The genomes of seven economic Caesalpinioideae trees provide insights into polyploidization history and secondary metabolite biosynthesis.

The Caesalpinioideae subfamily contains many well-known trees that are important for the sustainability of the economy and human health, but the lack of genomic resources hindered the breeding and utilization of these plants. Here, we present chromosome-level reference genomes for two food and industrial trees Gleditsia sinensis (921 Mb) and Biancaea sappan (872 Mb), three shade and ornamental trees Albizia julibrissin (705 Mb), Delonix regia (580 Mb) and Acacia confusa (566 Mb), as well as two pioneer and hedgerow trees Leucaena leucocephala (1,338 Mb) and Mimosa bimucronata (641 Mb). Phylogeny inference showed that the mimosoid clade has a much higher evolution rate than the other clades of Caesalpinioideae. Macrosynteny comparison showed that the fusion and broken of an unstable chromosome was responsible for the difference in the basic chromosome number 13 and 14 for Caesalpinioideae. After the ancient whole genome duplication shared by all Caesalpinioideae species (CWGD, ∼72.0 MYA), we found two recent successive WGD events LWGD-1 (16.2-19.5 MYA) and LWGD-2 (7.1-9.5 MYA) in L. leucocephala. Then, ∼40% gene loss and genome size contraction occurred during the diploidization process in L. leucocephala. For the secondary metabolites, we identified all the gene copies involved in mimosine metabolism for these species and revealed that the abundance of mimosine biosynthesis genes in L. leucocephala largely explains its high mimosine production. Moreover, we identified all the potential genes involved in triterpenoid saponin biosynthesis in G. sinensis, which is more complete than the previous transcriptome-derived unigenes. Our analyzing results and the genomic resources will facilitate the biological studies of Caesalpinioideae and promote the utilization of valuable secondary metabolites.

Triton X-100 counteracts antibiotic resistance of Enterococcus faecalis: An in vitro study.

OBJECTIVES: The high prevalence of antibiotic-resistant bacteria poses a threat to the global public health. The appropriate use of adjuvants to restore the antimicrobial activity of antibiotics against resistant bacteria could be an effective strategy for combating antibiotic resistance. In this study, we investigated the counteraction of Triton X-100 (TX-100) and the mechanisms underlying the antibiotic resistance of Enterococcus faecalis (E. faecalis). METHODS: Standard, wild-type (WT), and induced antibiotic-resistant E. faecalis strains were used in this study. In vitro antibacterial experiments were conducted to evaluate the antimicrobial activities of gentamicin sulfate and ciprofloxacin hydrochloride in the presence and absence of 0.02 % TX-100 against both planktonic and biofilm bacteria. Transcriptomic and untargeted metabolomic analyses were performed to explore the molecular mechanisms of TX-100 as an antibiotic adjuvant. Additionally, membrane permeability, membrane potential, glycolysis-related enzyme activity, intracellular adenosine triphosphate (ATP), and expression levels of virulence genes were assessed. The biocompatibility of different drug combinations was also evaluated. RESULTS: A substantially low TX-100 concentration improved the antimicrobial effects of gentamicin sulfate or ciprofloxacin hydrochloride against antibiotic-resistant E. faecalis. Mechanistic studies demonstrated that TX-100 increased cell membrane permeability and dissipated membrane potential. Moreover, antibiotic resistance and pathogenicity of E. faecalis were attenuated by TX-100 via downregulation of the ABC transporter, phosphotransferase system (PTS), and ATP supply. CONCLUSIONS: TX-100 enhanced the antimicrobial activity of gentamicin sulfate and ciprofloxacin hydrochloride at a low concentration by improving antibiotic susceptibility and attenuating antibiotic resistance and pathogenicity of E. faecalis. CLINICAL SIGNIFICANCE: These findings provide a theoretical basis for developing new root canal disinfectants that can reduce antibiotic resistance.

Role of umbilical cord mesenchymal stromal cells in skin rejuvenation.

Aging is the main cause of many degenerative diseases. The skin is the largest and the most intuitive organ that reflects the aging of the body. Under the interaction of endogenous and exogenous factors, there are cumulative changes in the structure, function, and appearance of the skin, which are characterized by decreased synthesis of collagen and elastin, increased wrinkles, relaxation, pigmentation, and other aging characteristics. skin aging is inevitable, but it can be delayed. The successful isolation of mesenchymal stromal cells (MSC) in 1991 has greatly promoted the progress of cell therapy in human diseases. The International Society for Cellular Therapy (ISCT) points out that the MSC is a kind of pluripotent progenitor cells that have self-renewal ability (limited) in vitro and the potential for mesenchymal cell differentiation. This review mainly introduces the role of perinatal umbilical cord-derived MSC(UC-MSC) in the field of skin rejuvenation. An in-depth and systematic understanding of the mechanism of UC-MSCs against skin aging is of great significance for the early realization of the clinical transformation of UC-MSCs. This paper summarized the characteristics of skin aging and summarized the mechanism of UC-MSCs in skin rejuvenation reported in recent years. In order to provide a reference for further research of UC-MSCs to delay skin aging.

Dental pulp regeneration strategies: A review of status quo and recent advances.

Microorganisms, physical factors such as temperature or mechanical injury, and chemical factors such as free monomers from composite resin are the main causes of dental pulp diseases. Current clinical treatment methods for pulp diseases include the root canal therapy, vital pulp therapy and regenerative endodontic therapy. Regenerative endodontic therapy serves the purpose of inducing the regeneration of new functional pulp tissues through autologous revascularization or pulp tissue engineering. This article first discusses the current clinical methods and reviews strategies as well as the research outcomes regarding the pulp regeneration. Then the in vivo models, the prospects and challenges for regenerative endodontic therapy were further discussed.

Advantages and Challenges of Total-Body PET/CT at a Tertiary Cancer Center: Insights from Sun Yat-sen University Cancer Center.

In recent decades, researchers worldwide have directed their efforts toward enhancing the quality of PET imaging. The detection sensitivity and image resolution of conventional PET scanners with a short axial field of view have been constrained, leading to a suboptimal signal-to-noise ratio. The advent of long-axial-field-of-view PET scanners, exemplified by the uEXPLORER system, marked a significant advancement. Total-body PET imaging possesses an extensive scan range of 194 cm and an ultrahigh detection sensitivity, and it has emerged as a promising avenue for improving image quality while reducing the administered radioactivity dose and shortening acquisition times. In this review, we elucidate the application of the uEXPLORER system at the Sun Yat-sen University Cancer Center, including the disease distribution, patient selection workflow, scanning protocol, and several enhanced clinical applications, along with encountered challenges. We anticipate that this review will provide insights into routine clinical practice and ultimately improve patient care.

Computational evaluation of wire position using separate vertical wire technique and candy box technique for the fixation of inferior pole patellar fractures: a finite element analysis.

The separate vertical wire (SVW) technique and the improved candy box (CB) technique have been proposed for treating inferior pole patellar fractures. However, there is still a lack of clear explanation regarding the location of the wire passing through the patella. Five models of SVW techniques were established in different positions. Finite element analysis was then conducted to determine the optimal bone tunnel position for the SVW technique. Based on these findings, six groups of finite element models were created for CB techniques. The maximum displacement and stress on both the patella and steel wire were compared among these groups under 100-N, 200-N, 300-N, 400-N, and 500-N force loads. The results indicated that, in the SVW technique, the steel wire group near the fracture end of the longitudinal bone tunnel showed minimal displacement and stress on the patella when subjected to different forces. On the other hand, in the CB technique, both the patella and wire experienced minimal stress when a transverse bone tunnel wire was placed near the upper posterior aspect of patella. In conclusion, the SVW technique may require the bone tunnel wire to be positioned near the fractured end of the lower pole of the patella. On the other hand, in CB technique, the transverse bone tunnel wire passing through the patella may be close to its upper posterior aspect. However, further validation is necessary through comprehensive finite element analysis and additional biomechanical experiments.

Comparison of clinical characteristics and disease burden of febrile seizures in children with and without COVID-19.

BACKGROUND: Febrile seizures (FS) are the most common seizure disorder in children and a common neurologic complication in children with coronavirus disease 2019 (COVID-19). This study aimed to identify differences in clinical characteristics and disease burden between FS with and without COVID-19. MATERIALS AND METHODS: We conducted a retrospective analysis of medical data at our hospital from December 2019 to July 2023, focusing on hospitalized patients under the age of 14 diagnosed with FS who underwent COVID-19 polymerase chain reaction (PCR) testing. Descriptive statistics and analysis of variance were employed to compare the COVID-19 and non-COVID-19 groups in terms of clinical characteristics and disease burden. RESULTS: A total of 514 patients were included, with 106 testing positive for COVID-19 and 408 testing negative. Patients with COVID-19 were older (34.87 ± 6.16 vs. 28.61 ± 11.35 months, P < 0.001) and had a higher proportion of males (79.2% vs. 62.3%, P = 0.001). The COVID-19 group had longer seizure durations (4.57 ± 4.38 vs. 3.22 ± 2.91 min, P = 0.006) and more complex FS (25.5% vs. 15.9%, P = 0.022). Laboratory tests showed lower lymphocyte counts in the COVID-19 group (1.87 ± 1.48 vs. 2.75 ± 1.51 × 103/µL, P < 0.001) and higher creatine kinase levels (158.49 ± 82.89 vs. 110.89 ± 56.11 U/L, P < 0.001). No significant differences were found in hospital costs, length of hospitalization, and intensive care unit admissions. CONCLUSION: Clinicians should be knowledgeable about the distinct clinical characteristics of FS in children with COVID-19. Despite distinct features, the prognosis remains favorable and does not require excessive intervention. Ongoing monitoring and research are needed to fully understand the impact of COVID-19 on FS and optimize management strategies.

Micro-computed tomographic evaluation on the quality of single-cone obturation using a modified passive-deflation sealer injection needle: an in vitro study.

OBJECTIVES: This study aimed to design a modified passive-deflation sealer injection needle and investigate its ability to improve obturation quality of single-cone technique through assessing the distribution of voids in root canals using micro-computed tomography (micro-CT). MATERIALS AND METHODS: Forty-eight mandibular incisors were divided into eight groups (n = 6), according to the taper of root canal preparation (0.06 or 0.04), the needle used for sealer injection (modified or commercial iRoot SP injection needle), and the obturation method (iRoot SP sealer-only or single-cone obturation). After obturation, each specimen was scanned by micro-CT. The volumetric percentage and distribution of all voids were first analyzed and compared among groups, then the open and closed voids were separately analyzed and compared among single-cone obturation groups. RESULTS: Compared to commercial needle groups, modified needle groups showed much less voids, especially in the apical root canal part (P < 0.05). Besides, the modified needle groups produced much less open voids than commercial needle groups despite the root canal taper (P < 0.05). CONCLUSIONS: The modified passive deflation sealer injection needle could effectively improve the quality of single-cone obturation through reducing intra-canal voids, especially open voids throughout the root canal, thus might possibly be developed as an effective intra-canal sealer delivering instrument.

Sweat permeable and ultrahigh strength 3D PVDF piezoelectric nanoyarn fabric strain sensor.

Commercial wearable piezoelectric sensors possess excellent anti-interference stability due to their electronic packaging. However, this packaging renders them barely breathable and compromises human comfort. To address this issue, we develop a PVDF piezoelectric nanoyarns with an ultrahigh strength of 313.3 MPa, weaving them with different yarns to form three-dimensional piezoelectric fabric (3DPF) sensor using the advanced 3D textile technology. The tensile strength (46.0 MPa) of 3DPF exhibits the highest among the reported flexible piezoelectric sensors. The 3DPF features anti-gravity unidirectional liquid transport that allows sweat to move from the inner layer near to the skin to the outer layer in 4 s, resulting in a comfortable and dry environment for the user. It should be noted that sweating does not weaken the piezoelectric properties of 3DPF, but rather enhances. Additionally, the durability and comfortability of 3DPF are similar to those of the commercial cotton T-shirts. This work provides a strategy for developing comfortable flexible wearable electronic devices.

Assessing recent recurrence after hepatectomy for hepatitis B-related hepatocellular carcinoma by a predictive model based on sarcopenia.

BACKGROUND: Sarcopenia may be associated with hepatocellular carcinoma (HCC) following hepatectomy. But traditional single clinical variables are still insufficient to predict recurrence. We still lack effective prediction models for recent recurrence (time to recurrence < 2 years) after hepatectomy for HCC. AIM: To establish an interventable prediction model to estimate recurrence-free survival (RFS) after hepatectomy for HCC based on sarcopenia. METHODS: We retrospectively analyzed 283 hepatitis B-related HCC patients who underwent curative hepatectomy for the first time, and the skeletal muscle index at the third lumbar spine was measured by preoperative computed tomography. 94 of these patients were enrolled for external validation. Cox multivariate analysis was per-formed to identify the risk factors of postoperative recurrence in training cohort. A nomogram model was developed to predict the RFS of HCC patients, and its predictive performance was validated. The predictive efficacy of this model was evaluated using the receiver operating characteristic curve. RESULTS: Multivariate analysis showed that sarcopenia [Hazard ratio(HR) = 1.767, 95%CI: 1.166-2.678, P < 0.05], alpha-fetoprotein ≥ 40 ng/mL (HR = 1.984, 95%CI: 1.307-3.011, P < 0.05), the maximum diameter of tumor > 5 cm (HR = 2.222, 95%CI: 1.285-3.842, P < 0.05), and hepatitis B virus DNA level ≥ 2000 IU/mL (HR = 2.1, 95%CI: 1.407-3.135, P < 0.05) were independent risk factors associated with postoperative recurrence of HCC. Based on the sarcopenia to assess the RFS model of hepatectomy with hepatitis B-related liver cancer disease (SAMD) was established combined with other the above risk factors. The area under the curve of the SAMD model was 0.782 (95%CI: 0.705-0.858) in the training cohort (sensitivity 81%, specificity 63%) and 0.773 (95%CI: 0.707-0.838) in the validation cohort. Besides, a SAMD score ≥ 110 was better to distinguish the high-risk group of postoperative recurrence of HCC. CONCLUSION: Sarcopenia is associated with recent recurrence after hepatectomy for hepatitis B-related HCC. A nutritional status-based prediction model is first established for postoperative recurrence of hepatitis B-related HCC, which is superior to other models and contributes to prognosis prediction.

Trigonometric-spline dwell time scheduling and real-time interpolator under dynamic constraints for deterministic polishing.

Dwell time scheduling is a critical stage of deterministic polishing for ultra-precision fabrication of optics. Recently the dwell time algorithms for deterministic polishing have been widely studied. Nevertheless, there exist some shortcomings when those methods were applied in the industry, including low computational efficiency, large memory consumption, insufficiently-considered dynamic constraints, poor smoothness of the feedrate profile, and reliance on non-open CNC interpolator. To overcome those deficiencies, this work proposes a highly-efficient dwell time algorithm under the dynamic constraints of machine tools. The method calculates the initial dwell time density (DTD) sequence through non-blind deconvolution algorithm, and provides the feasible set of DTD profiles based on trigonometric-spline model. And the DTD repairing tactics are developed based on a self-adaptive offset algorithm under confined feedrate and acceleration. Finally, a C1-continuous DTD profile satisfying dynamic constraints is generated. A real-time interpolator based on trigonometric-spline DTD profile is developed. The simulation results show that the proposed method generates a C1-continuous feedrate profile rigidly respecting dynamic constraints, and preserves the ideal dwell time gradient distribution, achieving a more ideal residual error with high computational efficiency compared with the previous methods. The comparative experiments demonstrate that the proposed method performs better in suppressing the multi-frequency errors compared with the previous methods, and achieves high computational efficiency. The algorithm is applicable to highly-precise and highly-efficient fabrication of large-aperture optical components.

A novel surgical treatment approach for the vertical root fracture of posterior teeth: a case report with 24-month review.

BACKGROUND: Up to 25% of the tooth extraction after root canal treatment could be attributed to the vertical root fracture (VRF). The treatment choice for teeth with VRF would mostly be the extraction despite some repairing methods were also reported. The repairing treatment result of VRF would mostly depend on the fixation strength and the bioactivity of the repairing materials, especially for the posterior teeth with high masticating stresses. This case report designed a novel surgical treatment approach for the VRF of posterior teeth. METHODS: a maxillary premolar with buccal-palatal complete VRF was treated with a new dual-layered repairing approach using adhesive resin + iRoot BP Plus bioceramic cement to fill the modified fracture line with retention forms through the intentional replantation. RESULTS: At the 24-month review, the tooth showed desirable periodontal healing and normal function. CONCLUSIONS: This case report indicated that the dual-layered repairing approach might be effective for saving the posterior teeth with VRF. Nevertheless, further clinical trials are needed for its long-term result.

Spatial information extraction of fishing grounds for light purse seine vessels in the Northwest Pacific Ocean based on AIS data.

Ecological fishery management requires high-precision fishery information to support resource management and marine spatial planning. In this paper, the Automatic Identification System (AIS) was adopted to extract the spatial information on the fishing grounds of light purse seine vessels in the Northwest Pacific Ocean. The spatial distributions of fishing grounds mapped by the data mining, kernel density analysis and hotspot analysis methods were compared. The spatial similarity index was applied to determine the spatial consistency between the computed spatial information and fisheries resource information. Finally, the spatial information derived by the best method was used to investigate the characteristics of fishing activity. The results showed that: the speed of light purse seine vessels related to operations was lower than 1.6 knots. The spatial information extracted by the three methods was consistent with the catch data distribution, and the spatial similarity between the fishing effort and catch data was the highest. The spatial variation in fishing activity was similar to that in the chub mackerel migration route. AIS data could be used to provide high-resolution fishery information. Light purse seine fishing vessels typically operate and travel along the exclusive economic zone boundary, and increased attention must be given to fishing vessel operation supervision. A comprehensive supervision system can be employed to monitor the operations of fishing vessels more effectively. The results of this study can provide technical support for the management of fishing activities and conservation of marine resources in this region using AIS data.

Safe utilization and remediation potential of the mulberry-silkworm system in heavy metal-contaminated lands: A review.

Mulberry cultivation and silkworm rearing hold a prominent position in the agricultural industries of many Asian countries, contributing to economic growth, sustainable development, and cultural heritage preservation. Applying the soil-mulberry-silkworm system (SMSS) to heavy metal (HM)-contaminated areas is significant economically, environmentally, and socially. The ultimate goal of this paper is to review the main research progress of SMSS under HM stress, examining factors affecting its safe utilization and remediation potential for HM-contaminated soils. HM tolerance of mulberry and silkworms relates to their growth stages. Based on the standards for HM contaminants in various mulberry and silkworm products and the bioconcentration factor of HMs at different parts of SMSS, we calculated maximum safe Cd and Pb levels for SMSS application on contaminated lands. Several remediation practices demonstrated mulberry's ability to grow on barren lands, absorb various HMs, while silkworm excreta can adsorb HMs and improve soil fertility. Considering multiple factors influencing HM tolerance and accumulation, we propose a decision model to guide SMSS application in polluted areas. Finally, we discussed the potential of using molecular breeding techniques to screen or develop varieties better suited for HM-contaminated regions. However, actual pollution scenarios are often complex, requiring consideration of multiple factors. More large-scale applications are crucial to enhance the theoretical foundation for applying SMSS in HM pollution risk areas.

Discovery of N,N'-diarylurea molecules with activity against multidrug-resistant Staphylococcus aureus.

The emergence and global spread of methicillin-resistant Staphylococcus aureus (MRSA) pose a serious threat to public health, underscoring the urgent need for novel antibacterial interventions. Here, we screened 18 newly synthesized N,N'-diarylurea derivatives to identify compounds with activity against MRSA. Our investigations led to the discovery of a small molecule, SCB-24, which exhibited promising antimicrobial activity against MRSA USA300. Notably, SCB-24 demonstrated high activity even in the presence of 10% fetal bovine serum and showed excellent selectivity for bacterial over mammalian cells. SCB-24 also showed potent activity against various MRSA strains, including those resistant to second- and third-line antibiotics. Importantly, the efficacy of SCB-24 was inferior to that of vancomycin in MRSA-infected Galleria mellonella larvae. Overall, our findings suggest that SCB-24 has great potential as a new therapeutic for multidrug-resistant S. aureus infections.

Microvascular disease, modifiable risk factor profiles and incident arrhythmias in type 2 diabetes.

BACKGROUND: To assess the roles of diabetic microvascular disease and modifiable risk factors and their combination in the development of arrhythmias. METHODS: We included participants with type 2 diabetes (T2D) who were free of arrhythmias during recruitment in the UK Biobank study. The associations of microvascular disease states (defined by the presence of retinopathy, peripheral neuropathy or chronic kidney disease), four modifiable arrhythmic risk factors (body mass index, smoking, systolic blood pressure and glycosylated haemoglobin) and their joint associations with incident arrhythmias were examined. RESULTS: Among the 25 632 participants with T2D, 1705 (20.1%) of the 8482 with microvascular disease and 2017 (11.8%) of the 17 150 without microvascular disease developed arrhythmias during a median follow-up of 12.3 years. Having any of the three microvascular diseases was associated with a 48% increase in the hazard of developing arrhythmias. Incorporating microvascular disease states into a model alongside 11 traditional risk factors significantly enhanced arrhythmia prediction. Furthermore, individuals with microvascular disease who had optimal levels of zero to one, two, three or four arrhythmic risk factors showed an HR of 2.05 (95% CI 1.85, 2.27), 1.67 (95% CI 1.53, 1.83), 1.35 (95% CI 1.22, 1.50) and 0.91 (95% CI 0.73, 1.13), respectively, compared with those without microvascular disease. CONCLUSIONS: Although microvascular disease, a non-traditional risk factor, was associated with incident arrhythmias in individuals with T2D, having optimal levels of risk factors may mitigate this risk.

Mobile App Use among Persons with Fibromyalgia: A Cross-sectional Survey.

Persons with fibromyalgia experience a diverse set of symptoms. Recommendations for management generally focus on multidisciplinary approaches involving multiple modalities. Mobile apps can be an essential component for self-management, yet little is known about how persons with fibromyalgia use mobile apps for health-related purposes. A cross-sectional survey (N = 663) was conducted to understand the real-world use of apps among persons with fibromyalgia. The survey included 2 main foci: 1) eHealth literacy and use of information sources, and 2) mobile app use patterns and preferences for health-related purposes, including the types of apps used and usage characteristics of apps currently in use, as well as those that had been discontinued. Respondents' average eHealth literacy as measured by eHealth Literacy Scale (eHEALS) was 31.4 (SD = 7.1), and they utilized diverse information sources. Approximately two-thirds of the sample used mobile apps; the remaining one-third did not. Diverse health management needs were represented in the apps reported, including scheduling/time management, notetaking, fitness, and wellness. Compared to apps that had been discontinued, participants rated apps that they still used higher in terms of ease of use and used them more frequently. Reasons for discontinuing app use included issues with privacy, the effort required, lack of interest, and lack of perceived quality. Other reasons for app nonuse were lack of awareness and how-to knowledge, indicating that disseminating information about apps and addressing other barriers, such as providing user support, are critical to increasing uptake. These study findings can inform both app design and dissemination. PERSPECTIVE: This article presents how persons with fibromyalgia use mobile apps to manage their health. The findings could inform the development of digital interventions or programs for this population.

The combination of paeonol, diosmetin-7-O-ß-D-glucopyranoside, and 5-hydroxymethylfurfural from Trichosanthis pericarpium alleviates arachidonic acid-induced thrombosis in a zebrafish model.

Trichosanthis fruit (TF) is a classic medicinal material obtained from Shandong, China. The peel of this fruit (Trichosanthis pericarpium, TP) is known to exert anti-thrombotic effects. However, the anti-thrombotic active components and mechanisms of TP have yet to be fully elucidated. Combined with zebrafish models and high-performance liquid chromatography (HPLC), this study evaluated the endogenous anti-thrombotic effects with the combination of three compounds from TP. First, we used HPLC to investigate the components in the water extract of TP. Next, we used the zebrafish model to investigate the anti-thrombotic activity of the three compound combinations by evaluating a range of indicators. Finally, the expression of related genes was detected by real-time quantitative polymerase chain reaction (qPCR). HPLC detected a total of eight components in TP water extract, with high levels of paeonol (Pae), diosmetin-7-O-ß-D-glucopyranoside (diosmetin-7-O-glucoside), and 5-hydroxymethylfurfural (5-HMF). The most significant anti-thrombotic activity was detected when the Pae: diosmetin-7-O-glucoside:5-HMF ratio was 4:3:3. qPCR analysis revealed that the abnormal expression levels of f2, fga, fgb, vwf, ptgs1, and tbxas1 induced by arachidonic acid (AA) were improved. The combination of Pae, diosmetin-7-O-glucoside, and 5-HMF may alleviate AA-induced thrombosis by inhibiting the inflammatory reaction, coagulation cascade reaction, and arachidonic acid metabolism pathways.

Automatic detection system for steel skeleton size based on machine vision.

Currently, most buildings are constructed using prefabricated concrete slabs supported by a steel skeleton that is generally tied and welded manually. However, if the overall size of the skeleton is incorrect and this error is not noticed before the concrete is poured, then a huge waste is incurred by having to scrap all the prefabricated slabs. Therefore, we propose an automatic system for measuring the frame size needed for prefabricated slabs made of reinforced concrete using LabVIEW and the NI Vision library of machine-vision functions to perform image processing and machine-vision detection. A charge-coupled device camera obtained an overall image, and then, LabVIEW processed the image and extracted its features. The system compared the measured size with the design size and issued a warning if the two differ by more than 0.5 cm. From experimental comparison and verification, the maximum measurement error between the test results and the actual size was 2.7% and the root mean square error was 0.66%. This meets the requirements of actual site construction and provides a scientific reference for realizing the automatic detection of the skeleton size for reinforced-concrete precast slabs.

Effort expenditure modulates feedback evaluations involving self-other agreement: evidence from brain potentials and neural oscillations.

The influence of effort expenditure on the subjective value in feedback involving material reward has been the focus of previous research. However, little is known about the impact of effort expenditure on subjective value evaluations when feedback involves reward that is produced in the context of social interaction (e.g. self-other agreement). Moreover, how effort expenditure influences confidence (second-order subjective value) in feedback evaluations remains unclear. Using electroencephalography, this study aimed to address these questions. Event-related potentials showed that, after exerting high effort, participants exhibited increased reward positivity difference in response to self-other (dis)agreement feedback. After exerting low effort, participants reported high confidence, and the self-other disagreement feedback evoked a larger P3a. Time-frequency analysis showed that the high-effort task evoked increased frontal midline theta power. In the low (vs. high)-effort task, the frontal midline delta power for self-other disagreement feedback was enhanced. These findings suggest that, at the early feedback evaluation stage, after exerting high effort, individuals exhibit an increased sensitivity of subjective value evaluation in response to self-other agreement feedback. At the later feedback evaluation stage, after completing the low-effort task, the self-other disagreement feedback violates the individuals'high confidence and leads to a metacognitive mismatch.