Exploiting itraconazole-loaded nanomixed micelles in coated capsules as efficient colon-targeted delivery system for improved antifungal and potential anticancer efficacy.

Chronic Inflammatory bowel diseases are usually accompanied by opportunistic colonic fungal infections. Itraconazole (ITZ), is a highly lipophilic broad-spectrum antifungal drug that is superiorly effective against several fungal species. Box-Behnken design was adopted to design ITZ-nanomixed micelles (ITZ-NMMs), aiming to enhance ITZ solubility, using various concentrations of Pluronic® L121, Cremophor EL, and with either sodium-deoxycholate or Pluronic® F68 through thin film hydration technique. Optimized formula composed of 90 % Pl-L121, 9.1% Cremophor EL, 3.127 % ITZ concentration and SDC as the hydrophilic surfactant and its particle size, Polydispersity index, zeta potential, entrapment efficiency, and release extent after 3 h were found to be 17.82 ± 0.189 nm, 0.26 ± 0.014, -6.72 ± 0.725 mV, 66 ± 7.4%, and 96.3 ± 7.22%, respectively. In vitro ITZ release study implied the ability of optimal ITZ-NMMs to enhance ITZ solubility in comparison to ITZ suspension. Also, augmented anti-fungal and anti-cancer activities were proven as ITZ-NMMs IC50 was 16.5 times that of pure ITZ. Afterwards, lyophilized optimal ITZ-NMMs formula was loaded into Eudragit S100-coated capsules where in vitro release and in vivo X-ray imaging ensured protection of ITZ release in either the stomach or intestine and targeting it to the colon. Such results suggested promising ITZ-NMMs system, capable of enhancing ITZ solubility in the intended target site, therefore, can be used not only in the treatment of colon fungal infections but also augments colon cancer therapy.

PTEN and TRAIL genes loaded zein nanoparticles as potential therapy for hepatocellular carcinoma.

Gene therapy is one of the recent approaches in treatment of hepatocellular carcinoma (HCC). Development of a vector or vehicle that can selectively and efficiently deliver the gene to target cells with minimal toxicity is an urgent demand. In the present study, phosphatase and tensin homolog (PTEN) and tumor necrosis factor (TNF)-related apoptosis-inducing ligand (TRAIL) genes were loaded to zein nanoparticles (ZNPs). The formulated PTEN and TRAIL-loaded ZNPs were tested for their in vitro and in vivo potential antitumor efficacy using liver tumor cells (HepG2) and HCC-induced rats as animal model. Also, mRNA expression of p53, VGEF and MMP-2 were carried out as markers of apoptosis, angiogenesis and metastasis in animal liver tissues. The results of the study showed that both PTEN and TRAIL-loaded ZNPs proved anti-proliferative activity against HepG2 cell lines with IC50 values of 0.09, 0.25 µg/ml, respectively. In vivo assay confirmed decrease in mRNA expression of both VEGF and MMP-2 with increased in P53 expression level in liver tissues of the treated animals. Therefore, authors introduced new integration between gene therapy and nanotechnology in the form of PTEN and TRAIL-loaded ZNPs that proved potential to be used in gene therapy for the treatment of HCC.

Nanoparticles as tool for enhanced ophthalmic delivery of vancomycin: a multidistrict-based microbiological study, solid lipid nanoparticles formulation and evaluation.

CONTEXT: A microbiological multidistrict-based survey from different Egyptian governorates was conducted to determine the most prevalent causative agents of ocular infections in the Egyptian population. Antibiotic sensitivity testing was then performed to identify the most potent antimicrobial agent. Vancomycin (VCM) proved the highest activity against gram-positive Staphylococcus bacteria, which are the most commonly isolated causative agents of ocular infection. However, topically applied VCM suffers from poor ocular bioavailability because of its high molecular weight and hydrophilicity. OBJECTIVE: The aim of the present study was to develop VCM-loaded solid lipid nanoparticles (SLNs) using water-in-oil-in-water (W/O/W) double emulsion, solvent evaporation technique to enhance ocular penetration and prolong ophthalmic residence of VCM. METHOD: Two consecutive full factorial designs (2(4) followed by 3(2)) were adopted to study the effect of different formulation and process parameters on SLN formulation. The lipid type and structure, polyvinyl alcohol (PVA) molecular weight and concentration, sonication time, as well as lipid:drug ratio were studied as independent variables. The formulated SLN formulae were evaluated for encapsulation efficiency (EE%), particle size (PS), and zeta potential as dependent variables. RESULTS: The statistically-optimized SLN formula (1:1 ratio of glyceryltripalmitate:VCM with 1% low molecular weight PVA and 1 min sonication time) had average PS of 277.25 nm, zeta potential of -20.45, and 19.99% drug encapsulation. Scanning and transmission electron micrographs showed well-defined, spherical, homogenously distributed particles. CONCLUSION: The present study suggests that VCM incorporation into SLNs is successfully achievable; however, further studies with different nanoencapsulation materials and techniques would be valuable for improving VCM encapsulation.

Localized rosuvastatin via implantable bioerodible sponge and its potential role in augmenting bone healing and regeneration.

OBJECTIVE: Statins proved potential bone healing properties. Rosuvastatin is a synthetic, hydrophilic, potent and highly efficacious statin. In the current work, an attempt was investigated to develop, evaluate various bioerodible composite sponges enclosing rosuvastatin and explore their potential in augmenting bone healing and regeneration. METHOD: Twelve lyophilized sponge formulae were prepared adapting a 41.31 full factorial design. Xanthan gum, polycarbophil, Carbopol® and sodium alginate were investigated as anionic polymers, each at three chitosan:anionic polymer ratios (1:3, 1:1, 3:1). The formula of choice was implanted in fractured rat femora. RESULTS: Visual and microscopic examination showed flexible homogenous porous structures with considerable bending ability. Polyelectrolyte complex formation was proved by DSC and FT-IR for all chitosan/anionic combinations except with xanthan gum where chitosan probably bound to the drug rather than xanthan gum. Statistical analysis proved that anionic polymer type and chitosan: polymer ratio, as well as, their interactions, exhibited significant effects on the release parameters at p ≤ 0.05. The optimum chitosan/anionic polymer complexation ratios were 3:1 for polycarbophil and 1:1 for Carbopol and alginate. The release at these ratios followed Fiction diffusion while other ratios had anomalous diffusion. Imwitor® 900K and HPMC K100M were added as release retarardants for further release optimization. The formula of choice was implanted in fractured rat femora. Histopathological examination revealed advanced stages of healing in treated femora compared to control ones. CONCLUSION: Biodegradable sponges for local rosuvastatin delivery proved significantly enhanced wound healing and regeneration properties to fractured bones.

Controlled-release triple anti-inflammatory therapy based on novel gastroretentive sponges: characterization and magnetic resonance imaging in healthy volunteers.

The current work aimed to develop novel composite sponges of chitosan (CH)-chondroitin sulfate (CS) as a low-density gastroretentive delivery system for lornoxicam (LOR). This triple anti-inflammatory therapy-loaded matrices are expected to expand and float upon contact with gastric fluids for prolonged times. CH and CS solutions (3%, w/w) were prepared, mixed in different ratios, lyophilized, coated with magnesium stearate and compressed. The CH:CS interpolymer complex (IPC) was evaluated via FT-IR, DSC, and XRD. The compressed-sponges were evaluated for appearance, structure, porosity, pore diameter, density, wetting-time, floating characteristics, adhesion-retention, and LOR-release. The gastroretentivity of the best achieved magnetite-loaded sponges was monitored in healthy volunteers via MRI. The interaction between CH (protonated amino groups) and CS (anionic carboxylate/sulfate groups) proved IPC formation. DSC and XRD studies confirmed loss of LOR crystallinity. The sponges possessed interconnecting porous-network structures. The porosity, mean pore diameter, and bulk density of CH:CS (10:3) IPC sponges were 11.779%, 25.4 nm, and 0.670 g/mL, respectively. They showed complete wetting within seconds, gradual size-expansion within minutes and prolonged adhesion for hours. Controlled LOR-release profiles were tailored over 12h to satisfy individual patient needs. Monitoring of sponges via MRI proved their gastroretentivity for at least 5h.

Statistical approach for assessing the influence of calcium silicate and HPMC on the formulation of novel alfuzosin hydrochloride mucoadhesive-floating beads as gastroretentive drug delivery systems.

Multiparticulate floating drug delivery systems have proven potential as controlled-release gastroretentive drug delivery systems that avoid the "all or none" gastric emptying nature of single-unit floating dosage forms. An objective of the presence investigation was to develop calcium silicate (CaSi)/calcium alginate (Ca-Alg)/hydroxypropyl methylcellulose (HPMC) mucoadhesive-floating beads that provide time- and site-specific drug release of alfuzosin hydrochloride (Alf). Beads were prepared by simultaneous internal and external gelation method utilizing 3(2) factorial design as an experimental design; with two main factors evaluated for their influence on the prepared beads; the concentration of CaSi as floating aid (X (1)) and the percentage of HPMC as viscosity enhancer and mucoadhesive polymer (X (2)), each of them was tested in three levels. Developed formulations were evaluated for yield, entrapment efficiency, particle size, surface topography, and buoyancy. Differential scanning calorimetry, Fourier transform infrared spectroscopy, in vitro drug release, as well as in vitro mucoadhesion using rat stomach mucosal membrane were also conducted. Percentage yield and entrapment efficiency ranged from 57.03% to 78.51% and from 49.78% to 83.26%, respectively. Statistical analysis using ANOVA proved that increasing the concentration of either CaSi or HPMC significantly increased the beads yield. Both CaSi and HPMC concentrations were found to significantly affect Alf release from the beads. Additionally, higher CaSi concentration significantly increased the beads diameter while HPMC concentration showed significant positive effect on the beads mucoadhesive properties. CaSi/Ca-Alg/HPMC beads represent simple floating-mucoadhesive gastroretentive system that could be useful in chronopharmacotherapy of benign prostatic hyperplasia.