Metal-Free Enantioselective 1,4-Addition of Diarylphosphine Oxides to α,ß-Unsaturated Carboxylic Esters.

The catalytic asymmetric conjugate addition of phosphorus nucleophiles to unsaturated compounds, catalyzed by metallic or nonmetallic catalysts, has been extensively developed. However, the enantioselective transformations involving α,ß-unsaturated carboxylic esters for constructing chiral c-p bonds have been rarely reported, particularly in metal-free processes. In this study, we present a novel metal-free methodology for enantioselective 1,4-addition of diarylphosphine oxides to α,ß-unsaturated carboxylic esters using classical chiral oxazaborolidine catalysts. Remarkably high yields and enantioselectivities were obtained for most of the products. Furthermore, these valuable chiral phosphorus esters serve as crucial intermediates that can be transformed into various derivatives including amides, acids, and alcohols in a single step.

Asymmetric 1,4-Addition of Diarylphosphine Oxides to α, ß-Unsaturated 2-Acyl Imidazoles.

Here we introduce a metal-free, catalytic and enantioselective strategy from α,ß-unsaturated 2-acyl imidazoles to the chiral phosphorous 2-acyl imidazoles. Interestingly, this methodology was catalyzed by the classical and commercial oxazaborolidine under mild conditions. This strategy features a wide range of substrates scope with good yields and excellent enantioselectivities. The possible mechanism further suggests the key of this reaction through the cleavage of diarylphosphine oxides using Frustrated Lewis Pairs theory.

Protective and Flame-Retardant Bifunctional Epoxy-Based Nanocomposite Coating by Intercomponent Synergy between Modified CaAl-LDH and rGO.

Extensive utilization in various settings poses extra requirements of coatings beyond just anticorrosion properties. Herein, 8-hydroxyquinoline (8-HQ) intercalated CaAl-based layered double hydroxide (CaAl-8HQ-LDH) was loaded on reduced GO (rGO) through a one-pot hydrothermal reaction, which was employed as the nanofiller endowing the epoxy (EP/CaAl-8HQ LDH@rGO) with excellent flame-retardancy while ensuring efficient protection for mild steel. Results of electrochemical impedance spectroscopy (EIS) demonstrated the durability of the EP/CaAl-8HQ LDH@rGO-coated specimen, with the impedance at the lowest frequency (|Z|0.01Hz) maintained as 1.84 × 1010 Ω cm2 after 120 days of immersion in a 3.5 wt % NaCl solution. Even for the scratched EP/CaAl-8HQ LDH@rGO system, only a slight decline in |Z|0.01Hz was observed during 180 h of exposure to the NaCl solution, indicating a self-healing feature supported by salt spray tests. UL-94 burning tests revealed the V-0 rating for EP/CaAl-8HQ LDH@rGO with improved thermostability. Strong physical barrier from two-dimensional rGO and the release of 8-HQ from LDH interlayers accounted for the anticorrosive and self-healing properties. However, O2-concentration dilution and charring-layer promotion governed the flame-retardant behavior of the nanocomposite coating. The intercomponent synergy of nanofillers achieved in this work may provide a useful reference for designing multifunctional coatings.

Ultralong Stability of Ti3 C2 Tx -MXene Dispersion Through Synergistic Regulation of Storage Environment and Defect Capping with Tris-HCl Buffering.

Aqueous MXene dispersion suffers from a bottleneck issue of oxidation, leading to its gradual deterioration and ultimately compromised physicochemical characteristics. Herein, Tris-HCl buffer is employed to stabilize the diluted Ti3 C2 Tx -MXene dispersion (0.05 mg mL-1 ) through the synergy of its potent pH-regulation capability and capping effect toward oxidation-susceptible defects/edges. Tris-HCl functionalized Ti3 C2 Tx maintained its original morphology, structure, and favorable dispersity even after 150 days of aging under naturally aerated conditions. The pH-regulation nature of Tris-HCl is elucidated through solution monitoring of Ti3 C2 Tx dispersion, while the adsorption of Tris-HCl onto defects/edges is revealed by spectral analysis and multi-scale simulations. Tris-HCl at the neutral pH can bind to the negatively charged basal plane of Ti3 C2 Tx via + HTris moiety, while the other moiety (Tris) interacts with the exposed edge-based Ti atoms and/or intrinsic defects, forming a Ti─N bond that prevents MXene from attack by H2 O and O2 . Besides, Tris-HCl stabilized Ti3 C2 Tx exhibited nearly identical capacitive characteristics to its freshly-etched counterpart, indicating the minimal impact of Tris-HCl on electrochemical performance of Ti3 C2 Tx during long-term storage. This study provides practical guidance for stabilizing MXene in their native aqueous dispersion without compromising the inherent properties.

Enantioselective Synthesis of C2-Quaternary Indolin-3-ones by Pt-Catalyzed Alkynylation of 2-Aryl-3H-indol-3-one with Alkynylsilanes.

An efficient method for the synthesis of five-membered chiral propargylic amines from 2-aryl-3H-indol-3-one and alkynylsilanes has been developed. The reaction proceeded under the catalytic system of PtCl4, oxazoline-based ligand L11, Zn(CF3COO)2, and AcOH in DCE at 95 °C via in situ desilylation of TMS-alkynes. This methodology also highlights a new protocol for the in situ desilylation of alkynylsilanes. The reaction showed a broad substrate scope with good yields and enantioselectivity.

Pd-Catalyzed Asymmetric Allylation Reaction of 2-Aryl-3H-indol-3-ones with Allyltrimethylsilane.

An efficient method for the first ene-reaction of 2-aryl-3H-indol-3-ones with allyltrimethylsilane has been developed for the first time. The reaction proceeded under the catalysis of Pd(OAc)2 and chiral phosphoric ligand L11 in the presence of Cu(CF3COO)2·XH2O, PivOH, and 5 Å molecular sieves in DMSO at 60 °C. The present methodology can avoid the impact of amine products generated by the reaction on the catalyst, and at the same time, the high catalytic activity of classical palladium catalysts still has catalytic ability for low electrophilic keto-imines. The desired products were furnished in excellent yields with good enantioselectivity.

Hydrogenation of Alkynes and Olefins Catalyzed by Quaternary Ammonium Salts.

Catalytic hydrogenation of unsaturated hydrocarbons to alkenes and alkanes using molecular hydrogen is one of the most fundamental transformations in organic synthesis. While methodologies involving transition metals as catalysts in homogeneous and heterogeneous processes have been well developed, metal-free catalytic hydrogenation offers an ideal approach for future chemistry. Herein, the common and inexpensive quaternary ammonium salts are first introduced as catalysts in the catalytic hydrogenation system for the transformations from alkynes or olefins into the corresponding olefins or alkanes. Interestingly, the hydrogenation process of alkynes can be controlled to selectively produce alkenes or alkanes under different conditions. Moreover, the possible mechanism is discussed in new insights into the catalytic behavior of quaternary ammonium salts.

Application of Oxazaborolidine Catalysts (CBS) on Enantioselective 1,4-Addition of Diarylphosphine Oxides to α,ß-Unsaturated Thioesters.

Here, we report the first catalytic enantioselective 1,4-addition of diarylphosphine oxides to α,ß-unsaturated thioesters. Importantly, the most common and commercial oxazaborolidine (CBS) was employed as a catalyst for its new application without being activated by strong protonic acids or Lewis acids and led to the chiral thioesters in excellent yields and enantioselectivities. Furthermore, this method features mild reaction conditions (room temperature and air-insensitive), good substrate tolerance, and easy scalability.

Cantharidin analogue alleviates dextran sulfate sodium-induced colitis in mice by inhibiting the activation of NF-κB signaling.

Ulcerative colitis is a chronic inflammatory disease with a remitting-relapsing clinical course, it has evolved into a global burden given its high incidence worldwide. Cantharidin (CTD) derivatives are a class of compounds whose structures characterized with a 7-oxabicyclo [2.2.1]heptane core. Though potent cytotoxicity CTD and its derivatives showed, their clinical usage as anti-cancer drugs was limited by the toxicity in organs. In order to find new CTD analogues with good activity and lower toxicity, 21 CTD analogues with or without alkynyl substitution at C5 position of 7-oxabicyclo [2.2.1]heptane core were synthesized, some compounds showed better in vitro anti-inflammatory activity compared to CTD and norcantharidin (NCTD). Based on the structure-activity relationship results of in vitro experiment, analogue 3i was chosen for further study. Results from the acute toxicity in mice showed that 3i was hypotoxic with the single-dose MTD (maximum tolerated dose) for oral administration is over 1852 mg/kg, at least 35-fold lower than that of NCTD. Mechanism study indicated that 3i could potently inhibit TNF-α induced activation of NF-κB signaling by down-regulation the expression levels of phosphor- IKK, IκBα, and NF-κB p65, and alleviated dextran sulfate sodium-induced colitis in mice. This study indicated that CTD analogues with alkynyl substitution at C5 position of 7-oxabicyclo [2.2.1]heptane core is a kind of new compounds with good anti-inflammatory activity and lower toxicity in vivo, and might be used as therapeutic agents for inflammatory diseases.

Photocatalytic synthesis of alkynylsulfones and alkenylsulfones using sulfonylhydrazides and alkynes.

An efficient and energy saving photocatalytic coupling reaction of benzenesulfonyl hydrazide with bromoacetylene has been reported. A series of alkynylsulfones were obtained in up to 98% yield. In addition, changing the base from KHCO3 to KOAc can give the alkenylsulfone product. In addition, we tested the biological activity of some alkynylsulfone compounds and found that they exhibited excellent in vitro antioxidant activity by activating the Nrf2/ARE pathway, up to 8 fold.

Photocatalytic Alkynylation of Hydrosilanes via Hydrogen Atom Transfer.

Alkynylsilanes are significant structural units frequently used in synthetic chemistry, medicinal chemistry, functional materials, and life sciences. Herein, we report a method for using a hydrogen atom transfer (HAT) strategy in combination with visible-light-driven photocatalysis to achieve a direct coupling reaction between benzene sulfonyl acetylene and tertiary silanes, and a diverse alkynylation of hydrosilanes in the presence of reactive groups was achieved with this strategy. It is important to note that dihydroalkyl/aryl silanes are also suitable for the protocol of HAT photocatalytic of 4CzIPN and quinuclidine.

Effect of Sodium Dodecyl Sulfate on Stability of MXene Aqueous Dispersion.

MXenes suffer from severe oxidation and progressive degradation in aqueous media due to its poor chemical stability. Herein, sodium dodecyl sulfate (SDS) is employed as an efficient protectant for long-term storage of Ti3 C2 Tx -MXene aqueous dispersion. Experimental data support SDS's capability to protect oxidation-prone sites on Ti3 C2 Tx nanosheets, providing extended colloidal stability of up to 213 days. Concentration-dependent anti-oxidation effect articulates that 1.5 mg mL-1 is deemed as an ideal SDS dose for Ti3 C2 Tx to achieve optimal oxidation-resistance in aqueous solution. Additionally, a chroma strategy is developed to instantly and precisely measure the oxidation degree of Ti3 C2 Tx . Adsorption-driven anti-oxidation efficacy of SDS is further confirmed by optimized conformations with interaction energies of SDS on termination-free and surface-defective Ti3 C2 Tx through multiscale simulations. This proposed route is a step forward in broadening the horizons of experimental and theoretical investigations of MXenes with promising implications for long-term storage and reliable applications.

Progression in the Oxidation Stability of MXenes.

MXenes are under the spotlight due to their versatile physicochemical characteristics. Since their discovery in 2011, significant advancements have been achieved in their synthesis and application sectors. However, the spontaneous oxidation of MXenes, which is critical to its processing and product lifespan, has gotten less attention due to its chemical complexity and poorly understood oxidation mechanism. This perspective focuses on the oxidation stability of MXenes and addresses the most recent advancements in understanding and the possible countermeasures to limit the spontaneous oxidation of MXenes. A section is dedicated to the presently accessible methods for monitoring oxidation, with a discussion on the debatable oxidation mechanism and coherently operating factors that contribute to the complexity of MXenes oxidation. The current potential solutions for mitigating MXenes oxidation and the existing challenges are also discussed with prospects to prolong MXene's shelf-life storage and expand their application scope.

Divergent Radical Cyclization and Hydroaminoalkylation of N-Arylacrylamides Using Photoredox Catalysis.

The ability to selectively synthesize multiple products from the same sets of substrates is a highly appealing and challenging concept in synthetic chemistry. In this manuscript, we describe the visible-light photoredox intermolecular catalysis of N-arylacrylamides that are α-C-H functionalized with aryl tertiary amines. The photocatalyst acts as a chemical switch to trigger two different reaction pathways and to obtain two different products from the same starting material. Simple adjustments to the reaction conditions enable the divergent synthesis of the oxidative cyclizations or the addition products in good to high yields with excellent atom economy.

Enantioselective Transformations from Nitriles to NH2 -α-Tertiary Amines.

Organic molecules, containing one or more amine chiral centers, are very common to see in natural products and medicines. Although a large number of methods have been developed to afford enantiopure amines, most of the known approaches are limited with various reasons. For example, many methodologies start from nitrogen protected and activated substrates, which usually need multistep operations and seriously decrease the atom economy. Here we disclose a new catalytic strategy from commercial nitriles to high enantioselective α-tertiary primary amines in up to 90 % yield and 95 % enantiomeric excess. This transformation firstly undergoes an addition process of organolithium reagents to nitriles to generate the imine intermediates in situ. Subsequently, the most challenging step is by employing copper catalytic enantioselective addition of AllylBpin to the imine intermediates to form the final amines in one pot.

Photocatalyst-free visible light driven synthesis of gem-dihaloenones from alkynes, tetrahalomethanes and water.

Photocatalytic reactions, in particular, processes without photosensitisers, have attracted increased attention due to their green aspect and high economic value and are considered valuable tools in organic synthesis. A new practical photocatalytic system was investigated in this study, and it can efficiently produce gem-dihaloenones by combining terminal alkynes with tetrahalomethanes (BrCCl3 and CBr4) and water without a photocatalyst, and the yield can reach up to 87%. The catalytic system is straightforward, the raw materials are inexpensive and easy to obtain, and the operation is simple.

In situ encapsulation of abundant WP/Ni2P heterointerfaces in N,P co-doped two-dimensional carbon frameworks for boosting hydrogen evolution electrocatalysis.

Rational design of an efficient hydrogen evolution reaction (HER) electrocatalyst continues to be a significant challenge for large-scale application of renewable electrochemical energy devices. Herein, an in situ interface engineering strategy is elaborately developed to construct an advanced multi-active component HER electrocatalyst, in which abundant tungsten phosphide (WP) and nickel phosphide (Ni2P) heterogeneous interfaces are synchronously encapsulated in nitrogen and phosphorus co-doped two-dimensional carbon frameworks (WP-Ni2P@NPC) via convenient solid-phase reaction and subsequent high-temperature pyrolysis. In particular, the type of solid precursor has a critical impact on the formation of a flake-like nanoskeleton and abundant WP/Ni2P heterointerfaces. Moreover, the integration of metal phosphide leads to a high graphitization degree of the carbon backbone. Benefitting from the favorable material characteristics of the nitrogen and phosphorus co-doped graphitic nanostructures, and the heterogeneous interface interaction between WP and Ni2P, WP-Ni2P@NPC possesses superior HER electrocatalytic activity to a single active component catalyst. This work offers an efficient strategy for designing efficient catalysts.

Chiral Phosphoric Acid-Catalyzed Enantioselective Aza-Friedel-Crafts Addition of Naphthols with Isatin-Derived Ketimines.

The enantioselective Friedel-Crafts addition of naphthols with isatin-derived ketimines was developed with H8-BINOL-derived chiral biaryl phosphoric acid. A wide range of isatin-derived ketimines and naphthols were successfully applied and gave a series of chiral 3-amino-2-oxindoles in excellent yields with high optical purities.

Umpolung Reactivity of Imine Ester: Visible-Light Mediated Transfer Hydrogenation of α-Aryl Imino Esters by Phenylsilane and Water.

A visible-light mediated chemoselective transfer hydrogenation of α-aryl imino esters was demonstrated. The methodology allowed the efficient and practical preparation of α-amino acid esters. The mechanism of the reaction was probed by DFT calculations, and deuteration experiments indicated deuterium was introduced into amino acid esters efficiently (up to 99 % D ratio), enabling a feasible way to obtain deuterated amino acids using D2 O as a cheap deuterium source.

Preparation of N/O co-doped porous carbon by a one-step activation method for supercapacitor electrode materials.

Heteroatom-doped carbon materials used in supercapacitors are low in cost and demonstrate extraordinary performance. Here, ethylenediamine tetraacetic acid (EDTA) with intrinsic N and O elements is selected as a raw material for the preparation of heteroatom self-doped porous carbon. Furthermore, N/O self-doped porous carbon with a large surface area has been successfully prepared using K2CO3 as the activator. The derived sample with a 1 : 2 molar ratio of EDTA to K2CO3 (EK-2) demonstrates a porous structure, rich defects, a large surface area of 2057 m2 g-1 and a micropore volume of 0.25 cm3 g-1. Benefiting from high N content (2.89 at%) and O content (10.75 at%), EK-2 exhibits superior performance, including high capacitance of 325 F g-1 at 1 A g-1 and outstanding cycling stability with 96.8% retention after 8000 cycles at 10 A g-1, which strongly confirms its immense potential toward many applications. Additionally, the maximum energy density of EK-2 reaches was 17.01 W h kg-1 at a power density of 350 W kg-1 in a two-electrode system. This facile and versatile strategy provides a scalable approach for the batch synthesis of N/O co-doped carbonaceous electrode materials for energy storage.