Synthesis and Cytotoxicity Studies of Br-Substituted Salphen Organic Compounds.

We present the synthesis and characterization of organic Salphen compounds containing bromine substituents at the para/ortho-para positions, in their symmetric and non-symmetric versions, and describe the X-ray structure and full characterization for the new unsymmetrical varieties. We report for the first time antiproliferative activity in metal-free brominated Salphen compounds, by evaluations in four human cancer cell lines, cervix (HeLa), prostate (PC-3), lung (A549) and colon (LS 180) and one non-cancerous counterpart (ARPE-19). We assessed in vitro cell viability against controls using the MTT assay ((3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl-2H-tetrazolium bromide)) and determined the concentration required for 50 % growth inhibition (IC50 ), together with their selectivity vs. non-cancerous cells. We found promising results against prostate (9.6 µM) and colon (13.5 µM) adenocarcinoma cells. We also found a tradeoff between selectivity (up to 3-fold vs. ARPE-19) and inhibition, depending upon the symmetry and bromine-substitution of the molecules, showing up to 20-fold higher selectivity vs. doxorubicin controls.

Enhanced Host-Guest Association and Fluorescence in Copolymers from Copper Salphen Complexes by Supramolecular Internalization of Anions.

Invited for this month's cover are Prof. Escárcega-Bobadilla and Prof. Zelada-Guillén, collaborators from the National Autonomous University of Mexico (UNAM). The cover picture shows the X-ray structure of a chartreuse fluorescent Salphen-Cu complex that upon copolymerization receives dielectric protection from the rest of the chain in solution. This enables cyan luminescence at higher intensity via anion-guest engulfment which renders dimmer-like turn-on emission. More information can be found in the Research Article by G. Zelada-Guillén, M. V. Escárcega-Bobadilla, and co-workers.

Enhanced Host-Guest Association and Fluorescence in Copolymers from Copper Salphen Complexes by Supramolecular Internalization of Anions.

We describe the synthesis, crystallographic characterization of a new Cu-Salphen compound and its use as a host Lewis-acid against guest anions in two versions: a) free molecule, b) copolymerized with methyl methacrylate:n-butyl acrylate (1 : 4-wt.) as protective co-monomers. Higher contents in Cu-Salphen yielded larger and more homogeneous polymer sizes. Polymer size together with glass transitions, heat capacity, thermal degradation, guest-saturation degrees and host-guest species distribution profiles from spectrophotometric titrations explained growths of up to 630-fold in K11 and 180000-fold in K12 for the host's binding site attributable to a solvophobic protection from the macromolecular structure. Spectrofluorimetry revealed blue-shifted×13-16 larger luminescence for Cu-Salphen in the polymers (λem =488-498 nm) than that of the non-polymerized counterpart (λem =510-543 nm) and "turn-on" blue-shifted enhanced fluorescence upon guest association. We propose a cooperative incorporation of the guests occurring from the outer medium toward internally protected binding site pockets in the random coil polymer conformations.

Turing patterns by supramolecular self-assembly of a single salphen building block.

In the 1950s, Alan Turing showed that concerted reactions and diffusion of activating and inhibiting chemical species can autonomously generate patterns without previous positional information, thus providing a chemical basis for morphogenesis in Nature. However, access to these patterns from only one molecular component that contained all the necessary information to execute agonistic and antagonistic signaling is so far an elusive goal, since two or more participants with different diffusivities are a must. Here, we report on a single-molecule system that generates Turing patterns arrested in the solid state, where supramolecular interactions are used instead of chemical reactions, whereas diffusional differences arise from heterogeneously populated self-assembled products. We employ a family of hydroxylated organic salphen building blocks based on a bis-Schiff-base scaffold with portions responsible for either activation or inhibition of assemblies at different hierarchies through purely supramolecular reactions, only depending upon the solvent dielectric constant and evaporation as fuel.

Acrylic Polymers Containing a Nickel Salphen Complex: An Approach to Supramolecular and Macromolecular Systems.

Invited for this month's cover are Prof. Martha Escárcega-Bobadilla and Prof. Gustavo Zelada-Guillén, collaborators from the National Autonomous University of Mexico (UNAM). The cover picture shows the structure of a polymerizable Ni-Salphen complex, determined by X-ray crystallography, where the Ni center displays 1:1 and 1:2 host-guest stoichiometries toward anions, both coexisting in solution. Read the full text of the article at 10.1002/cplu.202000471.

Acrylic Polymers Containing a Nickel Salphen Complex: An Approach to Supramolecular and Macromolecular Systems.

The synthesis, characterization and crystallographic analysis is reported of a new Nickel Salphen complex and its radical copolymerization with n-butyl acrylate and methyl methacrylate to produce novel host macromolecules with tunable association against guest anions. Spectrophotometric titrations of the complex and of the polymers revealed that a supramolecular regulation of guest-binding accessibility was enabled by the number of Ni-Salphen units per chain. The latter content in turn, determined the chain size and molecular weight uniformity upon polymerization, and likely increased the strength in interchain/intrachain non-covalent interactions over the nickel center and the acrylic domains. The study also showed that incorporation of the monomer into the acrylic polymer backbone opened the possibility for the nickel binding site to gain access to host:guest stoichiometric discrimination, switching from 1 : 1 (major) and 1 : 2 (minor) both coexisting for the host when in the free form, to mostly 1 : 2 when in the polymerized version.

Control of pH-Responsiveness in Graphene Oxide Grafted with Poly-DEAEMA via Tailored Functionalization.

Polymer-grafted nanomaterials based on carbon allotropes and their derivatives (graphene oxide (GO), etc.) are typically prepared by successive reaction stages that depend upon the initial functionalities in the nanostructure and the polymerization type needed for grafting. However, due to the multiple variables involved in the functionalization steps, it is commonly difficult to predict the properties in the final product and to correlate the material history with its final performance. In this work, we explored the steps needed to graft the carboxylic acid moieties in GO (COOH@GO) with a pH-sensitive polymer, poly[2-(diethylamino)ethyl methacrylate] (poly[DEAEMA]), varying the reactant ratios at each stage prior to polymerization. We studied the combinatorial relationship between these variables and the behavior of the novel grafted material GO-g-poly[DEAEMA], in terms of swelling ratio vs. pH (%Q) in solid specimens and potentiometric response vs. Log[H+] in a solid-state sensor format. We first introduced N-hydroxysuccinimide (NHS)-ester moieties at the -COOH groups (GO-g-NHS) by a classical activation with N-ethyl-N'-(3-dimethylaminopropyl)carbodiimide (EDC). Then, we substituted the NHS-ester groups by polymerizable amide-linked acrylic moieties using 2-aminoethyl methacrylate (AEMA) at different ratios to finally introduce the polymer chains via radical polymerization in an excess of DEAEMA monomer. We found correlated trends in swelling pH range, interval of maximum and minimum swelling values, response in potentiometry and potentiometric linear range vs. Log[H+] and could establish their relationship with the combinatorial stoichiometries in synthetic stages.

Synthesis of a Novel Zn-Salphen Building Block and Its Acrylic Terpolymer Counterparts as Tunable Supramolecular Recognition Systems.

In this work, we present the synthesis of a novel Zn-Salphen complex containing an allyl group, which was used as building block in the further preparation of a new family of functional terpolymers. These polymers were obtained through radical co-polymerization with methyl metacrylate (MMA) and n-butyl acrylate (nBuA) in different ratios. The supramolecular recognition behavior of each polymer was evaluated via potentiometric measurements against selected anions in aqueous media. Interestingly, this proof of concept study shows that these systems were selective against only fluoride (F-) or both, fluoride and acetate (OAc-), by tailoring the relative content of Zn-Salphen monomer, thus making them a promising starting point for modular design of chemical sensors through straightforward synthetic approaches.

Grafting Multiwalled Carbon Nanotubes with Polystyrene to Enable Self-Assembly and Anisotropic Patchiness.

We demonstrate a straightforward protocol to graft pristine multiwalled carbon nanotubes (MWCNTs) with polystyrene (PS) chains at the sidewalls through a free-radical polymerization strategy to enable the modulation of the nanotube surface properties and produce supramolecular self-assembly of the nanostructures. First, a selective hydroxylation of the pristine nanotubes through a biphasic catalytically mediated oxidation reaction creates superficially distributed reactive sites at the sidewalls. The latter reactive sites are subsequently modified with methacrylic moieties using a silylated methacrylic precursor to create polymerizable sites. Those polymerizable groups can address further polymerization of styrene to produce a hybrid nanomaterial containing PS chains grafted to the nanotube sidewalls. The polymer-graft content, amount of silylated methacrylic moieties introduced and hydroxylation modification of the nanotubes are identified and quantified by Thermogravimetric Analysis (TGA). The presence of reactive functional groups hydroxyl and silylated methacrylate are confirmed by Fourier Transform Infrared Spectroscopy (FT-IR). Polystyrene-grafted carbon nanotube solutions in tetrahydrofuran (THF) provide wall-to-wall collinearly self-assembled nanotubes when cast samples are analyzed by transmission electron microscopy (TEM). Those self-assemblies are not obtained when suitable blanks are similarly cast from analogous solutions containing non-grafted counterparts. Therefore, this method enables the modification of the nanotube anisotropic patchiness at the sidewalls which results into spontaneous auto-organization at the nanoscale.

Nanorings and rods interconnected by self-assembly mimicking an artificial network of neurons.

Molecular electronics based on structures ordered as neural networks emerges as the next evolutionary milestone in the construction of nanodevices with unprecedented applications. However, the straightforward formation of geometrically defined and interconnected nanostructures is crucial for the production of electronic circuitry nanoequivalents. Here we report on the molecularly fine-tuned self-assembly of tetrakis-Schiff base compounds into nanosized rings interconnected by unusually large nanorods providing a set of connections that mimic a biological network of neurons. The networks are produced through self-assembly resulting from the molecular conformation and noncovalent intermolecular interactions. These features can be easily generated on flat surfaces and in a polymeric matrix by casting from solution under ambient conditions. The structures can be used to guide the position of electron-transporting agents such as carbon nanotubes on a surface or in a polymer matrix to create electrically conducting networks that can find direct use in constructing nanoelectronic circuits.

Supramolecular bulky phosphines comprising 1,3,5-triaza-7-phosphaadamantane and Zn(salphen)s: structural features and application in hydrosilylation catalysis.

The use of the commercially available, bifunctional phosphine 1,3,5-triaza-7-phosphaadamantane (abbreviated as PN3) in conjunction with a series of Zn(salphen) complexes leads to sterically encumbered phosphine ligands as a result of (reversible) coordinative Zn-N interactions. The solid state and solution phase behaviour of these supramolecular ligand systems have been investigated in detail and revealed their stoichiometries in the solid state observed by X-ray crystallography, and those determined in solution by NMR and UV-Vis spectroscopy. Also, upon application of these supramolecular bulky phosphines in hydrosilylation catalysis employing 1-hexene as a substrate, the catalysis data infer the presence of an active Rh species with two coordinated, bulky PN3/Zn(salphen) assembly units having a maximum of three Zn(salphen)s associated per PN3 scaffold, with an excess of bulky phosphines hardly affecting the overall activity.

A recyclable trinuclear bifunctional catalyst derived from a tetraoxo bis-Zn(salphen) metalloligand.

A tetraoxo bis-Zn(salphen) supramolecular host can bind various divalent metal salts, thereby providing access to trinuclear bifunctional systems that incorporate both Lewis acid sites and dynamically bound nucleophilic anions. The formation of these trinuclear species was investigated and their stability features were also determined. The application of these trinuclear complexes as bifunctional catalysts was evaluated in the formation of cyclic organic carbonates from epoxides and CO(2). The catalytic data, in combination with control experiments, clearly demonstrate that these trinuclear compounds show much higher recycling potential compared to various control compounds and they can be used in up to five cycles without an observable loss in activity. Furthermore, this new recyclable catalytic system does not require any additives and can be applied under solvent-free conditions.

Metal-directed assembly of chiral bis-Zn(II) Schiff base structures.

Tetra-Schiff bases derived from (chiral) bis-salphen ligand scaffolds furnish, upon metalation with appropriate metal reagents, their multinuclear structures with associated Zn(OAc)(2) or Zn(OH)(2) fragments. The tendency of retaining these salts was investigated using four different (chiral) bis-salphen scaffolds. The presence of the additional Zn ions was supported by NMR studies, mass determinations and X-ray crystallography showing in two cases the possible mode of coordination within these multinuclear structures. In one case, dimerization of the Zn(3) complex leads to a unique hexanuclear Zn(6) complex being a mixture of diastereoisomeric complexes as revealed by NMR spectroscopy.

Versatile switching in substrate topicity: supramolecular chirality induction in di- and trinuclear host complexes.

Supramolecular chirality effects have been achieved both for ditopic and monotopic substrates by using a programmable bis-salphen scaffold that incorporates either two or three Zn nuclei. The dinuclear host shows preferential chirogenesis in the presence of ditopic systems, whereas effective chirality transfer to the trinuclear complex is realized through monotopic binding. The mode of binding in the trinuclear host has been investigated through X-ray crystallography, CD measurements, UV/Vis spectroscopy, and DFT analysis. The bis-salphen scaffold holds promise for the development of substrate-specific host systems useful for determination of the absolute configuration of various types of organic molecules.