RESUMO
3D-bioprinting is a promising technology to produce human tissues as drug screening tool or for organ repair. However, direct printing of living cells has proven difficult. Here, a method is presented to directly 3D-bioprint human induced pluripotent stem cell (hiPSC)-derived cardiomyocytes embedded in a collagen-hyaluronic acid ink, generating centimeter-sized functional ring- and ventricle-shaped cardiac tissues in an accurate and reproducible manner. The printed tissues contain hiPSC-derived cardiomyocytes with well-organized sarcomeres and exhibit spontaneous and regular contractions, which persist for several months and are able to contract against passive resistance. Importantly, beating frequencies of the printed cardiac tissues can be modulated by pharmacological stimulation. This approach opens up new possibilities for generating complex functional cardiac tissues as models for advanced drug screening or as tissue grafts for organ repair or replacement.
Assuntos
Bioimpressão , Células-Tronco Pluripotentes Induzidas , Humanos , Miócitos Cardíacos , Engenharia Tecidual , Impressão TridimensionalRESUMO
During bioprinting, cells are suspended in a viscous bioink and extruded under pressure through small diameter printing needles. The combination of high pressure and small needle diameter exposes cells to considerable shear stress, which can lead to cell damage and death. Approaches to monitor and control shear stress-induced cell damage are currently not well established. To visualize the effects of printing-induced shear stress on plasma membrane integrity, we add FM 1-43 to the bioink, a styryl dye that becomes fluorescent when bound to lipid membranes, such as the cellular plasma membrane. Upon plasma membrane disruption, the dye enters the cell and also stains intracellular membranes. Extrusion of alginate-suspended NIH/3T3 cells through a 200µm printing needle led to an increased FM 1-43 incorporation at high pressure, demonstrating that typical shear stresses during bioprinting can transiently damage the plasma membrane. Cell imaging in a microfluidic channel confirmed that FM 1-43 incorporation is caused by cell strain. Notably, high printing pressure also impaired cell survival in bioprinting experiments. Using cell types of different stiffnesses, we find that shear stress-induced cell strain, FM 1-43 incorporation and cell death were reduced in stiffer compared to softer cell types and demonstrate that cell damage and death correlate with shear stress-induced cell deformation. Importantly, supplementation of the suspension medium with physiological concentrations of CaCl2greatly reduced shear stress-induced cell damage and death but not cell deformation. As the sudden influx of calcium ions is known to induce rapid cellular vesicle exocytosis and subsequent actin polymerization in the cell cortex, we hypothesize that calcium supplementation facilitates the rapid resealing of plasma membrane damage sites. We recommend that bioinks should be routinely supplemented with physiological concentrations of calcium ions to reduce shear stress-induced cell damage and death during extrusion bioprinting.
Assuntos
Bioimpressão , Alginatos , Animais , Bioimpressão/métodos , Cálcio , Suplementos Nutricionais , Camundongos , Impressão Tridimensional , Engenharia Tecidual/métodos , Alicerces TeciduaisRESUMO
Cardiac tissue engineering is a promising strategy to generate human cardiac tissues for modeling cardiac diseases, screening for therapeutic drugs, and repairing the injured heart. Yet, several issues remain to be resolved including the generation of tissues with high cardiomyocyte density. Here, it is shown that the integration of the glycogen synthase kinase-3ß inhibitor CHIR99021 in collagen I hydrogels promotes proliferation of human-induced pluripotent stem cell-derived (hiPSC) cardiomyocytes post-fabrication improving contractility of and calcium flow in engineered 3D cardiac microtissues. CHIR99021 has no effect on the gelation kinetics or the mechanical properties of collagen I hydrogels. Analysis of cell density and proliferation based on Ki-67 staining indicates that integration of CHIR99021 together with external CHIR99021 stimulation increases hiPSC-cardiomyocyte number by ≈2-fold within 7 d post-fabrication. Analysis of the contractility of engineered cardiac tissues after another 3 d in the absence of external CHIR99021 shows that CHIR99021-induced hiPSC-cardiomyocyte proliferation results in synchronized calcium flow, rhythmic beating, increased speed of contraction and contraction amplitude, and reduced peak-to-peak time. The CHIR99021-stimulated engineered cardiac microtissues exhibit spontaneous rhythmic contractions for at least 35 d. Collectively, the data demonstrate the potential of induced cardiomyocyte proliferation to enhance engineered cardiac microtissues by increasing cardiomyocyte density.
Assuntos
Células-Tronco Pluripotentes Induzidas , Diferenciação Celular , Proliferação de Células , Humanos , Miócitos Cardíacos , Piridinas/farmacologia , PirimidinasRESUMO
Human pluripotent stem cells (hPSCs) hold great promise for applications in cell therapy and drug screening in the cardiovascular field. Bone morphogenetic protein 4 (BMP4) is key for early cardiac mesoderm induction in hPSC and subsequent cardiomyocyte derivation. Small-molecular BMP4 mimetics may help to standardize cardiomyocyte derivation from hPSCs. Based on observations that chalcones can stimulate BMP4 signaling pathways, we hypothesized their utility in cardiac mesoderm induction. To test this, we set up a two-tiered screening strategy, (1) for directed differentiation of hPSCs with commercially available chalcones (4'-hydroxychalcone [4'HC] and Isoliquiritigen) and 24 newly synthesized chalcone derivatives, and (2) a functional screen to assess the propensity of the obtained cardiomyocytes to self-organize into contractile engineered human myocardium (EHM). We identified 4'HC, 4-fluoro-4'-methoxychalcone, and 4-fluoro-4'-hydroxychalcone as similarly effective in cardiac mesoderm induction, but only 4'HC as an effective replacement for BMP4 in the derivation of contractile EHM-forming cardiomyocytes.
Assuntos
Chalconas/farmacologia , Mesoderma/efeitos dos fármacos , Miocárdio/citologia , Células-Tronco Pluripotentes/efeitos dos fármacos , Engenharia Tecidual , Chalconas/química , Relação Dose-Resposta a Droga , Humanos , Mesoderma/metabolismo , Estrutura Molecular , Células-Tronco Pluripotentes/metabolismo , Relação Estrutura-AtividadeRESUMO
Significance: Heart failure is among the leading causes of morbidity worldwide with a 5-year mortality rate of â¼50%. Therefore, major efforts are invested to reduce heart damage upon injury or maintain and at best restore heart function. Recent Advances: In clinical trials, acellular constructs succeeded in improving cardiac function by stabilizing the infarcted heart. In addition, strategies utilizing stem-cell-derived cardiomyocytes have been developed to improve heart function postmyocardial infarction in small and large animal models. These strategies range from injection of cell-laden hydrogels to unstructured hydrogel-based and complex biofabricated cardiac patches. Importantly, novel methods have been developed to promote differentiation of stem-cell-derived cardiomyocytes to prevascularized cardiac patches. Critical Issues: Despite substantial progress in vascularization strategies for heart-on-the-chip technologies, little advance has been made in generating vascularized cardiac patches with clinically relevant dimensions. In addition, proper electrical coupling between engineered and host tissue to prevent and/or eliminate arrhythmia remains an unresolved issue. Finally, despite advanced approaches to include hierarchical structures in cardiac tissues, engineered tissues do not generate forces in the range of native adult cardiac tissue. Future Directions: It involves utilizing novel materials and advancing biofabrication strategies to generate prevascularized three-dimensional multicellular constructs of clinical relevant size; inclusion of hierarchical structures, electroconductive materials, and biologically active factors to enhance cardiomyocyte differentiation for optimized force generation and vascularization; optimization of bioreactor strategies for tissue maturation. Antioxid. Redox Signal. 35, 143-162.
Assuntos
Miócitos Cardíacos/metabolismo , Medicina Regenerativa , Células-Tronco/metabolismo , Engenharia Tecidual , Animais , Materiais Biocompatíveis , Diferenciação Celular , Terapia Baseada em Transplante de Células e Tecidos/métodos , Modelos Animais de Doenças , Fenômenos Eletrofisiológicos , Insuficiência Cardíaca/diagnóstico , Insuficiência Cardíaca/etiologia , Insuficiência Cardíaca/terapia , Células-Tronco Hematopoéticas/citologia , Células-Tronco Hematopoéticas/metabolismo , Humanos , Células-Tronco Pluripotentes Induzidas/citologia , Células-Tronco Pluripotentes Induzidas/metabolismo , Células-Tronco Mesenquimais/citologia , Células-Tronco Mesenquimais/metabolismo , Mioblastos/citologia , Mioblastos/metabolismo , Miócitos Cardíacos/citologia , Neovascularização Fisiológica , Transplante de Células-Tronco/métodos , Células-Tronco/citologia , Engenharia Tecidual/métodos , Alicerces TeciduaisRESUMO
INTRODUCTION: Vascularization remains one of the greatest yet unmet challenges in tissue engineering. When engineered tissues are scaled up to therapeutically relevant dimensions, their demand of oxygen and nutrients can no longer be met by diffusion. Thus, there is a need for perfusable vascular structures. Hypoxia-inducible factors (HIF) act as transcriptional oxygen sensors and regulate a multitude of genes involved in adaptive processes to hypoxia, including angiogenesis. Thus, targeting HIFs is a promising strategy to induce vascularization of engineered tissues. AREAS COVERED: Here we review current vascularization strategies and summarize the present knowledge regarding activation of HIF signaling by ions, iron chelating agents, α-Ketoglutarate (αKG) analogues, and the lipid-lowering drug simvastatin to induce angiogenesis. Specifically, we focus on the incorporation of HIF-activating agents into biomaterials and scaffolds for controlled release. EXPERT OPINION: Vascularization of tissue constructs through activation of upstream regulators of angiogenesis offers advantages but also suffers from drawbacks. HIFs can induce a complete angiogenic program; however, this program appears to be too slow to vascularize larger constructs before cell death occurs. It is therefore crucial that HIF-activation is combined with cell protective strategies and prevascularization techniques to obtain fully vascularized, vital tissues of therapeutically relevant dimensions.