Electrical Resistivity of 3D-Printed Polymer Elements.

During this study, the resistivity of electrically conductive structures 3D-printed via fused filament fabrication (FFF) was investigated. Electrical resistivity characterisation was performed on various structural levels of the whole 3D-printed body, starting from the single traxel (3D-printed single track element), continuing with monolayer and multilayer formation, finalising with hybrid structures of a basic nonconductive polymer and an electrically conductive one. Two commercial conductive materials were studied: Proto-Pasta and Koltron G1. It was determined that the geometry and resistivity of a single traxel influenced the resistivity of all subsequent structural elements of the printed body and affected its electrical anisotropy. In addition, the results showed that thermal postprocessing (annealing) affected the resistivity of a standalone extruded fibre (extruded filament through a printer nozzle in freefall) and traxel. The effect of Joule heating and piezoresistive properties of hybrid structures with imprinted conductive elements made from Koltron G1 were investigated. Results revealed good thermal stability within 70 °C and considerable piezoresistive response with a gauge factor of 15-25 at both low 0.1% and medium 1.5% elongations, indicating the potential of such structures for use as a heat element and strain gauge sensor in applications involving stiff materials and low elongations.

The synthesis of matrices of embedded semiconducting nanowires.

In this work we report how single crystal nanowires can be assembled into regular arrays using mesoporous thin films to define the architecture. Mesoporous thin films were prepared by a sol-gel method. These provide films of very regular structure and dimensions. The films produced in this way have almost single crystal like structures and can also exhibit strong epitaxy to the underlying silicon substrate. The films are subjected to a supercritical fluid (SCF) environment in which a precursor is decomposed to yield nanowires of metals, semiconductors or oxides. Using these SCF conditions, pore filling is complete and the products are nanowires which are single crystals and structurally aligned in one direction. The growth mechanism of the nanowires is described and size effects discussed.