The dopant (n- and p-type)-, band gap-, size- and stress-dependent field electron emission of silicon nanowires.

This study investigates the electron field emission (EFE) of vertical silicon nanowires (Si NWs) fabricated on n-type Si (100) and p-type Si (100) substrates using catalyst-induced etching (CIE). The impact of dopant types (n- and p-types), optical energy gap, crystallite size and stress on EFE parameters has been explored in detail. The surface morphology of grown SiNWs has been characterized by field emission scanning electron microscopy (FESEM), showing vertical, well aligned SiNWs. Optical absorption and Raman spectroscopy confirmed the presence of the quantum confinement (QC) effect. The EFE performance of the grown nanowire arrays has been examined through recorded J-E measurements under the Fowler-Nordheim framework. The Si NWs grown on p-type Si showed a minimum turn-on field and also a higher field enhancement factor. The band-bending diagram also suggests a lower barrier height of p-type Si NWs compared to n-type Si NWs, which plays a key role in enhancing the EFE performance. These investigations suggest that dopant types (n- and p-types), band gap, crystallite size and stress influence the EFE parameters and Si NWs grown on p-type Si (100) substrates are much more favorable for the investigation of EFE properties.

Symmetry Breaking-Induced Resonance Dynamics in Bloch Point Nanospheres: Unveiling Magnetic Volume Effects and Geometric Parameters for Advanced Applications in Magnetic Sensing and Spintronics.

This study explores the impact of symmetry breaking on the ferromagnetic resonance of Bloch point (BP) nanospheres. Through standard Fourier analysis, we unveil two distinct oscillation mode groups characterized by low and high frequencies, respectively. Our findings emphasize the pivotal role of magnetic volume in shaping resonance amplitudes, providing new insights into the intricate dynamics of BP states. The investigation of geometric parameters reveals a quasi-monotonic decrease in resonance frequencies as a function of the asymmetry degree attributed to symmetry-breaking induced by geometric modifications. Spatial distribution analysis showcases unique resonance frequencies for the upper and lower BP hemispheres, highlighting the nuanced impact of the geometry on mode excitation. As the radius increases, additional modes emerge, demonstrating a compelling relationship between the magnetic volume and frequency. Phase analysis unveils coherent oscillations within each BP hemisphere, offering valuable insights into the rotational directions of the excitation poles. Beyond fundamental understanding, our study opens avenues for innovative applications, suggesting the potential use of nanospheres in advanced magnetic sensing, data storage, and nanoscale spintronic devices.

Static and dynamic magnetic properties of circular and square cobalt nanodots in hexagonal cells.

In this work we performed a detailed numerical analysis to investigate the static and dynamic magnetic properties of hexagonal cells of square and circular cobalt nanodots as a function of the distance between them and the external magnetic field to which they are subjected. By simulating hysteresis curves with the external magnetic field applied parallel and perpendicular to the plane of these nanostructures, we can conclude that the cobalt nanodots presented a significant perpendicular magnetic anisotropy. We also obtained that the coercivity increases with decreasing volume, which implies that the circular dots have a higher coercivity than the square dots. Furthermore, we studied the dynamic susceptibility of these systems and found that it is possible to control both the position and the number of resonance peaks by controlling the geometry and the distance between the magnetic nanodots. This work provides useful information on the behaviour of cobalt nanodot arrays, opening paths for the design and improvement of two-dimensional technological devices.

Tunable Magnetic Properties of Interconnected Permalloy Nanowire Networks.

In this study, we investigate the magnetic properties of interconnected permalloy nanowire networks using micromagnetic simulations. The effects of interconnectivity on the hysteresis curves, coercivity, and remanence of the nanowire networks are analyzed. Our results reveal intriguing characteristics of the hysteresis curves, including nonmonotonic behaviors of coercivity as a function of the position of horizontal nanowires relative to vertical nanowires. By introducing horizontal nanowires at specific positions, the coercivity of the nanowire networks can be enhanced without altering the material composition. The normalized remanence remains relatively constant regardless of the position of the horizontal wires, although it is lower in the interconnected nanowire arrays compared to nonconnected arrays. These findings provide valuable insights into the design and optimization of nanowire networks for applications requiring tailored magnetic properties.

Dynamic susceptibility of Fe3O4 nanotubes.

In this work we performed a detailed numerical analysis to investigate the dynamic susceptibility of 1000 nm long Fe3O4 nanotubes by varying the diameter, the tube wall thickness and the magnitude of the external magnetic field applied along the tube axis. We found two well-defined modes, one of low frequency associated with the caps of the nanotubes, and another of high frequency associated with the central area of the nanotubes, which can be controlled by varying the geometry of the tubes or the external magnetic field to which they are subjected. These results allow us to suggest the use of these nanotubes in applications that require controlling the resonant frequency in the GHz range.

Static and Dynamic Magnetic Properties of Fe3O4 Nanotubes.

In this paper, our objective was to investigate the static and dynamic magnetic properties of Fe3O4 nanotubes that are 1000 nm long, by varying the external radius and the thickness of the tube wall. We performed a detailed numerical analysis by simulating hysteresis curves with an external magnetic field applied parallel to the axis of the tubes (along the z-axis). Our findings indicate that nanotubes with an external radius of 30 nm exhibit non-monotonic behavior in their coercivity due to a change in the magnetization reversal mechanism, which was not observed in nanotubes with external radii of 80 nm. Additionally, we explored the dynamic susceptibility of these nanotubes and found that the position and number of resonance peaks can be controlled by manipulating the nanotube geometry. Overall, our study provides valuable insights into the behavior of Fe3O4 nanotubes, which can aid in the design and improvement in pseudo-one-dimensional technological devices.

Hollow Iron Oxide Nanospheres Obtained through a Combination of Atomic Layer Deposition and Electrospraying Technologies.

In the present study, we report on the successful synthesis of hollow iron oxide nanospheres. The hollow Fe3O4 nanospheres were synthesized following a four-step procedure: electrospraying spherical PVP particles, coating these particles with alumina (Al2O3) and hematite (Fe2O3) through atomic layer deposition and, finally, a thermal reduction process to degrade the polymer (PVP) and convert hematite (Fe2O3) into magnetite (Fe3O4). A structural analysis using X-ray diffraction (XRD) confirmed the effectiveness of the thermal reduction process. A morphological analysis confirmed that the four-step procedure allowed for the obtainment of hollow iron oxide nanospheres, even though the reduction process caused a contraction in the diameter of the particles of almost 300 nm, but did not affect the thickness of the walls of the hollow spheres that remained at approximately 15 nm. Magnetic properties of the hollow iron oxide nanospheres enable their use in applications where the agglomeration of magnetic nanostructures in liquid media is commonly not allowed, such as in drug encapsulation and delivery.

Large-Area Nanopillar Arrays by Glancing Angle Deposition with Tailored Magnetic Properties.

Ferromagnetic films down to thicknesses of tens of nanometers and composed by polycrystalline Fe and Fe2O3 nanopillars are grown in large areas by glancing angle deposition with magnetron sputtering (MS-GLAD). The morphological features of these films strongly depend on the growth conditions. Vertical or tilted nanopillars have been fabricated depending on whether the substrate is kept rotating azimuthally during deposition or not, respectively. The magnetic properties of these nanopillars films, such as hysteresis loops squareness, adjustable switching fields, magnetic anisotropy and coercivity, can be tuned with the specific morphology. In particular, the growth performed through a collimator mask mounted onto a not rotating azimuthally substrate produces almost isolated well-defined tilted nanopillars that exhibit a magnetic hardening. The first-order reversal curves diagrams and micromagnetic simulations revealed that a growth-induced uniaxial anisotropy, associated with an anisotropic surface morphology produced by the glancing angle deposition in the direction perpendicular to the atomic flux, plays an important role in the observed magnetic signatures. These results demonstrate the potential of the MS-GLAD method to fabricate nanostructured films in large area with tailored structural and magnetic properties for technological applications.

Information storage in permalloy modulated magnetic nanowires.

A long piece of magnetic material shaped as a central cylindrical wire (diameter [Formula: see text] nm) with two wider coaxial cylindrical portions (diameter [Formula: see text] nm and thickness [Formula: see text] nm) defines a bimodulated nanowire. Micromagnetism is invoked to study the equilibrium energy of the system under the variations of the positions of the modulations along the wire. The system can be thought of as composed of five independent elements (3 segments and 2 modulations) leading to [Formula: see text] possible different magnetic configurations, which will be later simplified to 4. We investigate the stability of the configurations depending on the positions of the modulations. The relative chirality of the modulations has negligible contributions to the energy and they have no effect on the stability of the stored configuration. However, the modulations are extremely important in pinning the domain walls that lead to consider each segment as independent from the rest. A phase diagram reporting the stability of the inscribed magnetic configurations is produced. The stability of the system was then tested under the action of external magnetic fields and it was found that more than 50 mT are necessary to alter the inscribed information. The main purpose of this paper is to find whether a prototype like this can be complemented to be used as a magnetic key or to store information in the form of firmware. Present results indicate that both possibilities are feasible.

Oscillations of skyrmion clusters in Co/Pt multilayer nanodots.

In this work we study the oscillations of the skyrmion cores in a multilayer nanodot as a function of the number of skyrmions hosted in the system. When all the skyrmions in the nanodot have the same core radius, and after applying a perpendicular spin-polarized current, a relaxation process takes place towards an equilibrium configuration that is accompanied by coherent damped oscillations of the skyrmion cores, whose frequency depends on the number of skyrmions present in the nanodot. Additionally, we found that the oscillation frequency is directly related to the total energy of the system.

Antimicrobial metal-based nanoparticles: a review on their synthesis, types and antimicrobial action.

The investigation of novel nanoparticles with antimicrobial activity has grown in recent years due to the increased incidence of nosocomial infections occurring during hospitalization and food poisoning derived from foodborne pathogens. Antimicrobial agents are necessary in various fields in which biological contamination occurs. For example, in food packaging they are used to control food contamination by microbes, in the medical field the microbial agents are important for reducing the risk of contamination in invasive and routine interventions, and in the textile industry, they can limit the growth of microorganisms due to sweat. The combination of nanotechnology with materials that have an intrinsic antimicrobial activity can result in the development of novel antimicrobial substances. Specifically, metal-based nanoparticles have attracted much interest due to their broad effectiveness against pathogenic microorganisms due to their high surface area and high reactivity. The aim of this review was to explore the state-of-the-art in metal-based nanoparticles, focusing on their synthesis methods, types, and their antimicrobial action. Different techniques used to synthesize metal-based nanoparticles were discussed, including chemical and physical methods and "green synthesis" methods that are free of chemical agents. Although the most studied nanoparticles with antimicrobial properties are metallic or metal-oxide nanoparticles, other types of nanoparticles, such as superparamagnetic iron-oxide nanoparticles and silica-releasing systems also exhibit antimicrobial properties. Finally, since the quantification and understanding of the antimicrobial action of metal-based nanoparticles are key topics, several methods for evaluating in vitro antimicrobial activity and the most common antimicrobial mechanisms (e.g., cell damage and changes in the expression of metabolic genes) were discussed in this review.

Permalloy nanowires/graphene oxide composite with enhanced conductive properties.

Carbon-metal-based composites arise as advanced materials in the frontiers with nanotechnology, since the properties inherent to each component are multiplexed into a new material with potential applications. In this work, a novel composite consisting of randomly oriented permalloy nanowires (Py NWs) intercalated among the sheets of multi-layered graphene oxide (GO) was performed. Py NWs were synthesized by electrodeposition inside mesoporous alumina templates, while GO sheets were separated by means of sonication. Sequential deposition steps of Py NWs and GO flakes allowed to reach a reproducible and stable graphene oxide-based magnetic assembly. Microscopic and spectroscopic results indicate that Py NWs are anchored on the surface as well as around the edges of the multi-layered GO, promoted by the presence of chemical groups, while magnetic characterization affords additional support to our hypothesis regarding the parallel orientation of the Py NWs with respect to the GO film, and also hints the parallel stacking of GO sheets with respect to the substrate. The most striking result remains on the electrochemical performance achieved by the composite that evidences an enhanced conductive behaviour compared to a standard electrode. Such effect provides an approach to the development of permalloy nanowires/graphene oxide-based electrodes as attractive candidates for molecular sensing devices.

Antimicrobial Bilayer Nanocomposites Based on the Incorporation of As-Synthetized Hollow Zinc Oxide Nanotubes.

An antimicrobial polymeric bilayer structure based on the application of an acrylic coating containing hollow zinc oxide nanotubes over a polymeric substrate was developed in this work. Firstly, zinc oxide nanotubes (ZnONT) were obtained by an atomic layer deposition (ALD) process over electrospun polyvinyl alcohol nanofibers followed by polymer removal through calcination with the purpose of obtaining antimicrobial nanostructures with a high specific area. Parameters of electrospinning, ALD, and calcination processes were set in order to obtain successfully hollow zinc oxide nanotubes. Morphological studies through scanning electron microscopy (SEM) and transmission electron microscopy (TEM) microscopies confirmed the morphological structure of ZnONT with an average diameter of 180 nm and thickness of approximately 60 nm. Thermal and X-ray diffraction (XRD) analyses provided evidence that calcination completely removed the polymer, resulting in a crystalline hexagonal wurtzite structure. Subsequently, ZnONT were incorporated into a polymeric coating over a polyethylene extruded film at two concentrations: 0.5 and 1 wt. % with respect to the polymer weight. An antimicrobial analysis of developed antimicrobial materials was performed following JIS Z2801 against Staphylococcus aureus and Escherichia coli. When compared to active materials containing commercial ZnO nanoparticles, materials containing ZnONT presented higher microbial inhibition principally against Gram-negative bacteria, whose reduction was total for films containing 1 wt. % ZnONT. Antiviral studies were also performed, but these materials did not present significant viral reduction.

Soft X-ray magnetic scattering studies of 3D magnetic morphology along buried interfaces in NiFe/CoPd/NiFe nanostructures.

With the continuing interest in new magnetic materials for sensor devices and data storage applications, the community needs reliable and sensitive tools for the characterization of such materials. Soft X-rays tuned to elemental absorption edges are a depth and element sensitive probe of magnetic structure at the nanoscale, and scattering measurements have the potential to provide 3D magnetic structural information of the material. In this work we develop a methodology in transmission geometry that allows one to probe the spatial distribution of the magnetization along the different layers of magnetic heterostructures. We study the in-plane/out-of-plane transition of magnetic domains in multilayer thin film systems consisting of two layers of NiFe top and bottom, and a 50 repeat Co/Pd multilayer in the centre. The experimental data are analysed by simulating scattering data starting from micromagnetic simulations, and we find that the out of plane domains of the Co/Pd multilayer intrude into the NiFe layers to a greater extent than would be expected from micromagnetic simulations performed using the standard magnetically isotropic input parameters for the NiFe layers.

Novel hollow titanium dioxide nanospheres with antimicrobial activity against resistant bacteria.

The search for and synthesis of new antimicrobial nanostructures is important to reduce microbial incidence that induces infectious diseases and to aid in the antibiotic resistance crisis, which are two of the most pressing issues in global public health. In this work, novel, hollow, calcined titanium dioxide nanospheres (CSTiO2) were successfully synthesized for the first time through the combination of electrospinning and atomic layer deposition techniques. Poly(vinylpyrrolidone) (PVP) electrosprayed spherical particles were double-coated with alumina and titanium dioxide, and after a calcination process, hollow nanospheres were obtained with a radius of approximately 345 nm and shell thickness of 17 nm. The structural characterization was performed using electron microscopy, and X-ray diffraction and small-angle X-ray diffraction evidenced an anatase titanium dioxide crystalline structure. Thermogravimetric analysis and Fourier-transform infrared spectroscopy studies demonstrated the absence of polymer residue after the calcination process. The antimicrobial properties of the developed CSTiO2 hollow nanospheres were evaluated against different bacteria, including resistant E. coli and S. aureus strains, and when compared to commercial TiO2 nanoparticles, CSTiO2 nanospheres exhibited superior performance. In addition, the positive effect of UV irradiation on the antimicrobial activity was demonstrated.

Magnetic properties of Fe3O4 antidot arrays synthesized by AFIR: atomic layer deposition, focused ion beam and thermal reduction.

Magnetic films of magnetite (Fe3O4) with controlled defects, so-called antidot arrays, were synthesized by a new technique called AFIR. AFIR consists of the deposition of a thin film by atomic layer deposition, the generation of square and hexagonal arrays of holes using focused ion beam milling, and the subsequent thermal reduction of the antidot arrays. Magnetic characterizations were carried out by magneto-optic Kerr effect measurements, showing the enhancement of the coercivity for the antidot arrays. AFIR opens a new route to manufacture ordered antidot arrays of magnetic oxides with variable lattice parameters.

Novel Antimicrobial Titanium Dioxide Nanotubes Obtained through a Combination of Atomic Layer Deposition and Electrospinning Technologies.

The search for new antimicrobial substances has increased in recent years. Antimicrobial nanostructures are one of the most promising alternatives. In this work, titanium dioxide nanotubes were obtained by an atomic layer deposition (ALD) process over electrospun polyvinyl alcohol nanofibers (PVN) at different temperatures with the purpose of obtaining antimicrobial nanostructures with a high specific area. Electrospinning and ALD parameters were studied in order to obtain PVN with smallest diameter and highest deposition rate, respectively. Chamber temperature was a key factor during ALD process and an appropriate titanium dioxide deposition performance was achieved at 200 °C. Subsequently, thermal and morphological analysis by SEM and TEM microscopies revealed hollow nanotubes were obtained after calcination process at 600 °C. This temperature allowed complete polymer removal and influenced the resulting anatase crystallographic structure of titanium dioxide that positively affected their antimicrobial activities. X-ray analysis confirmed the change of titanium dioxide crystallographic structure from amorphous phase of deposited PVN to anatase crystalline structure of nanotubes. These new nanostructures with very large surface areas resulted in interesting antimicrobial properties against Gram-positive and Gram-negative bacteria. Titanium dioxide nanotubes presented the highest activity against Escherichia coli with 5 log cycles reduction at 200 µg/mL concentration.

Composition and diameter modulation of magnetic nanowire arrays fabricated by a novel approach.

Straight magnetic nanowires composed of nickel and permalloy segments having different diameters are synthesized using a promising approach. This approach involves the controlled electrodeposition of each magnetic material into specially designed diameter-modulated porous alumina templates. Standard alumina templates are exposed to pore widening followed by a protective coating of the pore wall with ultrathin silica and further anodization. Micromagnetic simulations are employed to investigate the process of magnetization reversal in the fabricated nanowires when the magnetic materials exchange their places in the thick and thin segments. It is found that the magnetization reversal occurs by the propagation of transverse domain wall (DW) when the thick segment is composed of permalloy. However, the reversal process proceeds by the propagation of vortex DW when permalloy is located at the thin segment.

Temperature-dependent magnetic properties of Ni nanotubes synthesized by atomic layer deposition.

Highly-ordered and conformal Ni nanotube arrays were prepared by combining atomic layer deposition (ALD) in a porous alumina matrix with a subsequent thermal reduction process. In order to obtain NiO tubes, one ALD NiCp2/O3 cycle was repeated 2000 times. After the ALD process, the sample is reduced from NiO to metallic Ni under hydrogen atmosphere. Their magnetic properties such as coercivity and squareness have been determined in a vibrating sample magnetometer in the temperature range from 5-300 K for applied magnetic fields parallel and perpendicular to the nanotube axis. Ni nanotubes synthesized by ALD provide a promising opportunity for potential applications in spintronics, data storage and bio-applications.

Magnetic properties of cylindrical diameter modulated Ni80Fe20 nanowires: interaction and coercive fields.

Magnetic properties of cylindrical Ni80Fe20 nanowires with modulated diameters are investigated theoretically as a function of their geometrical parameters and compared with those produced inside the pores of anodic alumina membranes by pulsed electrodeposition. We observe that the Ni80Fe20 nanowires with modulated diameters reverse their magnetization via the nucleation and propagation of a vortex domain wall. The system begins generating vortex domains in the nanowire ends and in the transition region between the two segments to minimize magnetostatic energy generated by surfaces perpendicular to the initial magnetization of the sample. Besides, we observed an increase of the coercivity for the sample with equal volumes in relation to the sample with equal lengths. Finally, the interaction field is stronger in the case of constant volume segments. These structures could be used to control the motions of magnetic domain walls. In this way, these nanowires with modulated diameters can be an alternative to store information or even perform logic functions.