Escherichia coli. It was observed that the copolymer series showed >99% killing efficiency against S. aureus but had no effect on E. coli.